Miniaturized Broadband Bi-Yagi Antenna Array for Ambient RF Energy Harvesting.

This paper presents a miniaturized broadband Bi-Yagi antenna array that covers a bandwidth from 1.79 GHz to 2.56 GHz. The proposed antenna achieves a tradeoff between maximizing bandwidth, effective area, and gain while minimizing physical dimensions. The antenna design considers the coupling between the radiator and director elements, resulting in increased bandwidth as the resonating modes shift apart. Additionally, the proposed design optimizes element spacing and dimensions to achieve high gain, wide bandwidth, efficient radiation, and a minimum aperture size. The proposed antenna, with physical dimensions of 138.6 mm × 47.7 mm × 1.57 mm, demonstrates gains ranging from 6.2 dBi to 9.34 dBi across the frequency range, with a total efficiency between 88% and 98%. The proposed design is experimentally validated by measuring the reflection coefficients, input impedance, gain, and normalized radiation pattern. These features make the antenna well suited for capturing and harvesting electromagnetic waves in mobile wireless and Wi-Fi applications.

A High-Performance Circularly Polarized and Harmonic Rejection Rectenna for Electromagnetic Energy Harvesting.

This paper presents a novel circularly polarized rectenna designed for efficient electromagnetic energy harvesting at the 2.45 GHz ISM band. A compact antenna structure is designed to achieve high performance in terms of radiation efficiency, axial ratio, directivity, effective area, and harmonic rejection over the entire bandwidth of the ISM frequency band. The optimized rectifier circuit enhances the RF harvested energy efficiency, with an AC-to-DC conversion efficiency ranging from 36% to 70% for low-level input power ranging from -10 dBm to 0 dBm. The stable output of DC power confirms the suitability of this design for various practical applications, including wireless sensor networks, energy harvesting power supplies, medical implants, and environmental monitoring systems. Experimental validation, which includes both the reflection coefficient and radiation patterns of the designed antenna, confirms the accuracy of the simulation. The study found that the proposed energy harvesting system has a high total efficiency ranging from 53% to 63% and is well-suited for low-power energy harvesting (0 dBm) from ambient electromagnetic radiation. The proposed circularly polarized rectenna is a competitive option for efficient electromagnetic energy harvesting, both as a standalone unit and in an array, due to its high performance, feasibility, and versatility in meeting various energy harvesting requirements. This makes it a promising and cost-effective solution for various wireless communication applications, offering great potential for efficient energy harvesting from ambient electromagnetic radiation.

Assessment of Silicone Rubber/Lead Oxide Composites Enriched with Bi2O3, WO3, BaO, and SnO2 Nanoparticles for Radiation Shielding Applications.

This study aimed to prepare silicone rubber composites with heavy metal oxide nanoparticles for gamma ray shielding applications. Different heavy metal oxide nanoparticles were incorporated into the silicone rubber matrix, and the prepared composites were characterized for their thermal, mechanical, and radiation shielding properties. The density of the prepared SR samples ranged from 1.25 to 2.611 g·cm-3, with SR-2 having the highest density due to the presence of lead oxide. Additionally, the thermal stability of the materials improved with the addition of HMO nanoparticles, as indicated by TGA results. The prepared SR materials showed ultimate deformation displacement ranging from 14.17 to 21.23 mm, with the highest value recorded for SR-3 and the lowest for SR-2. We investigated the transmission factor (TF) of gamma rays through silicone rubber (SR) composites with different heavy metal oxide (HMO) nanoparticles. The addition of HMOs resulted in a decrease in TF values, indicating improved radiation shielding performance. The TF was found to be lowest in SR-5, which contained 15% of Bi2O3, WO3, BaO, and Zr2O3 each. The linear attenuation coefficient (LAC) of the SR samples was also evaluated, and it was found that the incorporation of HMOs increased the probability of photon interactions, leading to improved radiation protection effectiveness. The half-value layer (HVL) of the SR samples was also examined, and it was found that the addition of HMOs resulted in a significant reduction in HVL values, particularly at low energy levels. SR-5 had the lowest HVL among the group, while SR-2, SR-3, and SR-4 had higher HVL values. These results demonstrate the effectiveness of using HMOs in enhancing the radiation shielding properties of SR composites, particularly for low-energy gamma rays.

A Wideband GRIN Dielectric Lens Antenna for 5G Applications.

This paper proposes a graded effective refractive indexes (GRIN) dielectric lens for 5G applications. The inhomogeneous holes in the dielectric plate are perforated to provide GRIN in the proposed lens. The constructed lens employs a collection of slabs that correspond to the specified graded effective refractive index. The thickness and the whole lens dimensions are optimized based on designing a compact lens with optimum lens antenna performance (impedance matching bandwidth, gain, 3 dB beamwidth, and sidelobe level). A wideband (WB) microstrip patch antenna is designed to be operated over the entire band of interest from 26 GHz to 30.5 GHz. For the 5G mm-wave band of operation, the behavior of the proposed lens along with a microstrip patch antenna is analyzed at 28 GHz for various performance parameters, including impedance matching bandwidth, 3 dB beamwidth, maximum gain, and sidelobe level. It has been observed that the antenna exhibits good performance over the entire band of interest in terms of gain, 3 dB beamwidth, and sidelobe level. The numerical simulation results are validated using two different simulation solvers. The proposed unique and innovative configuration is well-suited for 5G high gain antenna solutions with a low-cost and lightweight antenna structure.

Mechanical, Morphological, Thermal and the Attenuation Properties of Heavy Mortars Doped with Nanoparticles for Gamma-Ray Shielding Applications.

This study aimed to develop a mortar composite with improved gamma ray shielding properties using WO3 and Bi2O3 nanoparticles, as well as granite residue as a partial replacement of sand. The physical properties and effects of sand substitution and nanoparticle addition on the mortar composite were analyzed. TEM analysis confirmed the size of Bi2O3 and WO3 NPs to be 40 ± 5 nm and 35 ± 2 nm, respectively. SEM images showed that increasing the percentage of granite residues and nanoparticles improved the homogeneity of the mixture and decreased the percentage of voids. TGA analysis indicated that the thermal properties of the material improved with the increase in nanoparticles, without decreasing the material weight at higher temperatures. The linear attenuation coefficients were reported and we found that the LAC value at 0.06 MeV increases by a factor of 2.47 when adding Bi2O3, while it is enhanced by a factor of 1.12 at 0.662 MeV. From the LAC data, the incorporation of Bi2O3 nanoparticles can greatly affect the LAC at low energies, and still have a small but noticeable effect at higher energies. The addition of Bi2O3 nanoparticles into the mortars led to a decrease in the half value layer, resulting in excellent shielding properties against gamma rays. The mean free path of the mortars was found to increase with increasing photon energy, but the addition of Bi2O3 led to a decrease in MFP and better attenuation, making the CGN-20 mortar the most ideal in terms of shielding ability among the prepared mortars. Our findings on the improved gamma ray shielding properties of the developed mortar composite have promising implications for radiation shielding applications and granite waste recycling.

Miniaturized Folded-Slot CubeSat MIMO Antenna Design with Pattern Diversity.

In this paper, a folded slot-based multiple-input-multiple-output (MIMO) antenna design for Cube Satellite (CubeSat) applications is presented for the ultra-high frequency (UHF) band. A unique combination of a reactively loaded meandered slot with a folded structure is presented to achieve the antenna's miniaturization. The proposed antenna is able to operate over a wide frequency band from 430~510 MHz. Moreover, pattern diversity is achieved by the antenna's element placement, resulting in good MIMO diversity performance. The four elements are placed on one Unit (1U) for CubeSat dimensions of 100 mm × 100 mm × 100 mm. The miniaturized antenna design with pattern diversity over a wide operating band is well suited for small satellite applications, particularly CubeSats in the UHF band.

Anisotropy Characterization of Metallic Lens Structures.

This paper presents a full electromagnetic (EM) characterization of metallic lenses. The method is based on the utilization of free-space transmission and reflection coefficients to accurately obtain lenses' tensorial EM parameters. The applied method reveals a clear anisotropic behavior with a full tensorial directional permittivity and permeability and noticeably dispersive permeability and wave impedance. This method yields accurate values for the effective refractive index, wave impedance, permittivity, and permeability, unlike those obtained by simple methods such as the eigenmode method. These correct cell parameters affect their lens performance, as manifested in a clear level of anisotropy, impedance matching, and losses. The effect of anisotropy caused by oblique incidence on the performance and operation of lens designs is illustrated in a lens design case.

Reflectance and transmittance of terahertz waves from graphene embedded into metamaterial structures.

In this work, the theoretical study of the interaction of terahertz (THz) waves with graphene embedded into two different semi-infinite metamaterials was carried out. To model the graphene, the effective surface conductivity approach based on the Kubo formalism was used. In addition, two types of metamaterials, i.e., double-positive (DPS) and double-negative (DNG), were studied in the THz regime. The numerical modeling of metamaterials was performed in the framework of causality-principle-based Kramers-Kronig relations. The reflectance and transmittance from the graphene-embedded metamaterial structures are studied for the following four different configurations: DPS-Graphene-DPS, DPS-Graphene-DNG, DNG-Graphene-DPS, and DNG-Graphene-DNG. The influence of the chemical potential and scattering rate on the reflectance and transmittance for each configuration is analyzed. It is concluded that the DPS-Graphene-DPS and DNG-Graphene-DNG configurations behave as anti-reflectors for the THz waves, while the DPS-Graphene-DNG and DNG-Graphene-DPS configurations are suitable for THz reflector applications. Moreover, a parametric study revealed that the relative permittivity of the partnering metamaterial can be used as an additional degree of freedom to control the reflectance and transmittance of THz waves. In conclusion, the transmissive and reflective characteristics of THz waves can be controlled effectively with the appropriate choice of graphene parameters, as well as the configuration of metamaterial structures. The convergence of the analytical and numerical results is found with the published results under special conditions. The present work may have potential applications in the design of THz wave controllers, reflectors, absorbers, and anti-reflectors.

Classification and characterization of electromagnetic materials.

In this paper, we present an efficient method to classify complex electromagnetic materials. This method is based on the directional interaction of incident circularly polarized waves with the materials being tested. The presented method relies on an algorithm that classifies the test materials to one of the following categories: isotropic, chiral, bi-isotropic, symmetric anisotropic or general bianisotropic. The transmitted and reflected fields of right-handed and left-handed circularly polarized waves normally incident from three orthogonal orientations are utilized to determine the reflection/transmission coefficients and complex refractive indices. Both analytical and numerical solutions are used to compute fields of the circularly polarized waves from the arbitrary complex material slab. The complex materials are discriminated accordingly and then classified under an appropriate category. Additionally, new results for material characterization by extracting the scalar/tensorial parameters of bi-isotropic and gyrotropic materials are presented.