RESUMO
The effect of ultrasonic activation (UA) on marginal adaptation, intratubular penetration and bond strength provided by three calcium silicate-based sealers was evaluated. Ninety-six distobuccal root canals of maxillary molars were randomly divided into 8 groups (n = 12) according to the sealer and UA application: EndoSequence BC sealer (ESBC), Sealer Plus BC (SPBC) and Bio-C Sealer (BCS), using AH Plus (AH) as a control group. The specimens were sectioned at 2, 4 and 6 mm from the apex. The data were statistically analysed using Kruskall-Wallis, Dunn, Mann-Whitney and chi-squared tests. UA improved the marginal adaptation of ESBC (6 mm), SPBC (all levels), BCS (2/4 mm) and AH (4 mm) (p < 0.05); the bond strength of SBPC (2 mm) and BCS (6 mm) were also improved (p < 0.05). The UA of endodontic silicate-based sealers improved the marginal adaptation in all levels and the bond strength of SBPC and BCS sealer.
Assuntos
Materiais Restauradores do Canal Radicular , Humanos , Cálcio , Colagem Dentária , Resinas Epóxi/química , Teste de Materiais , Dente Molar , Materiais Restauradores do Canal Radicular/química , Silicatos , Ondas UltrassônicasRESUMO
AIM: To evaluate in a laboratory setting the performance of two reciprocating glide path systems, WaveOne Gold Glider (WO) and R-Pilot (RP), to create a glide path in mesial root canals of mandibular molars and to assess the torsional resistance of instruments after performing the glide path. METHODOLOGY: A total of 60 mesial root canals of extracted human mandibular molars were divided into two groups (n = 30) according to the glide path system to be used. The data from the volume of each canal, acquired by microcomputed tomography (micro-CT), were validated statistically for the anatomical pairing of the groups. Preparation time, frequency in gaining apical patency, plastic deformation rate of instruments, and canal transportation and centring ability were recorded and compared statistically. The torsional fatigue of the instruments after use was also evaluated. Data were analysed using Fisher's exact test and Mann-Whitney U-test with a 5% significance level. RESULTS: No significant differences were found between groups regarding the time required to perform the glide path, the frequency distributions of the canals classified as patent and the instruments with plastic deformation after use (P > 0.05). No significant differences were found between groups regarding the degree of canal transportation and centring ability at the cervical, middle and apical thirds (P > 0.05). The RP groups had significantly greater maximum torsional strength values compared with the WO groups (P < 0.05). The used WO group had greater angular deflection to fracture when compared to the new WO group (P < 0.05). A significant difference was also found in the percentage of loss of angular deflection in a comparison of the WO group with the RP group (P < 0.05). CONCLUSIONS: The WO and RP instruments performed the same in terms of preparation time, plastic deformation, gaining apical patency, degree of canal transportation and centring ability. The RP instruments had greater torsional strength, less angular deflection and lower percentage of loss in angular deflection than the WO. The used WO group had the greatest angular deflection values.
Assuntos
Cavidade Pulpar , Laboratórios , Instrumentos Odontológicos , Cavidade Pulpar/diagnóstico por imagem , Desenho de Equipamento , Humanos , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Preparo de Canal Radicular , Estatísticas não Paramétricas , Titânio , Microtomografia por Raio-XRESUMO
PURPOSE: Compare canal transportation and dentin removal using micro computed tomography (micro-CT) and measure instrumentation time in the root canal preparation of primary molars using K-files, ProDesign Logic and Reciproc files. METHODS: A representative sample of 81 root canals of primary molars was randomised into three groups: K-files (#15-40), ProDesign Logic (#25) and Reciproc (R25). A single-trained operator prepared all root canals. A standardised micro-CT evaluation was performed before and after instrumentation using the CTan® program. Instrumentation time was also recorded. Statistical analysis involved one-way ANOVA, Tukey's post hoc test, Kruskal-Wallis test and Dunn's test, considering a 5% level of significance. RESULTS: Reciproc led to more canal transportation than K-files and ProDesign Logic (p < 0.001) in middle third, whereas K-files led to the most canal transportation in the apical third (p = 0.017). ProDesign Logic and Reciproc removed less dentin on the opposite side of the root curvature in the apical third compared to K-files (p = 0.008). Instrumentation time was better with ProDesign Logic and Reciproc than K-files (p < 0.001). CONCLUSION: ProDesign Logic demonstrated good results with regard to canal transportation and required less instrumentation time in primary molars. Reciproc and K-files led to the most canal transportation in the middle and apical third, respectively.
Assuntos
Cavidade Pulpar , Preparo de Canal Radicular , Cavidade Pulpar/diagnóstico por imagem , Humanos , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Dente Decíduo , Microtomografia por Raio-XRESUMO
AIM: To evaluate the influence of larger apical canal enlargement in curved canals using reciprocating systems subjected to various heat treatments. METHODOLOGY: Ninety mandibular premolars with root curvatures ranging from 20° to 30° were selected and scanned by microcomputed tomography (micro-CT) before and after root canal preparation with reciprocating systems (n = 30): Reciproc Blue (RB size 25, .08 taper and size 40, .06 taper; VDW, Munich, Germany), WaveOne Gold (WOG size 25, .07 taper and size 35, .06 taper; Dentsply Sirona, Ballaigues, Switzerland) and ProDesign R (PDR size 25, .06 taper and size 35, .05 taper; Easy Dental Equipment, Belo Horizonte, Brazil). Canal transportation, untouched areas, and apical and total root canal volumes were measured. Statistical analysis was performed with the nonparametric Kruskal-Wallis and Dunn's tests and a significance level set at 5%. RESULTS: The between-group comparison revealed no significant difference in untouched areas, canal transportation, and apical root canal volume among the groups (P > 0.05). However, WOG size 35, .06 taper was associated with a significant increase in the percentage of total canal volume in comparison to the PDR size 35, .05 taper (P < 0.05). The within-group comparison revealed a significant decrease in untouched areas, increase in apical and total root canal volume for all groups when using a larger instrument (P < 0.05). There was no significant difference in transportation among the groups and when a larger apical preparation was created (P > 0.05). CONCLUSIONS: Larger apical enlargement of curved canals was associated with a decrease in untouched areas, an increase in root canal volume and maintenance of canal trajectory. In addition, all systems were safe and provided similar root canal shapes.
Assuntos
Instrumentos Odontológicos , Temperatura Alta , Brasil , Cavidade Pulpar , Desenho de Equipamento , Alemanha , Preparo de Canal Radicular , Microtomografia por Raio-XRESUMO
AIM: To evaluate the influence of three engine-driven NiTi file systems manufactured from different NiTi alloys for the preparation of second mesiobuccal (MB2) canals in extracted maxillary first molars using a micro-computed tomographic (micro-CT) scanner. METHODOLOGY: Thirty maxillary molars with two canals in the mesiobuccal root were selected and randomly divided into three groups (n = 10): Reciproc [REC; size 25, .08 taper; VDW, Munich, Germany], ProDesign R [PDR; size 25, .06 taper; Easy, Belo Horizonte, Brazil] and Mtwo [MO; size 25, .06 taper; VDW, Munich, Germany]. Before and after root canal preparation of the MB2 canal, the teeth were scanned using a micro-CT to evaluate canal transportation, centring ability, dentine thickness and volume change. The working time to achieve working length was also evaluated. All parameters were compared statistically using the Kruskal-Wallis and Dunn test for multiple comparisons, with a significance level of 5%. RESULTS: There was no significant difference amongst the groups regarding canal transportation and centring ability (P > 0.05). However, the PDR size 25, .06 taper group had significantly lower canal volume and volume of dentine removal compared with a MO size 25, .06 taper and REC size 25, .08 taper (P < 0.05). A root perforation was detected in MO size 25, .06 taper and REC size 25, .08 taper groups, respectively. Regarding the working time, the PDR size 25, .06 taper required a significantly longer time to achieve working length than MO size 25, .06 taper and REC size 25, .08 taper (P < 0.05). CONCLUSIONS: All NiTi systems had similar canal transportation, centring ability and increase in apical volume after preparation of MB2 canals. However, the PDR size 25, .06 taper had less volume of dentine removal, absence of root canal perforation and required a longer time to accomplish the root canal preparation.
Assuntos
Níquel , Titânio , Ligas , Brasil , Cavidade Pulpar , Alemanha , Dente Molar , Preparo de Canal Radicular , Microtomografia por Raio-XRESUMO
AIM: To evaluate apical transportation and centring ability during root canal preparation in mesial root canals of mandibular molars associated with ProTaper Gold (PTG), ProDesign S (PDS), Hyflex CM (HCM), Hyflex EDM and ProDesign Logic (PDL). METHODOLOGY: Sixty mandibular first molars with two separate canals in the mesial root were selected after root anatomy pairing by microcomputed tomography (microCT). The teeth were randomly divided into five groups (n = 24); the root canal volume was calculated to ensure sample homogeneity. All the root canals were prepared up to size 25 in accordance with the instructions of each rotary system manufacturer. After root canal preparation, the teeth were scanned by microCT to analyse apical transportation, root canal centralization and the pre- and post-preparation root canal volume at the apical and cervical levels. Kruskal-Wallis and Dunn tests were used for comparisons amongst groups for transportation values. For volume changes, the parametric ANOVA and Tukey's tests were used RESULTS: There were no significant differences in apical transportation amongst the rotary systems (P > 0.05). All the systems created apical transportation; values ranging from 0.031 mm (PDL) to 0.072 mm (PTG), and enlargements between 39% (HCM) and 91.1% (PDS) were observed. In relative to cervical transportation, significant differences were observed amongst the systems (P < 0.05). Mean transportation values between 0.07 mm (HCM) and 0.172 mm (PTG) were found, with enlargements between 35.4% (HCM) and 51.5% (PDS). CONCLUSION: All the thermally treated systems resulted in similar apical transportation. In the cervical region, the Hyflex CM and Prodesign Logic systems were associated with more centred preparations.
Assuntos
Ligas Dentárias/química , Instrumentos Odontológicos , Níquel/química , Preparo de Canal Radicular/instrumentação , Titânio/química , Cavidade Pulpar/diagnóstico por imagem , Desenho de Equipamento , Temperatura Alta , Humanos , Técnicas In Vitro , Teste de Materiais , Dente Molar , Propriedades de Superfície , Microtomografia por Raio-XRESUMO
AIM: To evaluate the torsional properties of pathfinding nickel-titanium (NiTi) rotary instruments manufactured from several NiTi alloys, ProGlider (M-wire), Hyflex GPF (conventional NiTi Wire and controlled memory wire), Logic (conventional NiTi wire and controlled memory wire) and Mtwo (conventional NiTi wire). METHODOLOGY: A total of 56 NiTi instruments from Glidepath rotary systems (n = 8) were used: Logic (size 25, .01 taper), Logic CM (size 25, .01 taper), ProGlider (size 16, .02 taper), Hyflex GPF (size 15, .01 taper), Hyflex GPF CM (size 15, .02 taper; size 20, .02 taper) and Mtwo (size 10, .04 taper). The torsion tests were performed based on ISO 3630-1 (1992). Three millimetres of each instrument tip was clamped to a small load cell by a lever arm linked to the torsion axis. Data were analysed using a one-way analysis of variance (anova) and Tukey test with a significance level at a = 5%. RESULTS: The Logic size 25, .01 taper had significantly higher torsional strength values (P < 0.05). The ProGlider was significantly different when compared with Hyflex GPF size 15, .01 taper and size 15, .02 taper (P < 0.05). The Logic CM size 25, .01 taper had significantly higher torsional strength than Hyflex GPF size 15, .01 taper and size 15, .02 taper (P < 0.05). No difference was found amongst Mtwo size 10, .04 taper and Hyflex GPF groups (size 15, .01 taper; size 15, .02 taper; size 20, .02 taper). In relation to the angle of rotation, Logic CM size 25, .01 taper and Hyflex GPF size 15, .01 taper had the highest angle values (P < 0.05). The ProGlider had the lowest angle values in comparison with all the groups (P < 0.05) followed by Mtwo size 10, .04 taper. The Logic size 25, .01 taper had significantly higher angle of rotation values than ProGlider and Mtwo size 10, .04 taper (P < 0.05). CONCLUSION: The Logic size 25, .01 taper instrument made of conventional NiTi alloy had the highest torsional strength of all instruments tested. In addition, the ProGlider instrument manufactured from M-Wire alloy had the lowest angle of rotation to fracture in comparison with the other instruments.
Assuntos
Ligas Dentárias/química , Instrumentos Odontológicos , Níquel/química , Titânio/química , Torção Mecânica , Desenho de Equipamento , Falha de Equipamento , Teste de Materiais , Microscopia Eletrônica de Varredura , Tratamento do Canal Radicular/instrumentação , Estresse MecânicoRESUMO
AIM: To assess the effect of 90°-oscillatory instrumentation with hand files on several morphological parameters (volume, surface area and uninstrumented surface) in C-shaped root canals after instrumentation using a single-file reciprocation system (Reciproc; VDW, Munich, Germany) and a Self-Adjusting File System (SAF; ReDent Nova, Ra'anana, Israel). METHODOLOGY: Twenty mandibular second molars with C-shaped canals and C1 canal configurations were divided into two groups (n = 10) and instrumented with Reciproc and SAF instruments. A size 30 NiTi hand K-file attached to a 90°-oscillatory motion handpiece was used as final instrumentation in both groups. The specimens were scanned using micro-computed tomography after all procedures. Volume, surface area increase and uninstrumented root canal surface were analysed using CTAn software (Bruker-microCT, Kontich, Belgium). Also, the uninstrumented root canal surface was calculated for each canal third. All values were compared between groups using the Mann-Whitney test and within groups using the Wilcoxon's signed-rank test. RESULTS: Instrumentation with Reciproc significantly increased canal volume compared with instrumentation with SAF. Additionally, the canal volumes were significantly increased after 90°-oscillatory instrumentation (between and within group comparison; (P < 0.05)). Regarding the increase in surface area after all instrumentation protocols, statistical analysis only revealed significant differences in the within groups comparison (P < 0.05). Reciproc and SAF instrumentation yielded an uninstrumented root canal surface of 28% and 34%, respectively, which was not significantly different (P > 0.05). Final oscillatory instrumentation significantly reduced the uninstrumented root canal surface from 28% to 9% (Reciproc) and from 34% to 15% (SAF; P < 0.05). The apical and middle thirds exhibited larger uninstrumented root canal surfaces after the first instrumentation that was significantly reduced after oscillatory instrumentation (P < 0.05). CONCLUSIONS: The Reciproc and SAF system were associated with similar morphological parameters after instrumentation of mandibular second molars with C-shaped canals except for a higher canal volume increase in the Reciproc group compared to the SAF. Furthermore, the final use of 90°-oscillatory instrumentation using NiTi hand files significantly decreased the uninstrumented canal walls that remained after Reciproc and SAF instrumentation.
Assuntos
Tratamento do Canal Radicular/instrumentação , Cavidade Pulpar/diagnóstico por imagem , Cavidade Pulpar/cirurgia , Humanos , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Níquel , Tratamento do Canal Radicular/métodos , Titânio , Microtomografia por Raio-XRESUMO
AIM: To use micro-CT to quantitatively evaluate the amount of residual filling material after using several techniques to remove root fillings with and without ultrasonic activation and to analyse the cleanliness of the root canal walls and dentine tubules with scanning electron microscopy (SEM). METHODOLOGY: The root canals of one hundred and eight human mandibular incisors were selected and instrumented with rotary files using the BioRace system up to file size 40, .04 taper. After instrumentation, the teeth were filled using a hybrid technique with gutta-percha and sealer then divided into three groups according to the method used for removing the root filling: G1-Reciproc (using only instrument R50), G2-ProTaper Universal retreatment system and G3-Manual (hand files and Gates-Glidden burs). All groups were divided into two subgroups depending on whether ultrasonic agitation was used with the irrigants. Micro-CT scans were taken before and after removal of the filling material to detect residual material in the canal. After micro-CT analysis, the roots were cut in half, imaged by SEM and scored based on the amount of surface covered by root filling remnants. The data were analysed statistically using a significance level of 5%. RESULTS: All groups had retained material in the root canals after instrumentation. The Reciproc method was associated with less retained material than the ProTaper and Manual methods. Ultrasonic activation significantly reduced the amount of residual root filling in all groups (P < 0.05). CONCLUSION: None of the instrumentation methods were able to completely remove root filling material. Ultrasonic activation improved the removal of root filling material in all groups.
RESUMO
Cholestasis of pregnancy induces alterations in bile acid transport by human trophoblast plasma membrane (TPM) vesicles. We investigated whether maternal cholestasis affects the overall ability of the rat placenta to carry out vectorial bile acid transfer from the fetus to the mother. Complete obstructive cholestasis (OCP) was maintained during the last week of pregnancy and released at term (day 21), before experiments were performed. In situ single-pass perfusion of one placenta per rat with 250 nmol [(14)C]glycocholic acid (GC) revealed an impaired uptake in OCP rats (2.28 vs. 5.53 nmol in control rats). Approximately 100% of GC taken up by control placentas was secreted in maternal bile over 120 minutes (5.38 nmol), whereas this was only 61% (1.40 nmol) of the GC taken up by OCP placentas. When 5 nmol GC was administered through the jugular vein no significant difference between both groups in total GC bile output was found. The efficiency (V(max)/K(M)) of adenosine triphosphate (ATP)-dependent GC transport by vesicles from the maternal side of TPM was decreased (-41%) in OCP. Moreover, histological examination of the placentas suggested a reduction in the amount of functional trophoblast in the OCP group. This was consistent with a lower antipyrine diffusion across the placenta in these animals. In sum, our results indicate that maternal cholestasis affects the ability of the placenta to efficiently carry out bile acid transfer from fetal to maternal blood. Changes in both the structure and the functionality of the chorionic tissue may account for this impairment.
Assuntos
Ácidos e Sais Biliares/metabolismo , Colestase Extra-Hepática/metabolismo , Fígado/metabolismo , Troca Materno-Fetal , Placenta/metabolismo , Complicações na Gravidez , Animais , Membrana Celular/metabolismo , Feminino , Ácido Glicocólico/metabolismo , Cinética , Gravidez , Ratos , Ratos WistarRESUMO
The determination of tissue resistances between electrical heart activity and the surface distal electrodes in order to obtain one point with nonexistent potential, has been sought by means of the introduction of one external resistance previously fixed, and connected to an ECG transducer. The potential changes originated will be directly proportional to the value of the added resistance; some simultaneous equations have been established to obtain the resistance values from the heart to the distal electrodes.