A fluorescence LIDAR sensor for hyper-spectral time-resolved remote sensing and mapping.

In this work we present a LIDAR sensor devised for the acquisition of time resolved laser induced fluorescence spectra. The gating time for the acquisition of the fluorescence spectra can be sequentially delayed in order to achieve fluorescence data that are resolved both in the spectral and temporal domains. The sensor can provide sub-nanometric spectral resolution and nanosecond time resolution. The sensor has also imaging capabilities by means of a computer-controlled motorized steering mirror featuring a biaxial angular scanning with 200 µradiant angular resolution. The measurement can be repeated for each point of a geometric grid in order to collect a hyper-spectral time-resolved map of an extended target.

Effects of the excitation density on the laser output of two differently doped Yb:YAG ceramics.

We report the behavior of two Yb(3+) doped ceramics (i.e. 10% at. and 20% at.) under quasi-continuous wave laser pumping. Two different behaviors are found depending on the density of Yb(3+) in the excited level. Experimental results show that at low population inversion density, the maximum output power and the efficiency are almost independent on the doping concentration. In particular, an output power as high as 8.9 W with a corresponding slope efficiency of 52% with respect to the injected pump power was reached with the 20% at. sample. Conversely, at high population inversion densities, the 20% doped sample shows a sudden decrease of the laser output for increasing pump power, due to the onset of a nonlinear loss mechanism. Finally, we report a comparison of the experimental results with numerical simulations for the evaluation of the inversion density and of the temperature distribution.

Tunability enhancement of Yb:YLF based laser.

We present a comprehensive characterization of a laser, based on a high-quality heavily doped Yb:YLF crystal. The analysis includes the comparison of the laser efficiency in respect of the absorbed pump for both pi and sigma-polarization. In particular, for the tunable laser, we report an enhancement of the tuning range obtained by adapting the output coupler transmission in respect of the lasing wavelength. The experimental results obtained for various output coupling have also been compared with a numerical model in order to give information for a further enlargement of the tuning range.

Direct comparison of Yb3+:CaF2 and heavily doped Yb3+:YLF as laser media at room temperature.

We report an extensive comparison of the laser performances of diode-pumped Yb(3+):YLF (30% at.) and Yb(3+):CaF(2) (5% at.) crystals, lasing at room-temperature and operating in two different operation mode, i.e. Continuous Wave (CW) and quasi-CW. An in-depth investigation of the crystals behavior by changing the pump power, clearly shows the crystal absorption depends on the lasing conditions. Therefore, we report an unambiguous definition of the slope efficiency calculated taken into account the real measured crystal absorption under laser action. Finally, we present a study of problems related to thermally induced losses which are expected influencing the laser performance.

High-efficiency, high-power and low threshold Yb3+:YAG ceramic laser.

We present a high-power, high-efficiency and low threshold laser prototype based on doped ceramic Yb(3+):YAG. We achieved an output power of 9 W with a slope efficiency of 73% and a threshold of 1 W at 1030 nm in quasi-Continuous Wave (QCW). Moreover, we obtained an output power 7.7 W with a slope efficiency of 60% in Continuous Wave (CW). Finally, a characterization of a low losses tunable cavity for several laser wavelengths with an output power exceeding 5 W is reported.

High efficiency room temperature laser emission in heavily doped Yb:YLF.

We report the tunable, CW and quasi CW laser operation at room temperature of an highly doped (30% at.) Yb:YLF crystal longitudinally pumped by a fiber coupled laser diode array. The CW output power is 1.15 W vs. an absorbed pump power of 6 W, with a slope efficiency of 31%. In quasi-CW operation (20% duty factor @10 Hz) an output power of 4 W with an absorbed power of 9.5 W, and a slope efficiency of 62.8% were obtained. The tuning range spans from 1022 to 1075 nm. To our knowledge, these are among the best experimental results obtained at room temperature with Yb doped YLF.