Negative Thermal Expansion in the Polymorphic Modification of Double Sulfate ß-AEu(SO4)2 (A-Rb+, Cs+).

New polymorphic modifications of double sulfates ß-AEu(SO4)2 (A-Rb+, Cs+) were obtained by the hydrothermal method, the structure of which differs significantly from the monoclinic modifications obtained earlier by solid-state methods. According to single-crystal diffraction data, it was found that the compounds crystallize in the orthorhombic system, space group Pnna, with parameters ß-RbEu(SO4)2: a = 9.4667(4) Å, b = 13.0786(5) Å, c = 5.3760(2) Å, V = 665.61(5) Å3; ß-CsEu(SO4)2: a = 9.5278(5) Å, b = 13.8385(7) Å, c = 5.3783(3) Å, V = 709.13(7) Å3. The asymmetric part of the unit cell contains one-half Rb+/Cs+ ion, one-half Eu3+ ion, both in special sites, and one SO42- ion. Both compounds exhibit nonlinear negative thermal expansion. According to the X-ray structural analysis and theoretical calculations, the polarizing effect of the alkali metal ion has a decisive influence on the demonstration of this phenomenon. Experimental indirect band gaps of ß-Rb and ß-Cs are 4.05 and 4.11 eV, respectively, while the direct band gaps are 4.48 and 4.54 eV, respectively. The best agreement with theoretical calculations is obtained using the ABINIT package employing PAW pseudopotentials with hybrid PBE0 functional, while norm-conserving pseudopotentials used in the frame of CASTEP code and LCAO approach in the Crystal package gave worse agreement. The properties of alkali ions also significantly affect the luminescent properties of the compounds, which leads to a strong temperature dependence of the intensity of the 5D0 → 7F4 transition in ß-CsEu(SO4)2 in contrast to much weaker dependence of this kind in ß-RbEu(SO4)2.

A Challenge toward Novel Quaternary Sulfides SrLnCuS3 (Ln = La, Nd, Tm): Unraveling Synthetic Pathways, Structures and Properties.

We report on the novel heterometallic quaternary sulfides SrLnCuS3 (Ln = La, Nd, Tm), obtained as both single crystals and powdered samples. The structures of both the single crystal and powdered samples of SrLaCuS3 and SrNdCuS3 belong to the orthorhombic space group Pnma but are of different structural types, while both samples of SrTmCuS3 crystallize in the orthorhombic space group Cmcm with the structural type KZrCuS3. Three-dimensional crystal structures of SrLaCuS3 and SrNdCuS3 are formed from the (Sr/Ln)S7 capped trigonal prisms and CuS4 tetrahedra. In SrLaCuS3, alternating 2D layers are stacked, while the main backbone of the structure of SrNdCuS3 is a polymeric 3D framework [(Sr/Ln)S7]n, strengthened by 1D polymeric chains (CuS4)n with 1D channels, filled by the other Sr2+/Ln3+ cations, which, in turn, form 1D dimeric ribbons. A 3D crystal structure of SrTmCuS3 is constructed from the SrS6 trigonal prisms, TmS6 octahedra and CuS4 tetrahedra. The latter two polyhedra are packed together into 2D layers, which are separated by 1D chains (SrS6)n and 1D free channels. In both crystal structures of SrLaCuS3 obtained in this work, the crystallographic positions of strontium and lanthanum were partially mixed, while only in the structure of SrNdCuS3, solved from the powder X-ray diffraction data, were the crystallographic positions of strontium and neodymium partially mixed. Band gaps of SrLnCuS3 (Ln = La, Nd, Tm) were found to be 1.86, 1.94 and 2.57 eV, respectively. Both SrNdCuS3 and SrTmCuS3 were found to be paramagnetic at 20-300 K, with the experimental magnetic characteristics being in good agreement with the corresponding calculated parameters.

Exploration of the Crystal Structure and Thermal and Spectroscopic Properties of Monoclinic Praseodymium Sulfate Pr2(SO4)3.

Praseodymium sulfate was obtained by the precipitation method and the crystal structure was determined by Rietveld analysis. Pr2(SO4)3 is crystallized in the monoclinic structure, space group C2/c, with cell parameters a = 21.6052 (4), b = 6.7237 (1) and c = 6.9777 (1) Å, ß = 107.9148 (7)°, Z = 4, V = 964.48 (3) Å3 (T = 150 °C). The thermal expansion of Pr2(SO4)3 is strongly anisotropic. As was obtained by XRD measurements, all cell parameters are increased on heating. However, due to a strong increase of the monoclinic angle ß, there is a direction of negative thermal expansion. In the argon atmosphere, Pr2(SO4)3 is stable in the temperature range of T = 30-870 °C. The kinetics of the thermal decomposition process of praseodymium sulfate octahydrate Pr2(SO4)3·8H2O was studied as well. The vibrational properties of Pr2(SO4)3 were examined by Raman and Fourier-transform infrared absorption spectroscopy methods. The band gap structure of Pr2(SO4)3 was evaluated by ab initio calculations, and it was found that the valence band top is dominated by the p electrons of oxygen ions, while the conduction band bottom is formed by the d electrons of Pr3+ ions. The exact position of ZPL is determined via PL and PLE spectra at 77 K to be at 481 nm, and that enabled a correct assignment of luminescent bands. The maximum luminescent band in Pr2(SO4)3 belongs to the 3P0 → 3F2 transition at 640 nm.

Quaternary Selenides EuLnCuSe3: Synthesis, Structures, Properties and In Silico Studies.

In this work, we report on the synthesis, in-depth crystal structure studies as well as optical and magnetic properties of newly synthesized heterometallic quaternary selenides of the Eu+2Ln+3Cu+1Se3 composition. Crystal structures of the obtained compounds were refined by the derivative difference minimization (DDM) method from the powder X-ray diffraction data. The structures are found to belong to orthorhombic space groups Pnma (structure type Ba2MnS3 for EuLaCuSe3 and structure type Eu2CuS3 for EuLnCuSe3, where Ln = Sm, Gd, Tb, Dy, Ho and Y) and Cmcm (structure type KZrCuS3 for EuLnCuSe3, where Ln = Tm, Yb and Lu). Space groups Pnma and Cmcm were delimited based on the tolerance factor t', and vibrational spectroscopy additionally confirmed the formation of three structural types. With a decrease in the ionic radius of Ln3+ in the reported structures, the distortion of the (LnCuSe3) layers decreases, and a gradual formation of the more symmetric structure occurs in the sequence Ba2MnS3 → Eu2CuS3 → KZrCuS3. According to magnetic studies, compounds EuLnCuSe3 (Ln = Tb, Dy, Ho and Tm) each exhibit ferrimagnetic properties with transition temperatures ranging from 4.7 to 6.3 K. A negative magnetization effect is observed for compound EuHoCuSe3 at temperatures below 4.8 K. The magnetic properties of the discussed selenides and isostructural sulfides were compared. The direct optical band gaps for EuLnCuSe3, subtracted from the corresponding diffuse reflectance spectra, were found to be 1.87-2.09 eV. Deviation between experimental and calculated band gaps is ascribed to lower d states of Eu2+ in the crystal field of EuLnCuSe3, while anomalous narrowing of the band gap of EuYbCuSe3 is explained by the low-lying charge-transfer state. Ab initio calculations of the crystal structures, elastic properties and phonon spectra of the reported compounds were performed.

Structure, Thermal Stability, and Spectroscopic Properties of Triclinic Double Sulfate AgEu(SO4)2 with Isolated SO4 Groups.

Silver-europium double sulfate AgEu(SO4)2 was obtained by solid-phase reaction between Ag2SO4 and Eu2(SO4)3. The crystal structure of AgEu(SO4)2 was determined by Monte Carlo method with simulated annealing, and after that, it was refined by the Rietveld method from X-ray powder diffraction data. The compound crystallizes in the triclinic symmetry, space group P1̅ ( a = 0.632929(4), b = 0.690705(4), c = 0.705467(4) nm, α = 98.9614(4), ß = 84.5501(4), γ = 88.8201(4)°, V = 0.303069(3) nm3). Two types of sulfate tetrahedra were found in the structure, which significantly affects the spectroscopic properties in the IR-range. In the temperature range of 143-703 K, the average linear thermal expansion coefficients of cell parameters a, b, and c are very similar, (1.11-1.67) × 10-5 K-1 in magnitude, and therefore, AgEu(SO4)2 expands almost isotropically. Upon heating in argon flow, AgEu(SO4)2 is stable up to 1053 K. The luminescence spectra in the region of ultranarrow 5D0-7F0 transition contain a single narrow and symmetric line at 579.5 nm that is evidence of good crystalline quality of AgEu(SO4)2 and uniform local environment of Eu3+ ions in the structure. Distribution of luminescence bands is determined by the environment of Eu3+ ions in the structure. Influence of Ag+ ions on the electron density distribution at Eu sites is detected.

Aptamer-Targeted Plasmonic Photothermal Therapy of Cancer.

Novel nanoscale bioconjugates combining unique plasmonic photothermal properties of gold nanoparticles (AuNPs) with targeted delivery using cell-specific DNA aptamers have a tremendous potential for medical diagnostics and therapy of many cell-based diseases. In this study, we demonstrate the high anti-cancer activity of aptamer-conjugated, 37-nm spherical gold nanoparticles toward Ehrlich carcinoma in tumor-bearing mice after photothermal treatment. The synthetic anti-tumor aptamers bring the nanoparticles precisely to the desired cells and selectively eliminate cancer cells after the subsequent laser treatment. To prove tumor eradication, we used positron emission tomography (PET) utilizing radioactive glucose and computer tomography, followed by histological analysis of cancer tissue. Three injections of aptamer-conjugated AuNPs and 5 min of laser irradiations are enough to make the tumor undetectable by PET. Histological analysis proves PET results and shows lower damage of healthy tissue in addition to a higher treatment efficiency and selectivity of the gold nanoparticles functionalized with aptamers in comparison to control experiments using free unconjugated nanoparticles.

Comparative Analysis of Methods for Enhancement of the Photostability of CdTe@TGA QD Colloid Solutions.

The employment of colloid quantum dots in a number of applications is limited by their instability under light irradiation. Additional methods of photostability enhancement of UV+visible-irradiated TGA-stabilized CdTe quantum dots are investigated. Photostability enhancement was observed via either addition of sodium sulphite in the role of chemical oxygen absorber or addition of 1% gelatin, or, finally, by additional stabilization by bovine serum albumine (BSA). The latter method is the most promising, since it not only enhances the quantum dots' photostability but also makes them more biocompatible and extends the possibilities of their biological applications.

Triple molybdate scheelite-type upconversion phosphor NaCaLa(MoO4)3:Er3+/Yb3+: structural and spectroscopic properties.

Triple molybdate NaCaLa(1-x-y)(MoO4)3:xEr3+,yYb3+ (x = y = 0, x = 0.05 and y = 0.45, x = 0.1 and y = 0.2, x = 0.2 and y = 0) phosphors were successfully synthesized for the first time by the microwave sol-gel method. Well-crystallized particles formed after heat treatment at 900 °C for 16 h showed a fine and homogeneous morphology with particle sizes of 2-3 µm. The structures were refined by the Rietveld method in the space group I41/a. The optical properties were examined comparatively using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the NaCaLa0.7(MoO4)3:0.1Er3+,0.2Yb3+ and NaCaLa0.5(MoO4)3:0.05Er3+,0.45Yb3+ particles exhibited a strong 525 nm emission band, a weaker 550 nm emission band in the green region, and three weak 655 nm, 490 nm and 410 nm emission bands in the red, blue and violet regions. The pump power dependence and Commission Internationale de L'Eclairage chromaticity of the upconversion emission intensity were evaluated in detail.

Laser-induced wavelength-controlled self-assembly of colloidal quasi-resonant quantum dots.

Self-assembly of colloidal semiconductor quantum dots controlled solely by laser-induced interaction is demonstrated for the first time. Pairs of CdTe nanoparticles are formed under irradiation with nanosecond pulses at wavelengths 555 or 560 nm. Formation of pairs is justified by corresponding changes of absorption spectra. Conditions of the experiment are in excellent agreement with those predicted by the theory of laser-induced dipole-dipole interaction of QDs. The fraction of QDs assembled into pairs is up to 47%.

Generation of coherent radiation in the vacuum ultraviolet using randomly quasi-phase-matched strontium tetraborate.

Tunable coherent radiation is generated in the vacuum ultraviolet down to 121 nm using random quasi-phase matching in strontium tetraborate, the shortest wavelength ever produced with a second-order nonlinear optical process in a solid-state material. Relevant properties of this radiation, the nonlinear process, and the nonlinear crystal are investigated.

Spectral fringes in non-phase-matched SHG and refinement of dispersion relations in the VUV.

We consider second harmonic generation (SHG) of ultrashort pulses in the case of strong phase- and group-velocity mismatch. Spectral fringes appear in the second harmonic related to two delayed replicas of the fundamental pulse in the time domain. The fringe separation can be used to evaluate the group-velocity and refractive index of nonlinear crystals at extreme wavelengths. Experimental results with femtosecond pulses in SrB(4)O(7) (SBO) are used to refine the Sellmeier equation describing the n(c) refractive index down to 160 nm, essential for the use of this unique nonlinear crystal for random quasi-phase-matching in the VUV.