Coupling Charge Reduction Mass Spectrometry to Liquid Chromatography for Complex Mixture Analysis.

Electrospray ionization (ESI) of solution mixtures often generates complex mass spectra, even following liquid chromatography (LC), due to analyte multiple charging. Multiple charge state distributions can lead to isobaric interferences, mass spectral congestion, and ambiguous ion identification. As a consequence, data interpretation increases in complexity. Several charge reduction mass spectrometry (MS) approaches have been previously developed to reduce the average charge state of gaseous ions; however, all of these techniques have been restricted to direct infusion MS. In this study, synthetic polyols and surfactants separated by liquid chromatography and ionized by positive mode ESI have been subjected to polonium-210 α-particle radiation to reduce the average charge state to singly charged cations prior to mass analysis. LC/MS analysis of 5000 molecular weight poly(ethylene glycol) (PEG5000) generated an average charge state of 5.88+; whereupon, liquid chromatography/electrospray ionization/charge reduction/mass spectrometry (LC/CR/MS) analysis of PEG 5000 generated an average charge state of 1.00+. The PEG5000 results demonstrated a decrease in spectral complexity and enabled facile interpretation. Other complex solution mixtures representing specific MS challenges (i.e., competitive ionization and isobaric ion overlap) were explored and analyzed with LC/CR/MS to demonstrate the benefits of coupling LC to CR/MS. For example, polyol information related to initiator, identity/relative amount of monomer, and estimated molecular weight was characterized in random and triblock ethylene oxide/propylene oxide polyols using LC/CR/MS. LC/CR/MS is a new analytical technique for the analysis of complex mixtures.

Ultra-high performance size-exclusion chromatography of synthetic polymers: demonstration of capability.

Ultra-high performance size-exclusion chromatography (UHP SEC) is a newly developed disruptive technology that allows the high-resolution separation of synthetic polymers in as little as 2 min. The capability of UHP SEC for the characterization of synthetic polymers in organic solvents has been demonstrated. Using the Waters ACQUITY UPLC® H-Class system and ethylene-bridged hybrid size-exclusion chromatography (SEC) columns packed with 1.7 to 2.5-µm particles with pore sizes ranging from 45 to 900 Å, size-based separations of polystyrene and poly(methyl methacrylate) standards in tetrahydrofuran and poly(ethylene oxide) standards in 20 mM ammonium acetate in methanol are achieved within 2-4 min. The speed of analysis is about ten times faster than conventional SEC separations, and greater resolution is achieved. Average molecular weights of selected commercial polymers have been determined using ultra-high performance and conventional SEC. Average M data of analyzed samples are in good agreement using the two approaches. An inherent limitation of SEC in UHP mode is the characterization of very high M polymers (above ca. 2 million Da) due to the deformation and/or mechanical shearing of large molecules at high flow rates.

Aerosol size standards in the nanometer size range II. Narrow size distributions of polystyrene 3-11 nm in diameter.

A technique for generating charged aerosols of polystyrene (pSty) with narrow size distributions has been developed. It is based on electrospraying commercial narrow mass standards of pSty dissolved in l-methyl-2-pyrrolidone (NMP) seeded with the newly synthesized salt dimethyl ammonium formate. This salt imparts a much larger electrical conductivity than previously known NMP electrolytes, leading to higher quality sprays with greatly reduced attachment of impurities. Controlling the solute concentration enables forming polystyrene particles containing from one up to more than ten single polystyrene molecules, whereby 4 mass standards with molecular weights from 9200 up to 96,000 g/mol yield particles covering densely the diameter range from 3 to 11 nm. Combined mobility and mass measurement with a differential mobility analyzer and a mass spectrometer in tandem are carried out with a pSty sample 9200 amu in molecular weight. They fix directly the mass versus mobility relation near 9200 amu, and indirectly for the other standards and their clusters. The apparent particle density resulting from mobility versus mass data agrees with the bulk density of the polymer, indicating that the particles are dense and spherical. Although these standards have been studied only in gaseous suspension, their injection in liquids such as water where pSty is insoluble should keep them spherical.

Mass distribution measurement of water-insoluble polymers by charge-reduced electrospray mobility analysis.

1-Methyl-2-pyrrolidone (NMP) seeded with 5% trifluoroacetic acid is identified as a singular buffer, polar enough to produce fine electrospray drops, yet having excellent solubility for many industrial polymers such as polystyrene (PSR) and poly(methyl methacrylate) (PMMA). Four PSR mass standards (M = 9.2, 34.5, 68, and 170 kDa) with narrow mass distributions are electrosprayed from their solutions in this buffer. The high charge on the resulting ions is reduced to unity with a radioactive source, whereby their electrical mobility distributions, determined by a differential mobility analyzer, yield unambiguously their size distribution. Each standard produces (at high solution concentration) several mobility peaks associated with the formation of particles containing from one to six polymer molecules, used to establish a relation Z(M) between electrical mobility Z and polymer mass. Within the indeterminacy given by inaccuracies in the nominal masses of the standards, this relation indicates that the polymers form spherical balls with a density close to the bulk density of polystyrene, as seen previously with poly(ethylene glycol) chains. Good mobility spectra from the same buffer are also obtained for PMMA (M = 49 kDa). Because NMP is less conductive and contains more involatile impurities than common aqueous buffers, the electrospray ions formed tend to carry a small contaminant crust, which distorts the inferred mass distribution unless a high spray quality is achieved.