Cobalt-catalyzed synthesis of amides from alkenes and amines promoted by light.

Catalytic methods to couple alkene and amine feedstocks are valuable in synthetic chemistry. The direct carbonylative coupling of alkenes and amines holds promise as a perfectly atom-economical approach to amide synthesis, but general methods remain underdeveloped. Herein, we report an alkene hydroaminocarbonylation catalyzed by unmodified, inexpensive cobalt carbonyl under mild conditions and low pressure promoted by light. Silane addition after the reaction enables sequential cobalt-catalyzed amide reduction, constituting a formal alkene hydroaminomethylation. These methods exhibit exceptional scope across both alkene and amine components with high chemo- and regioselectivity and proceed efficiently even in the absence of solvent. The formation of a hydridocobalt through photodissociation of a carbonyl ligand is proposed to enable catalytic activity under mild conditions, which addresses a long-standing challenge in catalysis.

C-H Functionalization of Polyolefins to Access Reprocessable Polyolefin Thermosets.

Upcycling plastic waste into reprocessable materials with performance-advantaged properties would contribute to the development of a circular plastics economy. Here, we modify branched polyolefins and postconsumer polyethylene through a versatile C-H functionalization approach using thiosulfonates as a privileged radical group transfer functionality. Cross-linking the functionalized polyolefins with polytopic amines provided dynamically cross-linked polyolefin networks enabled by associative bond exchange of diketoenamine functionality. A combination of resonant soft X-ray scattering and grazing incidence X-ray scattering revealed hierarchical phase morphology in which diketoenamine-rich microdomains phase-separate within amorphous regions between polyolefin crystallites. The combination of dynamic covalent cross-links and microphase separation results in useful and improved mechanical properties, including a ∼4.5-fold increase in toughness, a reduction in creep deformation at temperatures relevant to use, and high-temperature structural stability compared to the parent polyolefin. The dynamic nature of diketoenamine cross-links provides stress relaxation at elevated temperatures, which enabled iterative reprocessing of the dynamic covalent polymer network with little cycle-to-cycle property fade. The ability to convert polyolefin waste into a reprocessable thermoformable material with attractive thermomechanical properties provides additional optionality for upcycling to enable future circularity.

General Synthesis of N-Alkylindoles from N,N-Dialkylanilines via [4 + 1] Annulative Double C-H Functionalization.

Strategies enabling the construction of indoles and novel polycyclic heterocycles from simple building blocks streamline syntheses in synthetic and medicinal chemistry. Herein, we report a C-H functionalization approach to N-alkylindoles proceeding via a double, site-selective C(sp3)-H/C(sp2)-H [4 + 1] annulation of readily accessed N,N-dialkylanilines. This protocol features a site-selective hydrogen atom transfer by a tuned N-tBu amidyl radical and addition of a sulfonyl diazo coupling partner, which promotes highly site-selective homolytic aromatic substitution of the (hetero)aromatic core. Mild decarboxylation of the annulation product enables the overall introduction of a carbyne equivalent into the N,N-dialkylaniline scaffold. Furthermore, the site-selectivity and mild conditions of the indolization facilitate direct access to N-alkyl indole scaffolds in late-stage functionalization (LSF) settings.

Heteroarylation of unactivated C-H bonds suitable for late-stage functionalization.

The late-stage introduction of diverse heterocycles onto complex small molecules enables efficient access to new medicinally relevant compounds. An attractive approach to such a transformation would utilize the ubiquitous aliphatic C-H bonds of a complex substrate. Herein, we report a system that enables direct C-H heteroarylation using a stable, commercially available O-alkenylhydroxamate with heterocyclic sulfone partners. The C-H heteroarylation proceeds efficiently with a range of aliphatic substrates and common heterocycles, and is a rare example of heteroarylation of strong C-H bonds. Importantly, the present approach is amenable to late-stage functionalization as the substrate is the limiting reagent in all cases.

Cobalt-Catalyzed Deaminative Amino- and Alkoxycarbonylation of Aryl Trialkylammonium Salts Promoted by Visible Light.

Catalytic carbonylations of aryl electrophiles via C(sp2 )-N cleavage remains a significant challenge. Herein, we demonstrate an aminocarbonylation of aniline-derived trialkylammonium salts promoted by visible light with a simple cobalt catalyst. The reaction proceeds under mild conditions suitable for late-stage functionalization and is amenable to telescoped carbonylations directly from anilines. A range of alkylamines are successful partners, and alkoxycarbonylation is also demonstrated. Mechanistic studies and DFT calculations support a novel mechanism for catalytic carbonylations of aryl electrophiles involving a key visible light-induced carbonyl photodissociation.

Diversification of aliphatic C-H bonds in small molecules and polyolefins through radical chain transfer.

The ability to selectively introduce diverse functionality onto hydrocarbons is of substantial value in the synthesis of both small molecules and polymers. Herein, we report an approach to aliphatic carbon-hydrogen bond diversification using radical chain transfer featuring an easily prepared O-alkenylhydroxamate reagent, which upon mild heating facilitates a range of challenging or previously undeveloped aliphatic carbon-hydrogen bond functionalizations of small molecules and polyolefins. This broad reaction platform enabled the functionalization of postconsumer polyolefins in infrastructure used to process plastic waste. Furthermore, the chemoselective placement of ionic functionality onto a branched polyolefin using carbon-hydrogen bond functionalization upcycled the material from a thermoplastic into a tough elastomer with the tensile properties of high-value polyolefin ionomers.

Stereospecific Nickel-Catalyzed Reductive Cross-Coupling of Alkyl Tosylate and Allyl Alcohol Electrophiles.

The stereospecific cross-coupling of easily accessed electrophiles holds significant promise in the construction of C-C bonds. Herein, we report a nickel-catalyzed reductive coupling of allyl alcohols with chiral, nonracemic alkyl tosylates. This cross-coupling delivers valuable allylation products with high levels of stereospecificity across a range of substrates. The catalytic system consists of a simple nickel salt in conjunction with a commercially available reductant and importantly represents a rare example of a cross-coupling involving the C-O bonds of two electrophiles.

Cobalt-catalyzed aminocarbonylation of (hetero)aryl halides promoted by visible light.

The catalytic aminocarbonylation of (hetero)aryl halides is widely applied in the synthesis of amides but relies heavily on the use of precious metal catalysis. Herein, we report an aminocarbonylation of (hetero)aryl halides using a simple cobalt catalyst under visible light irradiation. The reaction extends to the use of (hetero)aryl chlorides and is successful with a broad range of amine nucleophiles. Mechanistic investigations are consistent with a reaction proceeding via intermolecular charge transfer involving a donor-acceptor complex of the substrate and cobaltate catalyst.

Direct Decarboxylative Functionalization of Carboxylic Acids via O-H Hydrogen Atom Transfer.

Decarboxylative functionalization via hydrogen atom transfer offers an attractive alternative to standard redox approaches to this important class of transformations. Herein, we report a direct decarboxylative functionalization of aliphatic carboxylic acids using N-xanthylamides. The unique reactivity of amidyl radicals in hydrogen atom transfer enables decarboxylative xanthylation under redox-neutral conditions. This platform provides expedient access to a range of derivatives through subsequent elaboration of the xanthate group.

Manganese-Catalyzed Stereospecific Hydroxymethylation of Alkyl Tosylates.

The development of a stereospecific hydroxymethylation of alkyl tosylates using an inexpensive, first-row catalyst is described. The transformation proceeds under mild conditions with low pressure to deliver homologated alcohols as products. Chiral, nonracemic ß-branched primary alcohols are obtained with high enantiospecificity from easily accessed secondary alkyl substrates. Simple modification of the reaction system also permits access to α-d2 alcohols. These studies use anionic metal carbonyl catalysis to access a synthetic equivalent of the challenging hydroxymethyl anion from carbon monoxide.

Chemo- and Regioselective Functionalization of Isotactic Polypropylene: A Mechanistic and Structure-Property Study.

Polyolefins represent a high-volume class of polymers prized for their attractive thermomechanical properties, but the lack of chemical functionality on polyolefins makes them inadequate for many high-performance engineering applications. We report a metal-free postpolymerization modification approach to impart functionality onto branched polyolefins without the deleterious chain-coupling or chain-scission side reactions inherent to previous methods. The identification of conditions for thermally initiated polyolefin C-H functionalization combined with the development of new reagents enabled the addition of xanthates, trithiocarbonates, and dithiocarbamates to a variety of commercially available branched polyolefins. Systematic experimental and kinetic studies led to a mechanistic hypothesis that facilitated the rational design of reagents and reaction conditions for the thermally initiated C-H xanthylation of isotactic polypropylene (iPP) within a twin-screw extruder. A structure-property study showed that the functionalized iPP adheres to polar surfaces twice as strongly as commercial iPP while demonstrating similar tensile properties. The fundamental understanding of the elementary steps in amidyl radical-mediated polyolefin functionalization provided herein reveals key structure-reactivity relationships for the design of improved reagents, while the demonstration of chemoselective and scalable iPP functionalization to realize a material with improved adhesion properties indicates the translational potential of this method.

Identifying Amidyl Radicals for Intermolecular C-H Functionalizations.

Recent studies have demonstrated the capabilities of amidyl radicals to facilitate a range of intermolecular functionalizations of unactivated, aliphatic C-H bonds. Relatively little information is known regarding the important structural and electronic features of amidyl and related radicals that impart efficient reactivity. Herein, we evaluate a diverse range of nitrogen-centered radicals in unactivated, aliphatic C-H chlorinations. These studies establish the salient features of nitrogen-centered radicals critical to these reactions in order to expedite the future development of new site-selective, intermolecular C-H functionalizations.

Nickel-catalyzed, ring-forming aromatic C-H alkylations with unactivated alkyl halides.

The development of a nickel-catalyzed C-H alkylation of aromatic substrates with unactivated alkyl halides is described. This carbocyclization facilitates the synthesis of diverse fused ring systems from simple aromatic substrates and is an attractive alternative to traditional polar or radical-mediated ring formations. The present system uses unactivated primary and secondary alkyl bromides and chlorides, while avoiding the use of precious palladium catalysts and more reactive alkyl halides commonly used in related C-H alkylations.

C-H Alkylation via Multisite-Proton-Coupled Electron Transfer of an Aliphatic C-H Bond.

The direct, site-selective alkylation of unactivated C(sp3)-H bonds in organic substrates is a long-standing goal in synthetic chemistry. General approaches to the activation of strong C-H bonds include radical-mediated processes involving highly reactive intermediates, such as heteroatom-centered radicals. Herein, we describe a catalytic, intermolecular C-H alkylation that circumvents such reactive species via a new elementary step for C-H cleavage involving multisite-proton-coupled electron transfer (multisite-PCET). Mechanistic studies indicate that the reaction is catalyzed by a noncovalent complex formed between an iridium(III) photocatalyst and a monobasic phosphate base. The C-H alkylation proceeds efficiently using diverse hydrocarbons and complex molecules as the limiting reagent and represents a new approach to the catalytic functionalization of unactivated C(sp3)-H bonds.

Cobalt-Catalyzed Aminocarbonylation of Alkyl Tosylates: Stereospecific Synthesis of Amides.

Metal-catalyzed aminocarbonylation is a standard approach for installing amide functionality in chemical synthesis. Despite broad application of this transformation using aryl or vinyl electrophiles, there are few examples involving unactivated aliphatic substrates. Furthermore, there are no stereocontrolled aminocarbonylations of alkyl electrophiles known. Herein, we report a stereospecific aminocarbonylation of unactivated alkyl tosylates for the synthesis of enantioenriched amides. This cobalt-catalyzed transformation uses a remarkably broad range of amines and proceeds with excellent stereospecificity and chemoselectivity.

Transition-Metal (Pd, Ni, Mn)-Catalyzed C-C Bond Constructions Involving Unactivated Alkyl Halides and Fundamental Synthetic Building Blocks.

The catalytic construction of C-C bonds between organohalide or pseudohalide electrophiles and fundamental building blocks such as alkenes, arenes, or CO are widely utilized metal-catalyzed processes. The use of simple, widely available unactivated alkyl halides in these catalytic transformations has significantly lagged behind the use of aryl or vinyl electrophiles. This difference is primarily due to the relative difficulty of activating alkyl halides with transition metals under mild conditions. This Account details our group's work toward developing a general catalytic manifold for the construction of C-C bonds using unactivated alkyl halides and a range of simple chemical feedstocks. Critical to the strategy was the implementation of new modes of hybrid organometallic-radical reactivity in catalysis. Generation of carbon-centered radicals from alkyl halides using transition metals offers a solution to challenges associated with the application of alkyl electrophiles in classical two-electron reaction modes. A major focus of this work was the development of general palladium-catalyzed carbocyclizations and intermolecular cross-couplings of unactivated alkyl halides (alkyl-Mizoroki-Heck-type reactions). Initial studies centered on the use of alkyl iodides in these processes, but subsequent studies determined that the use of an electron-rich ferrocenyl bisphosphine (dtbpf) enables the palladium-catalyzed carbocyclizations of unactivated alkyl bromides. Mechanistic studies of these reactions revealed interesting details regarding a difference in mechanism between reactions of alkyl iodides and alkyl bromides in carbocyclizations. These studies were consistent with alkyl bromides reacting via an autotandem catalytic process involving atom-transfer radical cyclization (ATRC) followed by catalytic dehydrohalogenation. Reactions of alkyl iodides, on the other hand, involved metal-initiated radical chain pathways. Recent studies have expanded the scope of alkyl-Mizoroki-Heck-type reactions to the use of a first-row transition metal. Inexpensive nickel precatalysts, in combination with the bisphosphine ligand Xantphos, efficiently activate alkyl bromides for both intra- and intermolecular C-C bond-forming reactions. The reaction scope is similar to the palladium-catalyzed system, but in addition, alkene regioisomeric ratios are dramatically improved over those in reactions with palladium, solving one of the drawbacks of our previous work. Initial mechanistic studies were consistent with a hybrid organometallic-radical mechanism for the nickel-catalyzed reactions. The novel reactivity of the palladium catalysts in the alkyl-Mizoroki-Heck-type reactions have also paved the way for the development of other C-C bond-forming processes of unactivated alkyl halides, including aromatic C-H alkylations as well as low-pressure alkoxycarbonylations. Related hybrid organometallic-radical reactivity of manganese has led to an alkene dicarbofunctionalization using alkyl iodides.

Nickel-Catalyzed Mizoroki-Heck-Type Reactions of Unactivated Alkyl Bromides.

The development of a general, nickel-catalyzed alkyl-Mizoroki-Heck reaction of unactivated alkyl bromides is described. The mild reaction proceeds efficiently using a wide range of primary and secondary alkyl bromides, and examples of intermolecular cross-couplings are provided. Reaction alkene regioselectivity is significantly enhanced over prior carbocyclizations using palladium catalysis. Mechanistic investigations are consistent with a direct carbocyclization in contrast to the auto-tandem atom-transfer cyclization and halide elimination previously observed with palladium catalysis.

A General Approach to Site-Specific, Intramolecular C-H Functionalization Using Dithiocarbamates.

Intramolecular hydrogen atom transfer is an established approach for the site-specific functionalization of unactivated, aliphatic C-H bonds. Transformations using this strategy typically require unstable intermediates formed using strong oxidants and have mainly targeted C-H halogenations or intramolecular aminations. Herein, we report a site-specific C-H functionalization that significantly increases the synthetic scope and convergency of reactions proceeding via intramolecular hydrogen atom transfer. Stable, isolable N-dithiocarbamates are used as precursors to amidyl radicals formed via either light or radical initiation to efficiently deliver highly versatile alkyl dithiocarbamates across a wide range of complex structures.

Reagent-dictated site selectivity in intermolecular aliphatic C-H functionalizations using nitrogen-centered radicals.

The site selectivities of intermolecular, aliphatic C-H bond functionalizations are central to the value of these transformations. While the scope of these reactions continues to expand, the site selectivities remain largely dictated by the inherent reactivity of the substrate C-H bonds. Herein, we introduce reagent-dictated site selectivity to intermolecular aliphatic C-H functionalizations using nitrogen-centered amidyl radicals. Simple modifications of the amide lead to high levels of site selectivity in intermolecular C-H functionalizations across a range of simple and complex substrates. DFT calculations demonstrate that the steric demand of the reacting nitrogen-centered radical is heavily affected by the substitution pattern of the starting amide. Optimization of transition state structures consistently indicated higher reagent-dictated steric selectivities using more hindered amides, consistent with experimental results.

Regioselective C-H Xanthylation as a Platform for Polyolefin Functionalization.

Polyolefins that contain polar functional groups are important materials for next-generation lightweight engineering thermoplastics. Post-polymerization modification is an ideal method for the incorporation of polar groups into branched polyolefins; however, it typically results in chain scission events, which have deleterious effects on polymer properties. Herein, we report a metal-free method for radical-mediated C-H xanthylation that results in the regioselective functionalization of branched polyolefins without coincident polymer-chain scission. This method enables a tunable degree of polymer functionalization and capitalizes on the versatility of the xanthate functional group to unlock a wide variety of C-H transformations previously inaccessible on branched polyolefins.