Electrospun biodegradable poly(ε-caprolactone) membranes for annulus fibrosus repair: Long-term material stability and mechanical competence.

BACKGROUND: Electrospun (ES) poly(ɛ-caprolactone) (PCL) is widely used to provide critical mechanical support in tissue engineering and regenerative medicine applications. Therefore, there is a clear need for understanding the change in the mechanical response of the membranes as the material degrades in physiological conditions. STUDY DESIGN: ES membranes with fiber diameters from 1.6 to 6.7 µm were exposed to in vitro conditions at 37°C in Dulbecco's modified Eagle's medium (DMEM) or dry for up to 6 months. METHODS: During this period, the mechanical properties were assessed using cyclic mechanical loading, and material properties such as crystallinity and ester bond degradation were measured. RESULTS: No significant difference was found for any parameters between samples kept dry and in DMEM. The increase in crystallinity was linear with time, while the ester bond degradation showed an inverse logarithmic correlation with time. All samples showed an increase in modulus with exposure time for the first loading cycle. Modulus changes for the consecutive loading cycles showed a nonlinear relationship to the exposure time that depended on membrane type and maximum strain. In addition, the recovered elastic range showed an expected increase with the maximum strain reached. The mechanical response of ES membranes was compared to experimental tensile properties of the human annulus fibrosus tissue and an in silico model of the intervertebral disk. The modulus of the tested membranes was at the lower range of the values found in literature, while the elastically recoverable strain after preconditioning for all membrane types lies within the desired strain range for this application. CONCLUSION: The long-term assessment under application-specific conditions allowed to establish the mechanical competence of the electrospun PCL membranes. It can be concluded that with the use of appropriate fixation, the membranes can be used to create a seal on the damaged AF.

Mechanical and biological characterization of a composite annulus fibrosus repair strategy in an endplate delamination model.

This study compares the mechanical response of the commonly used annulus fibrosus (AF) puncture injury model of the intervertebral disc (IVD) and a newly proposed AF failure at the endplate junction (delamination) on ex vivo bovine IVDs. Biocompatibility and mechanics of a newly developed repair strategy comprising of electrospun polycaprolactone (PCL) scaffold and fibrin-genipin (FibGen) adhesive was tested on the delamination model. The study found no significant difference in the mechanical response to compressive loading between the two models. Primary goals of the repair strategy to create a tight seal on the damage area and restore mechanical properties, while showing minimal cytotoxicity, were broadly achieved. Postrepair, the IVDs showed a significant restoration of mechanical properties compared to the injured samples for the delamination model. The FibGen glue showed a limited toxicity in the AF and produced a resilient and mechanically stable seal on the damaged area.

Textured and hierarchically structured calcium phosphate ceramic blocks through hydrothermal treatment.

Synthetic calcium phosphate bone graft substitutes are widely recognized for their biocompatibility and resorption characteristics in the treatment of large bone defects. However, due to their inherent brittleness, applications in load-bearing situations always require reinforcement by additional metallic implants. Improved mechanical stability would eliminate the need for non-resorbable metallic implants. In this context a new approach to obtain calcium phosphate scaffolds with improved mechanical stability by texturing the material in specific crystal orientations was evaluated. Texture and reduction of crystal size was achieved by recrystallizing α-TCP blocks into calcium deficient hydroxyapatite (CDHA) under hydrothermal conditions. SEM and XRD analysis revealed the formation of fine CDHA needles (diameter ≈ 0.1-0.5 µm), aligned over several hundreds of micrometers. The obtained microstructures were remarkably similar to the microstructures of the prismatic layer of mollusk shells or enamel, also showing organization at 5 hierarchical structure levels. Brazilian disc tests were used to determine the diametral tensile strength, σdts, and the work-of-fracture, WOF, of the textured materials. Hydrothermal incubation significantly increased σdts and WOF of the ceramic blocks as compared to sintered blocks. These improvements were attributed to the fine and entangled crystal structure obtained after incubation, which reduces the size of strength-determining critical defects and also leads to tortuous crack propagation. Rupture surfaces revealed intergranular tortuous crack paths, which dissipate much more energy than transgranular cracks as observed in the sintered samples. Hence, the refined and textured microstructure achieved through the proposed processing route is an effective way to improve the strength and particularly the toughness of calcium phosphate-based ceramics.

Draft Genome Sequence of Bacillus pumilus 7P, Isolated from the Soil of the Tatarstan Republic, Russia.

Here, we present a draft genome sequence of Bacillus pumilus strain 7P. This strain was isolated from soil as an extracellular RNase-producing microorganism. The RNase of B. pumilus 7P is considered to be a potential antiviral and therapeutic antitumor agent, and it might be appropriate for agriculture and academic synthesis of oligoribonucleotides.

Cyclic nucleotide-gated ion channels in rod photoreceptors are protected from retinoid inhibition.

In vertebrate rods, photoisomerization of the 11-cis retinal chromophore of rhodopsin to the all-trans conformation initiates a biochemical cascade that closes cGMP-gated channels and hyperpolarizes the cell. All-trans retinal is reduced to retinol and then removed to the pigment epithelium. The pigment epithelium supplies fresh 11-cis retinal to regenerate rhodopsin. The recent discovery that tens of nanomolar retinal inhibits cloned cGMP-gated channels at low [cGMP] raised the question of whether retinoid traffic across the plasma membrane of the rod might participate in the signaling of light. Native channels in excised patches from rods were very sensitive to retinoid inhibition. Perfusion of intact rods with exogenous 9- or 11-cis retinal closed cGMP-gated channels but required higher than expected concentrations. Channels reopened after perfusing the rod with cellular retinoid binding protein II. PDE activity, flash response kinetics, and relative sensitivity were unchanged, ruling out pharmacological activation of the phototransduction cascade. Bleaching of rhodopsin to create all-trans retinal and retinol inside the rod did not produce any measurable channel inhibition. Exposure of a bleached rod to 9- or 11-cis retinal did not elicit channel inhibition during the period of rhodopsin regeneration. Microspectrophotometric measurements showed that exogenous 9- or 11-cis retinal rapidly cross the plasma membrane of bleached rods and regenerate their rhodopsin. Although dark-adapted rods could also take up large quantities of 9-cis retinal, which they converted to retinol, the time course was slow. Apparently cGMP-gated channels in intact rods are protected from the inhibitory effects of retinoids that cross the plasma membrane by a large-capacity buffer. Opsin, with its chromophore binding pocket occupied (rhodopsin) or vacant, may be an important component. Exceptionally high retinoid levels, e.g., associated with some retinal degenerations, could overcome the buffer, however, and impair sensitivity or delay the recovery after exposure to bright light.

Suicide inhibition of alpha-oxamine synthases: structures of the covalent adducts of 8-amino-7-oxononanoate synthase with trifluoroalanine.

The irreversible inhibition of 8-amino-7-oxononanoate synthase by trifluoroalanine involves decarboxylative defluorination of the inhibitor-PLP aldimine followed by attack of the conjugated imine by the amino group of the active site lysine to afford a covalently bound difluorinated intermediate which can subsequently undergo further HF losses and hydrolysis to afford a 2-(pyridoximine phosphate) acetoyl protein adduct.

Cloning, expression, purification, crystallization and preliminary X-ray characterization of the full-length single-stranded DNA-binding protein from the hyperthermophilic bacterium Aquifex aeolicus.

Single-stranded DNA-binding (SSB) proteins stabilize single-stranded DNA, which is exposed by separation of the duplex during DNA replication, recombination and repair. The SSB protein from the hyperthermophile Aquifex aeolicus has been overexpressed in Escherichia coli, purified and characterized and crystals of the full-length protein (147 amino acids; M(r) 17 131.20) have been grown by vapour diffusion from ammonium sulfate pH 7.5 in both the absence and presence of ssDNA [dT(pT)(68)]. All crystals diffract to around 2.9 A resolution and those without bound DNA (native) belong to space group P2(1), with two tetramers in the asymmetric unit and unit-cell parameters a = 80.97, b = 73.40, c = 109.76 A, beta = 95.11 degrees . Crystals containing DNA have unit-cell parameters a = 108.65, b = 108.51, c = 113.24 A and could belong to three closely related space groups (I222, I2(1)2(1)2(1) or I4(1)) with one tetramer in the asymmetric unit. Electrospray mass spectrometry of the crystals confirmed that the protein was intact. Molecular replacement with a truncated E. coli SSB structure has revealed the position of the molecules in the unit cell and refinement of both native and DNA-bound forms is under way.

Oxo-iron clusters in a bacterial iron-trafficking protein: new roles for a conserved motif.

We report a set of three 1.8-1.9 A resolution X-ray crystal structures of Neisseria gonorrhoeae Fbp (ferric-ion binding protein): (i) open-cleft apo-Fbp containing bound phosphate, (ii) open-cleft mono-Fe Fbp capped by nitrilotriacetate, and (iii) open-cleft trinuclear oxo-iron Fbp, the first structure of an iron-cluster adduct of a transferrin. The nine independent molecules in the unit cells provide 'snapshots' of the versatile dynamic structural roles of the conserved dityrosyl iron-binding motif (Tyr195-Tyr196) which control the capture and, possibly, processing of iron. These findings have implications for understanding bacterial iron acquisition and dissimilation, and organic/mineral interfaces.

5-Aminolevulinic acid synthase: mechanism, mutations and medicine.

5-Aminolevulinic acid synthase (ALAS), the first enzyme of the heme biosynthesis pathway, catalyses the pyridoxal 5'-phosphate-dependent condensation between glycine and succinyl-CoA to yield 5-aminolevulinic acid (5-amino-4-oxopentanoate). A three-dimensional structural model of Rhodobacter spheroides ALAS has been constructed and used to identify amino acid residues at the active site that are likely to be important for the recognition of glycine, the only amino acid substrate. Several residues have been investigated by site-directed mutagenesis and enzyme variants have been generated that are able to use alanine, serine or threonine. A three-dimensional structure model of 5-aminolevulinic acid synthase from human erythrocytes (ALAS 2) has also been constructed and used to map a range of naturally occurring human mutants that give rise to X-linked sideroblastic anemia. A number of these anemias respond favourably to vitamin B(6) (pyridoxine) therapy, whereas others are either partially responsive or completely refractory. Detailed investigations with selected human mutants have highlighted the importance of arginine-517 that is implicated in glycine carboxyl group binding.

A novel protein-mineral interface.

Transferrins transport Fe3+ and other metal ions in mononuclear-binding sites. We present the first evidence that a member of the transferrin superfamily is able to recognize multi-nuclear oxo-metal clusters, small mineral fragments that are the most abundant forms of many metals in the environment. We show that the ferric ion-binding protein from Neisseria gonorrhoeae (nFbp) readily binds clusters of Fe3+, Ti4+, Zr4+ or Hf4+ in solution. The 1.7 A resolution crystal structure of Hf-nFbp reveals three distinct types of clusters in an open, positively charged cleft between two hinged protein domains. A di-tyrosyl cluster nucleation motif (Tyr195-Tyr196) is situated at the bottom of this cleft and binds either a trinuclear oxo-Hf cluster, which is capped by phosphate, or a pentanuclear cluster, which in turn can be capped with phosphate. This first high-resolution structure of a protein-mineral interface suggests a novel metal-uptake mechanism and provides a model for protein-mediated mineralization/dissimilation, which plays a critical role in geochemical processes.