Condensed Supramolecular Helices: The Twisted Sisters of DNA.

Condensation of DNA helices into hexagonally packed bundles and toroids represents an intriguing example of functional organization of biological macromolecules at the nanoscale. The condensation models are based on the unique polyelectrolyte features of DNA, however here we could reproduce a DNA-like condensation with supramolecular helices of small chiral molecules, thereby demonstrating that it is a more general phenomenon. We show that the bile salt sodium deoxycholate can form supramolecular helices upon interaction with oppositely charged polyelectrolytes of homopolymer or block copolymers. At higher order, a controlled hexagonal packing of the helices into DNA-like bundles and toroids could be accomplished. The results disclose unknown similarities between covalent and supramolecular non-covalent helical polyelectrolytes, which inspire visionary ideas of constructing supramolecular versions of biological macromolecules. As drug nanocarriers the polymer-bile salt superstructures would get advantage of a complex chirality at molecular and supramolecular levels, whose effect on the nanocarrier assisted drug efficiency is a still unexplored fascinating issue.

Morphologies and Structure of Brain Lipid Membrane Dispersions.

This study aims to explore the variety of previously unknown morphologies that brain lipids form in aqueous solutions. We study how these structures are dependent on cholesterol content, salt solution composition, and temperature. For this purpose, dispersions of porcine sphingomyelin with varying amounts of cholesterol as well as dispersions of porcine brain lipid extracts were investigated. We used cryo-TEM to investigate the dispersions at high-salt solution content together with small-angle (SAXD) and wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) for dispersions in the corresponding salt solution at high lipid content. Sphingomyelin forms multilamellar vesicles in large excess of aqueous salt solution. These vesicles appear as double rippled bilayers in the images and as split Bragg peaks in SAXD together with a very distinct lamellar phase pattern. These features disappear with increasing temperature, and addition of cholesterol as the WAXD data shows that the peak corresponding to the chain crystallinity disappears. The dispersions of sphingomyelin at high cholesterol content form large vesicular type of structures with smooth bilayers. The repeat distance of the lamellar phase depends on temperature, salt solution composition, and slightly with cholesterol content. The brain lipid extracts form large multilamellar vesicles often attached to assemblies of higher electron density. We think that this is probably an example of supra self-assembly with a multiple-layered vesicle surrounding an interior cubic microphase. This is challenging to resolve. DSC shows the presence of different kinds of water bound to the lipid aggregates as a function of the lipid content. Comparison with the effect of lithium, sodium, and calcium salts on the structural parameters of the sphingomyelin and the morphologies of brain lipid extract morphologies demonstrate that lithium has remarkable effects also at low content.

Electron Microscopy Studies of Local Structural Modulations in Zeolite Crystals.

Zeolites are widely used in catalysis, gas separation, ion exchange, etc. due to their superior physicochemical properties, which are closely related to specific features of their framework structures. Although more than two hundred different framework types have been recognized, it is of great interest to explore from a crystallographic perspective, the atomic positions, surface terminations, pore connectivity and structural defects that deviate from the ideal framework structures, namely local structural modulation. In this article, we review different types of local modulations in zeolite frameworks using various techniques, especially electron microscopy (EM). The most recent advances in resolving structural information at the atomic level with aberration corrected EM are also presented, commencing a new era of gaining atomic structural information, not only for all tetrahedral atoms including point vacancies in framework but also for extra-framework cations and surface terminations.

Anisotropic mesoporous silica/microgel core-shell responsive particles.

Hybrid anisotropic microgels were synthesised using mesoporous silica as core particles. By finely controlling the synthesis conditions, the latter can be obtained with different shapes such as platelets, primary particles or rods. Using the core particles as seeds for precipitation polymerisation, a crosslinked poly(N-isopropylacrylamide) (PNIPAM) microgel shell could be grown at the surface, conferring additional thermo-responsive properties. The different particles were characterised using scattering and imaging techniques. Small angle X-ray scattering (SAXS) was employed to identify the shape and porous organisation of the core particles and dynamic light scattering (DLS) to determine the swelling behaviour of the hybrid microgels. In addition, cryogenic transmission electron microscopy (cryo-TEM) imaging of the hybrids confirms the different morphologies as well as the presence of the microgel network and the core-shell conformation. Finally, the response of the particles to an alternating electric field is demonstrated for hybrid rod-shaped microgels in situ using confocal laser scanning microscopy (CLSM).

Block copolymers as bile salt sequestrants: intriguing structures formed in a mixture of an oppositely charged amphiphilic block copolymer and bile salt.

To study the formation and characterize the structure of mixed complexes of oppositely charged block copolymers and surfactants are of great significance for practical applications, e.g., in drug carrier formulations that are based on electrostatically assisted assembly. In this context, biocompatible block copolymers and biosurfactants (like bile salts) are particularly interesting. In this work, we report on the co-assembly in dilute aqueous solution between a cationic poly(N-isopropyl acryl amide) (PNIPAM) diblock copolymer and the oppositely charged bile salt surfactant sodium deoxycholate at ambient temperature. The cryogenic transmission electron microscopy (cryo-TEM) experiments revealed the co-existence of two types of co-assembled complexes of radically different morphology and inner structure. They are formed mainly as a result of the electrostatic attraction between the positively charged copolymer blocks and bile salt anions and highlight the potential of using linear amphiphilic block copolymers as bile salt sequestrants in the treatment of bile acid malabsorption and hypercholesterolemia. The first complex of globular morphology has a coacervate core of deoxycholate anions and charged copolymer blocks surrounded by a PNIPAM corona. The second complex has an intriguing tape-like supramolecular morphology of several micrometer in length that is striped in the direction of the long axis. A model is presented in which the stretched cationic blocks of several block copolymers interact electrostatically with the bile salt molecules that are associated to form a zipper-like structure. The tape is covered on both sides by the PNIPAM chains that stabilize the overall complex in solution. In addition to cryo-TEM, the mixed system was investigated in a range of molar charge fractions at a constant copolymer concentration by static light scattering, small angle X-ray scattering, and electrophoretic mobility measurements.

Stability and behaviour in aqueous solutions of the anionic cubic silsesquioxane substituted with tetramethylammonium.

The aqueous behaviour of the anionic octa-tetramethylammonium substituted cubic silsesquioxane, [N(CH3)4]8[Si8O20], was studied with quantitative 29Si-NMR. This molecule partially fragments in aqueous solutions, forming several smaller entities. The most abundant silica species are the monomer, dimer, cyclic trimer, cyclic tetramer and double three-ring. Higher concentrations are required in order to prevent complete fragmentation of the cubic structure. Additives such as alcohols and tetraalkylammonium salts have a stabilising effect on the cubic silsesquioxane, unlike sodium salts that destabilise it. A high concentration solution, containing the non-fragmented molecule as well as entities resulting from fragmentations, was investigated with neutron scattering coupled with modelling, using empirical potential structure refinement (EPSR). The modelling reveals that TMA+ ions coordinates to all different silica species, with approximately three TMA+ per cube. These are located at the faces of the cube.

TEMPO-oxidised cellulose nanofibrils; probing the mechanisms of gelation via small angle X-ray scattering.

The structure of dispersions of TEMPO-oxidised cellulose nanofibrils (OCNF), at various concentrations, in water and in NaCl aqueous solutions, was probed using small angle X-ray scattering (SAXS). OCNF are modelled as rod-like particles with an elliptical cross-section of 10 nm and a length greater than 100 nm. As OCNF concentration increases above 1.5 wt%, repulsive interactions between fibrils are evidenced, modelled by the interaction parameter νRPA > 0. This corresponds to gel-like behaviour, where G' > G'' and the storage modulus, G', shows weak frequency dependence. Hydrogels can also be formed at OCNF concentration of 1 wt% in 0.1 M NaCl(aq). SAXS patterns shows an increase of the intensity at low angle that is modelled by attractive interactions (νRPA < 0) between OCNF, arising from the screening of the surface charge of the fibrils. Results are supported by ζ potential and cryo-TEM measurements.

Zeolite Beta Formation from Clear Sols: Silicate Speciation, Particle Formation and Crystallization Monitored by Complementary Analysis Methods.

The formation of silicate nanoaggregates (NAs) at the very early stages of precursor sols and zeolite beta crystallization from silicate nanoparticles (NPs) are investigated in detail using a combination of different analysis methods, including liquid-state 29 Si, 27 Al, 14 N, and 1 H NMR spectroscopy, mass spectrometry (MS), small-angle X-ray scattering (SAXS), X-ray diffraction (XRD), and transmission electron microscopy at cryogenic temperatures (cryo-TEM). Prior to hydrothermal treatment, silicate NAs are observed if the Si/OH ratio in the reaction mixture is greater than 1. Condensation of oligomers within the NAs then generates NPs. Aluminum doped into the synthesis mixtures is located exclusively in the NPs, and is found exclusively in a state that is fourfold connected to silicate, favoring their condensation and aggregation. These results are in agreement with general trends observed for other systems. Silicate NAs are essential intermediates for zeolite formation and are generated by the aggregation of hydrated oligomers, aluminate, and templating cations. Subsequent further intra-nanoaggregate silicate condensation results in the formation of NPs. 1 H and 14 N liquid NMR as well as diffusion ordered spectroscopy (DOSY) experiments provide evidence for weakly restricted rotational and translational mobility of the organic template within NAs as a consequence of specific silicate-template interactions. NAs thus appear as key species in clear sols, and their presence in the precursor sol favors silicate condensation and further crystallization, promoted either by increasing the Si/OH ratio or by heating.

Outset of the Morphology of Nanostructured Silica Particles during Nucleation Followed by Ultrasmall-Angle X-ray Scattering.

Nucleation and growth of SBA-15 silica nanostructured particles with well-defined morphologies has been followed with time by small-angle X-ray scattering (SAXS) and ultrasmall-angle X-ray scattering (USAXS), using synchrotron radiation. Three different morphologies have been compared: platelets, toroids, and rods. SEM observations of the particles confirm that two key physical parameters control the morphology: the temperature and the stirring of the solution. USAXS curves demonstrate that primary particles with a defined shape are present very early in the reaction mixture, immediately after a very fast nucleation step. This nucleation step is detected at 10 min (56 °C) or 15 min (50 °C) after the addition of the silica precursor. The main finding is that the USAXS signal is different for each type of morphology, and we demonstrate that the difference is related to the shape of the particles, showing characteristic form factors for the different morphologies (platelet, toroid, and rod). Moreover, the size of the mesocrystal domains is correlated directly with the particle dimensions and shape. When stirred, aggregation between primary particles is detected even after 12 min (56 °C). The platelet morphology is promoted by constant stirring of the solution, through an oriented aggregation step between primary particles. In contrast, toroids and rods are only stabilized under static conditions. However, for toroids, aggregation is detected almost immediately after nucleation.

A neutron scattering and modelling study of aqueous solutions of tetramethylammonium and tetrapropylammonium bromide.

We have investigated the properties in water of two tetraalkylammonium bromides (tetramethylammonium, TMA(+), and tetrapropylammonium, TPA(+)), at 0.4 M, using neutron scattering coupled with empirical potential structure refinement to arrive at an atomistic description. Having both a polar and an apolar moiety, it is of interest to determine the strength of each moiety as a function of the alkyl chain length. TMA(+) and TPA(+), having different impact as structure directors in zeolite synthesis, were chosen for this study. Water arranges tetrahedrally around TMA(+) and in an almost featureless manner around TPA(+). TMA(+) and TPA(+) show an apolar hydration with TPA(+) being slightly more apolar. TPA(+) has a tendency to form small clusters of 2-4 molecules and to fold into a compact configuration. Both molecules correlate similarly with the bromide ion but do not dissociate completely at this concentration.

Effect of Polyelectrolyte and Fatty Acid Soap on the Formation of CaCO3 in the Bulk and the Deposit on Hard Surfaces.

The effects of sodium polyacrylate (NaPAA) as well as potassium oleate on the nucleation and calcium carbonate crystal growth on hard surfaces, i.e., stainless steel and silica, have been investigated at different temperatures. The relation between the surface deposition and the corresponding bulk processes has been revealed by combining dynamic light scattering (DLS), scanning electron microscopy (SEM), X-ray diffraction (XRD), and ellipsometry. The aim was to further our understanding of the crystal deposition/growth mechanism and how it can be controlled by the presence of polyelectrolytes (NaPAA) or soap (potassium oleate). The addition of polyelectrolytes (NaPAA) or soap (potassium oleate) decreases the size of CaCO3 particles in bulk solution and affects both crystal structure and morphology in the bulk as well as on hard surfaces. The amount of particles on hard surfaces decreases significantly in the presence of both potassium oleate and NaPAA. This was found to be a consequence of potassium oleate or NaPAA adsorption on the hard surface as well as on the CaCO3 crystal surfaces. Here, the polymer NaPAA exhibited a stronger inhibition effect on the formation and growth of CaCO3 particles than potassium oleate.

The dynamic association processes leading from a silica precursor to a mesoporous SBA-15 material.

During the last two decades, the synthesis of silica with an ordered mesoporous structure has been thoroughly explored. The basis of the synthesis is to let silica monomers polymerize in the presence of an amphiphilic template component. In the first studies, cationic surfactants were used as structure inducer. Later it was shown that pluronic copolymers also could have the role. One advantage with the pluronics copolymers is that they allow for a wider variation in the radius of pores in the resulting silica material. Another advantage lies in the higher stability resulting from the thicker walls between the pores. Mesoporous silica has a very high area to volume ratio, and the ordered structure ensures surface homogeneity. There are a number of applications of this type of material. It can be used as support for catalysts, as templates to produces other mesoporous inorganic materials, or in controlled release applications. The synthesis of mesoporous silica is, from a practical point of view, simple, but there are significant possibilities to vary synthesis conditions with a concomitant effect on the properties of the resulting material. It is clear that the structural properties on the nanometer scale are determined by the self-assembly properties of the amphiphile, and this knowledge has been used to optimize pore geometry and pore size. To have a practical functional material it is desirable to also control the structure on a micrometer scale and larger. In practice, one has largely taken an empirical approach in optimizing reaction conditions, paying less attention to underlying chemical and physicochemical mechanisms that lead from starting conditions to the final product. In this Account, we present our systematic studies of the processes involved not only in the formation of the mesoporous structure as such, but also of the formation of structures on the micrometer scale. The main point is to show how the ongoing silica polymerization triggers a sequence of structural changes through the action of colloidal interactions. Our approach is to use a multitude of experimental methods to characterize the time evolution of the same highly reproducible synthesis process. It is the silica polymerization reactions that set the time scale, and the block copolymer self-assembly responds to the progress of the polymerization through a basically hydrophobic interaction between silica and ethylene oxide units. The progression of the silica polymerization leads to an increased hydrophobicity triggering an aggregation process resulting in the formation of silica-copolymer composite particles of increasing size. The particle growth occurs in a stepwise way caused by intricate shifts between colloidal stability and instability. By tuning reaction conditions one can have an end product of hexagonal prism composite particles with single crystal 2D hexagonal order.

In situ X-ray polymerization: from swollen lamellae to polymer-surfactant complexes.

The influence of the monomer diallyldimethylammonium chloride (D) on the lamellar liquid crystal formed by the anionic surfactant aerosol OT (AOT) and water is investigated, determining the lamellar spacings by SAXS and the quadrupolar splittings by deuterium NMR, as a function of the D or AOT concentrations. The cationic monomer D induces a destabilization of the AOT lamellar structure such that, at a critical concentration higher than 5 wt %, macroscopic phase separation takes place. When the monomer, which is dissolved in the AOT lamellae, is polymerized in situ by X-ray initiation, a new collapsed lamellar phase appears, corresponding to the complexation of the surfactant with the resulting polymer. A theoretical model is employed to analyze the variation of the interactions between the AOT bilayers and the stability of the lamellar structure.

Formation of CaCO3 deposits on hard surfaces--effect of bulk solution conditions and surface properties.

We have studied nucleation and crystal growth of calcium carbonate on hard surfaces, i.e. stainless steel and silica, at different temperatures, in relation to the corresponding bulk processes, using scanning electron microscopy (SEM), X-ray diffraction (XRD), and ellipsometry. In the bulk solution, a mixture of all three calcium carbonate crystalline polymorphs, calcite, aragonite, and vaterite, as well as amorphous particles was observed at 25 °C, while at 55 °C aragonite and calcite crystals dominated. On surfaces only calcite crystals were observed at 25 °C, whereas aragonite and calcite crystal adsorbed on the surfaces at 55 °C. Two kinds of nucleation and adsorption mechanism of CaCO3 crystals on hard surfaces were observed, depending on the surface orientation (vertical or horizontal, i.e., subject to sedimentation) in the bulk solution. A model for the relation between interfacial layer structure, the substrate, and the solution crystallization is discussed based on the observed difference in deposition between type of surfaces and surface orientation. In addition, the effect of magnesium ion on the morphology of calcium carbonate crystals is discussed.

The use of in situ and ex situ techniques for the study of the formation mechanism of mesoporous silica formed with non-ionic triblock copolymers.

Since the discovery of the mesoporous silica material templated by ionic surfactants and the subsequent development of materials templated by non-ionic surfactants and polymers, for example SBA-15, there has been a continuous research effort towards understanding their formation. In situ methodologies, such as Small Angle X-ray Scattering (SAXS), Small Angle Neutron Scattering (SANS), spectroscopic techniques like NMR and EPR, and ex situ methodologies such as electron microscopy techniques (SEM, TEM and cryo-TEM) are powerful and important tools in the investigation of the mechanism by which these materials form. The need for a fundamental understanding of the systems is of academic concern and of great importance when developing materials for applications. In this tutorial review we aim to give the reader a comprehensive overview on the development of the field over the years and an introduction to the experimental in situ and ex situ techniques that have been used.

Transient colloidal stability controls the particle formation of SBA-15.

A hypothesis about (transient) colloidal stability as a controlling mechanism for particle formation in SBA-15 is presented. The hypothesis is based on results from both in situ and ex situ investigations, including cryogenic transmission electron microscopy (cryo-TEM), UV-vis spectroscopy, and dynamic light scattering (DLS). Cryo-TEM images show that particles grow via the formation of silica-Pluronic-water "flocs", which coalesce in a seemingly arbitrary manner. Despite this, the final material consists of well-defined particles with a small size distribution. We argue that the interface between the flocs and surrounding media is covered by Pluronic molecules, which provide steric stabilization. As the flocs grow, the coverage of polymers at the interface is increased until a stable size is reached, and that regulates the particle size. By targeting the characteristics of the Pluronic molecules, during the on-going synthesis, the hypothesis is tested. The results are consistent with the concept of (transient) colloidal stability.

Mapping the location of grafted PNIPAAM in mesoporous SBA-15 silica using gas adsorption analysis.

The thermoresponsive polymer poly-N-isopropylacrylamide (PNIPAAM) was grafted in mesoporous SBA-15 silica. The grafting process consists of three steps: (i) increasing the amount of surface silanol groups of SBA-15 by hydroxylation, (ii) attachment of an anchor (1-(trichlorosilyl)-2-(m/p-(chloromethylphenyl)ethane) and finally (iii) the polymerization of the monomers (NIPAAM) onto the anchor. After each step, the materials were characterized regarding the porosity, using inert gas (argon, nitrogen) physisorption measurements. Also, the structure was investigated by small-angle X-ray diffraction analysis and thermogravimetric analysis was used for determination of the amount of grafted material. A total of 17% by weight of organic material was introduced in the porous host and the structure was preserved during the grafting process. Physisorption measurements revealed that the anchor is mainly located in the intrawall pores present in SBA-15. Consequently, the polymer is preferentially located in the intrawall pores or in the vicinity thereof. The final mesopore volume is 0.47 cm(3) g(-1) as compared to 0.96 cm(3) g(-1) for the pure SBA-15. The surprisingly large loss of mesopore volume and an almost constant mesopore diameter is consistent with a partial sealing of the mesopore volume in the composite materials. The potential thermocontrol combined with the large mesoporosity and the possible "storage space" provided by the sealed mesopore volume leads to a material with possibilities for various applications.

Assessment of porosities of SBA-15 and MCM-41 using water sorption calorimetry.

Water sorption calorimetry has been used for characterization of 2D hexagonally ordered mesoporous silica SBA-15. Experimental data on water sorption isotherm, the enthalpy, and the entropy of hydration of SBA-15 are presented. The results were compared with previously published results on MCM-41 obtained using the same technique. The water sorption isotherm of SBA-15 consists of four regimes, while the sorption isotherm of MCM-41 consists only of three. The extra regime in the water sorption isotherm for SBA-15 arises from filling of intrawall pores, that are present in SBA-15 but absent in MCM-41. The water sorption isotherms of the two types of mesoporous silica were analyzed using the Barrett-Joyner-Halenda approach. For the BJH analysis, t-curves of silica with different degrees of hydroxylation were proposed. Comparison of water and nitrogen t-curves shows that, independent of hydroxylation of silica surface, the adsorbed film of water is much thinner than the adsorbed film of nitrogen at similar relative pressures. This fact decreases the uncertainty of the assessment of porosity with water sorption originated from variations in surface properties. The pore size distribution of SBA-15 calculated with BJH treatment of water sorption data is in good agreement with nitrogen NLDFT results on the same material.

Vesicle and bilayer formation of diphytanoylphosphatidylcholine (DPhPC) and diphytanoylphosphatidylethanolamine (DPhPE) mixtures and their bilayers' electrical stability.

Lipid bilayers are of interest in applications where a cell membrane mimicking environment is desired. The performance of the lipid bilayer is largely dependent on the physical and chemical properties of the component lipids. Lipid bilayers consisting of phytanoyl lipids have proven to be appropriate choices since they exhibit high mechanical and chemical stability. In addition, such bilayers have high electrical resistances. Two different phytanoyl lipids, 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) and 1,2-diphytanoyl-sn-glycero-3-phosphoethanolamine (DPhPE), and various combinations of the two have been investigated with respect to their behavior in aqueous solutions, their interactions with solid surfaces, and their electrical stability. Dynamic light scattering, nuclear magnetic resonance diffusion, and cryogenic transmission electron microscopy measurements showed that pure DPhPC as well as mixtures of DPhPC and DPhPE consisting of greater than 50% (mol%) DPhPC formed unilamellar vesicles. If the total lipid concentration was greater than 0.15g/l, then the vesicles formed solid-supported bilayers on plasma-treated gold and silica surfaces by the process of spontaneous vesicle adsorption and rupture, as determined by quartz crystal microbalance with dissipation monitoring and atomic force microscopy. The solid-supported bilayers exhibited a high degree of viscoelasticity, probably an effect of relatively high amounts of imbibed water or incomplete vesicle fusion. Lipid compositions consisting of greater than 50% DPhPE formed small flower-like vesicular structures along with discrete liquid crystalline structures, as evidenced by cryogenic transmission electron microscopy. Furthermore, electrophysiology measurements were performed on bilayers using the tip-dip methodology and the bilayers' capacity to retain its electrical resistance towards an applied potential across the bilayer was evaluated as a function of lipid composition. It was shown that the lipid ratio significantly affected the bilayer's electrical stability, with pure DPhPE having the highest stability followed by 3DPhPC:7DPhPE and 7DPhPC:3DPhPE in decreasing order. The bilayer consisting of 5DPhPC:5DPhPE had the lowest stability towards the applied electrical potential.

The effect of PAMAM G6 dendrimers on the structure of lipid vesicles.

Dendrimers are polymers with unique properties that make them promising in a variety of applications such as potential drug and gene delivery systems. PAMAM dendrimers, in particular, have been widely investigated and are efficiently translocated into the cell. The mechanism of translocation, however, is still unknown. Recently it was proposed that PAMAM dendrimers are able to open holes in lipid bilayers by stealing lipid from the bilayer and forming "dendrisomes". The present work intends to contribute in the clarification of this question: why are dendrimers able to translocate into the cell? We create simple models for cell membranes by using small lipid vesicles that present a single lipid phase at physiologically relevant conditions. We then follow the effect that dendrimers have on the structure of the vesicles by using a combination of various techniques: dynamic light scattering, cryo-TEM and small angle X-ray scattering. We discuss our results with respect to the previous findings and reflect on their possible implications for real translocation in living cells.