Dust dynamics: distribution patterns of semi-volatile organic chemicals across particle sizes in varied indoor microenvironments.

An extensive analysis of the distribution patterns of three distinct classes of semi-volatile organic chemicals (SVOCs)-phthalates (PAEs), organophosphate flame retardants (OPFRs), and polycyclic aromatic hydrocarbons (PAHs)-across four distinct size fractions of dust (25, 50, 100, and 200 µm) was conducted. The dust samples were sourced from AC filter, covered car parking lots, households, hotels, mosques, and car floors. To generate the four fractions, ten dust samples from each microenvironment were pooled and sieved utilizing sieving apparatus with the appropriate mesh size. Selected SVOCs were quantified utilizing gas chromatography-mass spectrometry in electron impact (EI) mode. Results unveiled diverse contamination levels among dust fractions, showcasing car parking lot dust with the lowest chemical contamination, while car floor dust displayed the highest levels of PAHs and OPFRs, peaking at 28.3 µg/g and 43.2 µg/g, respectively. In contrast, mosque and household floor dust exhibited the highest concentrations of phthalates, with values of 985 µg/g and 846 µg/g, respectively. Across the analyzed microenvironments, we observed a trend where concentrations of SVOCs tended to rise as dust particles decreased in size, forming a visually striking pattern. This phenomenon was particularly pronounced in dust samples collected from car floors and parking lots. Among SVOCs, PAEs emerged as the predominant contributors with > 90% followed by OPFRs and PAHs. The high levels of OPFRs in car floor dust align logically with the fact that numerous interior components of cars are treated with OPFRs, within a compact indoor microenvironment, to comply to fire safety regulations. Furthermore, petroleum products are a major source of PAHs in the environment and all the sampled cars in the study had combustion engines. Consequently, car dust is more likely to be polluted with PAHs stemming from petroleum combustion. Although previous investigations have noted an increase in heavy metals and brominated flame retardants with decreasing dust particles, this is the first study analyzing these SVOCs in different fractions of dust from various microenvironments. However, aside from two specific microenvironments, the observed pattern of escalating SVOC concentrations with smaller dust particle sizes was not corroborated among the examined microenvironments. This divergence in concentration trends suggests the potential involvement of supplementary variables in influencing SVOC distributions within dust particles.

Investigation of VEGF (rs 699947) polymorphism in the progression of Rheumatoid Arthritis (RA) and in-silico nanoparticle drug delivery of potential phytochemicals to cure RA.

Mutation in the VEGF gene disturbs the production of chondrocytes and angiogenesis which are essential for cartilage health. Cytokines and chemokines produced by auto-activation of B-cells degrade cartilage. Bruton's Tyrosine Kinase (BTK) plays a crucial role in the activation of these B-cells. VEGF has a central part in angiogenesis, in the recruitment of endothelial cells, and is involved in mechanisms that result in tumour formation. The objective of this research is to investigate the potential role of VEGF polymorphism in the development of Rheumatoid Arthritis (RA) and the screening of potential natural, synthetic BTK inhibitor compounds as possible in-silico chemotherapeutic agents to control auto-activation of B-cells and cartilage degrading cytokines. In this study, it had been shown that allele A frequency was significantly higher than that of allele C in RA-positive patients as compared to controls. Hence it depicts that allele A of VEGF (rs699947) can increase the risk of RA while allele C has a protective role. The phytochemicals which showed maximum binding affinity at the inhibitory site of BTK include beta boswellic acid, tanshinone, and baicalin. These phytochemicals as BTK inhibitor give insights to use them as anti-arthritic compounds by nanoparticle drug delivery mechanism.

Toxic trespassers: Uncovering phthalates and organophosphate flame retardants in children's rooms and their health implications.

Organophosphate flame retardants (OPEs) and phthalates have garnered significant attention due to their widespread presence in indoor environments. Many recent investigations have reported extensive contamination of indoor dust, air, children's toys, and other environmental compartments with these chemicals. This research aimed to analyze OPEs and phthalates in air (PM10) and dust samples collected from the bedrooms of children (N = 30) residing in various households in Jeddah, Saudi Arabia. High mean levels (ng/g) of phthalates namely DEHP (1438600) and DnBP (159200) were found in indoor dust while TPhP (5620) was the major OPEs in indoor dust. Similarly, DEHP and DnBP were the predominant phthalates in PM10 samples, exhibiting mean levels of 560 and 680 ng/m3, respectively. However, TCPP was the main OPEs with average levels of 72 ng/m3 in PM10 samples. The majority of individual phthalates and OPEs were detected in 90-100 % of the dust samples, whereas in PM10 samples, their presence ranged from 25 % to 100 %. The concentrations of OPEs were notably greater than those of PBDEs and other BFRs previously reported in these samples, suggesting their broader use than alternative BFRs. The estimated long-term non-carcinogenic risk, hazardous index (HI) and daily exposure via dust for children was above threshold levels for DEHP. On the other hand, the cumulative risk of cancer was below the concerning levels. Further research is required to explore diverse groups of chemicals in indoor microenvironments particularly significant for children, such as kindergartens, primary schools, and their rooms at home.

Nanobiochar Associated Ammonia Emission Mitigation and Toxicity to Soil Microbial Biomass and Corn Nutrient Uptake from Farmyard Manure.

The unique properties of NB, such as its nano-size effect and greater adsorption capacity, have the potential to mitigate ammonia (NH3) emission, but may also pose threats to soil life and their associated processes, which are not well understood. We studied the influence of different NB concentrations on NH3 emission, soil microbial biomass, nutrient mineralization, and corn nutrient uptake from farmyard manure (FM). Three different NB concentrations i.e., 12.5 (NB1), 25 (NB2), and 50% (NB3), alone and in a fertilizer mixture with FM, were applied to corn. NB1 alone increased microbial biomass in soil more than control, but other high NB concentrations did not influence these parameters. In fertilizer mixtures, NB2 and NB3 decreased NH3 emission by 25% and 38%, respectively, compared with FM alone. Additionally, NB3 significantly decreased microbial biomass carbon, N, and soil potassium by 34%, 36%, and 14%, respectively, compared with FM. This toxicity to soil parameters resulted in a 21% decrease in corn K uptake from FM. Hence, a high NB concentration causes toxicity to soil microbes, nutrient mineralization, and crop nutrient uptake from the FM. Therefore, this concentration-dependent toxicity of NB to soil microbes and their associated processes should be considered before endorsing NB use in agroecosystems.

Environmental evaluation of polyhydroxyalkanoates from animal slaughtering waste using Material Input Per Service Unit.

The massive production and extensive use of fossil-based non-biodegradable plastics are leading to their environmental accumulation and ultimately cause health threats to animals, humans, and the biosphere in general. The problem can be overcome by developing eco-friendly ways for producing plastics-like biopolymers from waste residues such as of agricultural origin. This will solve two currently prevailing social issues: waste management and the efficient production of a biopolymer that is environmentally benign, polyhydroxyalkanoates (PHA). The current study assesses the environmental impact of biopolymer (PHA) manufacturing, starting from slaughterhouse waste as raw material. The Material Input Per Service Unit methodology (MIPS) is used to examine the sustainability of the PHA production process. In addition, the impact of shifting from business-as-usual energy provision (i.e., electricity from distribution grid network and heat provision from natural gas) to alternative renewable energy sources is also evaluated. As a major outcome, it is shown that the abiotic material contribution for PHA production process is almost double for using hard coal as an energy source than the petro-plastic low-density-poly(ethene) (LPDE), which PHA shall ultimately replace. Likewise, abiotic material contribution is 43 % and 7 % higher when using the electricity from the European electricity mix (EU-27 mix) and biogas, respectively, than in the case of LDPE production. However, PHA production based on wind power for energy provision has 12 % lower abiotic material input than LDPE. Furthermore, the water input decreases when moving from the EU-27 mix to wind power. The reduction in water consumption for various electricity provision resources amounts to 20 % for the EU-27 mix, 25 % for hard coal, 71 % for wind, and 70 % for biogas. As the main conclusion, it is demonstrated that using wind farm electricity to generate PHA is the most environmentally friendly choice. Biogas is the second-best choice, although it requires additional abiotic material input.

Gaseous and soil OCPs and PCBs along the Indus River, Pakistan: spatial patterns and air-soil gradients.

This study presents first-hand information on the occurrence of persistent organic pollutants (POPs) in the ambient air and surface soil along the Indus flood-plain, Pakistan. The sampling campaign was conducted at 15 site locations during 2014-15, along the Indus River (approximately 1300 km). Composite surface soil samples (N = 15) and passive air samples (N = 15) were collected for the estimation of gaseous POPs as well as air-soil exchange to evaluate the POP emission and distribution or dispersion patterns, source tracking, and contribution of the local and regional sources towards POP accumulation in the Indus River system. Among the studied POPs, levels of DDTs and PCBs were noticeably higher in ambient air (50-560 and 10-1100 pg m-3) and in soil (0.20-350 and 1.40-20 ng g-1), respectively. Regarding the spatial patterns, higher DDT concentrations (ng g-1) were detected in the air and soil samples collected from the wet mountain zone (WMZ) (p < 0.05), followed by the alluvial riverine zone (ARZ), low-lying mountain zone (LLZ), and frozen mountain zone (FMZ). The PCB data did not exhibit significant differences (p > 0.05) for the air samples, while PCB concentrations were significantly higher (p < 0.05) in soil from the LLZ, which may be associated with rapid urbanization and industrial activities in this area. The air-soil exchange of DDTs and PCBs showed net volatilization at most of the studied sites except for a few samples from the FMZ and WMZ. Results of this study about air-soil exchange gradients indicate the long range regional atmospheric transport (LRAT) of POPs to the colder areas (FMZ) of Pakistan, where these act as a secondary source of POPs in these areas.

Profiling of phthalates, brominated, and organophosphate flame retardants in COVID-19 lockdown house dust; implication on the human health.

In this study, brominated flame retardants (BFRs), phthalates, and organophosphate flame retardants (PFRs) were analyzed in indoor household dust collected during the COVID-19 related strict lockdown (April-July 2020) period. Floor dust samples were collected from 40 households in Jeddah, Saudi Arabia. The levels of most of the analyzed chemicals were visibly high and for certain chemicals multifold high in analyzed samples compared to earlier studies on indoor dust from Jeddah. Bis (2-ethylhexyl) phthalate (DEHP) was the primary chemical in these dust samples, with a median concentration of 769,500 ng/g of dust. Tris (2-butoxy ethyl) phosphate (TBEP) and Decabromodiphenyl ether (BDE 209) contributed the highest among PFRs and BFRs with median levels of 5990 and 940 ng/g of dust, respectively. The estimated daily exposure in the worst case scenario (23,700 ng/kg bw/day) for Saudi children was above the reference dose (20,000 ng/kg bw/day) for DEHP, and the hazardous index (HI) was also >1. The long-term carcinogenic risk was above the 1 × 10-5, indicating a risk to the health of Saudi young children from getting exposed to DEHP from indoor dust. This study draws attention to the increased indoor pollution during the lockdown period when all of the daily activities by adults and children were performed indoors, which negatively impacted human health, as suggested by the calculated risk. However, the current study has limitations and warrants more monitoring studies from different parts of the world to understand the phenomenon. At the same time, this study also highlights another side of COVID-19 related to our lives.

Molecularly tracing of children exposure pathways to environmental organic pollutants and the Autism Spectrum Disorder Risk.

Organic pollutants (OPs) including organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and polycyclic aromatic hydrocarbons (PAHs) have showed neuro-damaging effects, but studies concerning the autism spectrum disorder (ASD) risk are limited. A case-control study with ASD (n = 125) and healthy control (n = 125) children was conducted on the different land use settings across Punjab, Pakistan. Serum concentrations of 26 OCPs, 29 PCB congeners, 11 PBDEs and 32 PAHs were measured. Serum PCB77 (AOR = 2.00; 95% CI: 1.43, 2.18), PCB118 (AOR = 1.49; 95% CI: 1.00, 2.00), PCB128 (AOR = 1.65; 95% CI: 1.01, 1.91), PCB153 (AOR = 1.80; 95% CI: 1.55, 1.93) were significantly higher, but PCB187 (AOR = 0.37; 95% CI: 0.24, 0.49) was significantly lower in the ASD cases when compared to the controls. Serum BDE99 (AOR = 0.48; 95% CI: 0.26, 0.89) was significantly higher in the healthy controls than in the ASD cases. Among the analyzed OCPs, p,p'-DDE (AOR = 1.50; 95% CI: 1.00, 1.85) was significantly elevated in the ASD cases with comparison in the controls. For PAHs, serum dibenzothiophene (AOR = 7.30; 95% CI: 1.49, 35.85) was significantly higher in the ASD, while perylene (AOR = 0.25; 95% CI: 0.06, 1.10) and fluorene (AOR = 0.21; 95% CI: 0.06, 0.72) were significantly higher in the controls. In addition, many of the serum pollutants were significantly associated with GSTT1, GSTM1 (null/present polymorphism) and presented the genotypic variation to respond xenobiotics in children. The children living in proximity to urban and industrial areas had a greater exposure to most of the studied pollutants when compared to the rural children, however children residing in rural areas showed higher exposure to OCPs. This comprehensive study documents an association between environmental exposure risk of several organic pollutants (OPs) from some contaminated environmental settings with ASD risk in children from Pakistan.

Freely dissolved organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) along the Indus River Pakistan: spatial pattern and risk assessment.

Freely dissolved OCPs and PCBs were measured by using polyethylene passive samplers at 15 sites during 2014 throughout the stretch of the Indus River to investigate the spatial pattern and risk assess. Levels (pg/L) of dissolved ∑OCPs and ∑PCBs ranged from 34 to 1600 and from 3 to 230. Among the detected OCPs, dissolved DDTs (p,p'-DDE, followed by p,p'-DDT) predominated with levels of 0.48 to 220 pg/L. The order of occurrence for other studied OCPs was as follows: HCB, endosulfans, chlordanes, and HCHs. Spatially, dissolved (pg/L) ∑OCPs varied (p < 0.05) as the following: surface water of the alluvial riverine zone (ARZ) showed the highest levels (114) followed by the frozen mountain zone (FMZ) (52.9), low-lying zone (LLZ) (28.73), and wet mountain zone (WMZ) (14.43), respectively. However, our zone-wise PCB data did not exhibit significant differences (p > 0.05). Principal component analysis/multilinear regression results showed pesticide usage in the crop/orchard fields and health sector, electric and electronic materials, and widespread industrial activities as the main source of OCPs and PCBs along the Indus River. Our results showed that OCPs and PCBs contaminated water intake, playing an important role towards the considerable cancer/non-cancer risk (HI and CR values) along the Indus River Flood-Plain.

Clinical Scenario and Imaging with Illustrations of Giant Cell Tumor of Bone: A Retrospective Analysis.

Background: The giant cell tumour of the bone has a spectrum of clinical-radiological presentation. This study aims to describe this varied presentation in our institution. Methods: This retrospective study was conducted on twenty-nine pathologically labelled cases of giant cell tumours of the bone. The medical records for their clinical presentation and diagnostic imaging studies were studied and evaluated. Results: Mean age of the patients at presentation was 35.3±12.9 years. Pain, local swelling and restricted joint function were seen in 93 %, 58.6 % and 52 % patients, respectively. The cortical breach was seen in 15 (51.7 %) and 22 (75.9 %) lesions on plain radiographs and CT images, respectively. 14(48.3 %) cases had soft tissue invasion on MRI at presentation. 26 (89.7 %) lesions were located within 1 cm from the articular cartilage. The solid tumour component was hypo to iso-intense in signal intensity in 27 (93.1 %) lesions in T1 weighted and 21 (72.4 %) in T2 weighted images. 14 (48.3 %) had hyperintense cystic areas, and fluid-fluid levels, suggestive of aneurysmal bone cysts, were seen in 4 (13.8 %) cases on T2 weighted images. Hypo-echoic nodular areas in solid tumour component, suggestive of hemosiderin deposits, were present in 3 (10.3 %) lesions on T1 and T2 weighted images. Conclusion: The tumour classically presents as an epiphysial-metaphyseal, eccentric, expansile, lytic lesion in a skeletally mature patient. The MRI picture is variable and the surgeon should have a sound knowledge of these variations to obtain a biopsy sample from a proper site of the lesion and to avoid misdiagnosis especially of a primary ABC.

Temperature, humidity and outdoor air quality indicators influence COVID-19 spread rate and mortality in major cities of Saudi Arabia.

There is an increasing evidence that meteorological (temperature, relative humidity, dew) and air quality indicators (PM2.5, PM10, NO2, SO2, CO) are affecting the COVID-19 transmission rate and the number of deaths in many countries around the globe. However, there are contradictory results due to limited observations of these parameters and absence of conclusive evidence on such relationships in cold or hot arid tropical and subtropical desert climate of Gulf region. This is the first study exploring the relationships of the meteorological (temperature, relative humidity, and dew) and air quality indicators (PM10,CO, and SO2) with daily COVID-19 infections and death cases for a period of six months (1st March to August 31, 2020) in six selected cities of the Kingdom of Saudi Arabia by using generalized additive model. The Akaike information criterion (AIC) was used to assess factors affecting the infections rate and deaths through the selection of best model whereas overfitting of multivariate model was avoided by using cross-validation. Spearman correlation indicated that exponentially weighted moving average (EWMA) temperature and relative humidity (R > 0.5, P < 0.0001) are the main variables affecting the daily COVID-19 infections and deaths. EWMA temperature and relative humidity showed non linear relationships with the number of COVID-19 infections and deaths (DF > 1, P < 0.0001). Daily COVID-19 infections showed a positive relationship at temperature between 23 and 34.5 °C and relative humidity ranging from 30 to 60%; a negative relationship was found below and/or above these ranges. Similarly, the number of deaths had a positive relationship at temperature ˃28.7 °C and with relative humidity ˂40%, showing higher number of deaths above this temperature and below this relative humidity rate. All air quality indicators had linear relationships with the number of COVID-19 infections and deaths (P < 0.0001). Hence, variation in temperature, relative humidity and air pollution indicators could be important factors influencing the COVID-19 spread and mortality. Under the current scenario with rising temperature and relative humidity, the number of cases is increasing, hence it justifies an active government policy to lessen COVID-19 infection rate.

Zinc Plus Biopolymer Coating Slows Nitrogen Release, Decreases Ammonia Volatilization from Urea and Improves Sunflower Productivity.

Currently, the global agriculture productivity is heavily relied on the use of chemical fertilizers. However, the low nutrient utilization efficiency (NUE) is the main obstacle for attaining higher crop productivity and reducing nutrients losses from these fertilizers to the environment. Coating fertilizer with micronutrients and biopolymer can offer an opportunity to overcome these fertilizers associated problems. Here, we coated urea with zinc sulphate (ZnS) and ZnS plus molasses (ZnSM) to control its N release, decrease the ammonia (NH3) volatilization and improve N utilization efficiency by sunflower. Morphological analysis confirmed a uniform coating layer formation of both formulations on urea granules. A slow release of N from ZnS and ZnSM was observed in water. After soil application, ZnSM decreased the NH3 emission by 38% compared to uncoated urea. Most of the soil parameters did not differ between ZnS and uncoated urea treatment. Microbial biomass N and Zn in ZnSM were 125 and 107% higher than uncoated urea, respectively. Soil mineral N in ZnSM was 21% higher than uncoated urea. Such controlled nutrient availability in the soil resulted in higher sunflower grain yield (53%), N (80%) and Zn (126%) uptakes from ZnSM than uncoated fertilizer. Hence, coating biopolymer with Zn on urea did not only increase the sunflower yield and N utilization efficiency but also meet the micronutrient Zn demand of sunflower. Therefore, coating urea with Zn plus biopolymer is recommended to fertilizer production companies for improving NUE, crop yield and reducing urea N losses to the environment in addition to fulfil crop micronutrient demand.

Brominated Flame Retardants in Children's Room: Concentration, Composition, and Health Risk Assessment.

Children spend most of their daily time indoors. Many of the items used indoors, such as furniture, electronics, textile, and children toys, are treated with chemicals to provide longevity and fulfil the safety standards. However, many chemicals added to these products are released into the environment during leaching out from the treated products. Many studies have reported brominated flame retardants (BFRs) in indoor environments; however, few have focused on environments specified for young children. In this study, paired air (PM10) and dust samples were collected from the rooms (n = 30) of Saudi children. These samples were analyzed for different congeners of polybrominated diphenyl ethers (PBDEs) and three important alternative flame retardants using gas chromatography-mass spectrometry. Decabromodiphenyl ether (BDE 209) was the most important analyzed BFR in dust and PM10 samples with a median value of 3150 ng/g of dust and 75 pg/m3. This indicates the wider application of BDE 209 has implications for its occurrence, although its use has been regulated for specified uses since 2014. Among alternative BFRs, 2-Ethylhexyl-2,3,4,5-tetrabromobenzoate (TBB), Bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate (TBPH), and 1,2-Bis(2,4,6-tribromophenoxy)ethane (BTBPE) were found with a median levels of 10, 15 and 8 ng/g of dust, respectively. However, alternative BFRs were present in <50% of the PM10 samples. The calculated long term and daily exposures via indoor dust and PM10 of Saudi children from their rooms were well below the respective reference dose (RfD) values. Nonetheless, the study highlights BDE 209 at higher levels than previously reported from household dust in Saudi Arabia. The study warrants further extensive research to estimate the different classes of chemical exposure to children from their rooms.

Police vs doctors: Harassment of Covid "heroes", by Covid "heroes"?

Violence against medical professionals and destruction of hospital property by frustrated patients and their relatives occur frequently in India (1) and in other countries (2, 3). However, harassment of healthcare workers by the police has, so far, not been an issue in the Indian healthcare system. Now, cases of harassment of medical professionals by the police have emerged during the Covid-19 pandemic. Ironically, both doctors and police personnel have been considered "frontline heroes" against the pandemic in India. We present some cases of such attacks.

Semi-Volatile Organic Compounds in Car Dust: A Pilot Study in Jeddah, Saudi Arabia.

People may spend a significant amount of their daily time in cars and thus be exposed to chemicals present in car dust. Various chemicals are emitted from during car use, contaminating the car dust. In this study, we compiled published and unpublished data on the occurrence of phthalates, flame retardants (FRs), polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) in Saudi car dust. Phthalates, a class of chemical commonly used as plasticizers in different car parts, were the major pollutants found in car dust, with a median value of ∑phthalates 1,279,000 ng/g. Among other chemicals, organophosphate flame retardants (OPFRs) were found to be between 1500-90,500 ng/g, which indicates their use as alternative FRs in the car industry. The daily exposure to Saudi drivers (regular and taxi drivers) was below the respective reference dose (RfD) values of the individual chemicals. However, the estimated incremental lifetime cancer risk (ILCR) values due to chronic exposure to these chemicals was >1 × 10-5 for taxi drivers for phthalates and PAHs, indicating that the long-term exposure to these chemicals is a cause of concern for drivers who spend considerable time in cars. The study has some limitations, due to the small number of samples, lack of updated RfD values, and missing cancer slope factors for many studied chemicals. Despite these limitations, this study indicates the possible range of exposure to drivers from chemicals in car dust and warrants further extensive studies to confirm these patterns.

Polycyclic Aromatic Hydrocarbons in Indoor Dust Collected during the COVID-19 Pandemic Lockdown in Saudi Arabia: Status, Sources and Human Health Risks.

To control the spread of coronavirus disease (COVID-19), Saudi Arabia's government imposed a strict lockdown during March-July 2020. As a result, the public was confined to indoors, and most of their daily activities were happening in their indoor places, which might have resulted in lower indoor environment quality. Polycyclic aromatic hydrocarbons (PAHs) were analyzed in household dust (n = 40) collected from different residential districts of Jeddah, Saudi Arabia, during the lockdown period. PAHs' levels were two folds higher than the previously reported PAHs in indoor dust from this region. We detected low molecular weight (LMW) with two to four aromatic ring PAHs in all the samples with a significant contribution from Phenanthrene (Phe), present at an average concentration of 1590 ng/g of dust. Although high molecular weight (HMW) (5-6 aromatic ring) PAHs were detected at lower concentrations than LMW PAHs, however, they contributed >90% in the carcinogenic index of PAHs. The estimated daily intake (EDI) of specific PAHs was above the reference dose (RfD) for young children in high-end exposure and the calculated Incremental Lifetime Cancer Risk (ILCR) was >1.00 × 10-4 for both Saudi adults and young children. The study highlighted that indoor pollution has increased significantly during lockdown due to the increased indoor activities and inversely affect human health. This study also warrants to conduct more studies involving different chemicals to understand the indoor environment quality during strict lockdown conditions.

Exposure to Phthalate and Organophosphate Esters via Indoor Dust and PM10 Is a Cause of Concern for the Exposed Saudi Population.

In this study, we measured the occurrence of organophosphate esters (OPEs) and phthalates in the settled dust (floor and air conditioner filter dust) and in suspended particulate matter (PM10) from different microenvironments (households (n = 20), offices (n = 10) and hotels (n = 10)) of Jeddah, Saudi Arabia. Bis (2-Ethylhexyl) phthalate (DEHP) was the major pollutant (contributing >85% of total chemicals burden) in all types of indoor dust with a concentration up to 3,901,500 ng g-1. While dibutyl phthalate (DBP) and DEHP together contributed >70% in PM10 (1900 ng m-3), which indicate PM10 as a significant source of exposure for DBP and DEHP in different Saudi indoor settings. Tris (1-chloro-2-propyl) phosphate (TCPP) was the major OPE in PM10 with a concentration of up to 185 ng m-3 and the occurrence of OPEs in indoor dust varied in studied indoor settings. The estimated daily intake (EDI) of studied chemicals via dust ingestion and inhalation of PM10 was below the reference dose (RfD) of individual chemicals. However, estimated incremental lifetime cancer risk (ILCR) with moderate risk (1.5 × 10-5) for Saudi adults and calculated hazardous index (HI) of >1 for Saudi children from DEHP showed a cause of concern to the local public health.

Sustainability Evaluation of Polyhydroxyalkanoate Production from Slaughterhouse Residues Utilising Emergy Accounting.

High raw material prices and rivalry from the food industry have hampered the adoption of renewable resource-based goods. It has necessitated the investigation of cost-cutting strategies such as locating low-cost raw material supplies and adopting cleaner manufacturing processes. Exploiting waste streams as substitute resources for the operations is one low-cost option. The present study evaluates the environmental burden of biopolymer (polyhydroxyalkanoate) production from slaughtering residues. The sustainability of the PHA production process will be assessed utilising the Emergy Accounting methodology. The effect of changing energy resources from business as usual (i.e., electricity mix from the grid and heat provision utilising natural gas) to different renewable energy resources is also evaluated. The emergy intensity for PHA production (seJ/g) shows a minor improvement ranging from 1.5% to 2% by changing only the electricity provision resources. This impact reaches up to 17% when electricity and heat provision resources are replaced with biomass resources. Similarly, the emergy intensity for PHA production using electricity EU27 mix, coal, hydropower, wind power, and biomass is about 5% to 7% lower than the emergy intensity of polyethylene high density (PE-HD). In comparison, its value is up to 21% lower for electricity and heat provision from biomass.

Arsenic and lead in the indoor residential settings of different socio-economic status; assessment of human health risk via dust exposure.

In the present study, occurrence of arsenic (As) and lead (Pb) is reported in rural and urban household dust (floor and AC filter dust) of the Kingdom of Saudi Arabia (KSA). Several studies have found concerning concentrations of these toxic metals in indoor dust from different countries, but data from this region is missing. The association between studied toxic metals and different socioeconomic parameters was investigated. Furthermore, health risk associated with these toxic metals via dust exposure was evaluated for the Saudi population. Mean concentration of Pb was several times higher than As in both types of dust samples. AC filter dust was more contaminated with these metals than floor dust. Levels of Pb were up to 775 ppm in AC filter dust from urban areas, while 167 ppm in rural AC filter dust. Different socioeconomic parameters did not influence much on the presence of studied metals in both AC and floor dust. To estimate health risk from contaminated dust hazardous index (HI), hazardous quotient (HQ), and incremental lifetime cancer risk (ILCR) via dust ingestion, inhalation, and dermal contact was calculate using USEPA equations. The ILCR range for both toxic metals was within the tolerable range of reference values of USEPA (1 × 10-5 to 5 × 10-7). Nonetheless, HI was close to 1 for Pb via dust exposure for young urban children, which signifies the risk of non-carcinogenic health problems in studied area. Graphical abstract.