Real-time differentiation of ethylbenzene and the xylenes using selected ion flow tube mass spectrometry.

RATIONALE: Monitoring of isomeric analytes using mass spectrometry usually requires a time-consuming chromatographic separation of the analytes before analysis. Selected ion flow tube mass spectrometry (SIFT-MS) can provide rapid direct analysis of ethylbenzene and xylene by utilizing the different reaction chemistry of the isomers. O2 + yields the same product ions from each isomer but in different ratios. OH- yields different product ions. METHODS: The reaction chemistry of C8 H10 with the reagent ion OH- generated from a microwave discharge of moist air in a commercial SIFT-MS instrument was utilized in this study. The product ion from OH- yielded ions at different masses for each isomer. To gain an understanding of how the product ion from ethylbenzene of HO2 - was generated, a theoretical study of the potential reaction surface was undertaken that accounted for the experimental observations. RESULTS: Measurements of OH- with ethylbenzene showed the product ion to be HO2 - at m/z 33. The reaction of OH- with xylene yielded the major product ion at m/z 105, C8 H9 - . HO2 - also underwent a slow secondary reaction with CO2 and O2 present from air in the samples. These findings were supported by calculations of the potential energy surface for the reactions. Measurements made on a certified gas mixture of ethylbenzene and xylene in the concentration range up to 5000 ppbv gave a linear response for each analyte. CONCLUSIONS: A fast, efficient method was developed for monitoring xylene and ethylbenzene in a mixture without the need for chromatographic separation before analysis using SIFT-MS.

High-Energy-Resolution Fluorescence-Detected X-ray Absorption of the Q Intermediate of Soluble Methane Monooxygenase.

Kα high-energy-resolution fluorescence detected X-ray absorption spectroscopy (HERFD XAS) provides a powerful tool for overcoming the limitations of conventional XAS to identify the electronic structure and coordination environment of metalloprotein active sites. Herein, Fe Kα HERFD XAS is applied to the diiron active site of soluble methane monooxygenase (sMMO) and to a series of high-valent diiron model complexes, including diamond-core [FeIV2(µ-O)2(L)2](ClO4)4] (3) and open-core [(O═FeIV-O-FeIV(OH)(L)2](ClO4)3 (4) models (where, L = tris(3,5-dimethyl-4-methoxypyridyl-2-methyl)amine) (TPA*)). Pronounced differences in the HERFD XAS pre-edge energies and intensities are observed for the open versus closed Fe2O2 cores in the model compounds. These differences are reproduced by time-dependent density functional theory (TDDFT) calculations and allow for the pre-edge energies and intensity to be directly correlated with the local active site geometric and electronic structure. A comparison of the model complex HERFD XAS data to that of MMOHQ (the key intermediate in methane oxidation) is supportive of an open-core structure. Specifically, the large pre-edge area observed for MMOHQ may be rationalized by invoking an open-core structure with a terminal FeIV═O motif, though further modulations of the core structure due to the protein environment cannot be ruled out. The present study thus motivates the need for additional experimental and theoretical studies to unambiguously assess the active site conformation of MMOHQ.

Halide-promoted dioxygenolysis of a carbon-carbon bond by a copper(II) diketonate complex.

A mononuclear Cu(II) chlorodiketonate complex was prepared, characterized, and found to undergo oxidative aliphatic carbon-carbon bond cleavage within the diketonate unit upon exposure to O2 at ambient temperature. Mechanistic studies provide evidence for a dioxygenase-type C-C bond cleavage reaction pathway involving trione and hypochlorite intermediates. Significantly, the presence of a catalytic amount of chloride ion accelerates the oxygen activation step via the formation of a Cu-Cl species, which facilitates monodentate diketonate formation and lowers the barrier for O2 activation. The observed reactivity and chloride catalysis is relevant to Cu(II) halide-catalyzed reactions in which diketonates are oxidatively cleaved using O2 as the terminal oxidant. The results of this study suggest that anion coordination can play a significant role in influencing copper-mediated oxygen activation in such systems.

Regioselective aliphatic carbon-carbon bond cleavage by a model system of relevance to iron-containing acireductone dioxygenase.

Mononuclear Fe(II) complexes ([(6-Ph(2)TPA)Fe(PhC(O)C(R)C(O)Ph)]X (3-X: R = OH, X = ClO(4) or OTf; 4: R = H, X = ClO(4))) supported by the 6-Ph(2)TPA chelate ligand (6-Ph(2)TPA = N,N-bis((6-phenyl-2-pyridyl)methyl)-N-(2-pyridylmethyl)amine) and containing a ß-diketonate ligand bound via a six-membered chelate ring have been synthesized. The complexes have all been characterized by (1)H NMR, UV-vis, and infrared spectroscopy and variably by elemental analysis, mass spectrometry, and X-ray crystallography. Treatment of dry CH(3)CN solutions of 3-OTf with O(2) leads to oxidative cleavage of the C(1)-C(2) and C(2)-C(3) bonds of the acireductone via a dioxygenase reaction, leading to formation of carbon monoxide and 2 equiv of benzoic acid as well as two other products not derived from dioxygenase reactivity: 2-oxo-2-phenylethylbenzoate and benzil. Treatment of CH(3)CN/H(2)O solutions of 3-X with O(2) leads to the formation of an additional product, benzoylformic acid, indicative of the operation of a new reaction pathway in which only the C(1)-C(2) bond is cleaved. Mechanistic studies show that the change in regioselectivity is due to the hydration of a vicinal triketone intermediate in the presence of both an iron center and water. This is the first structural and functional model of relevance to iron-containing acireductone dioxygenase (Fe-ARD'), an enzyme in the methionine salvage pathway that catalyzes the regiospecific oxidation of 1,2-dihydroxy-3-oxo-(S)-methylthiopentene to form 2-oxo-4-methylthiobutyrate. Importantly, this model system is found to control the regioselectivity of aliphatic carbon-carbon bond cleavage by changes involving an intermediate in the reaction pathway, rather than by the binding mode of the substrate, as had been proposed in studies of acireductone enzymes.

Photochemically initiated oxidative carbon-carbon bond-cleavage reactivity in chlorodiketonate Ni(II) complexes.

Three mononuclear Ni(II) complexes containing a 2-chloro-1,3-diketonate ligand and supported by the 6-Ph(2)TPA chelate, as well as analogues that lack the 2-chloro substituent on the ß-diketonate ligand, have been prepared and characterized. Upon irradiation at 350 nm under aerobic conditions, complexes containing the 2-chloro-substituted ligands undergo reactions to generate products resulting from oxidative cleavage, α-cleavage, and radical-derived reactions involving the 2-chloro-1,3-diketonate ligand. Mechanistic studies suggest that the oxidative cleavage reactivity, which leads to the production of carboxylic acids, is a result of the formation of superoxide, which occurs through reaction of reduced nickel complexes with O(2). The presence of the 2-chloro substituent was found to be a prerequisite for oxidative carbon-carbon bond-cleavage reactivity, as complexes lacking this functional group did not undergo these reactions following prolonged irradiation. The approach toward investigating the oxidative reactivity of metal ß-diketonate species outlined herein has yielded results of relevance to the proposed mechanistic pathways of metalloenzyme-catalyzed ß-diketonate oxidative cleavage reactions.

Mechanistic studies of the O2-dependent aliphatic carbon-carbon bond cleavage reaction of a nickel enolate complex.

The mononuclear nickel(II) enolate complex [(6-Ph(2)TPA)Ni(PhC(O)C(OH)C(O)Ph]ClO(4) (I) was the first reactive model complex for the enzyme/substrate (ES) adduct in nickel(II)-containing acireductone dioxygenases (ARDs) to be reported. In this contribution, the mechanism of its O(2)-dependent aliphatic carbon-carbon bond cleavage reactivity was further investigated. Stopped-flow kinetic studies revealed that the reaction of I with O(2) is second-order overall and is ∼80 times slower at 25 °C than the reaction involving the enolate salt [Me(4)N][PhC(O)C(OH)C(O)Ph]. Computational studies of the reaction of the anion [PhC(O)C(OH)C(O)Ph](-) with O(2) support a hydroperoxide mechanism wherein the first step is a redox process that results in the formation of 1,3-diphenylpropanetrione and HOO(-). Independent experiments indicate that the reaction between 1,3-diphenylpropanetrione and HOO(-) results in oxidative aliphatic carbon-carbon bond cleavage and the formation of benzoic acid, benzoate, and CO:CO(2) (∼12:1). Experiments in the presence of a nickel(II) complex gave a similar product distribution, albeit benzil [PhC(O)C(O)Ph] is also formed, and the CO:CO(2) ratio is ∼1.5:1. The results for the nickel(II)-containing reaction match those found for the reaction of I with O(2) and provide support for a trione/HOO(-) pathway for aliphatic carbon-carbon bond cleavage. Overall, I is a reasonable structural model for the ES adduct formed in the active site of Ni(II)ARD. However, the presence of phenyl appendages at both C(1) and C(3) in the [PhC(O)C(OH)C(O)Ph](-) anion results in a reaction pathway for O(2)-dependent aliphatic carbon-carbon bond cleavage (via a trione intermediate) that differs from that accessible to C(1)-H acireductone species. This study, as the first detailed investigation of the O(2) reactivity of a nickel(II) enolate complex of relevance to Ni(II)ARD, provides insight toward understanding the chemical factors involved in the O(2) reactivity of metal acireductone species.