Multiple and spectrally robust photonic magic angles in reconfigurable α-MoO3 trilayers.

The emergence of a topological transition of the polaritonic dispersion in twisted bilayers of anisotropic van der Waals materials at a given twist angle-the photonic magic angle-results in the diffractionless propagation of polaritons with deep-subwavelength resolution. This type of propagation, generally referred to as canalization, holds promise for the control of light at the nanoscale. However, the existence of a single photonic magic angle hinders such control since the canalization direction in twisted bilayers is unique and fixed for each incident frequency. Here we overcome this limitation by demonstrating multiple spectrally robust photonic magic angles in reconfigurable twisted α-phase molybdenum trioxide (α-MoO3) trilayers. We show that canalization of polaritons can be programmed at will along any desired in-plane direction in a single device with broad spectral ranges. These findings open the door for nanophotonics applications where on-demand control is crucial, such as thermal management, nanoimaging or entanglement of quantum emitters.

Twist-tunable polaritonic nanoresonators in a van der Waals crystal.

Optical nanoresonators are key building blocks in various nanotechnological applications (e.g., spectroscopy) due to their ability to effectively confine light at the nanoscale. Recently, nanoresonators based on phonon polaritons (PhPs)-light coupled to lattice vibrations-in polar crystals (e.g., SiC, or h-BN) have attracted much attention due to their strong field confinement, high quality factors, and their potential to enhance the photonic density of states at mid-infrared (mid-IR) frequencies, where numerous molecular vibrations reside. Here, we introduce a new class of mid-IR nanoresonators that not only exhibit the extraordinary properties previously reported, but also incorporate a new degree of freedom: twist tuning, i.e., the possibility of controlling their spectral response by simply rotating the constituent material. To achieve this result, we place a pristine slab of the van der Waals (vdW) α-MoO3 crystal, which supports in-plane hyperbolic PhPs, on an array of metallic ribbons. This sample design based on electromagnetic engineering, not only allows the definition of α-MoO3 nanoresonators with low losses (quality factors, Q, up to 200), but also enables a broad spectral tuning of the polaritonic resonances (up to 32 cm-1, i.e., up to ~6 times their full width at half maximum, FWHM ~5 cm-1) by a simple in-plane rotation of the same slab (from 0 to 45°). These results open the door to the development of tunable and low-loss IR nanotechnologies, fundamental requirements for their implementation in molecular sensing, emission or photodetection applications.

Hyperspectral Nanoimaging of van der Waals Polaritonic Crystals.

Phonon polaritons (PhPs) in van der Waals (vdW) crystal slabs enable nanoscale infrared light manipulation. Specifically, periodically structured vdW slabs behave as polaritonic crystals (vdW-PCs), where the polaritons form Bloch modes. Because the polariton wavelengths are smaller than that of light, conventional far-field spectroscopy does not allow for a complete characterization of vdW-PCs or for revealing their band structure. Here, we perform hyperspectral infrared nanoimaging and analysis of PhPs in a vdW-PC slab made of h-BN. We demonstrate that infrared spectra recorded at individual spatial positions within the unit cell of the vdW-PC can be associated with its band structure and local density of photonic states (LDOS). We thus introduce hyperspectral infrared nanoimaging as a tool for the comprehensive analysis of polaritonic crystals, which could find applications in the reconstruction of complex polaritonic dispersion surfaces in momentum-frequency space or for exploring exotic electromagnetic modes in topological photonic structures.

Planar refraction and lensing of highly confined polaritons in anisotropic media.

Refraction between isotropic media is characterized by light bending towards the normal to the boundary when passing from a low- to a high-refractive-index medium. However, refraction between anisotropic media is a more exotic phenomenon which remains barely investigated, particularly at the nanoscale. Here, we visualize and comprehensively study the general case of refraction of electromagnetic waves between two strongly anisotropic (hyperbolic) media, and we do it with the use of nanoscale-confined polaritons in a natural medium: α-MoO3. The refracted polaritons exhibit non-intuitive directions of propagation as they traverse planar nanoprisms, enabling to unveil an exotic optical effect: bending-free refraction. Furthermore, we develop an in-plane refractive hyperlens, yielding foci as small as λp/6, being λp the polariton wavelength (λ0/50 compared to the wavelength of free-space light). Our results set the grounds for planar nano-optics in strongly anisotropic media, with potential for effective control of the flow of energy at the nanoscale.

Enabling propagation of anisotropic polaritons along forbidden directions via a topological transition.

Polaritons with directional in-plane propagation and ultralow losses in van der Waals (vdW) crystals promise unprecedented manipulation of light at the nanoscale. However, these polaritons present a crucial limitation: their directional propagation is intrinsically determined by the crystal structure of the host material, imposing forbidden directions of propagation. Here, we demonstrate that directional polaritons (in-plane hyperbolic phonon polaritons) in a vdW crystal (α-phase molybdenum trioxide) can be directed along forbidden directions by inducing an optical topological transition, which emerges when the slab is placed on a substrate with a given negative permittivity (4H-silicon carbide). By visualizing the transition in real space, we observe exotic polaritonic states between mutually orthogonal hyperbolic regimes, which unveil the topological origin of the transition: a gap opening in the dispersion. This work provides insights into optical topological transitions in vdW crystals, which introduce a route to direct light at the nanoscale.

Giant optical anisotropy in transition metal dichalcogenides for next-generation photonics.

Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy has been recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This issue inspired an intensive search for giant optical anisotropy among natural and artificial materials. Here, we demonstrate that layered transition metal dichalcogenides (TMDCs) provide an answer to this quest owing to their fundamental differences between intralayer strong covalent bonding and weak interlayer van der Waals interaction. To do this, we made correlative far- and near-field characterizations validated by first-principle calculations that reveal a huge birefringence of 1.5 in the infrared and 3 in the visible light for MoS2. Our findings demonstrate that this remarkable anisotropy allows for tackling the diffraction limit enabling an avenue for on-chip next-generation photonics.

Launching of hyperbolic phonon-polaritons in h-BN slabs by resonant metal plasmonic antennas.

Launching and manipulation of polaritons in van der Waals materials offers novel opportunities for field-enhanced molecular spectroscopy and photodetection, among other applications. Particularly, the highly confined hyperbolic phonon polaritons (HPhPs) in h-BN slabs attract growing interest for their capability of guiding light at the nanoscale. An efficient coupling between free space photons and HPhPs is, however, hampered by their large momentum mismatch. Here, we show -by far-field infrared spectroscopy, infrared nanoimaging and numerical simulations- that resonant metallic antennas can efficiently launch HPhPs in thin h-BN slabs. Despite the strong hybridization of HPhPs in the h-BN slab and Fabry-Pérot plasmonic resonances in the metal antenna, the efficiency of launching propagating HPhPs in h-BN by resonant antennas exceeds significantly that of the non-resonant ones. Our results provide fundamental insights into the launching of HPhPs in thin polar slabs by resonant plasmonic antennas, which will be crucial for phonon-polariton based nanophotonic devices.

Deeply subwavelength phonon-polaritonic crystal made of a van der Waals material.

Photonic crystals (PCs) are periodically patterned dielectrics providing opportunities to shape and slow down the light for processing of optical signals, lasing and spontaneous emission control. Unit cells of conventional PCs are comparable to the wavelength of light and are not suitable for subwavelength scale applications. We engineer a nanoscale hole array in a van der Waals material (h-BN) supporting ultra-confined phonon polaritons (PhPs)-atomic lattice vibrations coupled to electromagnetic fields. Such a hole array represents a polaritonic crystal for mid-infrared frequencies having a unit cell volume of [Formula: see text] (with λ0 being the free-space wavelength), where PhPs form ultra-confined Bloch modes with a remarkably flat dispersion band. The latter leads to both angle- and polarization-independent sharp Bragg resonances, as verified by far-field spectroscopy and near-field optical microscopy. Our findings could lead to novel miniaturized angle- and polarization-independent infrared narrow-band couplers, absorbers and thermal emitters based on van der Waals materials and other thin polar materials.

Nanoimaging of resonating hyperbolic polaritons in linear boron nitride antennas.

Polaritons in layered materials-including van der Waals materials-exhibit hyperbolic dispersion and strong field confinement, which makes them highly attractive for applications including optical nanofocusing, sensing and control of spontaneous emission. Here we report a near-field study of polaritonic Fabry-Perot resonances in linear antennas made of a hyperbolic material. Specifically, we study hyperbolic phonon-polaritons in rectangular waveguide antennas made of hexagonal boron nitride (h-BN, a prototypical van der Waals crystal). Infrared nanospectroscopy and nanoimaging experiments reveal sharp resonances with large quality factors around 100, exhibiting atypical modal near-field patterns that have no analogue in conventional linear antennas. By performing a detailed mode analysis, we can assign the antenna resonances to a single waveguide mode originating from the hybridization of hyperbolic surface phonon-polaritons (Dyakonov polaritons) that propagate along the edges of the h-BN waveguide. Our work establishes the basis for the understanding and design of linear waveguides, resonators, sensors and metasurface elements based on hyperbolic materials and metamaterials.

Controlling graphene plasmons with resonant metal antennas and spatial conductivity patterns.

Graphene plasmons promise unique possibilities for controlling light in nanoscale devices and for merging optics with electronics. We developed a versatile platform technology based on resonant optical antennas and conductivity patterns for launching and control of propagating graphene plasmons, an essential step for the development of graphene plasmonic circuits. We launched and focused infrared graphene plasmons with geometrically tailored antennas and observed how they refracted when passing through a two-dimensional conductivity pattern, here a prism-shaped bilayer. To that end, we directly mapped the graphene plasmon wavefronts by means of an imaging method that will be useful in testing future design concepts for nanoscale graphene plasmonic circuits and devices.

Efficient coupling of light to graphene plasmons by compressing surface polaritons with tapered bulk materials.

Graphene plasmons promise exciting nanophotonic and optoelectronic applications. Owing to their extremely short wavelengths, however, the efficient coupling of photons to propagating graphene plasmons-critical for the development of future devices-can be challenging. Here, we propose and numerically demonstrate coupling between infrared photons and graphene plasmons by the compression of surface polaritons on tapered bulk slabs of both polar and doped semiconductor materials. Propagation of surface phonon polaritons (in SiC) and surface plasmon polaritons (in n-GaAs) along the tapered slabs compresses the polariton wavelengths from several micrometers to around 200 nm, which perfectly matches the wavelengths of graphene plasmons. The proposed coupling device allows for a 25% conversion of the incident energy into graphene plasmons and, therefore, could become an efficient route toward graphene plasmon circuitry.

Experimental verification of the spectral shift between near- and far-field peak intensities of plasmonic infrared nanoantennas.

Theory predicts a distinct spectral shift between the near- and far-field optical response of plasmonic antennas. Here we combine near-field optical microscopy and far-field spectroscopy of individual infrared-resonant nanoantennas to verify experimentally this spectral shift. Numerical calculations corroborate our experimental results. We furthermore discuss the implications of this effect in surface-enhanced infrared spectroscopy.

Resolving the electromagnetic mechanism of surface-enhanced light scattering at single hot spots.

Light scattering at nanoparticles and molecules can be dramatically enhanced in the 'hot spots' of optical antennas, where the incident light is highly concentrated. Although this effect is widely applied in surface-enhanced optical sensing, spectroscopy and microscopy, the underlying electromagnetic mechanism of the signal enhancement is challenging to trace experimentally. Here we study elastically scattered light from an individual object located in the well-defined hot spot of single antennas, as a new approach to resolve the role of the antenna in the scattering process. We provide experimental evidence that the intensity elastically scattered off the object scales with the fourth power of the local field enhancement provided by the antenna, and that the underlying electromagnetic mechanism is identical to the one commonly accepted in surface-enhanced Raman scattering. We also measure the phase shift of the scattered light, which provides a novel and unambiguous fingerprint of surface-enhanced light scattering.

Screening for Chagas' disease in HIV-positive immigrants from endemic areas.

Chagas' disease is an opportunistic infection in the setting of HIV/AIDS. The arrival of HIV-positive immigrants from endemic areas to non-endemic countries makes possible the detection of Chagas' disease in this group of patients. We describe the results of a screening programme conducted in the HIV-positive immigrant population arriving from endemic areas who attended the Tropical Medicine Unit of Hospital Universitario Central of Asturias during 2008. We determined anti-T. cruzi antibodies in all HIV patients arriving from endemic areas who were followed up. The ID-Chagas antibody test was used as a screening assay. The positive cases were confirmed with ELISA, IFAT and PCR. We analysed 19 HIV-positive immigrants, of which two (10·5%) had a positive antibody test for Chagas' disease confirmed. PCR was positive in both cases. There was no difference between the co-infected and the non-co-infected patients with respect to race, place of birth and residence, CD4+ cell count, and HIV viral load count. Direct microscopic examination of blood was negative in both positive cases. The positive patients were a man from Bolivia and woman from Paraguay. The overlap of HIV and T. cruzi infection occurs not only in endemic areas but also in non-endemic areas of North America and Europe where the diagnosis may be even more difficult due to low diagnostic suspicion. The implementation of screening programmes in this population group is needed for the early diagnostic of Chagas' disease.

Growth of Low-Density Vertical Quantum Dot Molecules with Control in Energy Emission.

In this work, we present results on the formation of vertical molecule structures formed by two vertically aligned InAs quantum dots (QD) in which a deliberate control of energy emission is achieved. The emission energy of the first layer of QD forming the molecule can be tuned by the deposition of controlled amounts of InAs at a nanohole template formed by GaAs droplet epitaxy. The QD of the second layer are formed directly on top of the buried ones by a strain-driven process. In this way, either symmetric or asymmetric vertically coupled structures can be obtained. As a characteristic when using a droplet epitaxy patterning process, the density of quantum dot molecules finally obtained is low enough (2 × 10(8) cm(-2)) to permit their integration as active elements in advanced photonic devices where spectroscopic studies at the single nanostructure level are required.

Site-controlled lateral arrangements of InAs quantum dots grown on GaAs(001) patterned substrates by atomic force microscopy local oxidation nanolithography.

In this work, we present a fabrication process that combines atomic force microscopy (AFM) local oxidation nanolithography and molecular beam epitaxy (MBE) growth techniques in order to control both the nucleation site and number of InAs quantum dots (QDs) inside different motifs printed on GaAs(001) substrates. We find that the presence of B-type slopes (As terminated) inside the pattern motifs is the main parameter for controlling the selectivity of the pattern for InAs growth. We demonstrate that either single InAs QDs or multiple InAs QDs in a lateral arrangement (LQDAs) can be obtained, with a precise control in their position and QD number, simply by varying the fabricated oxide length along the [110] direction.

Single photon emission from site-controlled InAs quantum dots grown on GaAs(001) patterned substrates.

We present a fabrication method to produce site-controlled and regularly spaced InAs/GaAs quantum dots for applications in quantum optical information devices. The high selectivity of our epitaxial regrowth procedure can be used to allocate the quantum dots only in positions predefined by ex-situ local oxidation atomic force nanolithography. The quantum dots obtained following this fabrication process present a high optical quality which we have evaluated by microphotoluminescence and photon correlation experiments.

Surface Localization of Buried III-V Semiconductor Nanostructures.

In this work, we study the top surface localization of InAs quantum dots once capped by a GaAs layer grown by molecular beam epitaxy. At the used growth conditions, the underneath nanostructures are revealed at the top surface as mounding features that match their density with independence of the cap layer thickness explored (from 25 to 100 nm). The correspondence between these mounds and the buried nanostructures is confirmed by posterior selective strain-driven formation of new nanostructures on top of them, when the distance between the buried and the superficial nanostructures is short enough (d = 25 nm).