Dentists' knowledge and preference regarding gingival displacement methods.

INTRODUCTION: An accurate impression is an essential procedure for fabricating indirect fixed restorations. To achieve a precise final impression, the management of gingival tissue is without doubt a crucial. AIM: To evaluate the use of different gingival displacement techniques among dental clinicians and to assess their associated knowledge and technique preferences. METHODS: A self-designed survey was created electronically and sent to a list of dentists. The survey was composed of multiple sections. Participants who stated that they do not use GD methods were asked to answer the survey questions based on their knowledge. Descriptive statistics were generated, andChi-square test was used to examine the association between the different variables. RESULTS: A total of 188 dentists participated in this study. The majority 144 (76.6%) use GD in their practice. When asked which technique yields a more accurate impression with lower incidence of repeating the impression, 93 (64.6%) reported retraction cord technique with a hemostatic agent results in a higher impression accuracy, while only 14 (9.7%) declared the retraction paste technique as being more accurate. CONCLUSION: The cordless GD technique is believed to be easier, faster, and less traumatic to the gingival tissues, nevertheless, the outcome of dental impressions is believed to be more predictable with the use of conventional retraction cords and hemostatic medicaments.

Impact of COVID-19 pandemic on dental education: online experience and practice expectations among dental students at the University of Jordan.

BACKGROUND: The quarantine associated with the COVID-19 pandemic forced dental schools to suspend their clinical training and to shift to distant learning methods. The aim of this study is to investigate the impact of quarantine on the self-perceived preparedness of dental graduates and to explore the efficacy of online education from students' perspectives. METHODS: The questionnaire distributed to dental students comprised of two main sections. The first part covered the online education experience, and the second part measured the level of self-perceived preparedness for a range of cognitive, communication and professional skills. RESULTS: The survey yielded a response rate of 72%. The majority of students (77%) agreed that they missed educational experiences as a result of the lockdown. More than half of them felt less motivated to follow-up with distant e-learning and believed that online assessment is not a good method for evaluation. A high percentage of the students (66%) thought that online group discussions had a positive value while 67% preferred online lectures compared to theatre lectures. Majority of students particularly 5th year (78.7%) (p < 0.001) stated that the quarantine increased their collaboration with their colleagues. According to 87% of students, the experience most negatively affected was their clinical training. In general, students showed satisfactory self-perceived preparedness related to a range of attributes and professional skills. CONCLUSIONS: The data showed that students partially appreciated the online system, whereas they did not consider it a substitute for face to face clinical practice. The overall self-perceived preparedness level was promising; however students had reservations regarding independent practice following graduation.

Survival of Cast Gold and Ceramic Onlays Placed in a School of Dentistry: A Retrospective Study.

PURPOSE: This study was done to compare the survival rates of cast gold and ceramic onlays placed in a dental school setting. MATERIAL AND METHODS: An electronic search was conducted in the patient records at Adams School of Dentistry, University of North Carolina at Chapel Hill for onlay codes that were in the database (From 1998 until 2018). Progress notes and radiographs were scrutinized to establish the survival time of the restorations. Any complications that occurred during the life time of the restorations were noted. The survival was summarized by categorization based on ranges of survival time in years; group 1: 1 to 5 years, group 2: 6 to 22 years. The mean survival time and standard deviation were calculated. One-way ANOVA was used to determine whether there was a statistically significant difference in the survival times between gold and ceramic onlays. RESULTS: The mean survival rate of cast gold onlays (86.6%) was comparable to that of ceramic onlays (81.1%). The gold onlays in Group 1 had a higher mean survival time (2.43 years) than the ceramic onlays (2.03 years). This difference was statistically significant (p = 0.002). The ceramic onlays in Group 2 had a mean survival time of 19.75 years while gold onlays had a mean survival time of 17.63 years. This difference was not statistically significant (p = 0.91). CONCLUSION: It was concluded that while the survival rate of ceramic onlays (81.1%) was inferior to that of cast gold onlays (86.6%), it was comparable.

The segmental impression technique: A straightforward solution to a difficult problem.

Trying to capture all the details of multiple teeth preparation in one impression is challenging. Techniques have been suggested to extend the working time of an impression material. This article describes a segmental impression technique to accurately capture all the preparation margins while allowing additional impression-making time.

Fracture load of two thicknesses of different zirconia types after fatiguing and thermocycling.

STATEMENT OF PROBLEM: A direct relationship has been reported between yttria concentration and translucency in zirconia restorations. However, increased yttria concentration also increases the cubic phase of the zirconia, which reduces its strength. The effect of increased yttria content on the fracture resistance of zirconia as a function of material thickness after fatigue testing requires evaluation. PURPOSE: The purpose of this in vitro study was to use the biaxial flexural test to evaluate the effect of yttria concentration on the mean fracture load (N) before and after fatiguing and thermocycling as a function of zirconia thickness. MATERIAL AND METHODS: Disk-shaped specimens of 5 mol% yttria partially stabilized zirconia (5Y-PSZ, BruxZir Anterior Solid Zirconia) and 3 mol% yttria partially stabilized zirconia (3Y-PSZ, BruxZir Shaded Zirconia) were prepared to thicknesses of 1.2 and 0.7 mm. For each thickness, the biaxial flexural test was used to measure the fracture load (N) before and after fatigue testing, with 1.2 million cycles at a 110-N load and simultaneous thermocycling at 5 °C to 55 °C (n=20). The data were analyzed by repeated-measures ANOVA (α=.05). RESULTS: Yttria concentration, thickness, and exposure to fatiguing had a statistically significant effect on the mean biaxial flexural load (yttria concentration: P<.001; thickness: P<.001; fatiguing: P=.004 for the 3Y-PSZ). One of the major findings in this study was that 30% of the 1.2-mm-thick 5Y-PSZ specimens and 80% of the 0.7-mm-thick 5Y-PSZ specimens fractured during fatiguing. All specimens of the 3Y-PSZ groups survived the fatiguing protocol. The 3Y-PSZ groups had statistically significant higher flexural loads than the 5Y-PSZ groups. The 1.2-mm thickness groups had statistically significant higher flexural loads than the 0.7-mm thickness groups. CONCLUSIONS: Yttria concentration had a significant effect on the strength of zirconia. 5Y-PSZ was considerably less resistant to fracture before and after fatigue testing than 3Y-PSZ. Decreasing the thickness of zirconia reduces its fracture resistance, regardless of the zirconia type.

Effect of masticatory simulation on the translucency of different types of dental zirconia.

STATEMENT OF PROBLEM: Translucent zirconia has been marketed to dentists seeking to provide esthetic monolithic dental restorations. Evidence on differences in translucency between recently introduced translucent zirconia and conventional zirconia before and after fatigue testing with thermocycling is lacking. PURPOSE: The purpose of this in vitro study was to evaluate the effect of fatiguing and thermocycling on the translucency of 5 mol% yttria partially stabilized zirconia (5Y-PSZ) and 3 mol% yttria partially stabilized zirconia (3Y-PSZ) at clinically relevant thicknesses. MATERIAL AND METHODS: Translucent zirconia (BruxZir Anterior Solid Zirconia [5Y-PSZ]) and conventional zirconia (BruxZir Shaded Zirconia [3Y-PSZ]) were evaluated. Disk-shaped specimens were prepared to 0.7-mm and 1.2-mm thicknesses for each zirconia type. Four groups (n=10/group) were evaluated. Translucency parameter (TP), contrast ratio (CR), and light blockage percentage (Lb%) were recorded by using an integrating sphere spectrophotometer before and after fatiguing (1.2 million cycles at 110-N load with simultaneous thermocycling at 5 °C to 55 °C). Data were analyzed by repeated-measures analysis of variance for statistical significance (α=.05). CR values were compared with the reported 0.06 translucency perception threshold of the human eye. RESULTS: A statistically significant difference was found in TP, CR, and Lb% between 5Y-PSZ and 3Y-PSZ (P<.001). Thickness had a statistically significant effect on TP, CR, and Lb% (P<.05). The 0.7-mm thickness groups were more translucent and had lower Lb% than the 1.2-mm thickness groups (P<.001). Baseline ranking from most to least translucent according to TP and CR measurements was as follows: 5Y-PSZ (0.7 mm), 3Y-PSZ (0.7 mm), 5Y-PSZ (1.2 mm), and 3Y-PSZ (1.2 mm). Lb% was 64% at the 1.2-mm and 56% at the 0.7-mm thickness in the 3Y-PSZ groups. Lb% was 61% at the 1.2-mm and 53% at the 0.7-mm thickness in the 5Y-PSZ groups. None of the groups, before and after fatiguing, had a CR value exceeding the clinically perceivable 0.06 translucency perception threshold value. CONCLUSIONS: Translucent (5Y-PSZ) and conventional (3Y-PSZ) zirconias evaluated in this study displayed degrees of translucency that were inversely related to the zirconia thickness. 5Y-PSZ was more translucent and blocked less light than 3Y-PSZ, but this difference may not be perceivable to the human eye. Both 5Y-PSZ and 3Y-PSZ were optically stable after fatiguing and thermocycling.

Five-year success rate of resin-bonded fixed partial dentures: A systematic review.

OBJECTIVES: To assess and compare the 5-year success rate of resin-bonded fixed partial dentures (RBFPDs) fabricated from different materials. METHODS: An electronic search on 3 databases from January 1965 to March of 2017 was done for human randomized clinical trials (RCTs), and prospective and retrospective cohort studies. The key words used in the search were: Bridge OR bridges OR fixed partial OR fixed dental AND resin bonded OR Maryland OR ceramic bonded. Quality assessment was done using the Newcastle-Ottawa scale. Success was defined as the RBFPDs remaining in situ and not having experienced debonding, biological failures, or mechanical failures at the examination visit. RESULTS: Meta analyses of the included studies showed an estimated 5-year success rate of 88.18% for the metal framework RBFPDs and 84.41% for the nonmetal framework RBFPDs. The estimated 5-year success rate for each nonmetal material category was 92.07% for zirconia, 94.26% for In-Ceram alumina, and 84.83% for fiber-reinforced composite. The failure rate was not statistically significant among the single, double, and multiple retainers RBFPDs (P > .05). Technical complications were the main reason for failures. CONCLUSION: The 5-year clinical performance of RBFPDs is similar to the performance of conventional fixed partial dentures (FPDs) and implant-supported crowns. CLINICAL SIGNIFICANCE: Clinicians should consider using RBFPDs more often because their clinical performance is similar to the performance of conventional FPDs and implant-supported crowns.