New Method Based on the Direct Analysis in Real Time Coupled with Time-of-Flight Mass Spectrometry to Investigate the Thermal Depolymerization of Poly(methyl methacrylate).

In this work, the isothermal decomposition of poly(methyl methacrylate) synthesized in bulk by the radical route of methyl methacrylate in the presence of azobisisobutyronitrile as the initiator was carried out and monitored for the first time with the DART-Tof-MS technique at different temperatures. Nuclear magnetic resonance (NMR) analysis revealed a predominantly atactic microstructure, and size-exclusion chromatography (SEC) analysis indicated a number average molecular weight of 3 × 105 g·mol-1 and a polydispersity index of 2.47 for this polymer. Non-isothermal decomposition of this polymer carried out with thermogravimetry analysis (TGA) showed that the weight loss process occurs in two steps. The first one starts at approximately 224 °C and the second at 320 °C. The isothermal decomposition of this polymer carried out and monitored with the DART-Tof-MS method revealed only one stage of weight loss in this process, which begins at approximately 250 °C, not far from that of the second step observed in the case of the non-isothermal process conducted with the TGA method. The results obtained with the MS part of this technique revealed that the isothermal decomposition of this polymer regenerates a significant part of methyl methacrylate monomer, which increases with temperature. This process involves radical chain reactions leading to homolytic chain scissions and leading to the formation of secondary and tertiary alkyl radicals, mainly regenerating methyl methacrylate monomer through an unzipping rearrangement. Although they are in the minority, other fragments, such as the isomers of 2-methyl carboxyl, 4-methyl, penta-2,4-diene and dimethyl carbate, are also among the products detected. At 200 °C, no trace of monomer was observed, which coincides with the first step of the weight loss observed in the TGA. These compounds are different to those reported by other researchers using TGA coupled with mass spectrometry in which methyl isobutyrate, traces of methyl pyruvate and 2,3-butanonedione were detected.

Determination of phthalates in bottled waters using solid-phase microextraction and gas chromatography tandem mass spectrometry.

Phthalates are synthetic chemicals widely used, mainly as plasticizers, which are ubiquitous and recognized as endocrine-disrupting chemicals. For investigation of phthalate residues leached from PET bottles into drinking water, a simple and sensitive method was developed, validated and applied to a series of real samples. Solid-phase microextraction (SPME) was used in direct immersion mode for concentration of phthalate traces from 10 mL of each water sample. Four commercially available SPME fibers were tested and compared, while six dialkyl phthalates were investigated: dimethyl phthalate (DMP), diethyl phthalate (DEP), diisopropyl phthalate (DiPP), diisobutyl phthalate (DiBP), di-n-butyl phthalate (DnBP) and di-ethylhexyl phthalate (DEHP). The extracted phthalic acid esters were separated and quantified by gas chromatography hyphenated with tandem mass spectrometry (GC-MS/MS) and a detection method based on multiple reaction monitoring (MRM) mode was fully developed, optimized and validated. The fiber which showed the highest ability for extraction of phthalates was DVB/CAR/PDMS which combines a liquid polymeric coating (polydimethyl siloxane and divinylbenzene) with a carboxen porous sorbent layer. The obtained limit of detection was in the range between 0.3 and 2.6 ng mL-1. Thus, this fiber was used for extraction of phthalates from twelve commercial PET bottled water samples. All investigated water brands showed the presence of two to six phthalates at concentrations between 6.3 and 112.2 ng mL-1. The highest level was observed for DnBP, followed by DEHP, DiBP, DMP, DEP and DiPP.

New Method Based on Direct Analysis in Real-Time Coupled with Time-of-Flight Mass Spectrometry (DART-ToF-MS) for Investigation of the Miscibility of Polymer Blends.

The miscibility of a series of binary blends such as polystyrene/poly(methyl methacrylate) (PS/PMMA), polystyrene/poly(vinyl chloride)(PS/PVC), poly(vinyl chloride)/poly(polymethyl methacrylate)(PVC/PMMA) and poly(ethylene-co-vinyl alcohol)/poly(lactide-co-glycolide acid) PEVAL/PLGA with equal ratios and poly(ethylene oxide)/poly(hydroxyl propyl methyl cellulose) (PEO/PHPMC) containing 30 and 70 wt% PEO, which were randomly chosen among the widely systems reported in the literature, was investigated by a new method based on a direct analysis in real-time coupled with time-of-flight mass spectrometry (DART-ToF-MS). To reach this goal these pairs of polymers and copolymers were prepared by solvent casting method. As a first step, the DSC technique was undertaken in this work to highlight the published results on the miscibility of these binary systems. The thermogravimetry analysis (TGA) was used to define the optimum decomposition temperature of these blends programmed for the study of miscibility using the DART-ToF-MS technique. The results obtained by this method based on the comparison of the nature of the fragments resulting from the isothermal decomposition of the blend with those of their pure components have been very effective in demonstrating the character of miscibility of these systems. Indeed, it was found that the PS/PMMA-50 and PS/PVC-50 blends were immiscible, PVC/PMMA-50 and PEVAL/PLGA-50 miscible, and the PEO/PHMC partially miscible. This method, which is rapid and uses a very small amount of sample (1-2 mg) can be extended in its application to other blends whose other methods used have shown their limits due to the intrinsic properties of the polymers involved.