Impact of Auxiliary Features on Retention of Short Dental Crowns: An In-Vitro Analysis of Box and Groove Preparations.

BACKGROUND Several auxiliary features have been proposed to achieve sustainable retention for short-prepared dental crowns; however, achieving retention is challenging. This study aimed to assess the impact of increased total occlusal convergence and auxiliary preparation factors like box and groove on the retention form of short tooth preparations. MATERIAL AND METHODS Eighty resin machine-milled dies with a height of 3 mm and a deep chamfer margin of 1 mm were prepared to mimic the short-prepared molar. Initially, 2 teeth were prepared following the guidelines, and the total occlusal convergence was kept at 10° and 20°, respectively. Auxiliary features such as the proximal box and buccal groove were prepared on separate 20° dies. Eighty dies were prepared with 10 samples each for 10°, 20°, 20° with proximal box and 20° with buccal groove for zirconia (n=40) and metal crowns (n=40). Cementation was done with glass ionomer luting cement, and a pull-off test was conducted. Data were analyzed using one-way analysis of variance and post hoc fisher least significant difference test (P<0.05). RESULTS The highest mean was observed in the proximal box group with the metal crown (14.59), and the lowest in the group with 20° zirconia crowns (9.12). Within groups, the highest retentive values were found for the 20° taper with proximal box preparation; the lowest was for the 20° taper group. CONCLUSIONS Within the study limitations, it could be concluded that incorporating a proximal box or buccal groove in short tooth preparations with an increased total occlusal convergence improved retentive values.

Influence of Chairside Simulated Adjustment (Finishing and Polishing) Protocol and Chlorhexidine Mouthwash Immersion on Color Stability and Translucency of 2 and 3 Preshaded Multilayered Monolithic Zirconia.

BACKGROUND Preshaded monolithic zirconia (MLZ) is reported to have high translucency. This study aimed to assess the effect of chlorhexidine gluconate (ChG) mouthwash on color and translucency parameter (TP) of 2 different preshaded MLZ dental ceramics after clinical adjustment. MATERIAL AND METHODS Two MLZ disk-shaped specimens [NPM (Nacera Pearl Multi-Shade) (n=72) and CZM (Ceramill Zolid FX Multilayer)] (n=72) were simulated for clinical adjustment, finished, and polished using 2 adjustment kits [recommended kit, third-party kit: Diasynt Plus and SUN (n=12 each)] and later immersed in ChG mouthwash (Avohex) for 2 weeks. Difference in color (ΔE) and TP (Y) were calculated using the CIELab formula after measuring the coordinates (Lab) with a colorimeter. Individual changes in color and TP were assessed on the Clinical acceptance (perceptible) threshold (CAT/CPT) and Translucency perception threshold (TPT), respectively. Differences between the 2 ceramics were assessed using one-way ANOVA and post hoc tests, with all differences considered significant at P<0.05. RESULTS NPM and CZM differed in color at baseline despite having the same Vita shade combination. Between the 2 preshaded MLZ ceramics, NPM showed significant changes in color when adjusted with a third-party kit. Chlorhexidine produced changes in color and TP that were designated as clinically perceptible (ΔE=1.0 to 3.3) on the CAT/CPT and TPT scales, irrespective of the adjustment kit used. ChG produced the least or no changes in glazed MLZ specimens. CONCLUSIONS ChG mouthwash, whenever prescribed for preshaded MLZ restoration, should be adjusted prior to final glazing to avoid clinical adjustments that adversely affects color and translucency of the restoration.

Evaluation of the Milled and Three-Dimensional Digital Manufacturing, 10-Degree and 20-Degree Preparation Taper, Groove and Box Auxiliary Retentive Features, and Conventional and Resin-Based Provisional Cement Type on the Adhesive Failure Stress of 3 mm Short Provisional Crowns.

BACKGROUND This study evaluated the effects of milling (CADCAM), 3D printing, preparation taper angles (10-degree and 20-degree), auxiliary retentive features (groove and box), and provisional cement types (conventional and resin-based) on the adhesive failure stress of 3-mm short provisional crowns (PC). The research was motivated by the need to understand how digital dentistry technologies impact the retention and durability of provisional crowns. MATERIAL AND METHODS A total of 160 working models (3D-printed) and PCs [80 milled (CopraTemp)/80 printed (Asiga)] were fabricated from two 10- and 20-degree typodont master models and two 20-degree 3D-printed master models (groove and box), simulating a 3 mm high all-ceramic short PC. After provisional cementation with conventional (Kerr TempBond) and resin-based (ProviTemp) cements, 16 subgroups (n=10 each) underwent thermocycling (10 000 cycles; 5-55°C) and pull-off tests on a universal testing machine. Statistical analysis was performed using one-way ANOVA and post hoc Tukey test. RESULTS Conventional cement failed at lower stress for milled (47.68 to 73.54) and printed (48.40 to 77.91) as compared to resin cement for milled (104.2 to 137.27) and printed (184.85 to 328.84), respectively, with significant differences. Increased taper and groove decreased failure load except for the printed PC/resin cement combination. Use of proximal box preparation increased retention significantly. Except for 20-degree taper cemented with conventional cement, the differences in auxiliary retentive features for milled and printed provisional crowns were statistically significant at P≤0.05. CONCLUSIONS 3D-printed PC, resin-based cement, 10-degree taper, and proximal box preparation were associated with higher retention than milled, conventional cements, 20-degree taper, and vertical groove.

Micro-CT analysis of 3D printed provisional crowns fitting.

BACKGROUND: The provisional crowns (PR) play an important role during the course of fixed prosthesis treatment. The fitting of PR varies and depends on various factors. OBJECTIVE: The aim of the study was to evaluate the marginal and internal fit of PR produced by three-dimensional (3D) printing technique and to compare those with PR made by the milling technique by using micro computed tomography (µCT) on three commonly used finish line designs. METHOD: Ninety study models were made using metal die of #14 tooth (i.e. maxillary 1st premolar molar) prepared for full veneer crown with three different finish line chamfer (C), rounded shoulder (RS) and rounded shoulder with bevel (RSB). PR was fabricated on each study model, using milling (MiL group, n= 45), and 3D printing technique (3D-P group, n= 45). Marginal and internal fit of each study model was measured by micro computed tomography, at 7 Zones Pr-1- Pr-7 on each finish line. Recorded data were statistically analysed by one-way analysis of variance (ANOVA) and using Dunnett t-Test (p> 0.05). RESULTS: The mean gap at margins was minimum for provisional crowns in 3D-P group in any finish line with minimum in rounded shoulder with bevel at zone Pr-1 30.9 ± 5.3 and at zone Pr-7 32.7 ± 5.3. In the axial region, i.e. zone Pr-2, the smallest gap was recorded in the 3D-P group and in the occlusal region, for zone Pr-3, 4 and 5, the maximum gap was recorded in the MiL group. CONCLUSION: The provisional crowns fabricated by 3D printed technique have better marginal and internal fit than the provisional crowns made by milling technique.

Comparison of Microleakage in Nanocomposite and Amalgam as a Crown Foundation Material Luted with Different Luting Cements under CAD-CAM Milled Metal Crowns: An In Vitro Microscopic Study.

Microleakage is a persistent problem despite advancement in materials and techniques in fixed prosthodontics. This leads to the importance of sound crown foundation material and luting agents used to maintain the marginal seal. The literature is deficient with studies, comparing microleakage under various crown foundation materials and luting agents, especially with CAD-CAM (computer-aided design and computer-aided manufacturing) metal crowns. This study was aimed to compare microleakage in a nanocomposite/dentinal bonding agent and amalgam/cavity varnish as crown foundation materials luted with two different luting cements: resin-reinforced glass ionomer cement and self-adhesive resin cement, under both dry and contaminated conditions. A hundred intact, caries-free human molars were prepared to receive crown foundation material and extra coronal restorations. Amalgams with cavity varnish and nanocomposites with dentinal bonding agent in both ideal and contaminated conditions were used as crown foundation materials. After restoration, each sample was cemented with a CAD-CAM milled metal crown using two different luting agents-resin-reinforced glass ionomer cement and self-adhesive resin cements both in ideal and contaminated conditions. Cementation was followed by thermocycling of samples, immersion in erythrosine B dye, embedding in clear auto polymerizing acrylic resin and sectioning to evaluate microleakage using stereomicroscope. The mean microleakage between different luting cements on the experimental side of the facial surface was 137.64 µm and 211.01 µm for resin-reinforced GIC and for self-adhesive resin cement was 119.78 µm and 150.42 µm, under ideal and contaminated condition, respectively. There was a significant difference in mean micro-leakage between different crown foundation material and cement groups used in the study. The composites and amalgam, both when used as crown foundation material and luted with use of technically advanced CAD-CAM metal crown with self-adhesive resin cement (in both ideal or contaminated condition), showed less microleakage than in resin-reinforced glass ionomer cement. Overall, the self-adhesive resin cement showed comparatively reduced microleakage in all combinations with different crown foundations. Thus, this combination can be used in daily clinical practice to provide better protection from further decay.

Novel CAD-CAM zirconia coping design to enhance the aesthetics and strength for anterior PLZ crowns.

BACKGROUND: The aesthetics and strength of anterior porcelain layered zirconia (PLZ) crowns are mainly affected by the zirconia (Zr) coping design. There is a need for a modified design to enhance aesthetics with strength. OBJECTIVES: The purpose of this study was to compare the fracture resistance of anterior PLZ crowns having modified CAD-CAM Zr coping designs (in terms of thickness and marginal collar designs) with standard Zr copings. METHODS: Fifty PLZ crowns were fabricated and divided into two groups: Gr 1: Standard Zr Coping (SZC) (control gr) with 0.5 mm thickness (Facial-F, Mesial-M, Distal-D, incisal-I, and Palatal-P) without a collar; Gr 2: Collar Zr Coping (CZC) (test gr) with 2.5 mm collar height on M, D, P and 0.2 mm F and variable facial wall thickness. Subgroups: Gr 2a: (CZC-0.5 mm) facial wall thickness 0.5 mm; Gr 2b: (CZC-0.4 mm) facial wall thickness 0.4 mm; Gr 2c: (CZC-0.3 mm) facial wall thickness 0.3 mm; Gr 2d: (CZC-0.2 mm) facial wall thickness 0.2 mm. The fracture load was determined and analysed using One-way ANOVA and Dunnet test. RESULTS: The minimum fracture load was 927.36 ± 127.80 N observed for Gr 2c (CZC at 0.3 mm) while the maximum fracture load was 1373.61 ± 146.54 N observed for Gr 2a (CZC at 0.5 mm). A highly significant difference in mean fracture load among various Zr coping groups (p< 0.001) was determined. CONCLUSIONS: Novel Zr coping design for anterior PLZ crowns can provide better aesthetics with strength. Reducing the thickness of Zr coping in the aesthetic zone to 0.2 mm and providing a modified collar design (2.5 mm collar height on M, D, P, and 0.2 mm F) would provide strength without jeopardizing aesthetics.

Restoring the Esthetics for a Cleft Palate Patient by Using Modified Preparation and Pink Porcelain.

AIM: This report describes the challenges experienced in a unique case involving dental esthetics, and the treatment provided to achieve satisfactory conservative treatment. BACKGROUND: Even minor aspects of dental esthetics can significantly affect a patient's quality of life. Moreover, the patient's level of satisfaction with rehabilitative dentition and prosthetics affects oral health, daily living, and dental perceptions. It is not unusual for clinicians to encounter cases with complex esthetics that have affected the patient's life. Such cases need careful treatment planning to meet the patient's expectations. Conservative treatment should be the clinician's goal, because complex treatment may result in negative outcomes. CASE DESCRIPTION: Here, the patient exhibited severe bone loss due to cleft palate, as well as improper positioning of the teeth. He could not be treated with implants because of poor bone quality and quantity. Orthodontic treatment was performed, but did not improve the outcome. A wax-up was made for each of the three possible options, and then transferred to the patient's mouth by making a mock-up. This allowed the patient to clearly understand the results of each option. After selecting an option, we performed the procedure on the cast before it was undertaken in the patient's mouth. This helped us to precisely determine the preparation needed for all teeth. Teeth were saved where possible to preserve the remaining bone. The lost bone was replaced with pink porcelain. Treatment was conservative and the results were optimal for the patient and our clinical team. CONCLUSION: In some cases, clinicians may have few options available to achieve satisfactory results. However, the use of appropriate diagnostic tools, data collection, and conservative treatment procedures can help achieve these goals. CLINICAL SIGNIFICANCE: Fabrication of wax-ups and mock-ups can help the clinician and patient predict the results of dental treatment and ensure a conservative procedure.

Management of post-treatment exacerbated temperomandibular disorder.

The patient returning to the clinic with a restricted mouth opening after dental treatment is common in dental practice. An extended, wide mouth opening during the dental treatment is known to exacerbate the underlying temperomandibular disorders (TMDs). Subclinical TMD is prevalent among a large number of people in the society. It is advisable in the interest of patients as well as the treating dentist for routine examination of temperomandibular joint and recording TMD history before initiating dental treatment. Adequate knowledge and skill of the dentist is required to identify the causative factors and initiate appropriate treatment. This case report explains the stabilising occlusal splint therapy to treat the restricted mouth opening in chronic centrally mediated myalgia flared up due to extended dental treatment.