Evaluation of an antibacterial orthodontic adhesive incorporated with niobium-based bioglass: an in situ study.

This in situ study aimed to evaluate the antibacterial and anti-demineralization effects of an experimental orthodontic adhesive containing triazine and niobium phosphate bioglass (TAT) around brackets bonded to enamel surfaces. Sixteen volunteers were selected to use intra-oral devices with six metallic brackets bonded to enamel blocks. The experimental orthodontic adhesives were composed by 75% BisGMA and 25% TEGDMA containing 0% TAT and 20% TAT. Transbond XT adhesive (TXT) was used as a control group. Ten volunteers, mean age of 29 years, were included in the study. The six blocks of each volunteer were detached from the appliance after 7 and 14 days to evaluate mineral loss and bacterial growth including total bacteria, total Streptococci, Streptococci mutans, and Lactobacilli. Statistical analysis was performed using GLM model - univariate analysis of variance for microhardness and 2-way ANOVA for bacterial growth (p<0.05). The 20% TAT adhesive caused no difference between distances from bracket and the sound zone at 10-µm deep after 7 and 14 days. After 14 days, higher mineral loss was shown around brackets at 10- to 30-µm deep for TXT and 0% TAT adhesives compared to 20% TAT. S. mutans growth was inhibited by 20% TAT adhesive at 14 days. Adhesive with 20% TAT showed lower S. mutans and total Streptococci growth than 0% TAT and TXT adhesives. The findings of this study show that the adhesive incorporated by triazine and niobium phosphate bioglass had an anti-demineralization effect while inhibiting S. mutans and total Streptococci growth. The use of this product may inhibit mineral loss of enamel, preventing the formation of white spot lesions.

Evaluation of an antibacterial orthodontic adhesive incorporated with niobium-based bioglass: an in situ study

Abstract This in situ study aimed to evaluate the antibacterial and anti-demineralization effects of an experimental orthodontic adhesive containing triazine and niobium phosphate bioglass (TAT) around brackets bonded to enamel surfaces. Sixteen volunteers were selected to use intra-oral devices with six metallic brackets bonded to enamel blocks. The experimental orthodontic adhesives were composed by 75% BisGMA and 25% TEGDMA containing 0% TAT and 20% TAT. Transbond XT adhesive (TXT) was used as a control group. Ten volunteers, mean age of 29 years, were included in the study. The six blocks of each volunteer were detached from the appliance after 7 and 14 days to evaluate mineral loss and bacterial growth including total bacteria, total Streptococci, Streptococci mutans, and Lactobacilli. Statistical analysis was performed using GLM model - univariate analysis of variance for microhardness and 2-way ANOVA for bacterial growth (p<0.05). The 20% TAT adhesive caused no difference between distances from bracket and the sound zone at 10-µm deep after 7 and 14 days. After 14 days, higher mineral loss was shown around brackets at 10- to 30-µm deep for TXT and 0% TAT adhesives compared to 20% TAT. S. mutans growth was inhibited by 20% TAT adhesive at 14 days. Adhesive with 20% TAT showed lower S. mutans and total Streptococci growth than 0% TAT and TXT adhesives. The findings of this study show that the adhesive incorporated by triazine and niobium phosphate bioglass had an anti-demineralization effect while inhibiting S. mutans and total Streptococci growth. The use of this product may inhibit mineral loss of enamel, preventing the formation of white spot lesions.

In vitro antibacterial and remineralizing effect of adhesive containing triazine and niobium pentoxide phosphate inverted glass.

OBJECTIVES: White spot lesions are still a concern for orthodontic patients. The objective of this study was to assess the remineralizing and antibacterial effect of a newly developed orthodontic adhesive. METHODS: The compounds 1,3,5-tryacryloylhexahydro-1,3,5-triazine (TAT) and phosphate invert glass containing 10 mol% of niobium pentoxide (PIG-Nb) were added at 20 and 5 wt%, respectively, to an experimental adhesive (75 wt% BisGMA, 25 wt% TEGDMA, 5 wt% fummed silica, and photo-initiator system), called TPN. A group without the addition of these compounds was used as Control and the orthodontic adhesive Transbond XT (TXT) was used for comparison. Antibacterial activity was evaluated through surface biofilm formation, mineral deposition, and degree of conversion (DC) through Raman microscopy, Knoop hardness after softening in solvent, and bracket dislodgement (BD). RESULTS: TPN group presented a reduction in bacterial growth when compared to Control and TXT. Mineral deposits were observed on the surface of TPN adhesive after 14 and 28 days of immersion in artificial saliva. There was an increase in DC after 28 days, whereas TPN group presented the highest DC. All groups underwent some degree of softening. No significant changes were observed in BD after 28 days of immersion in artificial saliva. CONCLUSION: The newly developed orthodontic adhesive, with addition of 20 wt% TAT and 5w% PIG-Nb, exhibited antibacterial activity and was capable to induce mineral deposition on its surface in vitro. CLINICAL SIGNIFICANCE: The orthodontic adhesive developed in this study with antibacterial activity and mineral deposition could be a reliable choice for brackets adhesion.

Orthodontic bracket bonding without previous adhesive priming: A meta-regression analysis.

OBJECTIVE: To determine the consensus among studies that adhesive resin application improves the bond strength of orthodontic brackets and the association of methodological variables on the influence of bond strength outcome. MATERIALS AND METHODS: In vitro studies were selected to answer whether adhesive resin application increases the immediate shear bond strength of metal orthodontic brackets bonded with a photo-cured orthodontic adhesive. Studies included were those comparing a group having adhesive resin to a group without adhesive resin with the primary outcome measurement shear bond strength in MPa. A systematic electronic search was performed in PubMed and Scopus databases. RESULTS: Nine studies were included in the analysis. Based on the pooled data and due to a high heterogeneity among studies (I(2)  =  93.3), a meta-regression analysis was conducted. The analysis demonstrated that five experimental conditions explained 86.1% of heterogeneity and four of them had significantly affected in vitro shear bond testing. The shear bond strength of metal brackets was not significantly affected when bonded with adhesive resin, when compared to those without adhesive resin. CONCLUSIONS: The adhesive resin application can be set aside during metal bracket bonding to enamel regardless of the type of orthodontic adhesive used.

Influence of Eugenol-based Sealers on Push-out Bond Strength of Fiber Post Luted with Resin Cement: Systematic Review and Meta-analysis.

INTRODUCTION: It is unclear in the literature if the presence of eugenol in root dentin impairs the retention of a fiber post luted with resin cements. The aim of this study was to systematically review the literature and perform meta-analysis on the influence of eugenol on the bond strength of posts luted to root canals. METHODS: A systematic electronic search was performed in PubMed, Scopus, Lilacs, and Web of Science databases. No language or publication date restrictions were applied. Eligible studies were those that assessed the immediate push-out bond strength of posts cemented to root dentin after the removal of eugenol-based sealer and compared it with a eugenol-free group. RESULTS: Thirteen studies met the inclusion criteria although 2 were excluded after full-text reading and 1 study was identified by cross-reference. Nine studies were included in the meta-analysis. Global analysis showed a significant influence of eugenol, which lowered the bond strength of fiber posts cemented to root canals (P < .001). The subgroup analysis carried out related to the different types of hybridization processes also indicated a negative effect of eugenol on bond strength in all subgroups assessed (P < .001). CONCLUSIONS: Eugenol-based sealer reduces the immediate push-out bond strength of fiber posts luted to root canal with resin cement, regardless of the type of adhesive system or resin cement used.

Effect of methacrylated-based antibacterial monomer on orthodontic adhesive system properties.

INTRODUCTION: Antibacterial adhesives were developed to reduce the incidence of white spot lesions in orthodontic patients. Compounds that contain triazine are known as effective antibacterial agents. The aims of this study were to develop an experimental orthodontic adhesive containing 1,3,5-triacryloylhexahydro-1,3,5-triazine (TAT) and to characterize it. METHODS: TAT was added in 3 concentrations (10%, 15%, and 20%) to the experimental orthodontic adhesive. Antibacterial activity was assayed by brain-heart infusion broth dilution against Streptococcus mutans. The degree of conversion was measured using Fourier transform infrared spectroscopy, and solvent degradation was evaluated by Knoop microhardness before and after immersion in ethanol for 2 hours. The shear bond strength of metal brackets bonded to bovine enamel surface was assessed. RESULTS: All experimental adhesives reduced bacterial growth. The addition of 15% and 20% TAT increased the degree of conversion compared with the control group (0%) and the 10% group. All groups showed a decrease in hardness after ethanol immersion, and there was also a decrease in the percentage of variation of Knoop hardness in the experimental adhesives containing TAT, whereas the shear bond strength increased. CONCLUSIONS: Orthodontic adhesives containing TAT are promising antibacterial materials, especially those with 15% and 20% TAT.