Use of Cold Atmospheric Plasma To Preserve the Quality of White Shrimp (Litopenaeus vannamei).

HIGHLIGHTS: Discharge of dielectric barriers significantly reduced microbial populations. Treatments resulted in improvement in physical characteristics during storage. Nonthermal plasma provided a 43% (4-day) increase in sample lifetime.

Titanium Surface Chemical Composition Interferes in the Pseudomonas aeruginosa Biofilm Formation.

Bacterial adhesion on three different surfaces: untreated Ti, plasma nitriding, and plasma carbonitriding Ti substrates were investigated. The samples were placed in bacterial cultures of Pseudomonas aeruginosa to assess biofilm formation. The correlation between the amount of bacteria attached to the surface after a lapse of time with nanotopography and physicochemical properties was performed. TiN showed the highest capacity to avoid bacterial adhesion, while presenting intermediate roughness and wettability. Although the surface of TiCN had the highest surface roughness and low contact angle (high wettability), bacterial adhesion was intermediate on this sample. Untreated Ti, even though presenting a smooth surface and low wettability, had the highest tendency to form biofilms.

MC3T3-E1 Cells Behavior on Surfaces Bombarded by Argon Ions in Planar Cathode Discharge.

To evaluate the effect of topography in nanoscale, titanium surfaces were bombarded by argon ions (a chemically inert gas), in an atmosphere of plasma. The effects of surface parameters on morphology, adhesion, proliferation, and MC3T3-E1 preosteoblasts differentiation were analyzed. Nontreated (smooth) surfaces were used as a control. The levels of average roughness (Ra) observed in bombarded and smooth titanium surfaces were of 95 and 14 nm, respectively. The wettability increased on treated surfaces. The number of attached cells (30 and 60 min) was significantly higher on the bombarded surface. The cell proliferation after 3 and 7 days was also significantly higher on the ion-bombarded surface. In addition, the ALP activity and expression of osteocalcin were higher in cells grown on the treated surface. The results showed that bombardment with argon ions increased the roughness and the wettability of the Ti surface, promoting a significant increase in the adhesion, proliferation, and differentiation of preosteoblasts.

Bone tissue response to plasma-nitrided titanium implant surfaces.

A current goal of dental implant research is the development of titanium (Ti) surfaces to improve osseointegration. Plasma nitriding treatments generate surfaces that favor osteoblast differentiation, a key event to the process of osteogenesis. Based on this, it is possible to hypothesize that plasma-nitrided Ti implants may positively impact osseointegration. Objective The aim of this study was to evaluate the in vivo bone response to Ti surfaces modified by plasma-nitriding treatments. Material and Methods Surface treatments consisted of 20% N2 and 80% H2, 450°C and 1.5 mbar during 1 h for planar and 3 h for hollow cathode. Untreated surface was used as control. Ten implants of each surface were placed into rabbit tibiae and 6 weeks post-implantation they were harvested for histological and histomorphometric analyses. Results Bone formation was observed in contact with all implants without statistically significant differences among the evaluated surfaces in terms of bone-to-implant contact, bone area between threads, and bone area within the mirror area. Conclusion Our results indicate that plasma nitriding treatments generate Ti implants that induce similar bone response to the untreated ones. Thus, as these treatments improve the physico-chemical properties of Ti without affecting its biocompatibility, they could be combined with modifications that favor bone formation in order to develop new implant surfaces.

The effect of plasma-nitrided titanium surfaces on osteoblastic cell adhesion, proliferation, and differentiation.

In this study, we evaluated the effect of new plasma-nitrided Ti surfaces on the progression of osteoblast cultures, including cell adhesion, proliferation and differentiation. Ti surfaces were treated using two plasma-nitriding protocols, hollow cathode for 3 h (HC 3 h) and 1 h (HC 1 h) and planar for 1 h. Untreated Ti surfaces were used as control. Cells derived from human alveolar and rat calvarial bones were cultured on Ti surfaces for periods of up to 14 days and the following parameters were evaluated: cell morphology, adhesion, spreading and proliferation, alkaline phosphatase (ALP) activity, extracellular matrix mineralization, and gene expression of key osteoblast markers. Plasma-nitriding treatments resulted in Ti surfaces with distinct physicochemical characteristics. The cell adhesion and ALP activity were higher on plasma-nitrided Ti surfaces compared with untreated one, whereas cell proliferation and extracellular matrix mineralization were not affected by the treatments. In addition, the plasma-nitrided Ti surfaces increased the ALP, reduced the osteocalcin and did not affect the Runx2 gene expression. We have shown that HC 3 h and planar Ti surfaces slightly favored the osteoblast differentiation process, and then these surfaces should be considered for further investigation using preclinical models.

Inhibition of microbial growth on chitosan membranes by plasma treatment.

The use of polymeric medical devices has stimulated the development of new sterilization methods. The traditional techniques rely on ethylene oxide, but there are many questions concerning the carcinogenic properties of the ethylene oxide residues adsorbed on the materials after processing. Another common technique is the gamma irradiation process, but it is costly, its safe operation requires an isolated site, and it also affects the bulk properties of the polymers. The use of gas plasma is an elegant alternative sterilization technique. The plasma promotes efficient inactivation of the microorganisms, minimizes damage to the materials, and presents very little danger for personnel and the environment. In this study we used plasma for microbial inhibition of chitosan membranes. The membranes were treated with oxygen, methane, or argon plasma for different time periods (15, 30, 45, or 60 min). For inhibition of microbial growth with oxygen plasma, the time needed was 60 min. For the methane plasma, samples were successfully treated after 30, 45, and 60 min. For argon plasma, all treatment periods were effective.

Osteoblastlike cell adhesion on titanium surfaces modified by plasma nitriding.

PURPOSE: The aim of this study was to evaluate the characteristics of various titanium surfaces modified by cold plasma nitriding in terms of adhesion and proliferation of rat osteoblastlike cells. MATERIALS AND METHODS: Samples of grade 2 titanium were subjected to three different surface modification processes: polishing, nitriding by plasma direct current, and nitriding by cathodic cage discharge. To evaluate the effect of the surface treatment on the cellular response, the adhesion and proliferation of osteoblastlike cells (MC3T3) were quantified and the results were analyzed by Kruskal-Wallis and Friedman statistical tests. Cellular morphology was observed by scanning electron microscopy. RESULTS: There was more MC3T3 cell attachment on the rougher surfaces produced by cathodic cage discharge compared with polished samples (P < .05). CONCLUSIONS: Plasma nitriding improves titanium surface roughness and wettability, leading to osteoblastlike cell adhesion.

Effect of titanium surface modified by plasma energy source on genotoxic response in vitro.

Titanium (Ti) is currently the most widely used material for the manufacture of orthopedic and dental implants. Changes in the surface of commercial pure Ti (cp Ti) can determine the functional response of cells, and is therefore a critical factor for the success of the implant. However, the genotoxicity of titanium surfaces has been poorly studied. Thus, the purpose of this study was to evaluate the genotoxic potential of a new titanium surface developed by plasma treatment using argon-ion bombardment and compare it with an untreated titanium surface. Accordingly, comet assay, analysis of chromosomal aberrations (CAs), and Cytokinesis Block Micronucleus (CBMN) assay were carried out, using CHO-K1 (Chinese hamster ovary) cells grown on both titanium surfaces. Our results show that the untreated titanium surface caused a significant increase in % tail moment, in the number of cells with CAs, tetraploidy, micronucleus frequency, and other nuclear alterations when compared with the negative control and with the plasma-treated titanium surface. This difference may be attributed to increased surface roughness and changes in titanium oxide layer thickness.