Common Bean Productivity and Micronutrients in the Soil-Plant System under Residual Applications of Composted Sewage Sludge.

Composted sewage sludge (CSS) is an organic fertilizer that can be used as a source of micronutrients in agriculture. However, there are few studies with CSS to supply micronutrients for the bean crop. We aimed to evaluate micronutrient concentrations in the soil and their effects on nutrition, extraction, export, and grain yield in response to CSS residual application. The experiment was carried out in the field at Selvíria-MS, Brazil. The common bean cv. BRS Estilo was cultivated in two agricultural years (2017/18 and 2018/19). The experiment was designed in randomized blocks with four replications. Six different treatments were compared: (i) four increasing CSS rates, i.e., CSS5.0 (5.0 t ha-1 of applied CSS, wet basis), CSS7.5, CSS10.0, CSS12.5; (ii) a conventional mineral fertilizer (CF); (iii) a control (CT) without CSS and CF application. The available levels of B, Cu, Fe, Mn, and Zn were evaluated in soil samples collected in the 0-0.2 and 0.2-0.4 m soil surface horizons. The concentration, extraction, and export of micronutrients in the leaf and productivity of common beans were evaluated. The concentration of Cu, Fe, and Mn ranged from medium to high in soil. The available levels of B and Zn in the soil increased with the residual rates of CSS, which were statistically not different from the treatments with CF. The nutritional status of the common bean remained adequate. The common bean showed a higher requirement for micronutrients in the second year. The leaf concentration of B and Zn increased in the CSS7.5 and CSS10.0 treatments. There was a greater extraction of micronutrients in the second year. Productivity was not influenced by the treatments; however, it was higher than the Brazilian national average. Micronutrients exported to grains varied between growing years but were not influenced by treatments. We conclude that CSS can be used as an alternative source of micronutrients for common beans grown in winter.

Designing the best breeding strategy for Coffea canephora: Genetic evaluation of pure and hybrid individuals aiming to select for productivity and disease resistance traits.

Breeding programs of the species Coffea canephora rely heavily on the significant genetic variability between and within its two varietal groups (conilon and robusta). The use of hybrid families and individuals has been less common. The objectives of this study were to evaluate parents and families from the populations of conilon, robusta, and its hybrids and to define the best breeding and selection strategies for productivity and disease resistance traits. As such, 71 conilon clones, 56 robusta clones, and 20 hybrid families were evaluated over several years for the following traits: vegetative vigor, incidence of rust and cercosporiosis, fruit ripening time, fruit size, plant height, canopy diameter, and yield per plant. Components of variance and genetic parameters were estimated via residual maximum likelihood (REML) and genotypic values were predicted via best linear unbiased prediction (BLUP). Genetic variability among parents (clones) and hybrid families was detected for most of the evaluated traits. The Mulamba-Rank index suggests potential gains up to 17% for the genotypic aggregate of traits in the hybrid population. An intrapopulation recurrent selection within the hybrid population would be the best breeding strategy because the genetic variability, narrow and broad senses heritabilities and selective accuracies for important traits were maximized in the crossed population. Besides, such strategy is simple, low cost and quicker than the concurrent reciprocal recurrent selection in the two parental populations, and this maximizes the genetic gain for unit of time.

Multiple-trait model through Bayesian inference applied to Jatropha curcas breeding for bioenergy.

Multiple-trait model tends to be the best alternative for the analysis of repeated measures, since they consider the genetic and residual correlations between measures and improve the selective accuracy. Thus, the objective of this study was to propose a multiple-trait Bayesian model for repeated measures analysis in Jatropha curcas breeding for bioenergy. To this end, the grain yield trait of 730 individuals of 73 half-sib families was evaluated over six harvests. The Markov Chain Monte Carlo algorithm was used to estimate genetic parameters and genetic values. Genetic correlation between pairs of measures were estimated and four selective intensities (27.4%, 20.5%, 13.7%, and 6.9%) were used to compute the selection gains. The full model was selected based on deviance information criterion. Genetic correlations of low (ρg ≤ 0.33), moderate (0.34 ≤ ρg ≤ 0.66), and high magnitude (ρg ≥ 0.67) were observed between pairs of harvests. Bayesian analyses provide robust inference of genetic parameters and genetic values, with high selective accuracies. In summary, the multiple-trait Bayesian model allowed the reliable selection of superior Jatropha curcas progenies. Therefore, we recommend this model to genetic evaluation of Jatropha curcas genotypes, and its generalization, in other perennials.

Models for optimizing selection based on adaptability and stability of cotton genotypes / Modelos para otimizar a seleção baseada em adaptabilidade e estabilidade de genótipos de algodão

ABSTRACT: In multi-environment trials (MET), large networks are assessed for results improvement. However, genotype by environment interaction plays an important role in the selection of the most adaptable and stable genotypes in MET framework. In this study, we tested different residual variances and measure the selection gain of cotton genotypes accounting for adaptability and stability, simultaneously. Twelve genotypes of cotton were bred in 10 environments, and fiber length (FL), fiber strength (FS), micronaire (MIC), and fiber yield (FY) were determined. Model selection for different residual variance structures (homogeneous and heterogeneous) was tested using the Akaike Information Criterion (AIC) and Bayesian Information Criterion (BIC). The variance components were estimated through restricted maximum likelihood and genotypic values were predicted through best linear unbiased prediction. The harmonic mean of relative performance of genetic values (HMRPGV) were applied for simultaneous selection for adaptability, stability, and yield. According to BIC heterogeneous residual variance was the best model fit for FY, whereas homogeneous residual variance was the best model fit for FL, FS, and MIC traits. The selective accuracy was high, indicating reliability of the prediction. The HMRPGV was capable to select for stability, adaptability and yield simultaneously, with remarkable selection gain for each trait.

RESUMO: Em ensaios multi-ambientes, grandes redes experimentais são utilizadas para a avaliação de genótipos, tentando contornar o efeito que a interação genótipo por ambiente desempenha na seleção genotípica. Neste estudo, objetivamos testar diferentes estruturas de variância residual e medir o ganho de seleção de genótipos de algodão, baseados em produtividade, adaptabilidade e estabilidade, simultaneamente. Doze genótipos de algodão foram plantados em 10 ambientes, sendo determinados o comprimento da fibra (CF), a resistência da fibra (RF), a micronaire (MIC) e produtividade de fibras (PF). A seleção do modelo para diferentes estruturas de variância residual (homogênea e heterogênea) foi testada usando o Critério de Informação de Akaike (AIC) e o Critério de Informação Bayesiano (BIC). Os componentes de variância foram estimados através de máxima verossimilhança restrita e os valores genotípicos foram preditos através da melhor predição linear não viesada. A média harmônica do desempenho relativo dos valores genéticos (HMRPGV) foram aplicadas para seleção simultânea para adaptabilidade, estabilidade e produtividade. De acordo com o BIC, a estrutura residual heterogênea apresentou o melhor ajuste para a característica PF, enquanto a estrutura residual homogênea apresentou o melhor ajuste para as características CF, RF e MIC. A acurácia seletiva foi alta, indicando confiabilidade da predição. O método HMRPGV foi capaz de selecionar para estabilidade, adaptabilidade e produtividade, simultaneamente, com notável ganho de seleção para cada característica.

Soybean productivity, stability, and adaptability through mixed model methodology / Produtividade, estabilidade e adaptabilidade da soja por meio de metodologia de modelo misto

ABSTRACT: The genotype × environment (G×E) interaction plays an essential role in phenotypic expression and can lead to difficulties in genetic selection. Thus, the present study aimed to estimate genetic parameters and to compare different selection strategies in the context of mixed models for soybean breeding. For this, data referring to the evaluation of 30 genotypes in 10 environments, regarding the grain yield trait, were used. The variance components were estimated through restricted maximum likelihood (REML) and genotypic values were predicted through best linear unbiased prediction (BLUP). Significant effects of genotypes and G×E interaction were detected by the likelihood ratio test (LRT). Low genotypic correlation was obtained across environments, indicating complex G×E interaction. The selective accuracy was very high, indicating high reliability. Our results showed that the most productive soybean genotypes have high adaptability and stability.

RESUMO: A interação genótipo × ambiente (G × E) desempenha um papel essencial na expressão fenotípica e pode provocar dificuldades na seleção genética. Assim, o presente estudo teve como objetivo estimar parâmetros genéticos e comparar diferentes estratégias de seleção no contexto de modelos mistos para melhoramento da soja. Para isso, foram utilizados dados referentes à avaliação de 30 genótipos em dez ambientes, referentes à característica produtividade de grãos. Os componentes de variância foram estimados pela máxima verossimilhança restrita (REML) e os valores genotípicos foram preditos pela melhor previsão imparcial linear (BLUP). Efeitos significativos dos genótipos e interação G × E foram detectados pelo teste da razão de verossimilhança (LRT). Correlação genotípica baixa foi obtida entre os ambientes indicando interação G × E do tipo complexa. A acurácia seletiva foi muito alta, indicando alta confiabilidade. Os resultados mostraram que os genótipos de soja mais produtivos apresentam alta adaptabilidade e estabilidade.

Random regression for modeling yield genetic trajectories in Jatropha curcas breeding.

Random regression models (RRM) are a powerful tool to evaluate genotypic plasticity over time. However, to date, RRM remains unexplored for the analysis of repeated measures in Jatropha curcas breeding. Thus, the present work aimed to apply the random regression technique and study its possibilities for the analysis of repeated measures in Jatropha curcas breeding. To this end, the grain yield (GY) trait of 730 individuals of 73 half-sib families was evaluated over six years. Variance components were estimated by restricted maximum likelihood, genetic values were predicted by best linear unbiased prediction and RRM were fitted through Legendre polynomials. The best RRM was selected by Bayesian information criterion. According to the likelihood ratio test, there was genetic variability among the Jatropha curcas progenies; also, the plot and permanent environmental effects were statistically significant. The variance components and heritability estimates increased over time. Non-uniform trajectories were estimated for each progeny throughout the measures, and the area under the trajectories distinguished the progenies with higher performance. High accuracies were found for GY in all harvests, which indicates the high reliability of the results. Moderate to strong genetic correlation was observed across pairs of harvests. The genetic trajectories indicated the existence of genotype × measurement interaction, once the trajectories crossed, which implies a different ranking in each year. Our results suggest that RRM can be efficiently applied for genetic selection in Jatropha curcas breeding programs.

Estimates of genetic parameters, genetic variability, and selection in the S1 generation of peach / Estimativas de parâmetros genéticos, variabilidade genética e seleção em geração S 1 de pessegueiros

ABSTRACT: The growing of peach in mild winter regions is made viable through the use of genotypes that have low need for cold conditions, and this is one of the main aims of breeding for these regions. Thus, the aims of this study were to estimate genetic parameters, evaluate genetic variability, and select families adapted to mild winter regions in the S1 generation of peach through mixed model methodology (REML/BLUP). For that purpose, 22 populations, 84 families, and 2090 individuals were evaluated for the following traits: bud burst rate (BR), node density (ND), plant height (PH), and trunk diameter (TD). Genetic variability was found for all the traits. Individual heritability in the broad sense was of low and medium magnitudes. The PH trait had positive genotypic correlation of high magnitude with TD. The ND trait had moderate negative genotypic correlation with PH and TD. Clustering by the Tocher method resulted in the formation of six mutually exclusive groups. Considering selection intensity of 25%, simultaneous selection for BR, ND, and TD led to predicted gains of 11.3% for BR, 9.7% for ND, -14.2% for PH, and -14.3% for TD, showing the great potential of the germplasm evaluated.

RESUMO: O cultivo do pessegueiro em regiões de inverno ameno é viabilizado pela utilização de genótipos que apresentam baixa necessidade de frio, sendo este um dos principais objetivos do melhoramento para essas regiões. Assim, os objetivos deste estudo foram estimar parâmetros genéticos, avaliar a variabilidade genética e selecionar famílias adaptadas a regiões de inverno ameno em geração S1 de pessegueiros via metodologia de modelos mistos (REML/BLUP). Para isso, 22 populações, 84 famílias e 2090 indivíduos foram avaliados quanto as características: taxa de brotação (TB), densidade de nós (DN), altura da planta (AP) e diâmetro do tronco (DT). Verificou-se variabilidade genética para todas as características. As herdabilidades individuais no sentido amplo foram de baixa e média magnitudes. A característica AP apresentou correlação genética positiva de magnitude elevada com DT. A característica DN apresentou correlação genética negativa moderada com AP e DT. O agrupamento pelo método de Tocher resultou na formação de seis grupos mutuamente excludentes. Considerando intensidade de seleção de 25%, a seleção simultânea para TB, DN e DT propiciou ganhos preditos de 11.3% para TB, 9.7% para DN, -14.2% para AP e -14.3% para DT, evidenciando o grande potencial do germoplasma avaliado.

Multi-trait multi-environment models in the genetic selection of segregating soybean progeny.

At present, single-trait best linear unbiased prediction (BLUP) is the standard method for genetic selection in soybean. However, when genetic selection is performed based on two or more genetically correlated traits and these are analyzed individually, selection bias may arise. Under these conditions, considering the correlation structure between the evaluated traits may provide more-accurate genetic estimates for the evaluated parameters, even under environmental influences. The present study was thus developed to examine the efficiency and applicability of multi-trait multi-environment (MTME) models by the residual maximum likelihood (REML/BLUP) and Bayesian approaches in the genetic selection of segregating soybean progeny. The study involved data pertaining to 203 soybean F2:4 progeny assessed in two environments for the following traits: number of days to maturity (DM), 100-seed weight (SW), and average seed yield per plot (SY). Variance components and genetic and non-genetic parameters were estimated via the REML/BLUP and Bayesian methods. The variance components estimated and the breeding values and genetic gains predicted with selection through the Bayesian procedure were similar to those obtained by REML/BLUP. The frequentist and Bayesian MTME models provided higher estimates of broad-sense heritability per plot (or heritability of total effects of progeny; [Formula: see text]) and mean accuracy of progeny than their respective single-trait versions. Bayesian analysis provided the credibility intervals for the estimates of [Formula: see text]. Therefore, MTME led to greater predicted gains from selection. On this basis, this procedure can be efficiently applied in the genetic selection of segregating soybean progeny.