Mode stabilization in quantum cascade lasers via an intra-cavity cascaded nonlinearity.

We present self-stabilization of the inter-mode separation of a quantum cascade laser (QCL) emitting at 9 µm via cascaded second order nonlinearity. This effect has been observed in lasers that have the optical cavity embedded into a microwave strip-line. The intermodal beat note spectra narrow with increasing laser output power, up to less than 100 kHz. A flat frequency response to direct modulation up to 14 GHz is reported for these microstrip QCLs. The laser inter-mode spacing can be locked to an external RF signal and tuned by more than 1 MHz from the free-running spacing. A parallel study on the same laser material in a non-microstrip line waveguide shows superior performances of the microstrip QCL in terms of the intermodal spectral locking and stability. Finally by analyzing our results with the theory of the injection locking of coupled oscillators, we deduce that the microwave power injected in the microstrip QCL is 2 orders of magnitude higher than in the reference laser.

Optical sideband generation up to room temperature with mid-infrared quantum cascade lasers.

Mid-infrared (MIR) sideband generation on a near infrared (NIR) optical carrier is demonstrated within a quantum cascade laser (QCL). By employing an externally injected NIR beam, E(NIR), that is resonant with the interband transitions of the quantum wells in the QCL, the nonlinear susceptibility is enhanced, leading to both frequency mixing and sideband generation. A GaAs-based MIR QCL (E(QCL) = 135 meV) with an aluminum-reinforced waveguide was utilized to overlap the NIR and MIR modes with the optical nonlinearity of the active region. The resulting difference sideband (E(NIR) - E(QCL)) shows a resonant behavior as a function of NIR pump wavelength and a maximum second order nonlinear susceptibility, χ((2)), of ~1 nm/V was obtained. Further, the sideband intensity showed little dependence with the operating temperature of the QCL, allowing sideband generation to be realized at room temperature.

Electrically driven nanopillars for THz quantum cascade lasers.

In this work we present a rapid and parallel process for the fabrication of large scale arrays of electrically driven nanopillars for THz quantum cascade active media. We demonstrate electrical injection of pillars of 200 nm diameter and 2 µm height, over a surface of 1 mm(2). THz electroluminescence from the nanopillars is reported. This result is a promising step toward the realization of zero-dimensional structure for terahertz quantum cascade lasers.

Broadband THz lasing from a photon-phonon quantum cascade structure.

Laser emission over a broad range of frequencies from 2.8 to 4.1 THz is reported for a two-quantum well, photon-phonon cascade structure. Maximum operating temperatures of 125 K are reported, with optical peak powers in eccess of 30 mW from a double-metal ridge waveguide. The broadband nature of the gain curve is identified as due to coherent coupling of the injector and upper lasing states. Internal quantum efficiencies reaching 43 % are evaluated at 10 K.The laser operates in both polarities, showing laser action in reverse bias up to a temperature of 90 K. Simulations based on a full treatment of the structure with density matrix formalism are also presented and discussed.