Wavelength conversion through stimulated Raman scattering in an oxygen-filled fiber for multi-band LiDAR.

Wavelength conversion afforded by stimulated Raman scattering within a hollow core fiber is potentially useful for multispectral light detection and ranging (LiDAR). Herein, we make use of the ideal 1550 cm-1 vibrational Raman shift of an antiresonant fiber filled with gaseous oxygen so that the first and second Raman orders as well as the transmitted pump are all located in separate atmospheric transmission windows. To the best of our knowledge, this is the first report of stimulated Raman scattering in an oxygen-filled fiber. The host of closely spaced rotational stimulated Raman scattering (SRS) lines (12 cm-1) accompanying the transmitted pump and vibrational Raman orders form continuum bands allowing for much greater spectral coverage of the atmospheric transmission windows. The temporal profiles of the Raman orders can be separated without the use of a grating to potentially achieve a multi-band LiDAR.

Laser2: A two-domain photon-phonon laser.

The laser is one of the greatest inventions in history. Because of its ubiquitous applications and profound societal impact, the concept of the laser has been extended to other physical domains including phonon lasers and atom lasers. Quite often, a laser in one physical domain is pumped by energy in another. However, all lasers demonstrated so far have only lased in one physical domain. We have experimentally demonstrated simultaneous photon and phonon lasing in a two-mode silica fiber ring cavity via forward intermodal stimulated Brillouin scattering (SBS) mediated by long-lived flexural acoustic waves. This two-domain laser may find potential applications in optical/acoustic tweezers, optomechanical sensing, microwave generation, and quantum information processing. Furthermore, we believe that this demonstration will usher in other multidomain lasers and related applications.

Random misalignment and anisotropic deformation of the nested cladding elements in hollow-core anti-resonant fibers.

Hollow-core anti-resonant fibers (HC-ARFs) are en route to compete with and surpass the transmission performance of standard single-mode fibers (SSMFs). Recently, nested cladding elements emerged as a key enabler in reaching ultra-low transmission losses over a wide bandwidth. However, implementing nested geometry features poses a great challenge even in the current state-of-the-art fiber fabrication technology, often leading to structural imperfections, which ultimately worsen overall fiber performance. This article provides insights into the impact of fabrication-based perturbations of the cladding elements on the transmission performance and identifies areas of highest susceptibility. The impact of random outer and nested cladding tube misalignments as well as their anisotropic deformation on the propagation loss is analyzed based on observations of experimentally fabricated fibers. A dominance of the deformation effect over the misalignment effect is observed, with higher-order modes (HOMs) being affected one order of magnitude stronger than the fundamental mode (FM). The impact on propagation loss by structural perturbations is highly wavelength dependent, ranging from negligibly small values up to loss increases of 65% and 850% for FM and HOM propagation, respectively. The investigations are directly linked to fabrication metrics and therefore pave the way for assessing, predicting, and improving the transmission quality of fabricated hollow-core fibers.

Optimal broadband starlight injection into a single-mode fibre with integrated photonic wavefront sensing.

In astronomy and related fields there is a pressing need to efficiently inject light, transmitted through the atmosphere, into a single-mode fibre. However this is extremely difficult due to the large, rapidly changing aberrations imprinted on the light by the turbulent atmosphere. An adaptive optics system must be used, but its effectiveness is limited by non-common-path aberrations and insensitivity to certain crucial modes. Here we introduce a new concept device - the hybrid mode-selective photonic lantern - which incorporates both focal plane wavefront sensing and broadband single-mode fibre injection into a single photonic package. The fundamental mode of an input multimode fibre is directly mapped over a broad (1.5 to 1.8µm) bandwidth to a single-mode output fibre with minimal (<0.1%) crosstalk, while all higher order modes are sent to a fast detector or spectrograph for wavefront sensing. This will enable an AO system optimised for maximum single-mode injection, sensitive to otherwise 'blind' modes and avoiding non-common-path wavefront-sensor aberrations.

Low-crosstalk mode-group demultiplexers based on Fabry-Perot thin-film filters.

Mode-group multiplexing (MGM) can increase the capacity of short-reach few-mode optical fiber communication links while avoiding complex digital signal processing. In this paper, we present the design and experimental demonstration of a novel mode-group demultiplexer (MG DeMux) using Fabry-Perot (FP) thin-film filters (TFFs). The MG DeMux supports low-crosstalk mode-group demultiplexing, with degeneracies commensurate with those of graded-index (GRIN) multimode fibers. We experimentally demonstrate this functionality by using a commercial six-cavity TFF that was intended for 100 GHz channel spaced wavelength-division multiplexing (WDM) system.

Efficient soliton self-frequency shift in hydrogen-filled hollow-core fiber.

We report a study of soliton self-frequency shifting in a hydrogen-filled hollow-core fiber. The combination of hydrogen and short 40-fs input pulses underlies clean and efficient generation of Raman solitons between 1080 and 1600 nm. With 240-nJ input pulses, the Raman soliton energy ranges from 110 to 20 nJ over that wavelength range, and the pulse duration is approximately 45 fs. In particular, 70-nJ and 42-fs pulses are generated at 1300 nm. Numerical simulations agree reasonably well with experiments and predict that microjoule-energy tunable pulses should be possible with higher-energy input pulses.

CO2-based hollow-core fiber Raman laser with high-pulse energy at 1.95 µm.

In this Letter, we present a high-pulse energy (>10µJ) Raman laser at 1946 nm wavelength directly pumped with a 1533 nm custom-made fiber laser. The Raman laser is based on stimulated Raman scattering (SRS) in an 8 m carbon dioxide (CO2)-filled nested anti-resonant hollow-core fiber. The low-energy phonon emission combined with the inherent SRS process along the low-loss fiber allows the generation of high-pulse energy up to 15.4 µJ at atmospheric CO2 pressure. The Raman laser exhibits good long-term stability and low relative intensity noise of less than 4%. We also investigate the pressure-dependent overlap of the Raman laser line with the absorption band of CO2 at the 2 µm spectral range. Our results constitute a novel, to the best of our knowledge, and promising technology towards high-energy 2 µm lasers.

Temperature-insensitive curvature sensor based on Bragg gratings written in strongly coupled multicore fiber.

A novel temperature-insensitive optical curvature sensor has been proposed and demonstrated. The sensor is fabricated by inscribing fiber Bragg gratings with short lengths into a piece of strongly coupled multicore fiber (SCMCF) and spliced to the conventional single-mode fiber. Due to the two supermodes being supported by the SCMCF, two resonance peaks, along with a deep notch between them, were observed in the reflection spectrum. The experimental results show that the depth of the notch changes with the curvature with a sensitivity up to 15.9dB/m-1 in a lower curvature range. Besides, thanks to the unique property of the proposed sensor, the notch depth barely changes with temperature. Based on the intensity demodulation of the notch depth, the temperature-insensitive curvature sensor is achieved with the cross sensitivity between the temperature, and the curvature is as low as 0.001m-1/∘C.

Photonic lantern tip/tilt detector for adaptive optics systems.

In this work, we demonstrate a four-core multicore fiber photonic lantern tip/tilt wavefront sensor. To diagnose the low-order Zernike aberrations, we exploit the ability of the photonic lantern to encode the characteristics of a complex incoming beam at the multimode facet of the sensor to intensity distributions at the multicore fiber output. Here, we provide a comprehensive numerical analysis capable of predicting the performance of fabricated devices and experimentally demonstrate the concept. Two receiver architectures are implemented to discern tip/tilt information by (i) imaging the four-core fiber facet on a 2D detector and (ii) direct power measurement of the single mode outputs using a multicore fiber multiplexer and photodetectors. For both receiver schemes, an angular detection window of ∼0.4∘ at 1064 nm can be achieved. Our results are expected to further facilitate the development of intensity-based fiber wavefront sensors for adaptive optics systems.

Demonstration of high-efficiency photonic lantern couplers for PolyOculus.

The PolyOculus technology produces large-area-equivalent telescopes by using fiber optics to link modules of multiple semi-autonomous, small, inexpensive, commercial-off-the-shelf telescopes. Crucially, this scalable design has construction costs that are >10× lower than equivalent traditional large-area telescopes. We have developed a novel, to the best of our knowledge, photonic lantern approach for the PolyOculus fiber optic linkages that potentially offers substantial advantages over previously considered free-space optical linkages, including much higher coupling efficiencies. We have carried out the first laboratory tests of a photonic lantern prototype developed for PolyOculus, and demonstrated broadband efficiencies of ∼91%, confirming the outstanding performance of this technology.

Modeling quasi-phase-matched electric-field-induced optical parametric amplification in hollow-core photonic crystal fibers.

Laser sources in the short- and mid-wave infrared spectral regions are desirable for many applications. The favorable spectral guidance and power handling properties of an inhibited coupling hollow-core photonic crystal fiber (HC-PCF) enable nonlinear optical routes to these wavelengths. We introduce a quasi-phase-matched, electric-field-induced, pressurized xenon-filled HC-PCF-based optical parametric amplifier. A spatially varying electrostatic field can be applied to the fiber via patterned electrodes with modulated voltages. We incorporate numerically modeled electrostatic field amplitudes and fringing, modeled fiber dispersion and transmission, and calculated voltage thresholds to determine fiber lengths of tens of meters for efficient signal conversion for several xenon pressures and electrode configurations.

Enhanced birefringence in conventional and hybrid anti-resonant hollow-core fibers.

A hollow-core anti-resonant fiber (HC-ARF) design based on hybrid silica/silicon cladding is proposed for single-polarization, single-mode and high birefringence. We show that by adding silicon layers in a semi-nested HC-ARF, one of the polarization states can be strongly suppressed while simultaneously maintaining low propagation loss for other polarization states, single-mode and high birefiringence. The optimized HC-ARF design exhibits propagation loss, high birefringence, and polarization-extinction ratio of 0.05 dB/m, 0.5 × 10-4, >300 respectively for y-polarization while the loss of x-polarization is >5 dB/m at 1064 nm. The fiber also has low bend-loss and thus can be coiled to a small bend radii of 5 cm having ≈0.06 dB/m bend loss.

Long-range multicore optical fiber displacement sensor.

In this Letter, a long-range optical fiber displacement sensor based on an extrinsic Fabry-Perot interferometer (EFPI) built with a strongly coupled multicore fiber (SCMCF) is proposed and demonstrated. To fabricate the device, 9.2 mm of SCMCF was spliced to a conventional single-mode fiber (SMF). The sensor reflection spectrum is affected by super-mode interference in the SCMCF and the interference produced by the EFPI. Displacement of the SMF-SCMCF tip with respect to a reflecting surface produces quantifiable changes in the amplitude and period of the interference pattern in the reflection spectrum. Since the multicore fiber is an efficient light collecting area, sufficient signal intensity can be obtained for displacements of several centimeters. By analyzing the interference pattern in the Fourier domain, it was possible to measure displacements up to 50 mm with a resolution of approximately 500 nm. To our knowledge, this is the first time that a multicore fiber has been used to build a displacement sensor. The dynamic measurement range is at least seven times larger than that achieved with an EFPI built with a conventional SMF. Moreover, the SMF-SCMCF tip is robust and easy to fabricate and replicate.

Compact omnidirectional multicore fiber-based vector bending sensor.

We propose and demonstrate a compact and simple vector bending sensor capable of distinguishing any direction and amplitude with high accuracy. The sensor consists of a short segment of asymmetric multicore fiber (MCF) fusion spliced to a standard single mode fiber. The reflection spectrum of such a structure shifts and shrinks in specific manners depending on the direction in which the MCF is bent. By monitoring simultaneously wavelength shift and light power variations, the amplitude and bend direction of the MCF can be unmistakably measured in any orientation, from 0° to 360°. The bending sensor proposed here is highly sensitive even for small bending angles (below 1°).

Impact of cladding elements on the loss performance of hollow-core anti-resonant fibers.

Understanding the impact of the cladding tube structure on the overall guiding performance is crucial for designing a single-mode, wide-band, and ultra low-loss nested hollow-core anti-resonant fiber (HC-ARF). Here we thoroughly investigate on how the propagation loss is affected by the nested elements when their geometry is realistic (i.e., non-ideal). Interestingly, it was found that the size, rather than the shape, of the nested elements has a dominant role in the final loss performance of the regular nested HC-ARFs. We identify a unique 'V-shape' pattern for suppression of higher-order modes loss by optimizing free design parameters of the HC-ARF. We find that a 5-tube nested HC-ARF has wider transmission window and better single-mode operation than a 6-tube HC-ARF. We show that the propagation loss can be significantly improved by using anisotropic nested anti-resonant tubes elongated in the radial direction. Our simulations indicate that with this novel fiber design, a propagation loss as low as 0.11 dB/km at 1.55 µm can be achieved. Our results provide design insight toward fully exploiting a single-mode, wide-band, and ultra low-loss HC-ARF. In addition, the extraordinary optical properties of the proposed fiber can be beneficial for several applications such as future optical communication system, high energy light transport, extreme non-nonlinear optics and beyond.

Mid-infrared photoacoustic gas monitoring driven by a gas-filled hollow-core fiber laser.

Development of novel mid-infrared (MIR) lasers could ultimately boost emerging detection technologies towards innovative spectroscopic and imaging solutions. Photoacoustic (PA) modality has been heralded for years as one of the most powerful detection tools enabling high signal-to-noise ratio analysis. Here, we demonstrate a novel, compact and sensitive MIR-PA system for carbon dioxide (CO2) monitoring at its strongest absorption band by combining a gas-filled fiber laser and PA technology. Specifically, the PA signals were excited by a custom-made hydrogen (H2) based MIR Raman fiber laser source with a pulse energy of ⁓ 18 µJ, quantum efficiency of ⁓ 80% and peak power of ⁓ 3.9 kW. A CO2 detection limit of 605 ppbv was attained from the Allan deviation. This work constitutes an alternative method for advanced high-sensitivity gas detection.

Multi-wavelength high-energy gas-filled fiber Raman laser spanning from 1.53 µm to 2.4 µm.

In this work, we present a high-pulse-energy multi-wavelength Raman laser spanning from 1.53 µm up to 2.4 µm by employing the cascaded rotational stimulated Raman scattering effect in a 5 m hydrogen (H2)-filled nested anti-resonant fiber, pumped by a linearly polarized Er/Yb fiber laser with a peak power of ∼13kW and pulse duration of ∼7ns in the C-band. The developed Raman laser has distinct lines at 1683 nm, 1868 nm, 2100 nm, and 2400 nm, with pulse energies as high as 18.25 µJ, 14.4 µJ, 14.1 µJ, and 8.2 µJ, respectively. We demonstrate how the energy in the Raman lines can be controlled by tuning the H2 pressure from 1 bar to 20 bar.

Multiport swept-wavelength interferometer with laser phase noise mitigation employing a broadband ultra-weak FBG array.

Optical vector network analyzers (OVNAs) based on swept-wavelength interferometry are applied widely in optical metrology and sensing to measure the complex transfer functions of optical components, devices, and fibers. Phase noise from laser sweep nonlinearities degrades the measurement quality as the distance increases and limits the usage of the OVNA in characterizing systems with long impulse responses as required in space-division multiplexing links with a high mode count or in the presence of large modal differential group delay (DGD). In this Letter, we use a densely distributed broadband ultra-weak fiber Bragg grating array to directly measure the distortion due to phase noise at a 5-m increment up to 400 m and use this measured data to directly eliminate the distortion. We experimentally extend the measurement range of the swept-wavelength OVNA over 400 m and successfully characterize a 2-km six-mode multimode fiber link with an accumulated impulse response as wide as 20 ns.

Highly sensitive multicore fiber accelerometer for low frequency vibration sensing.

We report on a compact, highly sensitive all-fiber accelerometer suitable for low frequency and low amplitude vibration sensing. The sensing elements in the device are two short segments of strongly coupled asymmetric multicore fiber (MCF) fusion spliced at 180° with respect to each other. Such segments of MCF are sandwiched between standard single mode fibers. The reflection spectrum of the device exhibits a narrow spectrum whose height and position in wavelength changes when it is subjected to vibrations. The interrogation of the accelerometer was carried out by a spectrometer and a photodetector to measure simultaneously wavelength shift and light power variations. The device was subjected to a wide range of vibration frequencies, from 1 mHz to 30 Hz, and accelerations from 0.76 mg to 29.64 mg, and performed linearly, with a sensitivity of 2.213 nW/mg. Therefore, we believe the accelerometer reported here may represent an alternative to existing electronic and optical accelerometers, especially for low frequency and amplitude vibrations, thanks to its compactness, simplicity, cost-effectiveness, implementation easiness and high sensitivity.