Comparison between 2D cephalometric and 3D digital model superimpositions in patients with lateral incisor agenesis treated by canine substitution.

INTRODUCTION: This study aimed to assess the reliability of measurements obtained after superimposing 3-dimensional (3D) digital models by comparing them with those obtained from lateral cephalometric radiographs in patients with lateral agenesis space closure by mesialization. METHODS: Data were collected from premaxillary and postmaxillary dental casts and lateral cephalometric radiographs of 26 patients presenting lateral incisor agenesis and treated with rapid maxillary expanders and space closure by mesialization of the lateral sectors. Sagittal and vertical movements of the incisors and the maxillary molars were evaluated with lateral cephalometric radiographs and digitized 3D models superimposed on the palatal area. Paired sample t tests were used to determine if any significant difference existed between the 2 measuring techniques and between 2 different localizations of superimpositions. RESULTS: Cephalograms and 3D digital model measurements were statistically similar in molars and incisor movements according to anteroposterior and vertical planes. Regarding incisor movements in the anteroposterior plane, measurements derived from second ruga 3D models were significantly greater than those derived from third ruga 3D digital models. CONCLUSIONS: The 3D model superimposition method using the palate as a reference area is clinically reliable for assessing anteroposterior and vertical tooth movement as cephalometric superimposition in patients treated with rapid maxillary expanders and space closure by mesialization.

Association among craniofacial morphology, ethnicity, and risk of pediatric sleep-related breathing disorders: A multicenter study.

INTRODUCTION: Craniofacial morphology and ethnicity may be risk factors for sleep-related breathing disorder (SRBD) in children but have not yet been assessed in an international multicenter study. The objectives of this study were to assess the association among craniofacial features, self-reported ethnicity, and risk of SRBD in children undergoing orthodontic treatment. METHODS: Children aged 5-18 years who presented for orthodontic evaluation were enrolled in the United States, South Africa, South Korea, Saudi Arabia, and Japan. The risk of SRBD was defined as answering ≥0.33 positive responses to the Pediatric Sleep Questionnaire. Craniofacial features included measurements in sagittal and vertical dimensions to evaluate the cranial base, maxillomandibular and dental relationships, and nasopharyngeal airway dimensions. Logistic regression was performed to assess the association among craniofacial features, ethnicity, age, body mass index, and risk of SRBD. RESULTS: Data were obtained from 602 patients from 5 sites. A total of 76 patients (12.6%) had a risk of SRBD. The mean age was 12.5 years. Male gender (odds ratio [OR], 1.9; 95% confidence interval [CI], 1.0-3.4; P = 0.041), Middle Eastern ethnicity (OR, 10.2; 95% CI, 4.1-25.4; P = 0.001), body mass index (OR, 1.1; 95% CI, 1.04-1.10; P = 0.001), gonial angle (OR, 0.91; 95% CI, 0.85-0.98; P = 0.011), and inferiorly positioned hyoid (OR, 1.1; 95% CI, 1.0-1.2; P = 0.002) were significantly associated with the risk of SRBD. CONCLUSIONS: In an ambidirectional cohort study across 5 sites, male gender, Middle Eastern ethnicity, body mass index, gonial angle, and inferiorly positioned hyoid were associated with the risk of SRBD in children undergoing orthodontic treatment.

Oral Glucosamine in the Treatment of Temporomandibular Joint Osteoarthritis: A Systematic Review.

Temporomandibular disorders (TMDs) occur frequently within the general population and are the most common non-dental cause of orofacial pain. Temporomandibular joint osteoarthritis (TMJ OA) is a degenerative joint disease (DJD). There have been several different methods of treatment of TMJ OA listed, including pharmacotherapy among others. Due to its anti-aging, antioxidative, bacteriostatic, anti-inflammatory, immuno-stimulating, pro-anabolic and anti-catabolic properties, oral glucosamine seems to be a potentially very effective agent in the treatment of TMJ OA. The aim of this review was to critically assess the efficacy of oral glucosamine in the treatment of TMJ OA on the basis of the literature. PubMed and Scopus databases were analyzed with the keywords: (temporomandibular joints) AND ((disorders) OR (osteoarthritis)) AND (treatment) AND (glucosamine). After the screening of 50 results, eight studies have been included in this review. Oral glucosamine is one of the symptomatic slow-acting drugs for osteoarthritis. There is not enough scientific evidence to unambiguously confirm the clinical effectiveness of glucosamine supplements in the treatment of TMJ OA on the basis of the literature. The most important aspect affecting the clinical efficacy of oral glucosamine in the treatment of TMJ OA was the total administration time. Administration of oral glucosamine for a longer period of time, i.e., 3 months, led to a significant reduction in TMJ pain and a significant increase in maximum mouth opening. It also resulted in long-term anti-inflammatory effects within the TMJs. Further long-term, randomized, double-blind studies, with a unified methodology, ought to be performed to draw the general recommendations for the use of oral glucosamine in the treatment of TMJ OA.

Comparison of the accuracy of bracket positioning between direct and digital indirect bonding techniques in the maxillary arch: a three-dimensional study.

BACKGROUND/OBJECTIVES: When the indirect bonding technique was developed in 1972 by Silverman and Cohen, many authors wondered whether this technique would improve bracket positioning accuracy compared to the direct bonding technique. Studies have found little to no difference between them regarding positioning accuracy. Recently, technological advances have improved the indirect method by allowing the user to position the brackets virtually using software applications such as OrthoAnalyzer™. To the best of our knowledge, no studies have compared direct positioning to this new digital indirect technique. Thus, the aim of this study was to compare the accuracy of placement between the two techniques in the maxillary arch using two different bracket types: conventional twin brackets and self-ligating brackets. A secondary objective was to evaluate whether bracket type affected positioning accuracy. METHODS: A maxillary arch of a patient was scanned by digital impression. Forty resin duplicates of this model were printed and then mounted on a mannequin head, on which 20 practitioners performed direct bonding using the aforementioned brackets. Later on, they performed a virtual indirect bonding of the same case virtually, with the digital impression superimposed to the patient's CBCT (cone-beam computed tomography). Afterwards, the direct bonded models were unmounted, scanned, and then superimposed to the indirect models. Differences in height, angulation and mesio-distal position of the brackets were evaluated. RESULTS: Regarding height, the differences between direct and indirect methods were not significant. Height difference was significantly greater for self-ligating brackets compared to conventional brackets. Regarding mesio-distal positioning, significant differences were noted for teeth 13 and 15 with self-ligating brackets (p-value = 0.019 and p-value = 0.043, respectively). The deviation was also greater for these brackets. Regarding angulation, the difference was significant on tooth 12 when using conventional brackets (p-value = 0.04) and on 12 and 22 when using self-ligating brackets (p-value = 0.09). CONCLUSION/IMPLICATIONS: There were no major significant differences between direct and indirect bonding. Differences were significant only on the laterals for of angulation, and on teeth 13 and 15 for mesio-distal centering. The bracket type seems to influence positioning accuracy, since self-ligating brackets had a larger deviation range than conventional brackets.

Effect of Class II elastics on different mandibular arch preparation stabilized with aligners and stainless-steel wires: A FEM study.

Finite element models that simulate the effects of class II elastics on the mandibular arch in six different scenarios, using various immobilization methods of the posterior dentition, were studied. Per-element distribution of linear elastic stress-strain and total displacement was computed. Maximum strain on the PDL and maximum stress on alveolar bone increased with posterior tip-back and with the use of archwires vs. aligners. The configuration of the dentition affects the performance of aligners. They perform best on an unlevelled mandibular arch. Applying class II elastics results in vertical side effects that can be modulated by various mandibular stabilization methods. This is likely to be clinically relevant for high-angle patients and may explain the differing effects on the facial profile observed using various treatment modalities. 1-Increasing mandibular molar tip-back generally resulted in less eruption tendencies, with mandibular anchorage preparation resulting in the least amount of calculated vertical displacement. 2-Unexpectedly, with class II forces the use of aligner technology on an unlevelled curve of Spee resulted in improved vertical control when compared to aligner use on a levelled dentition. 3-Generally, using an archwire results in better transmission of stresses to adjacent teeth than the use of aligners. 4-Simulating interarch elastics requires implementing a medial component/orientation of the forces to better emulate clinical situations. 5-A hypothetical configuration: 15o tip-back of the mandibular second molar and aligner stabilization displayed the least amount of vertical movement and the most forward horizontal movement of the 2nd molar.

Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis.

The mechanical properties and the thickness of the resin cement agents used for bonding inlay bridges can modify the clinical performance of the restoration such as debonding or prosthetic materials fracture. Thus, the aim of this study was to evaluate the stress distribution and the maximum strain generated by resin cements with different elastic moduli and thicknesses used to cement resin-bonded fixed partial denture (RBFPD). A three-dimensional (3D) finite element analysis (FEA) was used, and a 3D model was created based on a Cone-Beam Computed Tomography system (CBCT). The model was analyzed by the Ansys software. The model fixation occurred at the root of the abutment teeth and an axial load of 300 N was applied on the occlusal surface of the pontic. The highest stress value was observed for the Variolink 0.4 group (1.76 × 106 Pa), while the lowest was noted for the Panavia 0.2 group (1.07 × 106 Pa). Furthermore, the highest total deformation value was found for the Variolink 0.2 group (3.36 × 10-4 m), while the lowest was observed for the Panavia 0.4 group (2.33 × 10-4 m). By means of this FEA, 0.2 mm layer Panavia F2.0 seemed to exhibit a more favorable stress distribution when used for cementation of posterior zirconium-dioxide-based RBFPD. However, both studied materials possessed clinically acceptable properties.

Residual Adhesive Removal Methods for Rebonding of Debonded Orthodontic Metal Brackets: Systematic Review and Meta-Analysis.

Debonding of orthodontic brackets is a common occurrence during orthodontic treatment. Therefore, the best option for treating debonded brackets should be indicated. This study aimed to evaluate the bond strength of rebonded brackets after different residual adhesive removal methods. This systematic review and meta-analysis was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. PubMed, Web of Science, The Cochrane Library, SciELO, Scopus, LILACS, IBECS, and BVS databases were screened up to December 2020. Bond strength comparisons were made considering the method used for removing the residual adhesive on the bracket base. A total of 12 studies were included for the meta-analysis. Four different adhesive removal methods were identified: sandblasting, laser, mechanical grinding, and direct flame. When compared with new orthodontic metallic brackets, bond strength of debonded brackets after air abrasion (p = 0.006), mechanical grinding (p = 0.007), and direct flame (p < 0.001) was significantly lower. The use of an erbium-doped yttrium aluminum garnet (Er:YAG) laser showed similar shear bond strength (SBS) values when compared with those of new orthodontic brackets (p = 0.71). The Er:YAG laser could be considered an optimal method for promoting the bond of debonded orthodontic brackets. Direct flame, mechanical grinding, or sandblasting are also suitable, obtaining clinically acceptable bond strength values.

The curve of Spee and its levelling in different vertical skeletal patterns: A 3D set-up study.

OBJECTIVES: Primary: to compare intra-arch measurements [Curve Of Spee (COS) depth, space required to level the COS (δ), uprighting angles of 1st and 2nd lower molars (αM1 & αM2), respectively] between different vertical skeletal patterns. Secondary: to explore the relationship between those measurements in each vertical skeletal pattern. METHODS: 90 Plaster models were scanned and transformed into digital models using 3Shape Ortho System™ intra oral scanner. COS depth, (δ), αM1 & αM2 were measured on digital models using 3Shape Ortho Analyser™ software. The latter was used to achieve the virtual set-up. The sample was dividied into 3 groups according to the vertical skeletal pattern which was identified by measuring the FMA˚ angle (Frankfort mandibular plane) on a lateral cephalogram using Dolphin imaging software. RESULTS: The deepest COS was present in the hypodivergent group (P-value=0.001). No difference for the additional arch space required to level the COS (δ) between different vertical skeletal patterns (P-value=0.063). αM2 is the same in all 3 groups, whereas αM1 is greater in normodivergents compared to hyperdivergents (P-value=0.012). A positive correlation exists between the deepest point of the COS and the uprighting angles, αM1 and αM2. No correlation between (δ) and the different parameters evaluated (deepest point of the COS, αM1 and αM2). CONCLUSIONS: Additional arch space required to level the COS presented no correlation with the vertical skeletal pattern. Levelling the lower arch was carried out by extrusion of the premolars and uprighting of the posterior teeth; confirming that well-planned orthodontic mechanics can minimize side effects (flaring of the lower incisors) encountered during treatment.

Canine substitution of congenitally missing maxillary lateral incisors in Class I and Class III malocclusions by using skeletal anchorage.

INTRODUCTION: This prospective cohort study aimed to evaluate canine substitution supported by skeletal anchorage as a viable treatment protocol for patients with maxillary lateral incisor agenesis (MLIA) and skeletal Class I or Class III. METHODS: Patients (n = 30) who met the following criteria were recruited: (1) bilateral MLIA or unilateral MLIA with a riziform contralateral incisor with a planned extraction; (2) skeletal Class I or Class III; and (3) dentoalveolar discrepancy in the mandible <5 mm. The archwire sequence routine was administered, combined with a rapid palatal expander, temporary intraoral skeletal anchorage device, and intermaxillary traction with Class III elastics. The results of the cephalometric analyses, peer assessment rating indexes, and the patient's smile self-evaluation using the visual analog scale were compared between initial and final treatments. RESULTS: This study indicated that closing the space in patients with Class I or Class III malocclusion by using temporary intraoral skeletal anchorage devices in the mandible, along with Class III elastics, yielded satisfactory outcomes. Proper occlusion was established by mesialization of the maxillary teeth and correction of the intermaxillary discrepancy, thereby yielding beneficial and significant cephalometric changes after the treatment. The soft tissue profile was maintained when it was harmonious before the treatment and improved posttreatment in patients in whom the profile was initially inharmonious. All occlusions improved, as evidenced by the peer assessment rating index. Smile esthetics were also enhanced after orthodontic treatment for all patients. CONCLUSIONS: Canine substitution may be safely offered to patients with Class I and Class III skeletal pattern and MLIA.

[The orthodontic surgical approach revisited]. / L'approche orthodontico-chirurgicale revisitée.

An adequate orthodontic preparation is a key to success of every orthognatic surgery. Therefore, the detection and the correction of the existing dentoalveolar compensation tend to favor the correction of the skeletal defects. The pre-surgical orthodontic goals have to be defined at the beginning of the treatment, thus, not always achieving a complete leveling of the arches, nor a final space closure and ideal intercuspation. The orthodontic preparation aims to guide the surgical skeletal displacements. Many dentoalveolar compensations can be identified as specific to different types of malocclusion. Accordingly, an adequate individualized planning and a good coordination between both orthodontist and surgeon, are of a major importance, in order to avoid unexpected traps during orthodontic pre-surgical preparation.

Effects of buccal and lingual enamel sandblasting on shear bond strength of orthodontic brackets bonded with a self-etching primer.

The purpose of this study was to evaluate the effects of sandblasting on the initial shear bond strength (SBS) and on the bracket/adhesive failure mode of orthodontic brackets bonded on buccal and lingual enamel using a self-etching primer (SEP). The brackets were bonded using a SEP and composite resin on the buccal and lingual surfaces of 30 premolars with intact enamel and 30 premolars pretreated by sandblasting with 50 µm aluminum-oxide. Student's paired t-test was used to compare the groups for differences in SBS and a multiple Chi(2) test was performed to compare the bond failure mode. It was shown that sandblasting increases significantly SBS of the SEP on the buccal surfaces but the increase on the lingual surfaces is not statistically significant. A comparison of the adhesive remnant index scores indicated that there was more residual adhesive remaining on the teeth that were treated by sandblasting than on the teeth with intact enamel. Besides, there is no statistical difference between SBS of the SEP on buccal and lingual surfaces with intact enamel. Therefore, we can conclude that sandblasting improves the bond between buccal and lingual enamel and resin ant that the SEP provides the same SBS on buccal and lingual intact surfaces.

Three-year follow-up of a patient with hemifacial microsomia treated with distraction osteogenesis, temporary anchorage devices, and orthodontics.

The purpose of this case report is to describe the treatment, including 3-year follow-up records, for a patient with hemifacial microsmia. Treatment included the unusual use of temporary anchorage devices to correct the cant of the occlusal plane. The advantages of distraction osteogenesis are discussed. The successful outcome depended on the collaboration of the orthodontist and the craniofacial surgeon.

Shear bond strength of orthodontic brackets bonded with self-etching primer to intact and pre-conditioned human enamel.

OBJECTIVE: The purpose of this study was to evaluate the shear bond strength of orthodontic bracket when bonded to pre-conditioned and intact enamel using a self-etching primer within 6 hours and after thermal cycling. MATERIAL AND METHODS: One hundred and twenty freshly-extracted human teeth were divided into four groups according to how the buccal surface to be bonded had been pre-conditioned: 1) acid-etched with 37% phosphoric acid, 2) sand-blasted with 50 microns aluminum-oxide, 3) matted with diamond burr, and 4) intact enamel used as control. Orthodontic metal brackets were bonded to the teeth using the same composite resin (Transbond XT) and self-etching primer (Transbond Plus Self-Etching Primer). Brackets were debonded within 6 hours or after thermal cycling for 2500 times (5 degrees C--37 degrees C--55 degrees C). Shear bond strength was measured on a testing machine at a crosshead speed of 3 mm/min. The bracket-failure interface was quantified according to the modified adhesive remnant index score (ARI). Data were analyzed using the two-way ANOVA test, Scheffé confidence interval of differences of means, and the chi-square test (p < 0.05). RESULTS: All the pre-conditioned groups showed significantly higher shear bond strength before and after thermal cycling than the control group. There was no significant correlation between thermal cycling and shear bond strength. The ARI scores revealed that the bond failed primarily on the adhesive-enamel interface in all groups before and after thermal cycling, with the exception of the acid-etched group, whose bonds failed mainly on the adhesive-bracket interface after thermal cycling. CONCLUSION: The authors recommend that the enamel be preconditioned before applying the self-etching primer when greater shear bond strength is desired.