Pesticide Residues and Metabolites in Greek Honey and Pollen: Bees and Human Health Risk Assessment.

BACKGROUND: Bees encounter a plethora of environmental contaminants during nectar and pollen collection from plants. Consequently, after their entrance into the beehives, the transfer of numerous pollutants to apicultural products is inevitable. METHODS: In this context, during the period of 2015-2020, 109 samples of honey, pollen, and beebread were sampled and analyzed for the determination of pesticides and their metabolites. More than 130 analytes were investigated in each sample by applying two validated multiresidue methods (HPLC-ESI-MS/MS and GC-MS/MS). RESULTS: Until the end of 2020, 40 determinations were reported in honey, resulting in a 26% positive to at least one active substance. The concentrations of pesticides ranged from 1.3 ng/g to 785 ng/g honey. For seven active substances in honey and pollen, maximum residue limits (MRLs) exceedances were observed. Coumaphos, imidacloprid, acetamiprid, amitraz metabolites (DMF and DMPF), and tau-fluvalinate were the predominant compounds detected in honey, while several pyrethroids such as λ-cyhalothrin, cypermethrin, and cyfluthrin were also found. Pollen and beebread, as expected, accumulated a higher number of active substances and metabolites (32 in total), exhibiting almost double the number of detections. CONCLUSIONS: Although the above findings verify the occurrence of numerous pesticide and metabolite residues in both honey and pollen, the human risk assessment in the majority of the cases does not raise any concerns, and the same applies to bee risk assessment.

Prediction of Dermal Exposure to Chemical Substances Using a Fluorescence Method within the SysDEA Project.

Dermal exposure is an important exposure route for occupational exposure and risk assessment. A fluorescence method has been developed to quantify occupational dermal exposure based on a visualization technique, using Tinopal SWN as a fluorescent tracer. The method was developed within the framework of a large experimental study, the SysDEA project. In SysDEA, dermal exposure was measured with different methods for 10 simulated exposure situations by sampling powder and liquid formulations containing Tinopal SWN on coveralls and patches and subsequently chemically analysing them. For the fluorescence method, photographs of exposed volunteers who performed the experiments were taken inside a room which consisted of an optimized arrangement of several UV irradiating tube light brackets, reflective and non-reflective backgrounds for maximum light diffusion and a camera. Image processing analysis software processed these photographs to obtain corresponding light intensity in terms of summed pixel values. To be able to estimate the amount of Tinopal SWN, 25% of the measured data from the SysDEA experiments were used to calibrate by correlating the summed pixel values from the photographs to actual measured exposure values using a second order regression model. For spraying both high and low viscosity liquids, showing uniformly distributed exposure patterns, strong Pearson correlation coefficients (R > 0.77) were observed. In contrast, the correlations were either inconsistently poor (R = -0.17 to 0.28 for pouring, rolling high viscosity liquid, manually handling objects immersed in low viscosity liquid and handling objects contaminated with powder), moderate (R = 0.73 for dumping of powder), or strong (R = 0.83 and 0.77 for rolling low viscosity liquid and manually handling objects immersed in high viscosity liquid). A model for spraying was developed and calibrated using 25% of the available experimental data for spraying and validated using the remaining 75%. Under given experimental conditions, the fluorescence method shows promising results and can be used for the quantification of dermal exposure for different body parts (excluding hands) for spraying-like scenarios that have a more uniform exposure pattern, but more research is needed for exposure scenarios with less uniform exposure patterns. For the estimation of exposure levels, the surface loading limit should be lower than 1.5░µg/cm2 (a lower limit could not be quantified based on experiments conducted in this study) on a large surface, like a coverall, which should be ideally perpendicular to the camera.

Pesticides residues and metabolites in honeybees: A Greek overview exploring Varroa and Nosema potential synergies.

The aim of this study was to investigate reported cases of honeybee mortality incidents and the potential association to pesticide exposure and to their metabolites. The same honeybee samples were also assessed for Varroa mites, and Nosema microsporidia provoked infections to provide an integrated picture of all observable stressors that may impact bees' survival. Thus, honeybee samples from different areas of Greece (2014-2018) were analyzed for the presence of pesticide residues and metabolites. In this context, an existing LC-ESI-QqQ-MS multiresidue method of analytes of different chemical classes such as neonicotinoids, organophosphates, triazoles, carbamates, was enriched with additional active substances, developed and validated. A complementary GC-EI-QqQ-MS method was also exploited for the same scope covering pyrethroid compounds. Both methods monitored more than 150 active substances and metabolites and presented acceptable linearity over the ranges assayed. The calculated recoveries ranged from 65 to 120% for the three concentration levels, while the precision (RSD%) values ranged between 4 and 15%. Therefore, this approach proved sufficient to act as a monitoring tool for the determination of pesticide residues in cases of suspected honeybee poisoning incidents. From the analysis of 320 samples, the presence of 70 active substances and metabolites was confirmed with concentrations varying from 1.4 ng/g to 166 µg/g. Predominant detections were the acaricide coumaphos, several neonicotinoids exemplified by clothianidin, organophosporous compounds dimethoate and chlorpyrifos, and some pyrethroids. Metabolites of imidacloprid, chlorpyrifos, coumaphos, acetamiprid, fenthion and amitraz were also identified. Concerning Nosema and Varroa they were identified in 27 and 22% of samples examined, respectively, verifying their prevalence and coexistence with pesticides and their metabolites in honeybees.

Experimental Assessment of Inhalation and Dermal Exposure to Chemicals During Industrial or Professional Activities in Relation to the Performance of ECETOC TRA.

For many work situations only insufficient exposure data are available to perform proper risk assessment. Because measuring worker exposure can be time consuming and resource intense, the availability of reliable exposure models is important when performing risk assessments. However, the development and improvement of exposure models are hampered by scarcity of sound exposure data as well as by lack of information on relevant exposure factors and conditions of exposure. This paper describes a study where inhalation and dermal exposure data were collected under defined conditions. Exposure scenarios examined included tasks that have not been investigated in previous validation studies. The results of these measurements were compared with ECETOC TRA model version 3.1 predictions. In this study, five exposure scenarios were selected, namely 'use in a closed batch process' (PROC 4), 'mixing or blending in a partly open batch process' (PROC 5), 'rolling' (PROC 10), 'immersion' (PROC 13), and 'stirring' (PROC 19). These PROCs stem from the descriptors that Registration, Evaluation and Authorization of Chemicals has established to depict the identified uses of chemical substances. These exposure scenarios were selected mainly because little or no data are available for these situations, or ECETOC TRA is likely to underestimate exposure for these situations. Experiments were performed by volunteers for the selected exposure scenarios, in which tasks were performed aiming to represent real workplace situations. In total 70 experiments were performed, during which 70 dermal exposure measurements (5 volunteers × 2 repeats × 7 scenarios) and 32 inhalation exposure measurements (4 volunteers × 2 repeats × 4 scenarios) were collected. Two formulations were used, namely pure Tinopal SWN powder (solid product, a fluorescent tracer) and 0.5% Tinopal SWN dissolved in 1,2-dichloroethane (1,2-DCE). DCE is considered a moderate volatile liquid. For exposure scenarios using the liquid formulation, both inhalation and dermal measurements were performed, while for exposure scenarios using the pure powder only dermal exposure measurements were performed. In addition, photographs were taken under ultraviolet light to qualitatively assess exposure patterns on hands and body. Volunteers repeatedly performed a selection of tasks under standardized conditions in a test chamber for each exposure scenario. Results show that ECETOC TRA overestimated dermal hand exposure for all PROCs included in the study, and was considered to be conservative. Additionally, ECETOC TRA overestimated inhalation exposure for closed and partially closed processes, but underestimated inhalation exposure for rolling and handling of immersed objects. Qualitative assessment of the hands and body showed mainly the hands were exposed for tasks involving closed and partially closed processes and when handling of immersed objects. Exposure to other body segments were also observed for rolling and stirring. In conclusion, this study gave insights into dermal and inhalation exposure levels during selected task scenarios, and showed that ECETOC TRA is conservative when dermal exposure is estimated. Inhalation exposure estimates for PROCs 10 and 13 tasks with the moderate volatility liquid were underestimated in this study. It may be therefore necessary to re-evaluate base model predictions for these scenarios when medium fugacity liquids are involved.

Comparison of Measurement Methods for Dermal Exposure to Hazardous Chemicals at the Workplace: The SysDEA Project.

There is a principal need for more precise methodology with regard to the determination of occupational dermal exposure. The goal of the Systematic analysis of Dermal Exposure to hazardous chemical Agents at the workplace project was therefore to generate scientific knowledge to improve and standardize measurement methods for dermal exposure to chemicals at the workplace. In addition, the comparability of different measurement methods was investigated. Different methods (body sampling by means of coveralls and patches, hand sampling by means of gloves and washing, and head sampling by means of headbands and wiping) were compared. Volunteers repeatedly performed a selection of tasks under standardized conditions in test chambers to increase the reproducibility and decrease variability. The selected tasks were pouring, rolling, spraying, and handling of objects immersed in liquid formulations, as well as dumping and handling objects contaminated with powder. For the chemical analysis, the surrogate test substance Tinopal SWN was analyzed by means of a high-performance liquid chromatographic method using a fluorescence detector. Tinopal SWN was either applied as a solid product in its pure form, or as a low and high viscosity liquid containing Tinopal SWN in dissolved form. To compare the sampling methods with patches and coveralls, the exposure values as measured on the patches were extrapolated to the surface areas of the respective parts of the coverall. Based on this extrapolation approach, using the patch method resulted in somewhat higher exposure values compared to using a coverall for all exposure situations, but the differences were only statistically significant in case of the liquid exposure situations. Using gloves resulted in significantly higher exposure values compared to hand wash for handling immersed objects, rolling, and handling contaminated objects, and slightly higher (not significant) exposure values during pouring and spraying. In the same context, applying wipe sampling resulted in higher exposure values than using a headband, which was at least partly due to extrapolation of the wipe results to the surface area of the headband. No 'golden standard' with regard to a preferred measurement method for dermal exposure could be identified from the methods as investigated in the current study.

Determination of pesticide dermal transfer to operators and agricultural workers through contact with sprayed hard surfaces.

BACKGROUND: In the present study, the rate of dermal transfer of pesticides to agricultural workers occurring via contact with sprayed hard surfaces was investigated. Cotton gloves were used as dosimeters to collect residues from hard surfaces contaminated by pesticides in greenhouses. Dosimeters, either dry or moistened, were in contact with wood, metal and plastic surfaces that had previously been sprayed. The experimental approach applied mimicked typical hand contact. Moistened cotton gloves were used to simulate hand moisture from dew/condensation or rainfall. The effect of total duration of contact on the final hand exposure via transfer was investigated. RESULTS: The higher duration contact tested (50 s) resulted in higher transfer rates for metal and plastic surfaces; no such effect was noted in the case of the wood surface. The pesticide amount transferred from the metal and plastic surfaces to wet gloves was greater than that transferred to dry gloves. Such a trend was not observed for the wood surface. Transfer rates varied from 0.46 to 77.62% and from 0.17 to 16.90% for wet and dry samples, respectively. CONCLUSION: The current study has generated new data to quantify the proportion of pesticide deposits dislodged from three different non-crop surfaces when in contact with dry or wet gloves. © 2018 Crown copyright. Pest Management Science © 2018 Society of Chemical Industry.

Revisiting Greek Propolis: Chromatographic Analysis and Antioxidant Activity Study.

Propolis is a bee product that has been extensively used in alternative medicine and recently has gained interest on a global scale as an essential ingredient of healthy foods and cosmetics. Propolis is also considered to improve human health and to prevent diseases such as inflammation, heart disease, diabetes and even cancer. However, the claimed effects are anticipated to be correlated to its chemical composition. Since propolis is a natural product, its composition is consequently expected to be variable depending on the local flora alignment. In this work, we present the development of a novel HPLC-PDA-ESI/MS targeted method, used to identify and quantify 59 phenolic compounds in Greek propolis hydroalcoholic extracts. Amongst them, nine phenolic compounds are herein reported for the first time in Greek propolis. Alongside GC-MS complementary analysis was employed, unveiling eight additional newly reported compounds. The antioxidant activity study of the propolis samples verified the potential of these extracts to effectively scavenge radicals, with the extract of Imathia region exhibiting comparable antioxidant activity to that of quercetin.

Organic pollution and its effects in the marine mussel Mytilus galloprovincialis in Eastern Mediterranean coasts.

Persistent chemicals and emerging pollutants are continuously detected in marine waters and biota. Out of these, polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCs) are significant contaminants with decades of presence in the marine environment. The Mediterranean Sea is an ecosystem directly affected by a variety of anthropogenic activities including industry, municipal, touristic, commercial and agricultural. The Mediterranean mussel (Mytilus galloprovincialis) is a filter feeder, which presents wide distribution. In this regard, the specific organism was used as a biological indicator for the monitoring and evaluation of pollution in the studied areas with focus on the mentioned chemical groups. Pristine Turkish sites with minimum effect from anthropogenic activities, in contrast with Greek sites which were subjected to heavy industrial and shipping activity, were selected. A gas chromatographic tandem mass spectrometric method (GC-MS/MS) was developed and validated to monitor 34 compounds (16 EPA priority PAHs and 18 OCs). Analyses of mussel samples in 2011 from sites with the limited anthropogenic pollution shores have shown the occurrence of 11 pollutants (6 PAHs, 5 OCs), while in the samples from sites with intensive activity and expected pollution, 12 PAHs and 6 OCs were detected. Biochemical and biological responses studied only in mussels samples from the sites with the highest contamination showed a situation that was under strong seasonal influence. The intensity of the response was also influenced by deployment duration. Noteworthy correlations were detected among biochemical/biological effects and between mussel body burden and these effects. Continuous monitoring of priority pollutants of East Mediterranean Sea is vital both for ecological and human risk assessment purposes.

Pesticide residues in honeybees, honey and bee pollen by LC-MS/MS screening: reported death incidents in honeybees.

The aim of this study was to investigate reported cases of honeybee death incidents with regard to the potential interrelation to the exposure to pesticides. Thus honeybee, bee pollen and honey samples from different areas of Greece were analyzed for the presence of pesticide residues. In this context an LC-ESI-MS/MS multiresidue method of total 115 analytes of different chemical classes such as neonicotinoids, organophosphates, triazoles, carbamates, dicarboximides and dinitroanilines in honeybee bodies, honey and bee pollen was developed and validated. The method presents good linearity over the ranges assayed with correlation coefficient values r(2)≥0.99, recoveries ranging for all matrices from 59 to 117% and precision (RSD%) values ranging from 4 to 27%. LOD and LOQ values ranged - for honeybees, honey and bee pollen - from 0.03 to 23.3 ng/g matrix weight and 0.1 up to 78 ng/g matrix weight, respectively. Therefore this method is sufficient to act as a monitoring tool for the determination of pesticide residues in cases of suspected honeybee poisoning incidents. From the analysis of the samples the presence of 14 active substances was observed in all matrices with concentrations ranging for honeybees from 0.3 to 81.5 ng/g, for bee pollen from 6.1 to 1273 ng/g and for honey one sample was positive to carbendazim at 1.6 ng/g. The latter confirmed the presence of such type of compounds in honeybee body and apicultural products.