Facile analysis of mycotoxin in coffee and tea samples using a novel semi-automated in-syringe based fast mycotoxin extraction (FaMEx) technique coupled with direct-injection ESI-MS/MS analysis.

Identifying the risk of ochratoxin A in our daily food has become fundamental because of its toxicity. In this work, we report a novel semi-automated in-syringe-based fast mycotoxin extraction (IS-FaMEx) technique coupled with direct-injection electrospray-ionization tandem mass spectrometer (ESI-MS/MS) detection for the quantification of ochratoxin A in coffee and tea samples. Under the optimized conditions, the results reveal that the developed method's linearity was more remarkable, with a correlation coefficient of > 0.999 and > 92% extraction recovery with a precision of 6%. The detection and quantification limits for ochratoxin A were 0.2 and 0.8 ng g-1 for the developed method, respectively, which is lower than the European Union regulatory limit of toxicity for ochratoxin-A (5 ng g-1) in coffee. Furthermore, the newly developed modified IS-FaMEx-ESI-MS/MS exhibited lower signal suppression of 8% with a good green metric score of 0.64. In addition, the IS-FaMEx-ESI-MS/MS showed good extraction recovery, matrix elimination, good detection, and quantification limits with high accuracy and precision due to the fewer extraction steps with semi-automation. Therefore, the presented method can be applied as a potential methodology for the detection of mycotoxins in food products for food safety and quality control purposes. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05733-z.

Ultra-sensitive determination of Ochratoxin A in coffee and tea samples using a novel semi-automated in-syringe based coagulant-assisted fast mycotoxin extraction (FaMEx) technique coupled with UHPLC-MS/MS.

In this study, we demonstrated a novel semi-automated in-syringe-based coagulant-assisted liquid-liquid microextraction (IS-CGA-LLME) as fast mycotoxin extraction (FaMEx) technique coupled with ultra-high-performance liquid chromatography connected with a tandem-mass spectrometer (UHPLC-MS/MS) for the quantification of mycotoxin (Ochratoxin A, OT-A) in coffee and tea samples. IS-CGA-LLME is a three-step extraction process that includes extraction of OT-A from sample matrix using low-volume solvent extraction, then the extractant was cleaned-up using a coagulation process, and finally, the decolorized/matrix removed sample solution was processed for LLME for target analyte's pre-concentration. The final extractant was analyzed using UHPLC-MS/MS for OT-A quantification. Under the optimized experimental conditions, highly sensitive detection and quantification limits were obtained at 0.001 and 0.003 ng g-1 for OT-A with excellent extraction recovery (93-111%) and precision <10%. These results proved that the developed method is a simple, highly sensitive, semi-automated, low-matrix effect and efficient procedure for the determination of mycotoxins in food samples.

Rapid Identification and Analysis of Ochratoxin-A in Food and Agricultural Soil Samples Using a Novel Semi-Automated In-Syringe Based Fast Mycotoxin Extraction (FaMEx) Technique Coupled with UHPLC-MS/MS.

In this work, a fast mycotoxin extraction (FaMEx) technique was developed for the rapid identification and quantification of carcinogenic ochratoxin-A (OTA) in food (coffee and tea) and agricultural soil samples using ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) detection. The FaMEx technique advancement is based on two plastic syringes integrated setup for rapid extraction and its subsequent controlled clean-up process. In the extraction process, a 0.25-g sample and extraction solvent were added to the first syringe barrel for the vortex-based extraction. Then, the extraction syringe was connected to a clean-up syringe (pre-packed with C18, activated carbon, and MgSO4) with a syringe filter. Afterward, the whole set-up was placed in an automated programmable mechanical set-up for controlled elution. To enhance FaMEx technology performance, the various influencing sample pretreatment parameters were optimized. Furthermore, the developed FaMEx method indicated excellent linearity (0.9998 and 0.9996 for coffee/tea and soil) with highly sensitive detection (0.30 and 0.29 ng/mL for coffee/tea and soil) and quantification limits (1.0 and 0.96 for coffee/tea and soil), which is lower than the toxicity limit compliant with the European Union regulation for OTA (5 ng/g). The method showed acceptable relative recovery (84.48 to 100.59%) with <7.34% of relative standard deviation for evaluated real samples, and the matrix effects were calculated as <-13.77% for coffee/tea and -9.7 for soil samples. The obtained results revealed that the developed semi-automated FaMEx/UHPLC-MS/MS technique is easy, fast, low-cost, sensitive, and precise for mycotoxin detection in food and environmental samples.

A low-cost eco-friendly fast drug extraction (FaDEx) technique for environmental and bio-monitoring of psychoactive drug in urban water and sports-persons' urine samples.

Nicotine is the most prominent psychoactive/addictive chemical substance consumed worldwide among young players in team sports. Moreover, urinary nicotine discharge and nicotine-based products disposal in environmental waters has been unavoidable in recent years. Therefore, sensitive monitoring of nicotine content in environmental waters and human urine samples is essential. In this study, we developed a miniaturized novel green, low-cost, sensitive, in-syringe-based semi-automated fast drug extraction (FaDEx) protocol coupled with gas chromatography-flame ionization detection (GC-FID) for the efficient environmental and bio-monitoring of nicotine in aqueous samples. The FaDEx method consists of two steps; firstly, the target analyte was extracted using dimethyl carbonate (a green solvent) and extraction salts. After that, the extraction solvent was passed automatically through the solid-phase extraction cartridge at a constant flow rate for the cleanup process to achieve the sensitive nicotine analysis by GC-FID. Under optimized experimental conditions, the developed method showed excellent linearity over the concentration ranges between 20-2000 ng mL-1 with a correlation coefficient >0.99. The detection and quantification limits were 4 and 20 ng mL-1, respectively. The presented method was applied to monitor and assess nicotine exposure in sports-persons' urine and environmental water samples. The method accuracy and precision in terms of relative recovery and relative standard deviation (for triplicate analysis) were 85.4-110.2% and ≤8%, respectively. Finally, the impact of our procedure on the environment from a green analytical chemistry view was assessed using a novel metric system called AGREE, and obtained the greenness score of 0.87, indicating its an efficient alternative green analytical protocol for routine environmental and bio-monitoring of nicotine in environmental and biological samples.

Novel fast pesticides extraction (FaPEx) strategy coupled with UHPLC-MS/MS for rapid monitoring of emerging pollutant fipronil and its metabolite in food and environmental samples.

In this work, we demonstrated a new, environmental-friendly and effective sample preparation strategy named 'in-syringe-assisted fast pesticides extraction (FaPEx)' technique coupled with LC-MS/MS for the rapid identification and monitoring of emerging pollutant fipronil and its metabolite fipronil sulfone in chicken egg and environmental soil samples. FaPEx strategy comprising of two simple steps. Firstly, the sample was placed in the syringe and extracted using low-volume acetonitrile with NaCl and anhydrous MgSO4 salts. Secondly, the extractant was passed through in-syringe-based solid-phase extraction (SPE) kit containing cleanup sorbents and salt combinations (C18, primary secondary amine, and anhydrous MgSO4) for the cleanup process. Then, the obtained clean extractant was injected into LC-MS/MS for the quantification of target analytes. Various important parameters influencing the FaPEx performances, such as solvent type, salt type, salt amount, sorbent type, and amount, were examined and optimized. The method validation results showed excellent linearity with high correlation coefficients were ≥ 0.99. The estimated LODs were between 0.05-0.07 µg/kg, and LOQs ranged between 0.1-0.25 µg/kg for target analytes in both egg and soil sample matrices, and precision values were ≤7.90%. The developed method was applied to commercial chicken egg samples and environmental soil samples analysis. Spiked recoveries ranged between 88.75-110.91% for egg samples with RSDs ≤7.42% and 82.47-107.46% for soil samples with RSDs <7.37%. These results proved that the developed sample preparation method is a simple, fast, green, low-cost, and efficient method for the analysis of fipronil and its metabolites in food and environmental samples. Thus, this method can be applied as an alternative analytical methodology in routine and standard food and environmental testing laboratories.

Sustainable approaches on industrial food wastes to value-added products - A review on extraction methods, characterizations, and its biomedical applications.

The concept of zero waste discharge has been gaining importance in recent years towards attaining a sustainable environment. Fruit processing industries generate millions of tons of byproducts like fruit peels and seeds, and their disposal poses an environmental threat. The concept of extracting value-added bioactive compounds from bio-waste is an excellent opportunity to mitigate environmental issues. To date, significant research has been carried out on the extraction of essential biomolecules, particularly polysaccharides from waste generated by fruit processing industries. In this review article, we aim to summarize the different extraction methodologies, characterization methods, and biomedical applications of polysaccharides extracted from seeds and peels of different fruit sources. The review also focuses on the general scheme of extraction of polysaccharides from fruit waste with special emphasis on various methods used in extraction. Also, the various types of polysaccharides obtained from fruit processing industrial wastes are explained in consonance with the important techniques related to the structural elucidation of polysaccharides obtained from seed and peel waste. The use of seed polysaccharides as pharmaceutical excipients and the application of peel polysaccharides possessing biological activities are also elaborated.

Valorization of nano-based lignocellulosic derivatives to procure commercially significant value-added products for biomedical applications.

Biowaste, produced from nature, is preferred to be a good source of carbon and ligninolytic machinery for many microorganisms. They are complex biopolymers composed of lignin, cellulose, and hemicellulose traces. This biomass can be depolymerized to its nano-dimensions to gain exceptional properties useful in the field of cosmetics, pharmaceuticals, high-strength materials, etc. Nano-sized biomass derivatives overcome the inherent drawbacks of the parent material and offer promises as a potential material for a wide range of applications with their unique traits such as low-toxicity, biocompatibility, biodegradability and environmentally friendly nature with versatility. This review focuses on the production of value-added products feasible from nanocellulose, nano lignin, and xylan nanoparticles which is quite a novel study of its kind. Dawn of nanotechnology has converted bio waste by-products (hemicellulose and lignin) into useful precursors for many commercial products. Nano-cellulose has been employed in the fields of electronics, cosmetics, drug delivery, scaffolds, fillers, packaging, and engineering structures. Xylan nanoparticles and nano lignin have numerous applications as stabilizers, additives, textiles, adhesives, emulsifiers, and prodrugs for many polyphenols with an encapsulation efficiency of 50%. This study will support the potential development of composites for emerging applications in all aspects of interest and open up novel paths for multifunctional biomaterials in nano-dimensions for cosmetic, drug carrier, and clinical applications.

Synthesis and Characterization of High Viscosity Cationic Poly(Proline-Epichlorohydrin) Composite Polymer with Antibacterial Functionalities.

We report microbial resistance and catalytic activity of high viscosity cationic poly(proline-epichlorohydrin) composite (PRO-EPI) in the aqueous system. The PRO-EPI was prepared by a simple polycondensation, followed by FTIR, 1H NMR, SEM, DLS, viscosity, and DSC/TGA characterization. Several concentrations of the PRO-EPI were tested against Gram-negative (E. coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) microorganisms. The antimicrobial screening revealed that PRO-EPI was a potent antimicrobial agent with the least inhibitory concentrations (MICs) of 128 µg/mL against Gram-negative microorganisms. The PRO-EPI indicated no inhibitory effect against Gram-positive microorganisms. It was determined that PRO-EPI contains polymeric-quaternary ammonium compounds that inactivate the Gram-negative microorganisms by a dual mode of action and carries domains for electrostatic interaction with the microbial membrane and an intracellular target. To study the removal of toxic industrial wastewater, congo red (CR) was tested using sodium borohydride as a reducing agent. Adsorption was achieved within 20 min at a rate constant of 0.92 ks-1. UV-vis spectra showed that the removal of CR in the reaction solution was due to the breakup of the azo (-N=N-) bonds and adsorption of aromatic fragments. PRO is biodegradable and non-toxic, and PRO-EPI was found to be both antimicrobial and also acts as a catalyst for the removal of congo red dye.

Power density modulated ultrasonic degradation of perfluoroalkyl substances with and without sparging Argon.

The power density modulates the dynamics of the chemical reactions during the ultrasonic breakdown of organic compounds. We evaluated the ultrasonic degradation of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) at various power densities (30 W/L-262 W/L) with and without sparging Argon. We observed pseudo-first-order degradation kinetics at an initial PFASs concentration of 100 nM over a range of power density. The rate kinetics of degradation shows a non-linear increase with an increase in power density. We proposed a four-parameter logistic regression (4PLR) equation that empirically fits the degradation rate kinetics with the power density. The 4PLR equation predicts that the maximum achievable half-life of PFOA and PFOS sonochemical degradation are 1 and 10 min under a given set of experimental conditions. The high bulk-water temperature (i.e., 30 °C) of the aqueous sample helps increase the degradation rate of PFOA and PFOS. The addition of oxidants such as iodate and chlorate help enhance PFOA degradation in an argon environment at an ultrasonic frequency of 575 kHz.

Kinetic model for sonolytic degradation of non-volatile surfactants: Perfluoroalkyl substances.

Sonolytic degradation kinetics of non-volatile surfactant perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) were investigated over a range of concentration, considering active cavity as a catalyst. The Michaelis-Menten type kinetic model was developed to empirically estimate the concentration of active cavity sites during reactions. Sonolytic degradation of PFOA and PFOS, as well as the formation of its inorganic constituents, fluoride, and sulfate, follows saturation kinetics of pseudo-first order at lower concentration (<2.34 µM) and zero order at higher concentration (>23.60 µM). Nitrate and hydrogen peroxide formations were 0.53 ±â€¯0.14 µM/min and 0.95 ±â€¯0.11 µM/min, respectively. At a power density of 77 W/L and frequency of 575 kHz, the empirically estimated maximum number of active cavity sites that could lead to the sonolytic reaction were 89.25 and 8.8 mM for PFOA and PFOS, respectively. This study suggests that a lower number of active cavity sites with higher temperature needed to degrade PFOS might be the reason for lower degradation rate of PFOS compared to that of PFOA. Diffusion of non-volatile surfactants at the cavity-water interface is found to be the rate-limiting step for the mineralization of perfluoroalkyl substances.

Plastic toys as a source of exposure to bisphenol-A and phthalates at childcare facilities.

Infants and toddlers are constantly exposed to toys at childcare facilities. Toys are made of a variety of plastics that often use endocrine-disrupting chemicals such as bisphenol-A (BPA) and phthalates as their building blocks. The goal of this study was to assess the non-dietary exposure of infants and toddlers to BPA and phthalates via leaching. We have successfully developed wipe tests to evaluate the leachability of BPA and phthalates from toys used at several day care facilities in Philadelphia. Our studies have shown an average leaching of 13-280 ng/cm2 of BPA and phthalates. An estimate of total exposure of infants to BPA and phthalates is reported. The leaching of the chemicals was observed to be dependent on the washing procedures and the location of the day care facilities. Using bleach/water mixture two or more times a week to clean the toys seems to reduce the leaching of chemicals from the toys. There is a huge data gap in the estimated intake amounts and reported urinary concentrations; this is the first study that provides valuable information to address these data gaps in the existing literature.

Steroid hormones in environmental matrices: extraction method comparison.

The U.S. Environmental Protection Agency (EPA) has developed methods for the analysis of steroid hormones in water, soil, sediment, and municipal biosolids by HRGC/HRMS (EPA Method 1698). Following the guidelines provided in US-EPA Method 1698, the extraction methods were validated with reagent water and applied to municipal wastewater, surface water, and municipal biosolids using GC/MS/MS for the analysis of nine most commonly detected steroid hormones. This is the first reported comparison of the separatory funnel extraction (SFE), continuous liquid-liquid extraction (CLLE), and Soxhlet extraction methods developed by the U.S. EPA. Furthermore, a solid phase extraction (SPE) method was also developed in-house for the extraction of steroid hormones from aquatic environmental samples. This study provides valuable information regarding the robustness of the different extraction methods. Statistical analysis of the data showed that SPE-based methods provided better recovery efficiencies and lower variability of the steroid hormones followed by SFE. The analytical methods developed in-house for extraction of biosolids showed a wide recovery range; however, the variability was low (≤ 7% RSD). Soxhlet extraction and CLLE are lengthy procedures and have been shown to provide highly variably recovery efficiencies. The results of this study are guidance for better sample preparation strategies in analytical methods for steroid hormone analysis, and SPE adds to the choice in environmental sample analysis.

Evaluation of relative importance of ultrasound reactor parameters for the removal of estrogen hormones in water.

The growing interest in sonochemistry as a tool for environmental remediation leads to the need for process optimization. Sonochemistry is a complex process, which depends on physical parameters and also on the process conditions. Physical parameters are interrelated and therefore a systematic approach has to be taken to optimize the process. The effect of physical parameters on the destruction of seven estrogen hormones (17α-estradiol, 17ß-estradiol, estriol, 17α-ethinylestradiol, 17α-dihydroequilin, estrone and equilin) is reported in this study. Artificial neural networks (ANN) was used as a tool to identify the correlations between these process parameters. ANN enabled the establishment of relationship between sonication parameters such as power density, power intensity, ultrasound amplitude, as well as the reactor design parameters. The major significance was attributed to the area-specific power density and the volume-specific power intensity. The results of this work provide a sound basis to design pilot and full-scale ultrasound treatment systems. Process optimization lead to a 5-fold decrease in energy consumption as compared to the commercially available reactors, thereby making the process attractive for field applications.

Occurrence of estrogen hormones in biosolids, animal manure and mushroom compost.

The presence of natural estrogen hormones as trace concentrations in the environment has been reported by many researchers and is of growing concern due to its possible adverse effects on the ecosystem. In this study, municipal biosolids, poultry manure (PM) and cow manure (CM), and spent mushroom compost (SMC) were analyzed for the presence of seven estrogen hormones. 17α-estradiol, 17ß-estradiol, 17α-dihydroequilin, and estrone were detected in the sampled biosolids and manures at concentrations ranging from 6 to 462 ng/g of dry solids. 17α-estradiol, 17ß-estradiol, and estrone were also detected in SMC at concentrations ranging from 4 to 28 ng/g of dry solids. Desorption experiments were simulated in the laboratory using deionized water (milli-Q), and the aqueous phase was examined for the presence of estrogen hormones to determine their desorption potential. Very low desorption of 0.4% and 0.2% estrogen hormones was observed from municipal biosolids and SMC, respectively. An estimate of total estrogen contribution from different solid waste sources is reported. Animal manures (PM and CM) contribute to a significant load of estrogen hormones in the natural environment.