Gigantic Anisotropy of Self-Induced Spin-Orbit Torque in Weyl Ferromagnet Co2MnGa.

Spin-orbit torque (SOT) is receiving tremendous attention from both fundamental and application-oriented aspects. Co2MnGa, a Weyl ferromagnet that is in a class of topological quantum materials, possesses cubic-based high structural symmetry, the L21 crystal ordering, which should be incapable of hosting anisotropic SOT in conventional understanding. Here we show the discovery of a gigantic anisotropy of self-induced SOT in Co2MnGa. The magnitude of the SOT is comparable to that of heavy metal/ferromagnet bilayer systems, despite the high inversion symmetry of the Co2MnGa structure. More surprisingly, a sign inversion of the self-induced SOT is observed for different crystal axes. This finding stems from the interplay of the topological nature of the electronic states and their strong modulation by external strain. Our research enriches the understanding of the physics of self-induced SOT and demonstrates a versatile method for tuning SOT efficiencies in a wide range of materials for topological and spintronic devices.

Ferroic Berry Curvature Dipole in a Topological Crystalline Insulator at Room Temperature.

The physics related to Berry curvature is now a central research topic in condensed matter physics. The Berry curvature dipole (BCD) is a significant and intriguing condensed matter phenomenon that involves inversion symmetry breaking. However, the creation and controllability of BCDs have so far been limited to far below room temperature (RT), and nonvolatile (i.e., ferroic) BCDs have not yet been discovered, hindering further progress in topological physics. In this work, we demonstrate a switchable and nonvolatile BCD effect at RT in a topological crystalline insulator, Pb1-xSnxTe (PST), which is attributed to ferroic distortion. Surprisingly, the magnitude of the ferroic BCD is several orders of magnitude greater than that of the nonferroic BCDs that appear, for example, in transition metal dichalcogenides. The discovery of this ferroic and extraordinarily large BCD in PST could pave the way for further progress in topological materials science and the engineering of novel topological devices.

Observation of large spin conversion anisotropy in bismuth.

While the effective g-factor can be anisotropic due to the spin-orbit interaction (SOI), its existence in solids cannot be simply asserted from a band structure, which hinders progress on studies from such viewpoints. The effective g-factor in bismuth (Bi) is largely anisotropic; especially for holes at T-point, the effective g-factor perpendicular to the trigonal axis is negligibly small (<0.112), whereas the effective g-factor along the trigonal axis is very large (62.7). We clarified in this work that the large anisotropy of effective g-factor gives rise to the large spin conversion anisotropy in Bi from experimental and theoretical approaches. Spin-torque ferromagnetic resonance was applied to estimate the spin conversion efficiency in rhombohedral (110) Bi to be 17 to 27%, which is unlike the negligibly small efficiency in Bi(111). Harmonic Hall measurements support the large spin conversion efficiency in Bi(110). A large spin conversion anisotropy as the clear manifestation of the anisotropy of the effective g-factor is observed. Beyond the emblematic case of Bi, our study unveiled the significance of the effective g-factor anisotropy in condensed-matter physics and can pave a pathway toward establishing novel spin physics under g-factor control.

Modulation of spin-torque ferromagnetic resonance with a nanometer-thick platinum by ionic gating.

The spin Hall effect (SHE) and inverse spin Hall effect (ISHE) have played central roles in modern condensed matter physics especially in spintronics and spin-orbitronics, and much effort has been paid to fundamental and application-oriented research towards the discovery of novel spin-orbit physics and the creation of novel spintronic devices. However, studies on gate-tunability of such spintronics devices have been limited, because most of them are made of metallic materials, where the high bulk carrier densities hinder the tuning of physical properties by gating. Here, we show an experimental demonstration of the gate-tunable spin-orbit torque in Pt/Ni80Fe20 (Py) devices by controlling the SHE using nanometer-thick Pt with low carrier densities and ionic gating. The Gilbert damping parameter of Py and the spin-memory loss at the Pt/Py interface were modulated by ionic gating to Pt, which are compelling results for the successful tuning of spin-orbit interaction in Pt.

Synthetic Rashba spin-orbit system using a silicon metal-oxide semiconductor.

The spin-orbit interaction (SOI), mainly manifesting itself in heavy elements and compound materials, has been attracting much attention as a means of manipulating and/or converting a spin degree of freedom. Here, we show that a Si metal-oxide- semiconductor (MOS) heterostructure possesses Rashba-type SOI, although Si is a light element and has lattice inversion symmetry resulting in inherently negligible SOI in bulk form. When a strong gate electric field is applied to the Si MOS, we observe spin lifetime anisotropy of propagating spins in the Si through the formation of an emergent effective magnetic field due to the SOI. Furthermore, the Rashba parameter α in the system increases linearly up to 9.8 × 10-16 eV m for a gate electric field of 0.5 V nm-1; that is, it is gate tuneable and the spin splitting of 0.6 µeV is relatively large. Our finding establishes a family of spin-orbit systems.

Detection of ferromagnetic resonance from 1 nm-thick Co.

To explore the further possibilities of nanometer-thick ferromagnetic films (ultrathin ferromagnetic films), we investigated the ferromagnetic resonance (FMR) of 1 nm-thick Co film. Whilst an FMR signal was not observed for the Co film grown on a SiO2 substrate, the insertion of a 3 nm-thick amorphous Ta buffer layer beneath the Co enabled the detection of a salient FMR signal, which was attributed to the smooth surface of the amorphous Ta. This result implies the excitation of FMR in an ultrathin ferromagnetic film, which can pave the way to controlling magnons in ultrathin ferromagnetic films.

Spin transport in a lateral spin valve with a suspended Cu channel.

We study spin transport through a suspended Cu channel by an electrical non-local 4-terminal measurement for future spin mechanics applications. A magnetoresistance due to spin transport through the suspended Cu channel is observed, and its magnitude is comparable to that of a conventional fixed Cu lateral spin valve. The spin diffusion length in the suspended Cu channel is estimated to be 340 nm at room temperature from the spin signal dependence on the distance between the ferromagnetic injector and detector electrodes. This value is found to be slightly shorter than in a fixed Cu. The decrease in the spin diffusion length in the suspended Cu channel is attributed to an increase in spin scattering originating from naturally oxidized Cu at the bottom of the Cu channel.

Tunable inverse spin Hall effect in nanometer-thick platinum films by ionic gating.

Electric gating can strongly modulate a wide variety of physical properties in semiconductors and insulators, such as significant changes of conductivity in silicon, appearance of superconductivity in SrTiO3, the paramagnet-ferromagnet transition in (In,Mn)As, and so on. The key to such modulation is charge accumulation in solids. Thus, it has been believed that such modulation is out of reach for conventional metals where the number of carriers is too large. However, success in tuning the Curie temperature of ultrathin cobalt gave hope of finally achieving such a degree of control even in metallic materials. Here, we show reversible modulation of up to two orders of magnitude of the inverse spin Hall effect-a phenomenon that governs interconversion between spin and charge currents-in ultrathin platinum. Spin-to-charge conversion enables the generation and use of electric and spin currents in the same device, which is crucial for the future of spintronics and electronics.

Determination of the absolute configuration of compounds bearing chiral quaternary carbon centers using the crystalline sponge method.

Determination of the absolute configuration of chiral tetra-substituted carbon centers is one of the most taxing steps in the enantioselective construction of this structural motif in asymmetric synthesis. Here, we demonstrate that the crystalline sponge method provides an effective way to crystallographically determine the absolute configuration of organic compounds bearing chiral quaternary carbons (including tetra-substituted ones) that are synthesized by recently developed enantioselective catalytic reactions.

Strong evidence for d-electron spin transport at room temperature at a LaAlO3/SrTiO3 interface.

A d-orbital electron has an anisotropic electron orbital and is a source of magnetism. The realization of a two-dimensional electron gas (2DEG) embedded at a LaAlO3/SrTiO3 interface surprised researchers in materials and physical sciences because the 2DEG consists of 3d-electrons of Ti with extraordinarily large carrier mobility, even in the insulating oxide heterostructure. To date, a wide variety of physical phenomena, such as ferromagnetism and the quantum Hall effect, have been discovered in this 2DEG system, demonstrating the ability of d-electron 2DEG systems to provide a material platform for the study of interesting physics. However, because of both ferromagnetism and the Rashba field, long-range spin transport and the exploitation of spintronics functions have been believed difficult to implement in d-electron 2DEG systems. Here, we report the experimental demonstration of room-temperature spin transport in a d-electron-based 2DEG at a LaAlO3/SrTiO3 interface, where the spin relaxation length is about 300 nm. Our finding, which counters the conventional understandings of d-electron 2DEGs, highlights the spin-functionality of conductive oxide systems and opens the field of d-electron spintronics.

Electrical detection of the spin polarization due to charge flow in the surface state of the topological insulator Bi(1.5)Sb(0.5)Te(1.7)Se(1.3).

We detected the spin polarization due to charge flow in the spin nondegenerate surface state of a three-dimensional topological insulator by means of an all-electrical method. The charge current in the bulk-insulating topological insulator Bi1.5Sb0.5Te1.7Se1.3 (BSTS) was injected/extracted through a ferromagnetic electrode made of Ni80Fe20, and an unusual current-direction-dependent magnetoresistance gave evidence for the appearance of spin polarization, which leads to a spin-dependent resistance at the BSTS/Ni80Fe20 interface. In contrast, our control experiment on Bi2Se3 gave null result. These observations demonstrate the importance of the Fermi-level control for the electrical detection of the spin polarization in topological insulators.

Asymmetric substitution at the tetrasubstituted chiral carbon: catalytic ring-opening alkylation of racemic 2,2-disubstituted aziridines with 3-substituted oxindoles.

A highly diastereo- and enantioselective ring-opening alkylation of racemic 2,2-disubstituted aziridines with 3-substituted oxindoles is achieved under the catalysis of a chiral 1,2,3-triazolium salt. This reaction represents a hitherto unknown, catalytic stereoselective carbon-carbon bond formation through direct substitution at the tetrasubstituted chiral carbon.

Mutation screening and haplotype analysis of the rhodopsin gene locus in Japanese patients with retinitis pigmentosa.

PURPOSE: To identify nucleotide sequence variations in the rhodopsin (RHO) gene of Japanese patients with retinitis pigmentosa (RP) in order to search for mutations or haplotypes responsible for RP. METHODS: The entire region of RHO locus including a promoter region and introns was sequenced using blood-derived genomic DNA samples donated by 68 patients with RP and 68 control subjects. RESULTS: We found 39 single nucleotide substitutions including 17 rare substitutions of less than 1% in frequency, one insertion/deletion polymorphism, and one CA-repeat polymorphism in a 7.8 kbp region spanning the promoter, five exons, and four introns of the RHO gene locus. There were no affected subjects with amino acid substitutions in RHO, and there was 1 control subject with a novel substitution (Ala42Thr) who had no symptoms of RP. Fine analysis of single nucleotide polymorphism (SNPs) revealed eight haplotype structures of the Japanese RHO locus. There was no significant difference between RP patients and controls in terms of haplotype frequency. CONCLUSIONS: No mutation causing an amino acid substitution of RHO was observed in 68 Japanese patients with RP, but 1 control subject did have a novel amino acid substitution. The Japanese RHO locus is comprised of eight major haplotypes. The RP-associated haplotype was not identified. The haplotype-tagging SNPs identified in this study will be useful as markers for the linkage-based screening of RP patients.

"Beak"-plasty: a new effective modification of Z-plasty.

BACKGROUND: Because the "lateral limbs" resulting from conventional Z-plasty form a steep angle against the relaxation skin tension line (RSTL), they often develop hypertrophic change, whereas the "central limbs" become inconspicuous after being realigned parallel to the RSTL. OBJECTIVE: To alleviate the above-mentioned hypertrophic change of the lateral limbs, we modified the conventional Z-plasty and invented a new technique. Because the shape of the flap resembles a bird's beak, we call the technique "beak-plasty." The purpose of this study is to present the new technique. METHODS: The technique is described and effectiveness of the technique is reviewed on 21 patients. In particular, three representative cases are presented with photographs. RESULTS: In all patients, the lateral limbs of the flaps did not become hypertrophic after a minimum follow-up period of 9 months. CONCLUSIONS: Our technique can effectively reduce Z-plasty's risk of postoperative hypertrophy in the lateral limb. Therefore, it can make the scar less conspicuous than in conventional Z-plasty. For this advantage, we recommend our technique as an effective armament for scar revision. The authors have indicated no significant interest with commercial supporters.