Fate of Emerging Contaminants in High-Rate Activated Sludge Systems.

High-rate activated sludge (HRAS) systems are designed to shift the energy-intensive processes to energy-saving and sustainable technologies for wastewater treatment. The high food-to-microorganism (F/M) ratios and low solid retention times (SRTs) and hydraulic retention times (HRTs) applied in HRAS systems result in the maximization of organic matter diversion to the sludge which can produce large amounts of biogas during anaerobic digestion, thus moving toward energy-neutral (or positive) treatment processes. However, in addition to the energy optimization, the removal of emerging contaminants (ECs) is the new challenge in wastewater treatment. In the context of this study, the removal efficiencies and the fates of selected ECs (three endocrine disruptors (endocrine disrupting chemicals (EDCs))-nonylphenol, bisphenol A and triclosan, and four pharmaceuticals (PhACs)-ibuprofen, naproxen, diclofenac and ketoprofen) in HRAS systems have been studied. According to the results, EDCs occurred in raw wastewater and secondary sludge at higher concentrations compared to PhACs. In HRAS operating schemes, all compounds were poorly (<40%) to moderately (<60%) removed. Regarding removal mechanisms, biotransformation was found to be the dominant process for PhACs, while for EDCs sorption onto sludge is the most significant removal mechanism affecting their fates and their presence in excess sludge.

A hypothesis on Microthrix parvicella proliferation in biological nutrient removal activated sludge systems with selector tanks.

The objective of this study was to evaluate the ability of Microthrix parvicella for long-chain fatty acids uptake under anaerobic, anoxic, and aerobic conditions as well as its ability to utilize volatile fatty acids and long-chain fatty acids under anoxic and aerobic conditions. According to the results, a hypothesis on the competition between floc-forming microorganisms and M. parvicella for long-chain fatty acids uptake under aerobic, anoxic, and anaerobic conditions was formulated. According to this hypothesis, M. parvicella exhibits similar long-chain fatty acids uptake capacity with floc-forming microorganisms even at relatively high floc loading values that are very often imposed at selector tanks. Following this hypothesis, the failure of selector tanks to provide for an effective M. parvicella control is evidenced. Based on the experimental results, the ability of M. parvicella to utilize long-chain fatty acids with rates comparable to those of floc formers, even in anoxic conditions, in conjunction with its lower acetate utilization rates, provides a good explanation regarding its preference to slowly biodegradable organic carbon compounds.

Investigation of long-term operation and biomass activity in a membrane bioreactor system.

The aim of this work was to evaluate the long-term performance of a Membrane Bioreactor (MBR) that operated continuously for 2.5 years and to assess membrane fouling and biomass activity under various operating conditions. Furthermore, a method for the characterisation of influent wastewater was developed based on its separation into various fractions. The MBR system operated at the solids retention times (SRT) of 10, 15, 20 and 33 days. The increase of SRT resulted in a decrease of the fouling rate associated with the reduction of extracellular polymeric substances. Moreover, the SRT increase resulted in a significant reduction of the Oxygen Uptake Rate (OUR) due to the lower availability of substrate and in a notable decrease of the maximum OUR since high SRT allowed the development of slower growing microorganisms. Biomass consisted of small flocs due to extensive deflocculation caused by intense aeration. Finally, the method developed for wastewater characterisation is straightforward and less time consuming than the usual method that is employed.

Fractionation of proteins and carbohydrates of extracellular polymeric substances in a membrane bioreactor system.

The major operational problem associated with membrane bioreactors (MBR) is membrane fouling, for which extracellular polymeric substances (EPS) are primarily responsible. In this work both the soluble and bound EPS (i.e. SMP and EPS) produced in an MBR system operating under sludge retention times (SRT) of 10, 15, 20 and 33 days were fractionized by means of membranes having variable molecular weight cutoffs (300 kDa, 100 kDa, 10 kDa & 1 kDa). The results show that increasing the SRT leads to a reduction of SMP and EPS and that these reductions are more pronounced for the SRTs in the range 10-20 days. This reduction is more significant for carbohydrates than for proteins. The decrease of SMP and EPS with increasing SRT from 10 to 20 days led to a significant decrease of the level of fouling. The further increase of SRT to 33 days did not significantly impact on the level of fouling as the SMP and EPS concentrations did not change much. Under the examined operating conditions, EPS were found to be composed mainly of large macromolecules having a size of 0.45 microm-300 kDa and to a lower extent of very small molecules (<1 kDa) that are not easily decomposed by the biomass activity. The majority of SMP is composed of very small molecules (<1 kDa), while some macromolecules in the range of 0.45 microm-300 kDa are present. Consequently, both EPS and SMP were found to have a bimodal character.

Comparison of bioluminescence and nitrification inhibition methods for assessing toxicity to municipal activated sludge.

The aim of this study was to compare two alternative toxicity assessment methods to determine wastewater toxicity and predict treatment plant process upsets. The toxicity of two synthetic organic compounds (triclosan and 4-n-nonylphenol), which are commonly detected in municipal wastewater, and municipal and industrial wastewaters with different heavy metals content were evaluated by the nitrification inhibition assay and bioluminescence toxicity test. Comparison between both assays confirmed that Vibrio fischeri is generally more sensitive than autotrophic bacteria, and, if not calibrated, the bioluminescence method tends to overestimate toxic effects on activated sludge biomass. The nitrification inhibition assay appears to predict plant process upsets more accurately. Both methods showed a significant toxicity decrease through treatment that could be partially attributed to the significant heavy metals removal obtained by primary and secondary treatment. A good correlation for the two assays was obtained, as indicated by a high correlation coefficient (r2 = 0.80).