RESUMO
We describe the synthesis and properties of Zn3[(Zn4Cl)3(BTT)8]2 (ZnZnBTT, BTT3- = 1,3,5-benzenetristetrazolate), a heretofore unknown member of a well-known, extensive family of metal-organic frameworks (MOFs) with the general formula MII3[(MII4Cl)3(BTT)8]2, which adopts an anionic, sodalite-like structure. As with previous members in this family, ZnZnBTT presents two crystallographically distinct metal cations: a skeletal Zn2+ site, fixed within Zn4Cl(tetrazole)8 secondary building units (SBUs), and a charge-balancing Zn2+ site. Self-assembly of ZnZnBTT from its building blocks has remained elusive; instead, we show that ZnZnBTT is readily accessed by quantitative postsynthetic exchange of all Mn2+ ions in MnMnBTT with zinc. We further demonstrate that ZnZnBTT is a promising Zn-ion conductor owing to the mobile charge-balancing extra-framework Zn2+ cations. The new material displays a Zn-ion conductivity of σ = 1.15 × 10-4 S/cm at room temperature and a relatively low activation energy of Ea = 0.317 eV, enabling potential applications in the emerging field of quasi-solid-state zinc-ion batteries.
RESUMO
Stereoactive electron lone pairs derived from filled 5/6s2 states of p-block cations are an intriguing electronic and geometric structure motif that have been exploited for diverse applications such as thermoelectrics, thermochromics, photocatalysis, and nonlinear optics. Layered trivanadates are dynamic intercalation hosts, where the insertion of cations can be used to tune electron correlation, charge localization, and magnetic ordering. However, the interaction of 5/6s2 stereoactive electron lone pairs with layered trivanadates remains unexplored. In this study, we contrast s- and p-block trivanadates and map off-centering in the coordination environment and reduction in symmetry arising from the stereochemical activity of lone pair cations to the emergence of filled antibonding lone-pair 6s2-O 2p hybridized states. The former is studied by high-resolution single-crystal X-ray diffraction studies of TlV3O8 and isostructural RbV3O8 to probe distinct differences in Tl and Rb coordination environments and the resulting modulation of V-V interactions in V3O8 slabs. The latter has been probed by variable-energy hard X-ray photoelectron spectroscopy (HAXPES) measurements, which manifest orbital-specific contributions from bonding and antibonding interactions of stereoactive Tl 6s2 electron lone pairs in TlV3O8. The spectroscopic assignment of valence band states to stereoactive lone pairs is further corroborated by first-principles electronic structure calculations, crystal orbital Hamilton population analyses, and electron localization function maps. The presence of the Tl 6s2 electron lone pair in TlV3O8 brings about the off-centering of Tl+ cations, which leads to anisotropy in Tl-O bonds. The off-centering of Tl ions weakens V-O bonds in one direction, which subsequently strengthens directional V-V coupling. Magnetic measurements reveal ferromagnetic signatures for both RbV3O8 and TlV3O8. However, the differences in V···V interactions significantly affect the energy balance of the superexchange interactions, resulting in an ordering temperature of 140 K for TlV3O8 as compared to 125 K for RbV3O8. The results demonstrate the distinctive effects of stereochemically active lone pairs in modifying electronic structure near the Fermi level and for mediating superexchange interactions.
RESUMO
Phosphane, PH3 -a highly pyrophoric and toxic gas-is frequently contaminated with H2 and P2 H4 , which makes its handling even more dangerous. The inexpensive metal-organic framework (MOF) magnesium formate, α-[Mg(O2 CH)2 ], can adsorb up to 10â wt % of PH3 . The PH3 -loaded MOF, PH3 @α-[Mg(O2 CH)2 ], is a non-pyrophoric, recoverable material that even allows brief handling in air, thereby minimizing the hazards associated with the handling and transport of phosphane. α-[Mg(O2 CH)2 ] further plays a critical role in purifying PH3 from H2 and P2 H4 : at 25 °C, H2 passes through the MOF channels without adsorption, whereas PH3 adsorbs readily and only slowly desorbs under a flow of inert gas (complete desorption time≈6â h). Diphosphane, P2 H4 , is strongly adsorbed and trapped within the MOF for at least 4â months. P2 H4 @α-[Mg(O2 CH)2 ] itself is not pyrophoric and is air- and light-stable at room temperature.
RESUMO
The 5/6s2 lone-pair electrons of p-block cations in their lower oxidation states are a versatile electronic and geometric structure motif that can underpin lattice anharmonicity and often engender electronic and structural instabilities that underpin the function of active elements in nonlinear optics, thermochromics, thermoelectrics, neuromorphic computing, and photocatalysis. In contrast to periodic solids where lone-pair-bearing cations are part of the structural framework, installing lone-pair-bearing cations in the interstitial sites of intercalation hosts provides a means of a systematically modulating electronic structure through the choice of the group and the period of the inserted cation while preserving the overall framework connectivity. The extent of stereochemical activity and the energy positioning of lone-pair-derived mid-gap states depend on the cation identity, stoichiometry, and strength of anion hybridization. V2O5 polymorphs are versatile insertion hosts that can accommodate a broad range of s-, p-, and d-block cations. However, the insertion of lone-pair-bearing cations remains largely underexplored. In this article, we examine the implications of varying the 6s2 cations situated in interlayer sites between condensed [V4O10]n double layers. Systematic modulations of lattice distortions, electronic structure, and magnetic ordering are observed with increasing strength of stereochemical activity from group 12 to group 14 cations. We compare and contrast p-block-layered MxV2O5 (M = Hg, Tl, and Pb) compounds and map the significance of local off-centering arising from the stereochemical activity of lone-pair cations to the emergence of filled antibonding lone-pair 6s2-O 2p-hybridized mid-gap states mediated by second-order Jahn-Teller distortions. Crystallographic studies of cation coordination environments and the resulting modulation of V-V interactions have been used in conjunction with variable-energy hard X-ray photoelectron spectroscopy measurements, first-principles electronic structure calculations, and crystal orbital Hamilton population analyses to decipher the origins of stereochemical activity. Magnetic susceptibility measurements reveal antiferromagnetic signatures for all the three compounds. However, the differences in V-V interactions significantly affect the energy balance of the superexchange interactions, resulting in an ordering temperature of 160 and 260 K for Hg0.5V2O5 and δ-Tl0.5V2O5, respectively, as compared to 7 K for δ-Pb0.5V2O5. In δ-Pb0.5V2O5, the strong stereochemical activity of electron lone pairs and the resulting electrostatic repulsions enforce superlattice ordering, which strongly modifies the electronic localization patterns along the [V4O10] slabs, resulting in disrupted magnetic ordering and an anomalously low ordering temperature. The results demonstrate a versatile strategy for toggling the stereochemical activity of electron lone pairs to modify the electronic structure near the Fermi level and to mediate superexchange interactions.
RESUMO
The origins of performance degradation in batteries can be traced to atomistic phenomena, accumulated at mesoscale dimensions, and compounded up to the level of electrode architectures. Hyperspectral X-ray spectromicroscopy techniques allow for the mapping of compositional variations, and phase separation across length scales with high spatial and energy resolution. We demonstrate the design of workflows combining singular value decomposition, principal-component analysis, k-means clustering, and linear combination fitting, in conjunction with a curated spectral database, to develop high-accuracy quantitative compositional maps of the effective depth of discharge across individual positive electrode particles and ensembles of particles. Using curated reference spectra, accurate and quantitative mapping of inter- and intraparticle compositional heterogeneities, phase separation, and stress gradients is achieved for a canonical phase-transforming positive electrode material, α-V2O5. Phase maps from single-particle measurements are used to reconstruct directional stress profiles showcasing the distinctive insights accessible from a standards-informed application of high-dimensional chemical imaging.
RESUMO
In their recent publication in Patterns, the authors proposed a novel workflow to derive compositional and stress maps for positive electrode materials of Li-ion batteries from hyperspectral X-ray imaging data. They describe their interdisciplinary collaboration, the elements that sustain such collaborations, and their effect on the flourishing of the domain and data science.
RESUMO
We report a metal-organic framework (MOF) with a rare two-dimensional (2D) secondary building unit (SBU). The SBU comprises mixed-valent Fe2+ and Fe3+ metal ions bridged by oxygen atoms pertaining to the polytopic ligand 3,3',4,4',5,5'-hexahydroxybiphenyl, which also define the iron-oxide 2D layers. Overall, the anionic framework exhibits rare topology and evidences strong electronic communication between the mixed-valence iron sites. These results highlight the importance of dimensionality control of MOF SBUs for discovering new topologies in reticular chemistry, and especially for improving electronic communication within the MOF skeleton.
RESUMO
The metal-to-insulator transition of VO2 underpins applications in thermochromics, neuromorphic computing, and infrared vision. Ge alloying is shown to elevate the transition temperature by promoting V-V dimerization, thereby expanding the stability of the monoclinic phase to higher temperatures. By suppressing the propensity for oxygen vacancy formation, Ge alloying renders the hysteresis of the transition exquisitely sensitive to oxygen stoichiometry.
RESUMO
BACKGROUND AND OBJECTIVES: We addressed understudied questions in social support. Do providers, who recipients agree are more supportive than others (i.e., consensually supportive), evoke more favorable affect in recipients? Do groups differ in their supportiveness and do supportive groups evoke favorable affect in their members? Can any group differences be explained by dyadic relationships within groups? METHODS: We analyzed data from seven samples of well-acquainted groups and groups of strangers in which participants rated each other on supportiveness, and affect experienced when with each group member. RESULTS: Social Relations Model analyses indicated that consensually supportive providers evoked higher positive affect in recipients but not lower negative affect. Uniquely supportive relationships evoked higher positive and lower negative affect. Groups differed in their supportiveness and more supportive groups evoked higher positive and lower negative affect. Correlations between support and affect at the level of groups primarily reflected dyadic relationships within groups, rather than the groups themselves. Groups of strangers showed the same effects as well-acquainted groups. CONCLUSIONS: The findings for consensually supportive providers and low negative affect is inconsistent with most social support theory. Supportive groups' links to affect could be explained by dyadic relationships within groups, rather than the groups themselves.
Assuntos
Relações Interpessoais , Apoio Social , HumanosRESUMO
Forecasting which dyads will develop mutually supportive relationships is an important applied and basic research question. Applying psychometric theory to the design of forecasting studies shows that agreement between dyad members about their relationship (relational reciprocity) sets an upper limit for forecasting accuracy by determining the reliability of measurement. To test this, we estimated relational reciprocity in Study 1. Participants in seven samples (six student and one military; N = 504; Ndyads = 766) rated each other on support-related constructs in round-robin designs. Relational reciprocity was very low, undermining reliability. Formulas from psychometric theory predicted that forecasting supportive dyads would be practically impossible. To test this, we had participants in Study 2 complete a measure for matching dyads derived from recent theory. As predicted, supportive matches could not be forecast with acceptable precision. Theoretically, this falsifies some predictions of recent social-support theory. Practically, it remains unclear how to translate basic social-support research into effective interventions.
Assuntos
Apoio Social , Previsões , Humanos , Reprodutibilidade dos TestesRESUMO
V2O5 is of interest as a Mg intercalation electrode material for Mg batteries, both in its thermodynamically stable layered polymorph (α-V2O5) and in its metastable tunnel structure (ζ-V2O5). However, such oxide cathodes typically display poor Mg insertion/removal kinetics, with large voltage hysteresis. Herein, we report the synthesis and evaluation of nanosized (ca. 100 nm) ζ-V2O5 in Mg-ion cells, which displays significantly enhanced electrochemical kinetics compared to microsized ζ-V2O5. This effect results in a significant boost in stable discharge capacity (130 mA h g-1) compared to bulk ζ-V2O5 (70 mA h g-1), with reduced voltage hysteresis (1.0 V compared to 1.4 V). This study reveals significant advancements in the use of ζ-V2O5 for Mg-based energy storage and yields a better understanding of the kinetic limiting factors for reversible magnesiation reactions into such phases.
RESUMO
The diffusion pathways of Li-ions as they traverse cathode structures in the course of insertion reactions underpin many questions fundamental to the functionality of Li-ion batteries. Much current knowledge derives from computational models or the imaging of lithiation behavior at larger length scales; however, it remains difficult to experimentally image Li-ion diffusion at the atomistic level. Here, by using topochemical Li-ion insertion and extraction to induce single-crystal-to-single-crystal transformations in a tunnel-structured V2 O5 polymorph, coupled with operando powder X-ray diffraction, we leverage single-crystal X-ray diffraction to identify the sequence of lattice interstitial sites preferred by Li-ions to high depths of discharge, and use electron density maps to create a snapshot of ion diffusion in a metastable phase. Our methods enable the atomistic imaging of Li-ions in this cathode material in kinetic states and provide an experimentally validated angstrom-level 3D picture of atomic pathways thus far only conjectured through DFT calculations.
RESUMO
Metastable materials that represent excursions from thermodynamic minima are characterized by distinctive structural motifs and electronic structure, which frequently underpins new function. The binary oxides of hafnium present a rich diversity of crystal structures and are of considerable technological importance given their high dielectric constants, refractory characteristics, radiation hardness, and anion conductivity; however, high-symmetry tetragonal and cubic polymorphs of HfO2 are accessible only at substantially elevated temperatures (1720 and 2600 °C, respectively). Here, we demonstrate that the core-shell arrangement of VO2 and amorphous HfO2 promotes outwards oxygen diffusion along an electropositivity gradient and yields an epitaxially matched V2O3/HfO2 interface that allows for the unprecedented stabilization of the metastable cubic polymorph of HfO2 under ambient conditions. Free-standing cubic HfO2, otherwise accessible only above 2600 °C, is stabilized by acid etching of the vanadium oxide core. In contrast, interdiffusion under oxidative conditions yields the negative thermal expansion material HfV2O7. Variable temperature powder X-ray diffraction demonstrate that the prepared HfV2O7 exhibits pronounced negative thermal expansion in the temperature range between 150 and 700 °C. The results demonstrate the potential of using epitaxial crystallographic relationships to facilitate preferential nucleation of otherwise inaccessible metastable compounds.
RESUMO
The development of efficient solar energy conversion to augment other renewable energy approaches is one of the grand challenges of our time. Water splitting, or the disproportionation of H2O into energy-dense fuels, H2 and O2, is undoubtedly a promising strategy. Solar water splitting involves the concerted transfer of four electrons and four protons, which requires the synergistic operation of solar light harvesting, charge separation, mass and charge transport, and redox catalysis processes. It is unlikely that individual materials can mediate the entire sequence of charge and mass transport as well as energy conversion processes necessary for photocatalytic water splitting. An alternative approach, emulating the functioning of photosynthetic systems, involves the utilization of hybrid systems wherein different components perform the various functions required for solar water splitting. The design of such hybrid systems requires the multiple components to operate in lockstep with optimal thermodynamic driving forces and interfacial charge transfer kinetics. This Account describes a new class of nanoscale heterostructures comprising M xV2O5 nanowires, where M is a p-block cation with a ( n - 1) d10 ns2 np0 electronic configuration characterized by a stereoactive lone pair of electrons and x is its stoichiometry, interfaced with II-VI semiconductor quantum dots (QDs). Photocatalytic water splitting involves the transfer of excited-state holes from QDs to mid-gap states (derived from the stereoactive lone pairs of p-block cations) of nanowires, hole transport through nanowires, the reduction of protons at a QD-immobilized catalyst, and water oxidation at an anode. The M xV2O5/QD architectures provide a vast design space for evolutionary optimization of function with considerable tunability of composition and structure of the individual components as well as of the interfacial structure, thereby facilitating programmability of absorption spectra, energetic offsets, and charge-transfer reactivity. The available design space spans choice of the p-block cation M, its stoichiometry x, the composition and size of various QDs, and the nature of the nanowire/QD interface. This multivariate parameter space has been navigated by integrating first-principles modeling, diversified synthesis, spectroscopic measurements, and catalytic evaluation to facilitate the rational design of several generations of heterostructures and the systematic improvement of their photocatalytic performance. The electronic structures of the target heterostructures are predicted by DFT calculations in light of the revised lone pair model of stereoactive structural distortions and evaluated by hard X-ray photoelectron spectroscopy such as to systematically tune the interfacial band offsets. Central to this approach is the development of a topochemical "etch-a-sketch" intercalation approach that allows for facile installation of p-block cations in metastable polymorphs of V2O5. The interfacial charge transfer kinetics of M xV2O5/QD heterostructures is further evaluated by transient absorption spectroscopy to measure excited-state charge-transfer dynamics and is found to depend sensitively on interfacial structure and the thermodynamic driving forces in accordance with Marcus theory. The integration of theory and experiment has allowed for the design of viable photocatalytic architectures exemplified by the exceptional catalytic performance of ß-Pb xV2O5/CdX (X= S, Se) architectures, which has subsequently been elaborated to other lone-pair M xV2O5 compounds, demonstrating the effective exploitation of the opportunities for programmability available in the design space.
RESUMO
Tackling the complex challenge of harvesting solar energy to generate energy-dense fuels such as hydrogen requires the design of photocatalytic nanoarchitectures interfacing components that synergistically mediate a closely interlinked sequence of light-harvesting, charge separation, charge/mass transport, and catalytic processes. The design of such architectures requires careful consideration of both thermodynamic offsets and interfacial charge-transfer kinetics to ensure long-lived charge carriers that can be delivered at low overpotentials to the appropriate catalytic sites while mitigating parasitic reactions such as photocorrosion. Here we detail the theory-guided design and synthesis of nanowire/quantum dot heterostructures with interfacial electronic structure specifically tailored to promote light-induced charge separation and photocatalytic proton reduction. Topochemical synthesis yields a metastable ß-Sn0.23V2O5 compound exhibiting Sn 5s-derived midgap states ideally positioned to extract photogenerated holes from interfaced CdSe quantum dots. The existence of these midgap states near the upper edge of the valence band (VB) has been confirmed, and ß-Sn0.23V2O5/CdSe heterostructures have been shown to exhibit a 0 eV midgap state-VB offset, which underpins ultrafast subpicosecond hole transfer. The ß-Sn0.23V2O5/CdSe heterostructures are further shown to be viable photocatalytic architectures capable of efficacious hydrogen evolution. The results of this study underscore the criticality of precisely tailoring the electronic structure of semiconductor components to effect rapid charge separation necessary for photocatalysis.
RESUMO
Increasing intercalation of Li-ions brings about distortive structural transformations in several canonical intercalation hosts. Such phase transformations require the energy dissipative creation and motion of dislocations at the interface between the parent lattice and the nucleated Li-rich phase. Phase inhomogeneities within particles and across electrodes give rise to pronounced stress gradients, which can result in capacity fading. How such transformations alter Li-ion diffusivities remains much less explored. In this article, we use layered V2O5 as an intercalation host and examine the structural origins of the evolution of Li-ion diffusivities with phase progression upon electrochemical lithiation. Galvanostatic intermittent titration measurements show a greater than 4 orders of magnitude alteration of Li-ion diffusivity in V2O5 as a function of the extent of lithiation. Pronounced dips in Li-ion diffusivities are correlated with the presence of phase mixtures as determined by Raman spectroscopy and X-ray diffraction, whereas monophasic regimes correspond to the highest Li-ion diffusivity values measured within this range. First-principles density functional theory calculations confirm that the variations in Li-ion diffusivity do not stem from intrinsic differences in diffusion pathways across the different lithiated V2O5 phases, which despite differences in the local coordination environments of Li-ions show comparable migration barriers. Scanning transmission X-ray microscopy measurements indicate the stabilization of distinct domains reflecting the phase coexistence of multiple lithiated phases within individual actively intercalating particles. The results thus provide fundamental insight into the considerable ion transport penalties incurred as a result of phase boundaries formed within actively intercalating particles. The combination of electrochemical studies with ensemble structural characterization and single-particle X-ray imaging of phase boundaries demonstrates the profound impact of interfacial phenomena on macroscopic electrode properties.
RESUMO
Molybdenum disulfide (MoS2) is a semiconducting transition metal dichalcogenide that is known to be a catalyst for both the hydrogen evolution reaction (HER) as well as for hydro-desulfurization (HDS) of sulfur-rich hydrocarbon fuels. Specifically, the edges of MoS2 nanostructures are known to be far more catalytically active as compared to unmodified basal planes. However, in the absence of the precise details of the geometric and electronic structure of the active catalytic sites, a rational means of modulating edge reactivity remain to be developed. Here we demonstrate using first-principles calculations, X-ray absorption spectroscopy, as well as scanning transmission X-ray microscopy (STXM) imaging that edge corrugations yield distinctive spectroscopic signatures corresponding to increased localization of hybrid Mo 4d states. Independent spectroscopic signatures of such edge states are identified at both the S L2,3 and S K-edges with distinctive spatial localization of such states observed in S L2,3-edge STXM imaging. The presence of such low-energy hybrid states at the edge of the conduction band is seen to correlate with substantially enhanced electrocatalytic activity in terms of a lower Tafel slope and higher exchange current density. These results elucidate the nature of the edge electronic structure and provide a clear framework for its rational manipulation to enhance catalytic activity.
RESUMO
Recently, V2 O5 nanowires have been synthesized as several different polymorphs, and as correlated bronzes with cations intercalated between the layers of edge- and corner- sharing VO6 octahedra. Unlike extended crystals, which tend to be plagued by substantial local variations in stoichiometry, nanowires of correlated bronzes exhibit precise charge ordering, thereby giving rise to pronounced electron correlation effects. These developments have greatly broadened the scope of research, and promise applications in several frontier electronic devices that make use of novel computing vectors. Here a study is presented of δ-Srx V2 O5 , expanded δ-Srx V2 O5 , exfoliated δ-Srx V2 O5 and δ-Kx V2 O5 using a combination of synchrotron soft X-ray spectroscopy and density functional theory calculations. The band gaps of each system are experimentally determined, and their calculated electronic structures are discussed from the perspective of the measured spectra. Band gaps ranging from 0.66 ± 0.20 to 2.32 ± 0.20â eV are found, and linked to the underlying structure of each material. This demonstrates that the band gap of V2 O5 can be tuned across a large portion of the range of greatest interest for device applications. The potential for metal-insulator transitions, tuneable electron correlations and charge ordering in these systems is discussed within the framework of our measurements and calculations, while highlighting the structure-property relationships that underpin them.
RESUMO
New V2O5 polymorphs have risen to prominence as a result of their open framework structures, cation intercalation properties, tunable electronic structures, and wide range of applications. The application of these materials and the design of new, useful polymorphs requires understanding their defining structure-property relationships. We present a characterization of the band gap and electronic structure of nanowires of the novel ζ-phase and the orthorhombic α-phase of V2O5 using X-ray spectroscopy and density functional theory calculations. The band gap is found to decrease from 1.90 ± 0.20 eV in the α-phase to 1.50 ± 0.20 eV in the ζ-phase, accompanied by the loss of the α-phase's characteristic split-off dxy band in the ζ-phase. States of dxy origin continue to dominate the conduction band edge in the new polymorph but the inequivalence of the vanadium atoms and the increased local symmetry of [VO6] octahedra results in these states overlapping with the rest of the V 3d conduction band. ζ-V2O5 exhibits anisotropic conductivity along the b direction, defining a 1D tunnel, in contrast to α-V2O5 where the anisotropic conductivity is along the ab layers. We explain the structural origins of the differences in electronic properties that exist between the α- and ζ-phase.
RESUMO
Relational regulation theory hypothesizes that (a) the main effect between perceived support and mental health primarily reflects ordinary social interaction rather than conversations about stress and how to cope with it, and (b) the extent to which a provider regulates a recipient's mental health primarily reflects the recipient's personal taste (i.e., is relational), rather than the provider's objective supportiveness. In three round-robin studies, participants rated each other on supportiveness and the quality of ordinary social interaction, as well as their own affect when interacting with each other. Samples included marines about to deploy to Afghanistan (N = 100; 150 dyads), students sharing apartments (N = 64; 96 dyads), and strangers (N = 48; 72 dyads). Perceived support and ordinary social interaction were primarily relational, and most of perceived support's main effect on positive affect was redundant with ordinary social interaction. The main effect between perceived support and affect emerged among strangers after brief text conversations, and these links were partially verified by independent observers. Findings for negative affect were less consistent with theory. Ordinary social interaction appears to be able to explain much of the main effect between perceived support and positive affect.