Publisher Correction: Dimensionally and environmentally ultra-stable polymer composites reinforced with carbon fibres.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Publisher Correction: Dimensionally and environmentally ultra-stable polymer composites reinforced with carbon fibres.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Dimensionally and environmentally ultra-stable polymer composites reinforced with carbon fibres.

The quest to develop materials that enable the manufacture of dimensionally ultra-stable structures for critical-dimension components in spacecraft has led to much research over many decades and the evolution of carbon fibre reinforced polymer materials. This has resulted in structural designs that feature a near-zero coefficient of thermal expansion. However, the dimensional instabilities that result from moisture ingression and release remain the fundamental vulnerability of the matrix, which restricts many applications. Here, we address this challenge by developing a space-qualifiable physical surface barrier that blends within the mechanical properties of the composite, thus becoming part of the composite itself. The resulting enhanced composite features mechanical integrity and a strength that is superior to the underlying composite, while remaining impervious to moisture and outgassing. We demonstrate production capability for a model-sized component for the Sentinel-5 mission and demonstrate such capability for future European Space Agency (ESA) and National Aeronautics and Space Administration (NASA) programmes such as Copernicus Extension, Earth Explorer and Science Cosmic Visions.

Multi-Functional Carbon Fibre Composites using Carbon Nanotubes as an Alternative to Polymer Sizing.

Carbon fibre reinforced polymers (CFRP) were introduced to the aerospace, automobile and civil engineering industries for their high strength and low weight. A key feature of CFRP is the polymer sizing - a coating applied to the surface of the carbon fibres to assist handling, improve the interfacial adhesion between fibre and polymer matrix and allow this matrix to wet-out the carbon fibres. In this paper, we introduce an alternative material to the polymer sizing, namely carbon nanotubes (CNTs) on the carbon fibres, which in addition imparts electrical and thermal functionality. High quality CNTs are grown at a high density as a result of a 35 nm aluminium interlayer which has previously been shown to minimise diffusion of the catalyst in the carbon fibre substrate. A CNT modified-CFRP show 300%, 450% and 230% improvements in the electrical conductivity on the 'surface', 'through-thickness' and 'volume' directions, respectively. Furthermore, through-thickness thermal conductivity calculations reveal a 107% increase. These improvements suggest the potential of a direct replacement for lightning strike solutions and to enhance the efficiency of current de-icing solutions employed in the aerospace industry.

The growth of silica and silica-clad nanowires using a solid-state reaction mechanism on Ti, Ni and SiO(2) layers.

A large area compatible and solid-state process for growing silica nanowires is reported using nickel, titanium and silicon dioxide layers on silicon. The silica nanowires also contain silicon, as indicated by Raman spectroscopy. The phonon confinement model is employed to measure the diameter of the Si rich tail for our samples. The measured Raman peak shift and full width at half-maximum variation with the nanowire diameter qualitatively match with data available in the literature. We have investigated the effect of the seedbed structure on the nanowires, and the effect of using different gas conditions in the growth stages. From this, we have obtained the growth mechanism, and deduced the role of each individual substrate seedbed layer in the growth of the nanowires. We report a combined growth mechanism, where the growth is initiated by a solid-liquid-solid process, which is then followed by a vapour-liquid-solid process. We also report on the formation of two distinct structures of nanowires (type I and type II). The growth of these can be controlled by the use of titanium in the seedbed. We also observe that the diameter of the nanowires exhibits an inverse relation with the catalyst thickness.

Rocking ratchets in nanostructured superconducting-magnetic hybrids.

Two rectification mechanisms in vortex lattice dynamics in Nb films have been studied. These two effects are based on ratchet effects, that is, an ac driving force induces a net dc vortex flow. In our case, an input ac current applied to the Nb films, grown on top of arrays of Ni nanotriangles, yields an output dc voltage. These two rectification effects occur when the vortex lattice moves in periodic asymmetric potentials. These pinning potentials are induced by the array of Ni triangles. In one configuration (longitudinal effect) the driven force is applied perpendicular to the triangle reflection symmetry axis; in the second one (transverse effect) the input current is injected parallel to the triangle reflection symmetry axis. In the framework of the rocking ratchet mechanism, the appropriate Langevin equation allows us to model the experimental data, taking into account the vortex-vortex interaction.

Crossed-ratchet effects for magnetic domain wall motion.

We study both experimentally and theoretically the driven motion of domain walls in extended amorphous magnetic films patterned with a periodic array of asymmetric holes. We find two crossed-ratchet effects of opposite sign that change the preferred sense for domain wall propagation, depending on whether a flat or a kinked wall is moving. By solving numerically a simple phi(4) model we show that the essential physical ingredients for this effect are quite generic and could be realized in other experimental systems involving elastic interfaces moving in multidimensional ratchet potentials.

A superconducting reversible rectifier that controls the motion of magnetic flux quanta.

We fabricated a device that controls the motion of flux quanta in a niobium superconducting film grown on an array of nanoscale triangular pinning potentials. The controllable rectification of the vortex motion is due to the asymmetry of the fabricated magnetic pinning centers. The reversal in the direction of the vortex flow is explained by the interaction between the vortices trapped on the magnetic nanostructures and the interstitial vortices. The applied magnetic field and input current strength can tune both the polarity and magnitude of the rectified vortex flow. Our ratchet system is explained and modeled theoretically, taking the interactions between particles into consideration.