Enhanced electrochemical response of carbon quantum dot modified electrodes.

A glassy carbon electrode (GCE) was surface-modified with carbon quantum dots (CQDs) and applied for the effective enhancement of the electrochemical signal for dopamine and uric acid determination. CQDs were prepared from graphite by a green modification of the Hummers method. They were characterized by FTIR-ATR, XPS, solid-state NMR, fluorescence and Raman spectroscopies. TPD-MS analysis was applied to characterize the functionalization of the surface. The CQDs were assembled on the glassy carbon electrode by adsorption because of the large number of carboxy groups on their surface warrants effective adsorption. The modified GCE exhibits a sensitivity that is almost 10 times better than of the bare GCE. The lower limits of detection are 1.3µM for uric acid and 2.7µM for dopamine.

Transferable force fields for adsorption of small gases in zeolites.

We provide transferable force fields for oxygen, nitrogen, and carbon monoxide that are able to reproduce experimental adsorption in both pure silica and alumino-substituted zeolites at cryogenic and high temperatures. The force field parameters can be combined with those previously reported for carbon dioxide, methane, and argon, opening the possibility for studying mixtures of interest containing the six components. Using these force field parameters we obtained some adsorption isotherms at cryogenic temperatures that at first sight were in discrepancies with experimental values for certain molecules and structures. We attribute these discrepancies to the sensitiveness of the equipment and to kinetic impedimenta that can lead to erratic results. Additional problems can be found during simulations when extra-framework cations are present in the system as their lack of mobility at low temperatures could lead to kinetic effects that hinder experimental adsorption.

Zeolite screening for the separation of gas mixtures containing SO2, CO2 and CO.

We used a combination of experiments and molecular simulations to investigate at the molecular level the effects of zeolite structure on the adsorption and diffusion of sulfur dioxide, carbon dioxide and carbon monoxide as well as separation processes of their mixtures. Our study involved different zeolite topologies and revealed numerous structure-property trends depending on the temperature and pressure conditions. Sulfur dioxide, which has the strongest interactions with zeolites due to its size and polarity, showed the largest adsorption across investigated temperatures and pressures. Our results indicate that structures with channel-type pore topology and low pore volume are the most promising for selective adsorption of sulfur dioxide over carbon dioxide and carbon monoxide under room conditions, while structures with higher pore volume exhibit better storage capacity at higher pressure. Our results emphasize the need for considering both adsorption and diffusion processes in the selection of the optimal structure for a given separation process. Our findings help to identify the best materials for effective separation processes under realistic operating conditions.

Low temperature regeneration of activated carbons using microwaves: revising conventional wisdom.

The purpose of this work was to explore the application of microwaves for the low temperature regeneration of activated carbons saturated with a pharmaceutical compound (promethazine). Contrary to expectations, microwave-assisted regeneration did not lead to better results than those obtained under conventional electric heating. At low temperatures the regeneration was incomplete either under microwave and conventional heating, being this attributed to the insufficient input energy. At mild temperatures, a fall in the adsorption capacity upon cycling was obtained in both devices, although this was much more pronounced for the microwave. These results contrast with previous studies on the benefits of microwaves for the regeneration of carbon materials. The fall in the adsorption capacity after regeneration was due to the thermal cracking of the adsorbed molecules inside the carbon porous network, although this effect applies to both devices. When microwaves are used, along with the thermal heating of the carbon bed, a fraction of the microwave energy seemed to be directly used in the decomposition of promethazine through the excitation of the molecular bonds by microwaves (microwave-lysis). These results point out that the nature of the adsorbate and its ability to interact with microwave are key factors that control the application of microwaves for regeneration of exhausted activated carbons.

Adsorption of p-cresol on novel diatomite/carbon composites.

Hybrid inorganic/organic adsorbents were synthesized using mixtures of diatomite and carbon charcoal as precursors, and explored for the removal of p-cresol from aqueous solution. The carbon/diatomite composites displayed a bimodal and interconnected porous structure which was partially inherited from both precursors. They display moderate surface areas (between 100 and 400 m(2)g(-1)) due to their large inorganic content (between 70 and 90 wt.%), since the diatomite is a non-porous material. Compared to activated carbons with a more developed porosity, p-cresol adsorption on the prepared carbon/diatomite composites was much faster, showing adsorption capacities similar to those of conventional adsorbents over a wide pH range. These results show a good affinity of p-cresol molecules towards the hybrid inorganic/organic composites, and demonstrate the suitability of these novel materials for the removal of aromatic (polar) molecules, despite their dominant inorganic character.

Carbon foams as catalyst supports for phenol photodegradation.

A carbon foam using coal tar pitch as precursor was prepared and investigated as support for titanium oxide for the photocatalytic degradation of phenol. The performance of the carbon foam/titania composite was compared to those of unsupported titania and other activated carbon composites from the literature. The photodegradation rate of phenol over the catalysts under UV illumination was fitted to the Langmuir-Hinshelwood model; data showed that the apparent rate constant of the carbon foam supported titania was almost three times larger than that of bare titania, and comparable to that of other carbon supported composites. Considering the low porous features of the carbon foam, this suggests that large surface area supports are not essential to achieve high degradation rates and efficiencies. Moreover, when titania is supported on the carbon foam large amounts of catechol are detected in solution after UV irradiation, indicating a better degradation efficiency.

Kinetics of naphthalene adsorption on an activated carbon: comparison between aqueous and organic media.

The purpose of this work was to explore the kinetics of naphthalene adsorption on an activated carbon from aqueous and organic solutions. Kinetic curves were fitted to different theoretical models, and the results have been discussed in terms of the nature and properties of the solvents, the affinity of naphthalene to the solutions, and the accessibility to the porosity of the activated carbon. Data was fitted to the pseudo-second order kinetic model with good correlation coefficients for all the solution media. The faster adsorption rate was obtained for the most hydrophobic solvent (heptane). The overall adsorption rate of naphthalene seems to be controlled simultaneously by external (boundary layer) followed by intraparticle diffusion in the porosity of the activated carbon when water, ethanol and cyclohexane are used as solvents. In the case of heptane, only two stages were observed (pore diffusion and equilibrium) suggesting that the limiting stage is the intraparticle diffusion. The low value of the boundary thickness supports this observation.

Improved phenol adsorption on carbons after mild temperature steam reactivation.

The purpose of this work is to explore steam reactivation at moderate temperatures of activated carbon exhausted with phenol, a highly toxic compound frequently present in industrial wastewater. The spent carbon was treated with steam at various temperatures (450, 600 and 850 degrees C) and times (from 5 to 60 min). Promising results were obtained by applying moderate temperatures and times. Whereas at low temperatures the complete regeneration of the carbon is not accomplished, an almost quantitative desorption of the pollutant was achieved at 600 degrees C after exposure times below 30 min, with minimal damages in the porous network of the carbon. Further reutilization of the regenerated carbon resulted in a superior performance towards phenol uptake. The regeneration efficiency at 850 degrees C strongly depends on the time of reactivation, with an enhanced phenol uptake when short treatment times are applied. Prolonged duration of the regeneration treatment reduced phenol adsorption capacities, due to overreactivation of the carbon in the steam atmosphere, and to the blockage of the porous carbon network.

Microwave-assisted regeneration of activated carbons loaded with pharmaceuticals.

The purpose of this work was to explore the application of microwaves for the regeneration of activated carbons spent with salicylic acid, a metabolite of a common analgesic frequently found in wastewater from the pharmaceutical industry. The exhausted carbon was treated in a quartz reactor by microwave irradiation at 2450 MHz at different temperatures and atmospheres, the regeneration efficiency being highly dependent on the operating conditions. Quantitative desorption of the pollutant was achieved at high temperature and oxidizing atmosphere, with regeneration efficiencies as high as 99% after six cycles. The stripping efficiency was superior to 95% at high temperatures and decreased at 450 degrees C. The incomplete desorption of the adsorbate at low temperature was further confirmed by the changes in the porosity observed by N2 and CO2 adsorption isotherms. Hence, micropores remain blocked which results in a reduction in loading capacities in successive cycles.

Removal of naphthalene from aqueous solution on chemically modified activated carbons.

The aim of this work was to correlate the textural and chemical features of carbonaceous adsorbents with the adsorption capacity of naphthalene from aqueous phase, at the concentration in which this compound is usually found in wastewater from coke ovens. The study reveals that the adsorption capacity in different carbon materials depends not only on the textural characteristics of the material but also on the functionalities of the activated carbons. The micropores of the adsorbents, particularly those of narrower diameter, were found to be active sites for the retention of naphthalene. In contrast, the modification of the surface chemistry of the carbon materials led to a decrease in the adsorption capacities. Dispersive forces play an important role, and adsorbents with a higher non-polar character have proven to be more efficient for the naphthalene adsorption. This behaviour has been linked to the presence of specific interactions between the basal planes and the polyaromatic structure of the naphthalene molecule.