Enhanced Spontaneous Emission of Monolayer MoS2 on Epitaxially Grown Titanium Nitride Epsilon-Near-Zero Thin Films.

Room-temperature photoluminescence enhancement of molybdenum disulfide (MoS2) monolayers on epitaxial titanium nitride (TiN) thin films grown by molecular-beam-epitaxy as well as magnetron-sputtered TiN films is observed by a confocal laser scanning microscope with excitation wavelengths covering the transition of TiN's macroscopic optical properties from dielectric to plasmonic. The photoluminescence enhancement increases as TiN becomes more metallic, and strong enhancement is obtained at the excitation wavelengths equal to or longer than the epsilon-near-zero (ENZ) wavelength of TiN films. A good agreement is observed between measured and calculated enhancements. The enhancement is attributed to the increased excitation field in MoS2 at TiN's ENZ wavelength and interference effects for thick spacers that separate the MoS2 flakes from TiN films in the metallic regime. This study enriches the fundamental understanding of emission properties on ENZ substrates that could be important for the development of advanced nanoscale lasers/light sources, optical/biosensors, and nano-optoelectronic devices.

Gate-tunable optical filter based on conducting oxide metasurface heterostructure.

A gate-tunable plasmonic optical filter incorporating a subwavelength patterned metal-insulator-metal metasurface heterostructure is proposed. An additional thin transparent conducting oxide (TCO) layer is embedded in the insulator layer to form a double metal-oxide-semiconductor configuration. Heavily n-doped indium tin oxide (ITO) is employed as the TCO material, whose optical property can be electrically tuned by the formation of a thin active epsilon-near-zero layer at the ITO-oxide interfaces. Full-wave electromagnetic simulations show that amplitude modulation and shift of transmission peak are achievable with 3-5 V applied bias, depending on the application. Moreover, the modulation strength and transmission peak shift increase with a thinner ITO layer. This work is an essential step toward a realization of next-generation compact photonic/plasmonic integrated devices.

Gate-Tunable Plasmon-Induced Transparency Modulator Based on Stub-Resonator Waveguide with Epsilon-Near-Zero Materials.

We demonstrate an electrically tunable ultracompact plasmonic modulator with large modulation strength (>10 dB) and a small footprint (~1 µm in length) via plasmon-induced transparency (PIT) configuration. The modulator based on a metal-oxide-semiconductor (MOS) slot waveguide structure consists of two stubs embedded on the same side of a bus waveguide forming a coupled system. Heavily n-doped indium tin oxide (ITO) is used as the semiconductor in the MOS waveguide. A large modulation strength is realized due to the formation of the epsilon-near-zero (ENZ) layer at the ITO-oxide interface at the wavelength of the modulated signal. Numerical simulation results reveal that such a significant modulation can be achieved with a small applied voltage of ~3V. This result shows promise in developing nanoscale modulators for next generation compact photonic/plasmonic integrated circuits.

Bloch surface wave enhanced biosensor for the direct detection of Angiopoietin-2 tumor biomarker in human plasma.

Quantitative detection of angiogenic biomarkers provides a powerful tool to diagnose cancers in early stages and to follow its progression during therapy. Conventional tests require trained personnel, dedicated laboratory equipment and are generally time-consuming. Herein, we propose our developed biosensing platform as a useful tool for a rapid determination of Angiopoietin-2 biomarker directly from patient plasma within 30 minutes, without any sample preparation or dilution. Bloch surface waves supported by one dimensional photonic crystal are exploited to enhance and redirect the fluorescence arising from a sandwich immunoassay that involves Angiopoietin-2. The sensing units consist of disposable and low-cost plastic biochips coated with the photonic crystal. The biosensing platform is demonstrated to detect Angiopoietin-2 in plasma samples at the clinically relevant concentration of 6 ng/mL, with an estimated limit of detection of approximately 1 ng/mL. This is the first Bloch surface wave based assay capable of detecting relevant concentrations of an angiogenic factor in plasma samples. The results obtained by the developed biosensing platform are in close agreement with enzyme-linked immunosorbent assays, demonstrating a good accuracy, and their repeatability showed acceptable relative variations.

Excitation of epsilon-near-zero resonance in ultra-thin indium tin oxide shell embedded nanostructured optical fiber.

We report a novel optical waveguide design of a hollow step index fiber modified with a thin layer of indium tin oxide (ITO). We show an excitation of highly confined waveguide mode in the proposed fiber near the wavelength where permittivity of ITO approaches zero. Due to the high field confinement within thin ITO shell inside the fiber, the epsilon-near-zero (ENZ) mode can be characterized by a peak in modal loss of the hybrid waveguide. Our results show that such in-fiber excitation of ENZ mode is due to the coupling of the guided core mode to the thin-film ENZ mode. We also show that the phase matching wavelength, where the coupling takes place, varies depending on the refractive index of the constituents inside the central bore of the fiber. These ENZ nanostructured optical fibers have many potential applications, for example, in ENZ nonlinear and magneto-optics, as in-fiber wavelength-dependent filters, and as subwavelength fluid channel for optical and bio-photonic sensing.

Effect of thickness disorder on the performance of photonic crystal surface wave sensors.

We investigated experimentally and numerically the robustness of optical sensors based on Bloch waves at the surface of periodic one-dimensional photonic crystals. The distributions of sensor characteristics caused by the fabrication uncertainties in dielectric layer thicknesses have been analyzed and robustness criteria have been set forth and discussed. We show that the performance of the surface wave sensors is sufficiently robust with respect to the changes of the photonic crystal layer thicknesses. Layer thickness optimization of the photonic crystal, carried out to achieve low limit of detection, leads to an improvement of the robustness of the surface wave sensors that is attributed to Bloch states lying deeper in the photonic band gap.

Angularly resolved ellipsometric optical biosensing by means of Bloch surface waves.

In label-free biosensing, a continuous improvement of the limit of detection is necessary to resolve the small change of the surface refractive index produced by interacting biomolecules at a very small concentration. In the present work, optical sensors based on one-dimensional photonic crystals supporting Bloch surface waves are proposed and adopted for label-free optical biosensing. We describe the implementation of an angularly resolved ellipsometric optical sensing scheme based on Bloch surface waves sustained by tantala/silica multilayers. The angular operation is obtained using a focused beam at fixed wavelength and detection of the angular reflectance spectrum by means of an array detector. The results show that the experimental limit of detection for a particular photonic crystal design is 6.5 × 10(-7) refractive index units (RIU)/Hz(1/2) and further decrease could be obtained. For the first time, we report on the practical application of this technique to a cancer biomarker protocol that aims at the detection of a specific glycoprotein (angiopoietin 2) involved in angiogenesis and inflammation processes.

Optimization of angularly resolved Bloch surface wave biosensors.

Bloch surface wave (BSW) sensors to be used in biochemical analytics are discussed in angularly resolved detection mode and are compared to surface plasmon resonance (SPR) sensors. BSW supported at the surface of a dielectric thin film stack feature many degrees of design freedom that enable tuning of resonance properties. In order to obtain a figure of merit for such optimization, the measurement uncertainty depending on resonance width and depth is deduced from different numerical models. This yields a limit of detection which depends on the sensor's free measurement range and which is compared to a figure of merit derived previously. Stack design is illustrated for a BSW supporting thin film stack and is compared to the performance of a gold thin film for SPR sensing. Maximum sensitivity is obtained for a variety of stacks with the resonance positioned slightly above the TIR critical angle. Very narrow resonance widths of BSW sensors require sufficient sampling but are also associated with long surface wave propagation lengths as the limiting parameter for the performance of this kind of sensors.

Combining label-free and fluorescence operation of Bloch surface wave optical sensors.

We report on the design, fabrication, and characterization of optical sensors based on Bloch surface waves propagating at the truncation edge of one-dimensional photonic crystals. The sensors can be simultaneously operated in both a label-free mode, where small refractive index changes at the surface are detected, and a fluorescence mode, where the fluorescence from a novel heptamethyne dye label in the proximity of the surface is collected. The two modes operate in the near-infrared spectral range with the same configuration of the optical reading apparatus. The limit of detection is shown to be smaller than that of equivalent surface plasmon sensors and the fluorescence collection efficiency is such that it can be efficiently analyzed by the same camera sensor used for label-free operation.

A full ellipsometric approach to optical sensing with Bloch surface waves on photonic crystals.

We report on the investigation on the resolution of optical sensors exploiting Bloch surface waves sustained by one dimensional photonic crystals. A figure of merit is introduced to quantitatively assess the performance of such sensors and its dependency on the geometry and materials of the photonic crystal. We show that the figure of merit and the resolution can be improved by adopting a full ellipsometric phase-sensitive approach. The theoretical predictions are confirmed by experiments in which, for the first time, such type of sensors are operated in the full ellipsometric scheme.