Growth and characterization of germanium telluride nanowires via vapor-liquid-solid mechanism.

Phase-change materials (PCMs), which can transition reversibly between crystalline and amorphous phases, have shown great promise for next-generation memory devices due to their nonvolatility, rapid switching periods, and random-access capability. Several groups have investigated phase-change nanowires for memory applications in recent years. The ability to regulate the scale of nanostructures remains one of the most significant obstacles in nanoscience. Herein, we describe the growth and characterization of germanium telluride (GeTe) nanowires, which are essential for phase-change memory devices. GeTe nanowires were produced by combining thermal evaporation and vapor-liquid-solid (VLS) techniques, using 8 nm Au nanoparticles as the metal catalyst. The influence of various growth parameters, including inert gas flow rate, working pressure, growth temperature, growth duration, and growth substrate, was examined. Ar gas flow rate of 30 sccm and working pressure of 75 Torr produced the narrowest GeTe nanowires horizontally grown on a Si substrate. Using scanning electron microscopy, the dimensions, and morphology of GeTe nanowires were analyzed. Transmission electron microscopy and energy-dispersive x-ray spectroscopy were utilized to conduct structural and chemical analyses. Using a SiO2/Si substrate produced GeTe nanowires that were thicker and lengthier. The current-voltage characteristics of GeTe nanowires were investigated, confirming the amorphous nature of GeTe nanowires using conductive atomic force microscopy. In addition, the effects of the VLS mechanism and the Gibbs-Thomson effect were analyzed, which enables the optimization of nanowires for numerous applications, such as memory and reservoir computing.

Effect of Oleylamine on the Surface Chemistry, Morphology, Electronic Structure, and Magnetic Properties of Cobalt Ferrite Nanoparticles.

The influence of oleylamine (OLA) concentration on the crystallography, morphology, surface chemistry, chemical bonding, and magnetic properties of solvothermal synthesized CoFe2O4 (CFO) nanoparticles (NPs) has been thoroughly investigated. Varying OLA concentration (0.01-0.1 M) resulted in the formation of cubic spinel-structured CoFe2O4 NPs in the size-range of 20-14 (±1) nm. The Fourier transform spectroscopic analyses performed confirmed the OLA binding to the CFO NPs. The thermogravimetric measurements revealed monolayer and multilayer coating of OLA on CFO NPs, which were further supported by the small-angle X-ray scattering measurements. The magnetic measurements indicated that the maximum saturation (MS) and remanent (Mr) magnetization decreased with increasing OLA concentration. The ratio of maximum dipolar field (Hdip), coercivity (HC), and exchanged bias field (Hex) (at 10 K) to the average crystallite size (Dxrd), i.e., (Hdip/Dxrd), (HC/Dxrd), and (Hex/Dxrd), increased linearly with OLA concentration, indicating that OLA concurrently controls the particle size and interparticle interaction among the CFO NPs. The results and analyses demonstrate that the OLA-mediated synthesis allowed for modification of the structural and magnetic properties of CFO NPs, which could readily find potential application in electronics and biomedicine.

Production of Size-Controlled Gold Nanoclusters for Vapor-Liquid-Solid Method.

This study demonstrated the deposition of size-controlled gold (Au) nanoclusters via direct-current magnetron sputtering and inert gas condensation techniques. The impact of different source parameters, namely, sputtering discharge power, inert gas flow rate, and aggregation length on Au nanoclusters' size and yield was investigated. Au nanoclusters' size and size uniformity were confirmed via transmission electron microscopy. In general, Au nanoclusters' average diameter increased by increasing all source parameters, producing monodispersed nanoclusters of an average size range of 1.7 ± 0.1 nm to 9.1 ± 0.1 nm. Among all source parameters, inert gas flow rate exhibited a strong impact on nanoclusters' average size, while sputtering discharge power showed great influence on Au nanoclusters' yield. Results suggest that Au nanoclusters nucleate via a three-body collision mechanism and grow through a two-body collision mechanism, wherein the nanocluster embryos grow in size due to atomic condensation. Ultimately, the usefulness of the produced Au nanoclusters as catalysts for a vapor-liquid-solid technique was put to test to synthesize the phase change material germanium telluride nanowires.

Eco-Friendly Synthesis, Crystal Chemistry, and Magnetic Properties of Manganese-Substituted CoFe2O4 Nanoparticles.

The authors report on the effect of manganese (Mn) substitution on the crystal chemistry, morphology, particle size distribution characteristics, chemical bonding, structure, and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles (NPs) synthesized by a simple, cost-effective, and eco-friendly one-pot aqueous hydrothermal method. Crystal structure analyses indicate that the Mn(II)-substituted cobalt ferrites, Co1-x Mn x Fe2O4 (CMFO, x = 0.0-0.5), were crystalline with a cubic inverse spinel structure (space group Fd 3 m ). The average crystallite size increases from 8 to 14 nm with increasing Mn(II) content; the crystal growth follows an exponential growth function while the lattice parameters follow Vegard's law. Chemical bonding analyses made using Raman spectroscopic studies further confirm the cubic inverse spinel phase. The relative changes in specific vibrational modes related to octahedral sites as a function of Mn content suggest a gradual change of measure of inversion of the ferrite lattice at nanoscale dimensions. Small-angle X-ray scattering and electron microscopy revealed a narrow particle size distribution with the spherical shape morphology of the CMFO NPs. The zero-field-cooled and field-cooled magnetic measurements revealed the superparamagnetic behavior of CMFO NPs at room temperature. The sample with x = 0.3 indicates a lower value of blocking temperature (9.16 K) with the improved (maximum) value of saturation magnetization. The results and the structure-composition-property correlation suggest that the economic, eco-friendly hydrothermal approach can be adopted to process superparamagnetic nanostructured magnetic materials at a relatively lower temperature for practical electronic and electromagnetic device applications.

Size and Chemistry Controlled Cobalt-Ferrite Nanoparticles and Their Anti-proliferative Effect against the MCF-7 Breast Cancer Cells.

Engineering cobalt ferrites for application in health and biomedical science poses a challenge in terms of nanoscale morphology with a controlled size, shape, and thermochemical stability coupled with controlled properties for biocompatibility. Here, we report a simple one-step, low temperature approach to produce crystalline, nanosized cobalt ferrites (CFO) with a size ∼4.7 nm and demonstrate their applicability in breast cancer treatment. Inherent physiochemical and magnetic properties, which are quite important for biomedical applications, along with cytotoxicity of CFO nanoparticles (NPs) are investigated in detail. X-ray diffraction analyses confirm the cubic spinel phase with the tensile strain in crystalline CFO NPs. Chemical bonding analyses using infrared and Raman spectroscopic studies also support the cubic spinel phase. Electron microscopy and small-angle X-ray scattering revealed the narrow particle-size distribution and spherical-shape morphology. The as-synthesized CFO NPs exhibit superparamagnetic character. Unsaturated magnetization behavior suggests the existence of disordered spins in the surface layers. The temperature dependence of the magnetic parameters, namely, saturation magnetization, coercivity, retentivity, and squareness ratio, also supports the surface-localized spins. Cytotoxic activity of the as-synthesized CFO NPs against the human breast cancer (MCF-7) cell line and normal human peripheral blood mononuclear cells (PBMC) has been evaluated. The mild response of CFO NPs in terms of their antiproliferative nature against cancer cells and negligible Cytotoxicity reflecting their human-safe-and-friendly nature makes them suitable for bioapplications. Moreover, assessment of toxicity toward human red blood cells (RBC) revealed (<3%) hemolysis as compared to the positive control, suggesting potential applications of CFO NPs for human cells.