Effect of Hydroxyapatite Microspheres, Amoxicillin-Hydroxyapatite and Collagen-Hydroxyapatite Composites on Human Dental Pulp-Derived Mesenchymal Stem Cells.

In this study, the preparation and characterization of three hydroxyapatite-based bioactive scaffolds, including hydroxyapatite microspheres (HAps), amoxicillin-hydroxyapatite composite (Amx-HAp), and collagen-hydroxyapatite composite (Col-HAp) were performed. In addition, their behavior in human dental pulp mesenchymal stem cell (hDPSC) culture was investigated. HAps were synthesized through the following methods: microwave hydrothermal, hydrothermal reactor, and precipitation, respectively. hDPSCs were obtained from samples of third molars and characterized by immunophenotypic analysis. Cells were cultured on scaffolds with osteogenic differentiation medium and maintained for 21 days. Cytotoxicity analysis and migration assay of hDPSCs were evaluated. After 21 days of induction, no differences in genes expression were observed. hDPSCs highly expressed the collagen IA and the osteonectin at the mRNA. The cytotoxicity assay using hDPSCs demonstrated that the Col-HAp group presented non-viable cells statistically lower than the control group (p = 0.03). In the migration assay, after 24 h HAps revealed the same migration behavior for hDPSCs observed compared to the positive control. Col-HAp also provided a statistically significant higher migration of hDPSCs than HAps (p = 0.02). Migration results after 48 h for HAps was intermediate from those achieved by the control groups. There was no statistical difference between the positive control and Col-HAp. Specifically, this study demonstrated that hydroxyapatite-based bioactive scaffolds, especially Col-Hap, enhanced the dynamic parameters of cell viability and cell migration capacities for hDPSCs, resulting in suitable adhesion, proliferation, and differentiation of this osteogenic lineage. These data presented are of high clinical importance and hold promise for application in therapeutic areas, because Col-HAp can be used in ridge preservation, minor bone augmentation, and periodontal regeneration. The development of novel hydroxyapatite-based bioactive scaffolds with clinical safety for bone formation from hDPSCs is an important yet challenging task both in biomaterials and cell biology.

Synthesis of zeolites from residual diatomite using a microwave-assisted hydrothermal method.

Population growth directly affects the industrial production sector, as well as the quantities of waste generated in this sector. Diatomite is a typical example of such industrial waste and is used for the filtration of various products. With the aim of increasing its value, the present study employs this residue, following its usage in beer filtration, as a silicon source for the synthesis of zeolites. Two synthetic routes are used, namely, hydrothermal treatment with and without a pre-treatment step in a conventional microwave for 3-24 h. The results of the compositional and morphological characterization show that the use of a few minutes of microwave radiation reduces the process of zeolite synthesis to 15 h compared to the synthesis without pre-treatment, as well as reducing the production costs. The efficiency of microwave radiation is assessed with regards to solubilizing the residue, the possibility of employing a device of conventional use and the possibility of putting to use the diatomite residue, turning it into a versatile material that can be applied in several areas and process, such as industrial catalysts, the adsorption of environmental pollutants (ions and molecules) and water treatment via ion-exchange resins.

Visible light activated magnetic photocatalysts for water treatment.

Environmental concerns have been raised regarding the intense contamination of water resources. Currently, numerous contaminants that reach water bodies are not efficiently removed by conventional water treatment methods. Therefore, there arises the need for development and optimization of efficient treatment methods for the removal of such recalcitrant contaminants. Given the circumstances, the present study aims to use of advanced oxidative processes for dye degradation. For this purpose, copper and zinc doped cobalt ferrites were synthesized by coprecipitation, targeting the degradation of methylene blue dye. The photocatalysts were characterized by XRD, WD-XRF, FE-SEM, N2 physisorption isotherms, UV-Vis diffuse reflectance spectroscopy, molecular fluorescence spectroscopy and zeta potential. According to the investigation of the degradation mechanism, the holes and hydroxyl radicals were mainly responsible for the dye's degradation. The obtained photocatalysts displayed promising results with up to 99% of dye degradation, employing conventional visible LED lamps, making the practical use of the catalyst highly viable, as well as the economic matters. Additionally, the synthesized materials' magnetic properties allowed total and efficient separation of the catalyst for its reutilization up to 4 cycles, with no decrease in photocatalytic activity and with low leaching of iron ions to solution.

Avaliação da utilização das cinzas da escuma gerada em Reator Anaeróbico de Manta de Lodo e Fluxo Ascendente como pigmento inorgânico de coloração alaranjada / Evaluation of the use of ashes of scum generated from the Upflow Anaerobic Sludge Blanket reactor as orange inorganic pigment

RESUMO A escuma é um resíduo gerado durante o tratamento anaeróbico de efluentes domésticos que necessita de periódica remoção para não comprometer a eficiência do processo. O presente trabalho teve por objetivo utilizar as cinzas da escuma gerada em Reator Anaeróbico de Manta de Lodo e Fluxo Ascendente (RALF) como pigmentos inorgânicos. Amostras de escumas coletadas em diferentes meses foram submetidas a tratamento térmico a 900°C por 1h para remoção da matéria orgânica. As cinzas obtidas foram desaglomeradas em peneira e submetidas às análises química (Fluorescência de raios X - FRX), mineralógica (Difração de raios X - DRX), morfológica (Microscopia Eletrônica de Varredura por Efeito de Campo - FE-MEV) e de coloração (espectroscopia de reflectância difusa na região do Ultravioleta-Visível - UV-Vis). As amostras apresentaram composição majoritária de elementos comuns no ambiente, sendo as fases principais identificadas o quartzo (dióxido de silício - SiO2), a anidrita (sulfato de cálcio - CaSO4) e a hematita (óxido de ferro - Fe2O3). A granulometria das amostras é adequada para a aplicação como pigmento cerâmico; a coloração obtida foi alaranjada intensa e boas propriedades foram identificadas, como boa opacidade, omitindo a coloração do suporte cerâmico, além de não existirem defeitos superficiais que indicassem matéria orgânica residual ou incompatibilidade com o esmalte utilizado. Sendo assim, as cinzas da escuma gerada em RALF apresentaram características interessantes para a aplicação como pigmentos cerâmicos.

ABSTRACT Scum is a residue generated during the anaerobic treatment of domestic effluents and requires periodical removal in order not to harm the process efficacy. This study aimed to use the scum ashes generated from Upflow Anaerobic Sludge Blanket (UASB) reactor as inorganic pigments. The scum samples collected in different months were thermally treated at 900°C for one hour for removal of organic matter. These ashes were dispersed and submitted to chemical (X-ray Fluorescence - XRF), mineralogical (X-ray Diffraction - XRD), morphological (Field Emission Scanning Electron Microscopy - FE-SEM) and color (Ultraviolet-Visible Diffuse Reflectance Spectroscopy - UV-Vis DRS) analyses. The samples were composed mainly by elements commonly found in the environment. The main crystalline phases are quartz (silicon dioxide - SiO2), anhydrite (calcium sulfate - CaSO4) and hematite (iron oxide - Fe2O3). Also, these particles presented suitable size for application as ceramic pigment and the color obtained was intense orange. When applied as ceramic pigment at the decorative fire temperature, the enameled piece presented intense color and the pigment had good opacity, hiding the ceramic support color, besides, they presented no surface deformations, which indicates the pigments are compatible with enamel. Thus, scum ashes generated in UASB reactor presented interesting characteristics to be applied as ceramic pigments.

Potencial energético de resíduos sólidos domiciliares do município de Ponta Grossa, Paraná, Brasil / Energy potencial of household solid waste (HSW) in the city of Ponta Grossa, Paraná, Brazil

RESUMO A disposição dos resíduos sólidos domiciliares (RSD) é um desafio na maior parte dos municípios brasileiros, pois é realizada sem tratamento prévio, trazendo inúmeros impactos. A utilização de incineração com recuperação energética possibilita a redução dos impactos. O objetivo deste estudo foi analisar o potencial energético dos RSD do município de Ponta Grossa, Paraná, Brasil. Para isso, foram coletadas amostras no aterro do município para a realização das análises. A caracterização gravimétrica apresentou valores de 0,28 kg kg-1 para os recicláveis, 0,44 kg kg-1 para a matéria orgânica e 0,28kg kg-1 para os rejeitos. Os conteúdos de carbono fixo variaram de 0,06 a 0,09 kg kg-1, os de materiais voláteis de 0,75 a 0,81 kg kg-1 e os de cinzas de 0,10 a 0,18 kg kg-1. E o poder calorífico superior médio apresentou valor elevado, 19.807 kJ kg-1, se comparado com o de resíduos de outras cidades do mundo.

ABSTRACT Household solid waste (HSW) disposition is a challenge for the majority of the Brazilian cities, most held without pretreatment, which causes impacts. Incineration with recovery energy is an alternative to reduce impacts. In this study we analyzed the energy potential of HSW in the city of Ponta Grossa, Paraná, Brazil. Samples were collected at the municipal landfill for the analysis. Waste gravimetric characterization showed value 0.28 kg kg-1for recyclables, 0.44 kg kg-1for organic matter and 0.28 kg kg-1 for rejects. The fixed carbon content ranged from 0.06 to 0.09 kg kg-1, the volatile materials from 0.75 to 0.81 kg kg-1 and ashes from 0.10 to 0.18 kg kg-1. The average gross calorific value showed high value, 19,807 kJ kg-1, compared to the waste of other cities in the world.