RESUMO
Descriptors play a crucial role in electrocatalysis as they can provide valuable insights into the electrochemical performance of energy conversion and storage processes. They allow for the understanding of different catalytic activities and enable the prediction of better catalysts without relying on the time-consuming trial-and-error approaches. Hence, this comprehensive review focuses on highlighting the significant advancements in commonly used descriptors for critical electrocatalytic reactions. First, the fundamental reaction processes and key intermediates involved in several electrocatalytic reactions are summarized. Subsequently, three types of descriptors are classified and introduced based on different reactions and catalysts. These include d-band center descriptors, readily accessible intrinsic property descriptors, and spin-related descriptors, all of which contribute to a profound understanding of catalytic behavior. Furthermore, multi-type descriptors that collectively determine the catalytic performance are also summarized. Finally, we discuss the future of descriptors, envisioning their potential to integrate multiple factors, broaden application scopes, and synergize with artificial intelligence for more efficient catalyst design and discovery.
RESUMO
Competitive surface adsorption energies on catalytic surfaces constitute a fundamental aspect of modeling electrochemical reactions in aqueous environments. The conventional approach to this task relies on applying density functional theory, albeit with computationally intensive demands, particularly when dealing with intricate surfaces. In this study, we present a methodological exposition of quantifying competitive relationships within complex systems. Our methodology leverages quantum-mechanical-guided deep neural networks, deployed in the investigation of quinary high-entropy alloys composed of Mo-Cr-Mn-Fe-Co-Ni-Cu-Zn. These alloys are under examination as prospective electrocatalysts, facilitating the electrochemical synthesis of ammonia in aqueous media. Even in the most favorable scenario for nitrogen fixation identified in this study, at the transition from O and OH coverage to surface hydrogenation, the probability of N2 coverage remains low. This underscores the fact that catalyst optimization alone is insufficient for achieving efficient nitrogen reduction. In particular, these insights illuminate that system consideration with oxygen- and hydrogen-repelling approaches or high-pressure solutions would be necessary for improved nitrogen reduction within an aqueous environment.
RESUMO
When electrocatalysts are prepared, modification of the morphology is a common strategy to enhance their electrocatalytic performance. In this work, we have examined and characterized nanorods (3D) and nanosheets (2D) of nickel molybdate hydrates, which previously have been treated as the same material with just a variation in morphology. We thoroughly investigated the materials and report that they contain fundamentally different compounds with different crystal structures, chemical compositions, and chemical stabilities. The 3D nanorod structure exhibits the chemical formula NiMoO4·0.6H2O and crystallizes in a triclinic system, whereas the 2D nanosheet structures can be rationalized with Ni3MoO5-0.5x(OH)x·(2.3 - 0.5x)H2O, with a mixed valence of both Ni and Mo, which enables a layered crystal structure. The difference in structure and composition is supported by X-ray photoelectron spectroscopy, ion beam analysis, thermogravimetric analysis, X-ray diffraction, electron diffraction, infrared spectroscopy, Raman spectroscopy, and magnetic measurements. The previously proposed crystal structure for the nickel molybdate hydrate nanorods from the literature needs to be reconsidered and is here refined by ab initio molecular dynamics on a quantum mechanical level using density functional theory calculations to reproduce the experimental findings. Because the material is frequently studied as an electrocatalyst or catalyst precursor and both structures can appear in the same synthesis, a clear distinction between the two compounds is necessary to assess the underlying structure-to-function relationship and targeted electrocatalytic properties.
RESUMO
Density functional theory predictions of binding energies and reaction barriers provide invaluable data for analyzing chemical transformations in heterogeneous catalysis. For high accuracy, effects of band structure and coverage, as well as the local bond strength in both covalent and non-covalent interactions, must be reliably described and much focus has been put on improving functionals to this end. Here, we show that a correction from higher-level calculations on small metal clusters can be applied to improve periodic band structure adsorption energies and barriers. We benchmark against 38 reliable experimental covalent and non-covalent adsorption energies and five activation barriers with mean absolute errors of 2.2 kcal mol-1, 2.7 kcal mol-1, and 1.1 kcal mol-1, respectively, which are lower than for functionals widely used and tested for surface science evaluations, such as BEEF-vdW and RPBE.
Assuntos
Teoria Quântica , Elementos de Transição , Adsorção , Elementos de Transição/química , Catálise , MetaisRESUMO
ABSTRACT Purpose: To report the initial 2 years' learning curve on gonioscopy-assisted transluminal trabeculotomy performed using the thermally blunted suture technique and review the factors that could potentially affect the outcome. Methods: This retrospective study evaluated 100 eyes from 89 participants with glaucoma resistant to maximum clinical treatment, which was defined as having an intraocular pressure >21 mmHg in addition to three or four different hypotensive drugs. Intraocular pressure values at baseline, 1 week, and at 1, 2, 3, 6, 12, and 24 months of follow-up and details regarding the need of antiglaucoma medication and further glaucoma surgery were recorded. Eyes that required further surgical intervention for intraocular pressure control were considered as failure. Results: A total of 51 eyes were subjected to isolated gonioscopy-assisted transluminal trabeculotomy, and 49 eyes were subjected to gonioscopy-assisted transluminal trabeculotomy + cataract extraction at the same surgical time. A statistically significant difference was observed between overall mean follow-up intraocular pressure and mean preoperative intraocular pressure (p<0.001) in all follow-up visits. When the extent of treatment was evaluated, patients with an extension of 360° did not exhibit statistically significantly lower mean intraocular pressure than those with other extensions. Hyphema was the only complication presented in 50 eyes (50%), but all had spontaneous resolution within 4 weeks. A total of 26 eyes (26%) required additional conventional trabeculectomy due to uncontrolled intraocular pressure, especially those who previously underwent vitreoretinal surgery. Conclusions: Gonioscopy-assisted transluminal trabeculotomy, besides being an apparently safe procedure, results in satisfactory success rates even during the surgeon's initial learning curve. The technique was effective in decreasing intraocular pressure and medication burden.
RESUMO Objetivo: Reportar a curva de aprendizado dos 2 anos iniciais da trabeculotomia transluminal assistida por gonioscopia, usando a técnica de sutura termicamente atenuada e revisar os fatores que podem afetar o resultado. Métodos: Este estudo retrospectivo incluiu 100 olhos de 89 participantes com glaucoma resistente ao tratamento clínico máximo, definido como tendo pressão intraocular superior a 21mmHg, além de três ou quatro drogas hipotensoras diferentes. Pressão intraocular inicial, 1 semana, primeiro, segundo, terceiro, sexto, 12 e 24 meses de acompanhamento; necessidade de medicação antiglaucoma; necessidade de mais cirurgias anti-glaucomatosas foram registradas. Olhos que necessitaram de intervenção cirúrgica adicional para o controle da pressão intraocular foram considerados como insucesso. Resultados: Cinquenta e um olhos foram submetidos à trabeculotomia transluminal assistida por gonioscopia isolado e 49 olhos à trabeculotomia transluminal assistida por gonioscopia associado à extração de catarata no mesmo tempo cirúrgico. Houve diferença estatisticamente significativa entre a pressão intraocular média global no acompanhamento e a pressão intraocular média pré-operatória (p<0,001) em todas as visitas do acompanhamento. Ao avaliar a extensão do tratamento, os pacientes com extensão de 360 graus não apresentaram pressão intraocular média menor estatisticamente significativa em comparação com outras extensões. O hifema foi a única complicação presente em 50 olhos (50%), contudo todos tiveram resolução espontânea em quatro semanas. Um total de 26 olhos (26%) teve que ser submetido a trabeculectomia convencional adicional devido à pressão intraocular descontrolada, principalmente aqueles previamente submetidos à cirurgia vitreorretiniana. Conclusões: A trabeculotomia transluminal assistida por gonioscopia, além de ser um procedimento aparentemente seguro, apresenta taxas de sucesso satisfatórias, mesmo durante a curva de aprendizado inicial do cirurgião. A técnica foi efetiva em reduzir a pressão intraocular e uso de medicamentos.
RESUMO
PURPOSE: To report the initial 2 years' learning curve on gonioscopy-assisted transluminal trabeculotomy performed using the thermally blunted suture technique and review the factors that could potentially affect the outcome. METHODS: This retrospective study evaluated 100 eyes from 89 participants with glaucoma resistant to maximum clinical treatment, which was defined as having an intraocular pressure >21 mmHg in addition to three or four different hypotensive drugs. Intraocular pressure values at baseline, 1 week, and at 1, 2, 3, 6, 12, and 24 months of follow-up and details regarding the need of antiglaucoma medication and further glaucoma surgery were recorded. Eyes that required further surgical intervention for intraocular pressure control were considered as failure. RESULTS: A total of 51 eyes were subjected to isolated gonioscopy-assisted transluminal trabeculotomy, and 49 eyes were subjected to gonioscopy-assisted transluminal trabeculotomy + cataract extraction at the same surgical time. A statistically significant difference was observed between overall mean follow-up intraocular pressure and mean preoperative intraocular pressure (p<0.001) in all follow-up visits. When the extent of treatment was evaluated, patients with an extension of 360° did not exhibit statistically significantly lower mean intraocular pressure than those with other extensions. Hyphema was the only complication presented in 50 eyes (50%), but all had spontaneous resolution within 4 weeks. A total of 26 eyes (26%) required additional conventional trabeculectomy due to uncontrolled intraocular pressure, especially those who previously underwent vitreoretinal surgery. CONCLUSIONS: Gonioscopy-assisted transluminal trabeculotomy, besides being an apparently safe procedure, results in satisfactory success rates even during the surgeon's initial learning curve. The technique was effective in decreasing intraocular pressure and medication burden.
Assuntos
Glaucoma de Ângulo Aberto , Trabeculectomia , Seguimentos , Glaucoma de Ângulo Aberto/cirurgia , Gonioscopia , Humanos , Pressão Intraocular , Estudos Retrospectivos , Esclera , Resultado do TratamentoRESUMO
PURPOSE: To evaluate the ability of confocal near-infrared reflectance (NIR) to diagnose retrograde microcystic maculopathy (RMM) in eyes with temporal visual field (VF) loss and optic atrophy from chiasmal compression. To compare NIR findings with optical coherence tomography (OCT) findings in the same group of patients. METHODS: Thirty-four eyes (26 patients) with temporal VF loss from chiasmal compression and 41 healthy eyes (22 controls) underwent NIR fundus photography, and macular OCT scanning. VF loss was estimated and retinal layers thickness were measured on OCT. Two examiners blinded to the diagnosis randomly examined NIR images for the presence of hyporeflective abnormality (HA) and OCT scans for the presence of microcystic macular abnormalities (MMA). The total average and hemi-macular HA area and number of microcysts were determined. The groups were compared and the level of agreement was estimated. RESULTS: The OCT-measured macular retinal nerve fiber and ganglion cell layers were thinner and the inner nuclear layer was thicker in patients compared to controls. HA and MMA were detected in 22 and 12 patient eyes, respectively, and in 0 controls (p<0.001, both comparisons). HA was significantly more frequent than MMA in patients with optic atrophy, and agreement between HA and MMA (both total and hemi-macular) was fair (kappa range: 0.24-0.29). The mean HA area was significantly greater in the nasal than temporal hemi-macula. A re-analysis of the 14 eyes with discrepant findings allowed to confirm RMM in 20 eyes (20/34) indicating that OCT detected RMM in 12 and missed it in 8 eyes. On the other hand, NIR correctly detected 18 out of 20 eyes, overcalled 4 and missed 2. CONCLUSIONS: RMM is a frequent finding in eyes with severe VF loss from long-standing chiasmal compression. NIR photography appears to be more sensitive than OCT for detecting RMM and may be useful as screening method for its presence.
Assuntos
Fundo de Olho , Degeneração Macular , Síndromes de Compressão Nervosa , Quiasma Óptico/diagnóstico por imagem , Doenças do Nervo Óptico , Tomografia de Coerência Óptica , Adulto , Técnicas de Diagnóstico Oftalmológico , Feminino , Humanos , Degeneração Macular/diagnóstico por imagem , Degeneração Macular/etiologia , Masculino , Pessoa de Meia-Idade , Síndromes de Compressão Nervosa/complicações , Síndromes de Compressão Nervosa/diagnóstico por imagem , Doenças do Nervo Óptico/complicações , Doenças do Nervo Óptico/diagnóstico por imagem , Estudos ProspectivosRESUMO
OBJECTIVES: To determine the effect of panretinal photocoagulation (PRP) on the peripapillary retinal nerve fiber layer (RNFL) in nonglaucomatous patients with proliferative diabetic retinopathy (PDR). METHODS: This is a prospective, single center, observational study. Thirty-eight eyes of 26 diabetic patients underwent PRP for proliferative diabetic retinopathy. Peripapillary RNFL thickness was measured using scanning laser polarimetry (SLP) with variable corneal compensation (GDx VCC; by Carl Zeiss Meditec, Dublin, CA) and spectral-domain optical coherence tomography (OCT) (Heidelberg Spectralis, Carlsbad, USA) at baseline and 12 months after PRP was performed. RESULTS: Thirty-eight eyes of 26 patients (15 female) with a mean age of 53.7 years (range 26 to 74 years) were recruited. No significant difference was found among all RNFL thickness parameters tested by GDx VCC software (p=0.952, 0.464 and 0.541 for temporal-superior-nasal-inferior-temporal (TSNIT) average, superior average, inferior average, respectively). The nerve fiber indicator (NFI) had a nonsignificant increase (p=0.354). The OCT results showed that the average RNFL thickness (360° measurement) decreased nonsignificantly from 97.2 mm to 96.0 mm at 1 year post-PRP (p=0.469). There was no significant difference when separately analyzing all the peripapillary sectors (nasal superior, temporal superior, temporal, temporal inferior, nasal inferior and nasal thickness). CONCLUSION: Our results suggest that PRP, as performed in our study, does not cause significant changes in peripapillary RNFL in diabetic PDR patients after one year of follow-up.
Assuntos
Retinopatia Diabética/terapia , Fotocoagulação a Laser/métodos , Fibras Nervosas , Adulto , Idoso , Retinopatia Diabética/diagnóstico por imagem , Feminino , Seguimentos , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Prospectivos , Tomografia de Coerência Óptica , Resultado do Tratamento , Acuidade VisualRESUMO
Batteries based on Ca hold the promise to leapfrog ahead regarding increases in energy densities and are especially attractive as Ca is the 5th most abundant element in the Earth's crust. The viability of Ca metal anodes has recently been shown by approaches that either use wide potential window electrolytes at moderately elevated temperatures or THF-based electrolytes at room temperature. This paper provides realistic estimates of the practical energy densities for Ca-based rechargeable batteries at the cell level, calculated using open source models for several concepts. The results from the Ca metal anode batteries indicate that doubled or even tripled energy density as compared to the state-of-the-art Li-ion batteries is viable if a practical proof-of-concept can be achieved.
RESUMO
BACKGROUND: Pupil dilation and mydriasis maintenance throughout vitreoretinal surgeries are important to allow satisfactory fundus visualization and reduce risk of complications. The purpose of this study is to evaluate the role of subconjunctival epinephrine 0.1% injection in mydriasis maintenance during vitrectomy. METHODS: Ninety-nine consecutive patients undergoing vitrectomy were enrolled. All subjects were preoperatively dilated with tropicamide 1%. Each patient was randomly allocated either in the epinephrine or placebo group. In epinephrine group, patients were submitted to a 0.2 cc subconjunctival injection of a 0.1% epinephrine solution just before first incisions. In placebo group, the same procedure was performed with 0.2 cc of saline 0.9%. Horizontal pupil diameter was measured with calipers before and in the end of the procedure. RESULTS: Patients in the epinephrine group showed a significantly larger mean pupil diameter in the end of the surgery compared to placebo. There was a significant increase of mean pupil diameter from the beginning to the end of the surgery in such patients. Blood pressure was significantly higher in the epinephrine group than in placebo group. No other adverse effects were noted. CONCLUSION: Subconjunctival epinephrine is effective for maintaining and increasing pupil size during vitrectomy, compared to placebo. Caution should be taken regarding intraoperative blood pressure levels. TRIAL REGISTRATION: RBR; RBR-3qzhvg; Registered 8 May 2018-Retrospectively registered, http://www.ensaiosclinicos.gov.br/rg/RBR-3qzhvg/.
RESUMO
Graphene's emergence can be viewed as a positive upheaval in 2D materials research. Along the same line, the realization of a related elemental 2D material, borophene, is another breakthrough. To circumvent the stability issues of borophene, which is reported to have been synthesized on metallic substrates under extreme conditions, hydrogenation of borophene (otherwise called as borophane or hydrogen boride or boron hydride) has been a plausible solution, but only proposed computationally. A recent report (H. Nishino, T. Fujita, N. T. Cuong, S. Tominaka, M. Miyauchi, S. Iimura, A. Hirata, N. Umezawa, S. Okada, E. Nishibori, A. Fujino, T. Fujimori, S. Ito, J. Nakamura, H. Hosono and T. Kondo, J. Am. Chem. Soc., 2017, 139(39), 13761-13769) brings to fore its experimental realization. Our current study delves into the possibilities of employing this intriguing 2D hydrogen boride as anodes in Li/Na ion batteries. Using first-principles density functional theory methods, we computed relevant properties such as the ion (Li/Na) adsorption behavior, the possible pathways of ionic diffusion with the estimation of barriers as well as the theoretical specific capacities and average voltages to uniquely demonstrate that this material is of particular significance for battery applications. It is noted that the use of hydrogen boride leads to a high specific capacity of 861.78 mA h g-1 for Li ions, which is remarkably higher than the value reported in relation to its computationally predicted structure. Furthermore, Na ion intercalation leads to negative voltage profiles, implying the unsuitability of 2D hydrogen boride for this particular ion. Our findings are timely and pertinent towards adding insightful details relevant to the progress of applications of 2D materials for energy storage.
RESUMO
A long-standing effort has been devoted for the development of high energy density cathodes both for Li- and Na-ion batteries (LIBs and SIBs). The scientific communities in battery research primarily divide the Li- and Na-ion cathode materials into two categories: layered oxides and polyanionic compounds. Researchers are trying to improve the energy density of such materials through materials screening by mixing the transition metals or changing the concentration of Li or Na in the polyanionic compounds. Due to the fact that there is more stability in the polyanionic frameworks, batteries based on these materials mostly provide a prolonged cycling life as compared to the layered oxide materials. Nevertheless, the bottleneck for such compounds is the weight penalty from polyanionic groups that results into the lower capacity. The anion engineering could be considered as an essential way out to design such polyanionic compounds to resolve this issue and to fetch improved cathode performance. In this topical review we present a systematic overview of the polyanionic cathode materials used for LIBs and SIBs. We will also present the computational methodologies that have become significantly relevant for battery research. We will make an attempt to provide the theoretical insight with a current development in sulfate (SO4), silicate (SiO4) and phosphate (PO4) based cathode materials for LIBs and SIBs. We will end this topical review with the future outlook, that will consist of the next generation organic electrode materials, mainly based on conjugated carbonyl compounds.
RESUMO
We discuss here a unique flexible non-carbonaceous layered host, namely, metal titanium niobates (M-Ti-niobate, M: Al3+ , Pb2+ , Sb3+ , Ba2+ , Mg2+ ), which can synergistically store both lithium ions and sodium ions via a simultaneous intercalation and alloying mechanisms. M-Ti-niobate is formed by ion exchange of the K+ ions, which are specifically located inside galleries between the layers formed by edge and corner sharing TiO6 and NbO6 octahedral units in the sol-gel synthesized potassium titanium niobate (KTiNbO5 ). Drastic volume changes (approximately 300-400 %) typically associated with an alloying mechanism of storage are completely tackled chemically by the unique chemical composition and structure of the M-Ti-niobates. The free space between the adjustable Ti/Nb octahedral layers easily accommodates the volume changes. Due to the presence of an optimum amount of multivalent alloying metal ions (50-75 % of total K+ ) in the M-Ti-niobate, an efficient alloying reaction takes place directly with ions and completely eliminates any form of mechanical degradation of the electroactive particles. The M-Ti-niobate can be cycled over a wide voltage range (as low as 0.01â V) and displays remarkably stable Li+ and Na+ ion cyclability (>2 Li+ /Na+ per formula unit) for widely varying current densities over few hundreds to thousands of successive cycles. The simultaneous intercalation and alloying storage mechanisms is also studied within the density functional theory (DFT) framework. DFT expectedly shows a very small variation in the volume of Al-titanium niobate following lithium alloying. Moreover, the theoretical investigations also conclusively support the occurrence of the alloying process of Li ions with the Al ions along with the intercalation process during discharge. The M-Ti-niobates studied here demonstrate a paradigm shift in chemical design of electrodes and will pave the way for the development of a multitude of improved electrodes for different battery chemistries.
RESUMO
PURPOSE: The aims of this study are to compare optical coherence tomography (OCT)-measured macular retinal layers in eyes with permanent temporal hemianopia from chiasmal compression and control eyes; to compare regular and slow-flash multifocal electroretinography (mfERG) in patients and controls; and to assess the correlation between OCT, mfERG, and central visual field (SAP) data. METHODS: Forty-three eyes of 30 patients with permanent temporal hemianopia due to pituitary tumors who were previously submitted to chiasm decompression and 37 healthy eyes of 19 controls were submitted to macular spectral domain OCT, mfERG, and 10-2 SAP testing. After segmentation, the thickness of the macular retinal nerve fiber layer (RNFL), ganglion cell layer (GCL), inner plexiform layer (IPL), inner nuclear layer (INL), outer plexiform layer (OPL), outer nuclear layer, and photoreceptor layer (PRL) was measured. Amplitudes and oscillatory potentials (OPs) were measured on regular and slow-flash mfERG, respectively, and expressed as the mean values per quadrant and hemifield. RESULTS: RNFL, GCL, and IPL thickness measurements were significantly reduced in all quadrants, whereas INL, OPL, and PRL thicknesses were significantly increased in the nasal quadrants in patients compared to those in controls. Significant correlations between OCT and 10-2 SAP measurements were positive for the RNFL, GCL, and IPL and negative for the INL, OPL, and PRL. OPs and mfERG N1 amplitudes were significantly reduced in the nasal hemiretina of patients. Significant correlations were found between OP and mfERG amplitudes for inner and outer nasal hemiretina OCT measurements, respectively. CONCLUSION: Patients with permanent temporal hemianopia from previously treated chiasmal compression demonstrated significant thinning of the RNFL, GCL, IPL, and thickening of the INL, OPL, and PRL associated with reduced OP and mfERG N1 amplitudes, suggesting that axonal injury to the inner retina leads to secondary damage to the outer retina in this condition.
RESUMO
Borophene, single atomic-layer sheet of boron ( Science 2015 , 350 , 1513 ), is a rather new entrant into the burgeoning class of 2D materials. Borophene exhibits anisotropic metallic properties whereas its hydrogenated counterpart borophane is reported to be a gapless Dirac material lying on the same bench with the celebrated graphene. Interestingly, this transition of borophane also rendered stability to it considering the fact that borophene was synthesized under ultrahigh vacuum conditions on a metallic (Ag) substrate. On the basis of first-principles density functional theory computations, we have investigated the possibilities of borophane as a potential Li/Na-ion battery anode material. We obtained a binding energy of -2.58 (-1.08 eV) eV for Li (Na)-adatom on borophane and Bader charge analysis revealed that Li(Na) atom exists in Li+(Na+) state. Further, on binding with Li/Na, borophane exhibited metallic properties as evidenced by the electronic band structure. We found that diffusion pathways for Li/Na on the borophane surface are anisotropic with x direction being the favorable one with a barrier of 0.27 and 0.09 eV, respectively. While assessing the Li-ion anode performance, we estimated that the maximum Li content is Li0.445B2H2, which gives rises to a material with a maximum theoretical specific capacity of 504 mAh/g together with an average voltage of 0.43 V versus Li/Li+. Likewise, for Na-ion the maximum theoretical capacity and average voltage were estimated to be 504 mAh/g and 0.03 V versus Na/Na+, respectively. These findings unambiguously suggest that borophane can be a potential addition to the map of Li and Na-ion anode materials and can rival some of the recently reported 2D materials including graphene.
RESUMO
Conducting polymers are being considered promising candidates for sustainable organic batteries mainly due to their fast electron transport properties and high recyclability. In this work, the key properties of polythiophene and polypyridine have been assessed through a combined theoretical and experimental study focusing on such applications. A theoretical protocol has been developed to calculate redox potentials in solution within the framework of the density functional theory and using continuous solvation models. Here, the evolution of the electrochemical properties of solvated oligomers as a function of the length of the chain is analyzed and then the polymer properties are estimated via linear regressions using ordinary least square. The predicted values were verified against our electrochemical experiments. This protocol can now be employed to screen a large database of compounds in order to identify organic electrodes with superior properties.
RESUMO
Electrochemical energy storage has recently seen tremendous emphasis being placed on the large-scale (power) grid storage. Sodium-ion batteries are capable of achieving this goal with economic viability. In a recent breakthrough in sodium-ion battery research, the alluaudite framework (Na2Fe2(SO4)3) has been reported, with the highest Fe3+/Fe2+ redox potential (ca. 3.8 V, Barpanda, et al., Nat. Commun., 2014, 5, 4358). Exploring this high-voltage sodium insertion system, we report the discovery of Na2+2xCo2-x(SO4)3 (x = 0.16) as a new member of the alluaudite class of cathode. Stabilized by low-temperature solid-state synthesis (T ≤ 350 °C), this novel Co-based compound assumes a monoclinic structure with C2/c symmetry, which undergoes antiferromagnetic ordering below 10.2 K. Isotypical to the Fe-homologue, it forms a complete family of solid-solution Na2+2x(Fe1-yCoy)2-x(SO4)3 [y = 0-1]. Ab initio DFT analysis hints at potential high voltage operation at 4.76-5.76 V (vs. Na), depending on the degree of desodiation involving a strong participation of the oxygen sub-lattice. With the development of safe organic electrolytes, Na2+2xCo2-x(SO4)3 can work as a cathode material (â¼5 V) for sodium-ion batteries.
RESUMO
Comprehensive understanding of the charge transport mechanism in the intrinsic structure of an electrode material is essential in accounting for its electrochemical performance. We present here systematic experimental and theoretical investigations of Li(+)-ion diffusion in a novel layered material, viz. lithium titanium niobate. Lithium titanium niobate (exact composition Li0.55K0.45TiNbO5·1.06H2O) is obtained from sol-gel synthesized potassium titanium niobate (KTiNbO5) by an ion-exchange method. The Li(+)-ions are inserted and de-inserted preferentially into the galleries between the octahedral layers formed by edge and corner sharing TiO6 and NbO6 octahedral units and the effective chemical diffusion coefficient, is estimated to be 3.8 × 10(-11) cm(2) s(-1) using the galvanostatic intermittent titration technique (GITT). Calculations based on density functional theory (DFT) strongly confirm the anisotropic Li(+)-ion diffusion in the interlayer galleries and that Li(+)-ions predominantly diffuse along the crystallographic b-direction. The preferential Li(+)-ion diffusion along the b-direction is assisted by line-defects, which are observed to be higher in concentration along the b-direction compared to the a- and c-directions, as revealed by high resolution electron microscopy. The Li-Ti niobate can be cycled to low voltages (≈0.2 V) and show stable and satisfactory battery performance over 100 cycles. Due to the possibility of cycling to low voltages, cyclic voltammetry and X-ray photoelectron spectroscopy convincingly reveal the reversibility of Ti(3+) â Ti(2+) along with Ti(4+) â Ti(3+) and Nb(5+) â Nb(4+).
RESUMO
Exploring future cathode materials for sodium-ion batteries, alluaudite class of Na2Fe(II)2(SO4)3 has been recently unveiled as a 3.8 V positive insertion candidate (Barpanda et al. Nat. Commun. 2014, 5, 4358). It forms an Fe-based polyanionic compound delivering the highest Fe-redox potential along with excellent rate kinetics and reversibility. However, like all known SO4-based insertion materials, its synthesis is cumbersome that warrants careful processing avoiding any aqueous exposure. Here, an alternate low temperature ionothermal synthesis has been described to produce the alluaudite Na2+2xFe(II)2-x(SO4)3. It marks the first demonstration of solvothermal synthesis of alluaudite Na2+2xM(II)2-x(SO4)3 (M = 3d metals) family of cathodes. Unlike classical solid-state route, this solvothermal route favors sustainable synthesis of homogeneous nanostructured alluaudite products at only 300 °C, the lowest temperature value until date. The current work reports the synthetic aspects of pristine and modified ionothermal synthesis of Na2+2xFe(II)2-x(SO4)3 having tunable size (300 nm â¼5 µm) and morphology. It shows antiferromagnetic ordering below 12 K. A reversible capacity in excess of 80 mAh/g was obtained with good rate kinetics and cycling stability over 50 cycles. Using a synergistic approach combining experimental and ab initio DFT analysis, the structural, magnetic, electronic, and electrochemical properties and the structural limitation to extract full capacity have been described.
RESUMO
Sodium-ion-based batteries have evolved as excellent alternatives to their lithium-ion-based counterparts due to the abundance, uniform geographical distribution and low price of Na resources. In the pursuit of sodium chemistry, recently the alluaudite framework Na2M2(SO4)3 has been unveiled as a high-voltage sodium insertion system. In this context, the framework of density functional theory has been applied to systematically investigate the crystal structure evolution, density of states and charge transfer with sodium ions insertion, and the corresponding average redox potential, for Na2M2(SO4)3 (M = Fe, Mn, Co and Ni). It is shown that full removal of sodium atoms from the Fe-based device is not a favorable process due to the 8% volume shrinkage. The imaginary frequencies obtained in the phonon dispersion also reflect this instability and the possible phase transition. This high volume change has not been observed in the cases of the Co- and Ni-based compounds. This is because the redox reaction assumes a different mechanism for each of the compounds investigated. For the polyanion with Fe, the removal of sodium ions induces a charge reorganization at the Fe centers. For the Mn case, the redox process induces a charge reorganization of the Mn centers with a small participation of the oxygen atoms. The Co and Ni compounds present a distinct trend with the redox reaction occurring with a strong participation of the oxygen sublattice, resulting in a very small volume change upon desodiation. Moreover, the average deintercalation potential for each of the compounds has been computed. The implications of our findings have been discussed both from the scientific perspective and in terms of technological aspects.