Supramolecular Chemistry of Carbon-Based Dots Offers Widespread Opportunities.

Carbon dots are an emerging class of nanomaterials that has recently attracted considerable attention for applications that span from biomedicine to energy. These photoluminescent carbon nanoparticles are defined by characteristic sizes of <10 nm, a carbon-based core and various functional groups at their surface. Although the surface groups are widely used to establish non-covalent bonds (through electrostatic interactions, coordinative bonds, and hydrogen bonds) with various other (bio)molecules and polymers, the carbonaceous core could also establish non-covalent bonds (ππ stacking or hydrophobic interactions) with π-extended or apolar compounds. The surface functional groups, in addition, can be modified by various post-synthetic chemical procedures to fine-tune the supramolecular interactions. Our contribution categorizes and analyzes the interactions that are commonly used to engineer carbon dots-based materials and discusses how they have allowed preparation of functional assemblies and architectures used for sensing, (bio)imaging, therapeutic applications, catalysis, and devices. Using non-covalent interactions as a bottom-up approach to prepare carbon dots-based assemblies and composites can exploit the unique features of supramolecular chemistry, which include adaptability, tunability, and stimuli-responsiveness due to the dynamic nature of the non-covalent interactions. It is expected that focusing on the various supramolecular possibilities will influence the future development of this class of nanomaterials.

Carbon dots conjugated to SN38 for improved colorectal anticancer therapy.

Irinotecan (CTP-11) is one of the standard therapies for colorectal cancer (CRC). CTP-11 is enzymatically converted to the hydrophobic 7-ethyl-10-hydroxycamptothecin (SN38), a one hundred-fold more active metabolite. Conjugation of hydrophobic anticancer drugs to nanomaterials is a strategy to improve their solubility, efficacy, and selectivity. Carbon dots (CDs) have garnered interest for their small sizes (<10 â€‹nm), low toxicity, high water solubility, and bright fluorescence. This paper describes the use of CDs to improve drug vehiculation, stability, and chemotherapeutic efficiency of SN38 through a direct intracellular uptake in CRC. The covalent conjugation of SN38 to CDs via a carbamate bond provides a CD-SN38 hybrid material for slow, sustained, and pH-responsive drug release. CD-SN38 successfully penetrates the CRC cells with a release in the nucleus affecting first the cell cycle and then the cytoskeleton. Moreover, CD-SN38 leads to a deregulation of the extracellular matrix (ECM), one of the major components of the cancer niche considered a possible target therapy for reducing the cancer progression. This work shows the combined therapeutic and imaging potential of CD-based hybrid materials for the treatment of CRC. Future efforts for targeted therapy of chronic diseases characterized by altered ECM deposition, such as chronic kidney disease and chronic allograft nephropathy in kidney transplant patients are envisaged.

Efficient and Stable Perovskite Solar Cells based on Nitrogen-Doped Carbon Nanodots.

The role of graphitic and amorphous nitrogen-doped carbon dots (N-CDs) as additives for perovskite solar cells (PSCs) is investigated. A detailed study of N-CDs: perovskite (PVSK) blends through X-ray diffraction, nuclear magnetic resonance, field emission scanning electron microscopy, UV-vis, and photoluminescence spectroscopy reveals the existence of interactions between N-CDs and PVSK. The amorphous or graphitic nature of these carbon nanoforms, as well as the interactions between CDs and PVSK, clearly determines the photovoltaic outcome of the PSCs. Thus, a small amount of graphitic carbon dots (g-N-CDs) leads to more-stable PSCs, while maintaining and even improving the power conversion efficiency (PCE). In addition, the long-term evaluation of the g-N-CDs-containing cells shows improvement of the PCE over time, up to 109% of the initial efficiency after 40 days while the reference performance is dropped to 86%.

Selective visible-light photocatalysis of acetylene to ethylene using a cobalt molecular catalyst and water as a proton source.

The production of polymers from ethylene requires the ethylene feed to be sufficiently purified of acetylene contaminant. Accomplishing this task by thermally hydrogenating acetylene requires a high temperature, an external feed of H2 gas and noble-metal catalysts. It is not only expensive and energy-intensive, but also prone to overhydrogenating to ethane. Here we report a photocatalytic system that reduces acetylene to ethylene with ≥99% selectivity under both non-competitive (no ethylene co-feed) and competitive (ethylene co-feed) conditions, and near 100% conversion under the latter industrially relevant conditions. Our system uses a molecular catalyst based on earth-abundant cobalt operating under ambient conditions and sensitized by either [Ru(bpy)3]2+ or an inexpensive organic semiconductor (metal-free mesoporous graphitic carbon nitride) under visible light. These features and the use of water as a proton source offer advantages over current hydrogenation technologies with respect to selectivity and sustainability.

A multifunctional chemical toolbox to engineer carbon dots for biomedical and energy applications.

Photoluminescent carbon nanoparticles, or carbon dots, are an emerging class of materials that has recently attracted considerable attention for biomedical and energy applications. They are defined by characteristic sizes of <10 nm, a carbon-based core and the possibility to add various functional groups at their surface for targeted applications. These nanomaterials possess many interesting physicochemical and optical properties, which include tunable light emission, dispersibility and low toxicity. In this Review, we categorize how chemical tools impact the properties of carbon dots. We look for pre- and postsynthetic approaches for the preparation of carbon dots and their derivatives or composites. We then showcase examples to correlate structure, composition and function and use them to discuss the future development of this class of nanomaterials.

Influence of the chirality of carbon nanodots on their interaction with proteins and cells.

Carbon nanodots with opposite chirality possess the same major physicochemical properties such as optical features, hydrodynamic diameter, and colloidal stability. Here, a detailed analysis about the comparison of the concentration of both carbon nanodots is carried out, putting a threshold to when differences in biological behavior may be related to chirality and may exclude effects based merely on differences in exposure concentrations due to uncertainties in concentration determination. The present study approaches this comparative analysis evaluating two basic biological phenomena, the protein adsorption and cell internalization. We find how a meticulous concentration error estimation enables the evaluation of the differences in biological effects related to chirality.

Quantum Dot-Sensitized Photoreduction of CO2 in Water with Turnover Number > 80,000.

Climate change and global energy demands motivate the search for sustainable transformations of carbon dioxide (CO2) to storable liquid fuels. Photocatalysis is a pathway for direct conversion of CO2 to CO, one step within light-powered reaction networks that could, if efficient enough, transform the solar energy conversion landscape. To date, the best performing photocatalytic CO2 reduction systems operate in nonaqueous solvents, but technologically viable solar fuels networks will likely operate in water. Here we demonstrate catalytic photoreduction of CO2 to CO in pure water at pH 6-7 with an unprecedented combination of performance parameters: turnover number (TON(CO)) = 72,484-84,101, quantum yield (QY) = 0.96-3.39%, and selectivity (SCO) > 99%, using CuInS2 colloidal quantum dots (QDs) as photosensitizers and a Co-porphyrin catalyst. At higher catalyst concentration, the system reaches QY = 3.53-5.23%. The performance of the QD-driven system greatly exceeds that of the benchmark aqueous system (926 turnovers with a quantum yield of 0.81% and selectivity of 82%), due primarily to (i) electrostatic attraction of the QD to the catalyst, which promotes fast multielectron delivery and colocalization of protons, CO2, and catalyst at the source of photoelectrons, and (ii) termination of the QD's ligand shell with free amines, which capture CO2 as carbamic acid that serves as a reservoir for CO2, effectively increasing its solubility in water, and lowers the onset potential for catalytic CO2 reduction by the Co-porphyrin. The breakthrough efficiency achieved in this work represents a nonincremental step in the realization of reaction networks for direct solar-to-fuel conversion.

Lighting up the Electrochemiluminescence of Carbon Dots through Pre- and Post-Synthetic Design.

Carbon dots (CDs), defined by their size of less than 10 nm, are a class of photoluminescent (PL) and electrochemiluminescent (ECL) nanomaterials that include a variety of carbon-based nanoparticles. However, the control of their properties, especially ECL, remains elusive and afflicted by a series of problems. Here, the authors report CDs that display ECL in water via coreactant ECL, which is the dominant mechanism in biosensing applications. They take advantage of a multicomponent bottom-up approach for preparing and studying the luminescence properties of CDs doped with a dye acting as PL and ECL probe. The dependence of luminescence properties on the surface chemistry is further reported, by investigating the PL and ECL response of CDs with surfaces rich in primary, methylated, or propylated amino groups. While precursors that contribute to the core characterize the PL emission, the surface states influence the efficiency of the excitation-dependent PL emission. The ECL emission is influenced by surface states from the organic shell, but states of the core strongly interact with the surface, influencing the ECL efficiency. These findings offer a framework of pre- and post-synthetic design strategies to improve ECL emission properties, opening new opportunities for exploring biosensing applications of CDs.

Snapshots into carbon dots formation through a combined spectroscopic approach.

The design of novel carbon dots with ad hoc properties requires a comprehensive understanding of their formation mechanism, which is a complex task considering the number of variables involved, such as reaction time, structure of precursors or synthetic protocol employed. Herein, we systematically investigated the formation of carbon nanodots by tracking structural, chemical and photophysical features during the hydrothermal synthesis. We demonstrate that the formation of carbon nanodots consists of 4 consecutive steps: (i) aggregation of small organic molecules, (ii) formation of a dense core with an extended shell, (iii) collapse of the shell and (iv) aromatization of the core. In addition, we provide examples of routes towards tuning the core-shell design, synthesizing five novel carbon dots that all consist of an electron-dense core covered by an amine rich ligand shell.

Light-Controlled Regioselective Synthesis of Fullerene Bis-Adducts.

Multi-functionalization and isomer-purity of fullerenes are crucial tasks for the development of their chemistry in various fields. In both current main approaches-tether-directed covalent functionalization and supramolecular masks-the control of regioselectivity requires multi-step synthetic procedures to prepare the desired tether or mask. Herein, we describe light-responsive tethers, containing an azobenzene photoswitch and two malonate groups, in the double cyclopropanation of [60]fullerene. The formation of the bis-adducts and their spectroscopic and photochemical properties, as well as the effect of azobenzene photoswitching on the regiochemistry of the bis-addition, have been studied. The behavior of the tethers depends on the geometry of the connection between the photoactive core and the malonate moieties. One tether lead to a strikingly different adduct distribution for the E and Z isomers, indicating that the covalent bis-functionalization of C60 can be controlled by light.

Symmetry-Breaking Charge-Transfer Chromophore Interactions Supported by Carbon Nanodots.

Carbon dots (CDs) and their derivatives are useful platforms for studying electron-donor/acceptor interactions and dynamics therein. Herein, we couple amorphous CDs with phthalocyanines (Pcs) that act as electron donors with a large extended π-surface and intense absorption across the visible range of the solar spectrum. Investigations of the intercomponent interactions by means of steady-state and pump-probe transient absorption spectroscopy reveal symmetry-breaking charge transfer/separation and recombination dynamics within pairs of phthalocyanines. The CDs facilitate the electronic interactions between the phthalocyanines. Thus, our findings suggest that CDs could be used to support electronic couplings in multichromophoric systems and further increase their applicability in organic electronics, photonics, and artificial photosynthesis.

Preparation, functionalization and characterization of engineered carbon nanodots.

Carbon-based dots (CDs) and their functionalized (nano)composites have recently attracted attention due to their seemingly easy preparation and numerous potential applications, ranging from those in the biomedical field (i.e., imaging and drug delivery) to those in (opto)electronics (i.e., solar cells and LEDs). This protocol details step-by-step procedures for synthesis, purification, functionalization and characterization of nitrogen-doped carbon nanodots (NCNDs), which we have been preparing for the past few years. First, we describe the bottom-up synthesis of NCNDs, starting with the use of molecular precursors (arginine (Arg) and ethylenediamine (EDA)) and making use of microwave-assisted hydrothermal heating. We also provide guidelines for the purification of these materials, through either dialysis or low-pressure size-exclusion chromatography (SEC). Second, we outline post-functionalization procedures for the surface modification of NCNDs, such as alkylation and amidation reactions. Third, we provide instructions for the preparation of NCNDs with different properties, such as color emission, electrochemistry and chirality. Given the fast evolution of preparations and applications of CDs, issues that might arise from artifacts, errors and impurities should be avoided. In this context, the present protocol aims to provide details and guidelines for the synthesis of high-quality nanomaterials with high reproducibility, for various applications. Furthermore, specific needs might require the CDs to be prepared by different synthetic procedures and/or from different molecular precursors, but such CDs can still benefit from the purification and characterization procedures outlined in this protocol. The sample preparation takes various time frames, ranging from 4 to 18 d, depending on the adopted synthesis and purification steps.

Colloidally Stable CdS Quantum Dots in Water with Electrostatically Stabilized Weak-Binding, Sulfur-Free Ligands.

Colloidal quantum dot (QD) photocatalysts have the electrochemical and optical properties to be highly effective for a range of redox reactions. QDs are proven photo-redox catalysts for a variety of reactions in organic solvents but are less prominent for aqueous reactions. Aqueous QD photocatalysts require hydrophilic ligand shells that provide long-term colloidal stability but are not so tight-binding as to prevent catalytic substrates from accessing the QD surface. Common thiolate ligands, which also poison many co-catalysts and undergo photo-oxidative desorption, are therefore often not an option. This paper describes a framework for the design of water-solubilizing ligands that are in dynamic exchange on and off the QD surface, but still provide long-term colloidal stability to CdS QDs. The binding affinity and inter-ligand electrostatic interactions of a bifunctional ligand, aminoethyl phosphonic acid (AEP), are tuned with the pH of the dispersion. The key to colloidal stability is electrostatic stabilization of the monolayer. This work demonstrates a means of mimicking the stabilizing power of a thiolate-bound ligand with a zwitterionic tail group, but without the thiolate binding group.

Design, Synthesis, and Functionalization Strategies of Tailored Carbon Nanodots.

Over the past decades, considerable efforts have been devoted to synthesizing nanostructured materials with specific properties that ultimately shape their function. In the carbon nanotechnology era, for nanomaterials such as fullerenes, carbon nanotubes, and graphene, the main focus has been on the organic functionalization of these nanostructures, in order to tailor their processability and applicability. Carbon-based dots, quasi-spherical nanoparticles with a shape under 10 nm, have popped up into this context especially due to their versatile synthesis and intriguing properties, mainly their fluorescence emission. Even though they were discovered through the top-down route of cutting large carbon nanostructures, in recent years the ease and flexibility of the bottom-up synthesis have allowed this carbon-based class of nanomaterials to advance at a striking pace. However, the fast speed of research and publication rate have caused a few issues that affect their classification, purity criteria, and fluorescence mechanisms. As these are being progressively addressed, the true potential and applicability of this nanomaterial has started to unravel. In this Ariticle, we describe our efforts toward the synthesis, purification, characterization, and applications of carbon nanodots. Special attention was dedicated to designing and customizing the optoelectronic properties of these nanomaterials, as well as their applications in hybrid and composite systems. Our approach is centered on a bottom-up, microwave-assisted hydrothermal synthesis. We have successfully exploited a multicomponent synthetic approach, using arginine and ethylenediamine as starting materials. By controlling the reaction conditions, in just 3 min, blue-emitting carbon nanodots become accessible. We have improved this approach by designing and tuning the emissive, electrochemical, and chiroptical properties of these nanoforms. On the other hand, we have used postfunctionalization reactions as a tool for conjugation with suitable partners and for further tuning the surface chemistry. The combination of these two approaches has produced a number of carbon nanodots that can be investigated in fields ranging from biology to materials chemistry and in applications spanning from nanomedicine to energy conversion.

pH-Dependent structure of water-exposed surfaces of CdSe quantum dots.

Increasing negative charge density at the surfaces of CdSe quantum dots (QDs) effects a bathochromic shift of their ground state optical spectra with increasing pH due to electrostatic and chemical modifications at the QD surface. These modifications are enabled by weakly-bound ligands that expose the surface to the aqueous environment.

Design principles of chiral carbon nanodots help convey chirality from molecular to nanoscale level.

The chirality of (nano)structures is paramount in many phenomena, including biological processes, self-assembly, enantioselective reactions, and light or electron spin polarization. In the quest for new chiral materials, metallo-organic hybrids have been attractive candidates for exploiting the aforementioned scientific fields. Here, we show that chiral carbon nanoparticles, called carbon nanodots, can be readily prepared using hydrothermal microwave-assisted synthesis and easily purified. These particles, with a mean particle size around 3 nm, are highly soluble in water and display mirror-image profile both in the UV-Vis and in the infrared regions, as detected by electronic and vibrational circular dichroism, respectively. Finally, the nanoparticles are used as templates for the formation of chiral supramolecular porphyrin assemblies, showing that it is possible to use and transfer the chiral information. This simple (and effective) methodology opens up exciting opportunities for developing a variety of chiral composite materials and applications.

Customizing the Electrochemical Properties of Carbon Nanodots by Using Quinones in Bottom-Up Synthesis.

We show how the redox potentials of carbon nanodots (CNDs) can be modulated by employing quinones as electroactive precursors during a microwave-assisted synthesis. We prepared and characterized a redox library of CNDs, demonstrating that this approach can promote the use of carbon nanodots for ad hoc applications, including photocatalysis.

Nitrogen-doped carbon nanodots for bioimaging and delivery of paclitaxel.

Carbon nanodots (CNDs) hold great potential in imaging and drug delivery applications. In this study, nitrogen-doped CNDs (NCNDs) were coupled to the anticancer agent paclitaxel (PTX) through a labile ester bond. NCNDs showed excellent cell viability and endowed the NCND-PTX conjugate with good water solubility. The hybrid integrates the optical properties of the nanodots with the anticancer function of the drug into a single unit. Cytotoxicity was evaluated in breast, cervix, lung, and prostate cancer cell lines by the MTT assay while the cellular uptake was monitored using confocal microscopy. NCND-PTX induced apoptosis in cancer cells exhibiting slightly better anticancer activity compared to the drug alone. Moreover, the course of the NCND-PTX interaction with cancer cells was monitored using an xCELLigence system. The NCND-based conjugate represents a promising platform for bioimaging and drug delivery.

Screening Supramolecular Interactions between Carbon Nanodots and Porphyrins.

We present an in-depth investigation regarding the electron-accepting nature of pressure-synthesized carbon nanodots (pCNDs) in combination with porphyrins as excited-state electron donors. To this end, electrostatic attractions involving negative charges, which are present on the pCND surface, are essential to govern the hybrid assembly, on one hand, and charge separation, on the other hand.

Nitrogen-Doped Carbon Nanodots-Ionogels: Preparation, Characterization, and Radical Scavenging Activity.

Hybrid diimidazolium-based ionogels were obtained by dispersing nitrogen-doped carbon nanodots (NCNDs) in ionic liquid (IL) solutions and by using dicationic organic salts as gelators. The properties of the NCND-ionogels were studied in terms of thermal stability, mechanical strength, morphology, rheological, and microscopic analyses. Insights into the formation of the hybrid soft material were attained from kinetics of sol-gel phase transition and from estimating the size of the aggregates, obtained from opacity and resonance light-scattering measurements. We demonstrate that, on one hand, NCNDs were able to favor the gel formation both in the presence of gelating and nongelating ILs. On the other hand, the gelatinous matrix retains and, in some cases, improves the properties of NCNDs. The NCND-ionogels showed the typical fluorescence emission of the carbon dots and a notable antiradical activity, with higher efficiency as compared to the single components. The presented hybrid materials hold great promise for topical applications in antioxidant fields.