The effectiveness of an integrated BIM/UAV model in managing safety on construction sites.

Introduction. A variety of approaches exist to achieve better construction safety performance, but only a few consider a combination of building information modeling (BIM) and unmanned aerial vehicles (UAVs). Method. This article presents a four-dimensional (4D) BIM/UAV-enabled safety management model based on IDEF0 language. In the first step, potential hazards are identified with the help of safety specialists' experiences and BIM software used in the design of the structure. Then, a UAV monitors the location of the potential hazards. The third step involves the integration of the 4D BIM-based model and the information obtained from the UAV. Finally, the combined data are analyzed and interpreted, and site safety staff are notified about measures to be put in place to prevent accidents. Results. This model shows a strong relationship between the design and construction phases by using BIM in the design phase and UAVs in the construction phase. The proposed safety model was evaluated by construction safety specialists in a two-pronged approach. Conclusion. The number of fatal, non-fatal and property damage-causing accidents may be significantly lower when the proposed system was used. Practical application. This model allows safety specialists to identify hazards and develop suitable mitigation strategies.

Fatal accidents in nighttime vs. daytime highway construction work zones.

INTRODUCTION: Awareness about worker safety in nighttime construction has been a major concern because it is believed that nighttime construction creates hazardous work conditions. However, only a few studies provide valuable comparative information about accident characteristics of nighttime and daytime highway construction activities. METHOD: This study investigates fatal accidents that occurred in Illinois highway work zones in the period 1996-2001 in order to determine the safety differences between nighttime and daytime highway construction. The lighting and weather conditions were included into the study as control parameters to see their effects on the frequency of fatal accidents occurring in work zones. RESULTS: According to this study, there is evidence that nighttime construction is more hazardous than daytime construction. The inclusion of a weather parameter into the analysis has limited effect on this finding. IMPACT ON INDUSTRY: The study justifies establishing an efficient work zone accident reporting system and taking all necessary measures to enhance safety in nighttime work zones.