Coordination, reactivity, and structural properties of electron-rich ethoxy- and dimethylamino-substituted 1,3-diketiminate ligands and their complexes.

In this paper we describe the synthesis, characterization, and X-ray crystal structures of two ligands, diethyl-N,N'-bis(p-tolyl)malonimidate and 1,3-bis(dimethylamino)-N,N'-bis(p-tolyl)propanediimidate. Their corresponding rhodium(i) dicarbonyl, dimethylaluminium, and bis-ligated zinc complexes have also been prepared and characterized. The donor properties of the ligands have been studied and have been compared to those of the traditional anionic N,N'-chelating ligand nacnac.

Towards Redox-Driven Unidirectional Molecular Motion.

Redox-driven molecular motion is an attractive alternative to light-driven processes. Here, the ability of an overcrowded alkene-based unimolecular light-driven rotary motor (A) to be driven by oxidation/reduction cycles is explored. We show that two-electron oxidation of A is followed by irreversible deprotonation and reduction to form a monocationic species D(+) , in which the stereogenic center is lost. This latter species was isolated through preparative electrolysis and its structure was confirmed by using single-crystal X-ray analysis. However, at short timescales and in the absence of Brønsted acids, these processes can be outrun and the oxidation of A to a dicationic species B(2+) occurs, in which the central double bond (the axle of the molecular motor) becomes a single bond; when followed by rapid reduction, it results in the reformation of A, potentially in both its stable and unstable conformations. The latter conformation, if formed, undergoes thermal helix inversion, completing a rotary cycle. The data obtained regarding these reactions provide a window of opportunity for the motor to be driven electrochemically, without degradation from chemical reactions of the oxidized motor.

Light-controlled formation of vesicles and supramolecular organogels by a cholesterol-bearing amphiphilic molecular switch.

A new responsive material composed of an amphiphilic light-switchable dithienylethene unit functionalized with a hydrophobic cholesterol unit and a hydrophilic poly(ethylene glycol)-modified pyridinium group has been designed. This unique single-molecule system shows responsive light-switchable self-assembly in both water and organic solvents. Light-triggered reversible vesicle formation in aqueous solutions is reported. The molecule shows a different behavior in apolar aromatic solvents, in which light-controlled formation of organogel fibers is observed. The light-triggered aggregation behavior of this molecule demonstrates that control of a supramolecular structure with light can be achieved in both aqueous and organic media and that this ability can be present in a single molecule. This opens the way toward the effective development of new strategies in soft nanotechnology for applications in controlled chemical release systems.

Self-organizing surface-initiated polymerization, templated self-sorting and templated stack exchange: synthetic methods to build complex systems.

In nature, spectacular function is achieved by highly sophisticated supramolecular architectures. Little is known what we would obtain if we could create complexity with similar precision, because the synthetic methods to do so are not available. This account summarizes recent approaches conceived to improve on this situation. With self-organizing surface-initiated polymerization (SOSIP), charge-transporting stacks can be grown directly on solid substrates with molecular-level precision. The extension to templated self-sorting (SOSIP-TSS) offers a supramolecular approach to multicomponent architectures. A solid theoretical framework for the transcription of information by templated self-sorting has been introduced, intrinsic templation efficiencies up to 97% have been achieved, and the existence of self-repair has been shown. The extension to templated stack exchange (SOSIP-TSE) offers the complementary covalent approach. Compatibility of this robust method with the creation of double-channel architectures with antiparallel two-component gradients has been demonstrated.

Directional stack exchange along oriented oligothiophene stacks.

Directional growth of π-basic oligothiophene stacks on solid substrates is achieved by self-organizing, surface-initiated disulfide exchange polymerization. Successful addition of co-axial π-acidic stacks by templated hydrazone exchange provides general access to multicomponent architectures of unique complexity.

Engineering antiparallel charge-transfer cascades into supramolecular n/p-heterojunction photosystems: toward directional self-sorting on surfaces.

This contribution describes recent progress made with the design, synthesis and evaluation of supramolecular architectures for artificial photosynthesis. Emphasis is on the possible introduction of antiparallel redox gradients into the co-axial hole- and electron-transporting channels of supramolecular n/p-heterojunctions, and on directional, uniform axial and alternate lateral self-sorting to get there. Recent results suggest that two-component gradients in both channels are sufficient for photoinduced charge separation over very long distances. Removal of one gradient leads to charge recombination at the usual critical distances, inversion of both gradients causes photocurrent inhibition. These promising results call for user-friendly, cheap and fast approaches to oriented multicomponent architectures on solid surfaces. However, the reduction of efforts devoted to covalent organic synthesis will have to be compensated by the development of strategic concepts on the supramolecular level to tackle basic questions such as self-sorting on surfaces.

A chiroptical photoswitchable DNA complex.

The interesting structural, electronic, and optical properties of DNA provide fascinating opportunities for developing nanoscale smart materials by integrating DNA with opto-electronic components. In this article we demonstrate the electrostatic binding of an amine-terminated dithienylethene (DET) molecular switch to double-stranded synthetic polynucleotides. The DET switch can undergo photochemical ring-closure and opening reactions. Circular dichroism (CD) and UV-vis spectroscopy show that both the open, 1o, and the closed, 1c, forms of the switch bind to DNA. Upon addition of DNA to a solution of 1o or 1c, the UV-vis spectrum displays a hypochromic effect, indicative of an interaction between the switch and the DNA. The chirality of the DNA double-helix is transmitted to the switching unit which displays a well-defined CD signal upon supramolecular complexation to the DNA. Additionally, the CD signal of the DNA attenuates, demonstrating that both components of the complex mutually influence each other's structure; the DNA induces chirality in the switch, and the switch modifies the structure of the DNA. Modulation of the chiroptical properties of the complex is achieved by photochemically switching the DET between its ring open and closed isomers. A pH dependence study of the binding shows that when the pH is increased the switches lose their binding ability, indicating that electrostatic interactions between protonated amines and the negatively charged phosphate backbone are the dominant driving force for binding to the DNA. A comparison of poly(deoxyguanylic-deoxycytidylic) acid [poly(dGdC)(2)] polynucleotides with poly(deoxyadenylic-deoxythymidylic) acid [poly(dAdT)(2)] shows distinct differences in the CD spectra of the complexes.

Lateral self-sorting on surfaces: a practical approach to double-channel photosystems.

We report that self-sorting during self-organizing surface-initiated copolymerization (co-SOSIP) provides facile access to oriented multicomponent architectures. Alternate lateral and uniform axial self-sorting into formal supramolecular n/p-heterojunction photosystems is found to generate up to 40 times more photocurrent. More or less topological matching gives rise to alternate axial self-sorting into inactive charge-transfer complexes or uniform lateral sorting into the less active macrodomains, respectively. Experimental support for self-repair during co-SOSIP is reported. Initiators on the surface are shown to serve as templates for the self-sorting into multichannel architectures of freely variable composition.

Recent progress with functional biosupramolecular systems.

The objective of this account is to summarize our recent progress with functional biosupramolecular systems concisely. The functions covered are artificial photosynthesis, anion transport, and sensing in lipid bilayer membranes. With artificial photosynthesis, the current emphasis is on the construction of ordered and oriented architectures on solid surfaces. Recent examples include the zipper assembly of photosystems with supramolecular n/p-heterojunctions and oriented antiparallel redox gradients. Current transport systems in lipid bilayers reveal new interactions at work. Examples include anion-macrodipole or anion-π interactions. Current attention with membrane-based sensing systems shifts from biosensor approaches with enzymatic signal generation to aptamers (i.e., the DNA version of immunosensing) and differential sensing with dynamic polyion-counterion transporters. The functional diversity accessible with biosupramolecular systems is highlighted, as is the critical importance of cross-fertilization at intertopical convergence zones.

Electrochemical and photochemical cyclization and cycloreversion of diarylethenes and diarylethene-capped sexithiophene wires.

A combined theoretical and experimental study was performed on diarylethenes and diarylethene-capped sexithiophenes aiming at an improved understanding of the electrochemical and photochemical ring-opening and ring-closing mechanisms. Theoretical calculations, based on DFT and TDDFT, suggested that the spatial distribution and the occupancy of the frontier orbitals determine and control the diarylethenes' ring-opening and ring-closing upon photoirradiation and electrochemical oxidation. Optimized geometries, potential energy surfaces, and activation energies between the open-ring and closed-ring forms were calculated for diarylethenes in the neutral ground state, excited states, and mono- and dicationic states. Analysis of the frontier orbitals was employed to understand the cyclization and cycloreversion of diarylethenes and to predict and explain the switching properties of diarylethene-capped sexithiophene molecular wires. The TDDFT data were verified with experimentally measured UV/vis spectra. The DFT calculations estimated open-shell ground states of diarylethene-capped sexithiophene dications, which were verified with EPR spectroscopy, and the broadening of the peaks in the EPR spectra were explained with the calculated singlet-triplet splitting. The good agreement of experiment and theory allows for the understanding of switching behavior of diarylethenes in solutions, in metal break junctions, in monolayers on metal surfaces, and as a part of complex organic molecular wires.

Symmetric six-fold arrays of photo- and electrochromic dithienylethene switches.

The direct synthesis of six-fold symmetric hexaphenylbenzenes with multiple photochromic dithienylethene units via a cobalt-catalyzed cyclotrimerization is reported. This approach allows for six photochromic units to be held in proximity with a well-defined spatial separation without affecting the photochromic properties of each unit.

Tunable aggregation and luminescence of bis(diarylethene)sexithiophenes.

Diarylethenes with two different side groups (phenyl and chloro) were appended to both alpha-ends of a sexithiophene unit. The temperature dependent aggregation properties for both compounds were characterized by steady state and transient absorption spectroscopy. The peripheral side groups show an unexpectedly significant influence on the electronic properties of the sexithiophene core. Furthermore, the relative influence of the phenyl and chloro substituents on the aggregation behavior observed is remarkable. The phenyl compound exhibits formation of H-aggregates over a narrow temperature range, between 240 and 200 K, typical of strong intermolecular interactions. In contrast, the chloro compound shows gradual aggregation over a wide temperature range, forming H-aggregates albeit with weaker intermolecular interactions. The results demonstrate that minor changes in the structure lead to tunability of the aggregation and corresponding luminescence properties of sexithiophenes in solution and hold particular relevance to supramolecular and polymer systems based on sexithiophene units.

Photoswitchable sexithiophene-based molecular wires.

Photochromic sexithiophenes were prepared by oxidative electrochemical coupling of terthiophenes. The redox properties in the open state are typical of sexithiophenes. Ring closure of both photochromic units leads to a decrease in the energy of the LUMO orbitals with little affect on the energy of the HOMO orbitals. The photochemical tuning of the conjugation of a molecular wire is achieved by combining dithienylethene units with a sexithiophene.

On/off photoswitching of the electropolymerizability of terthiophenes.

In this contribution the polymerization of terthiophene, to form an alkene bridged alpha,alpha-coupled sexithiophene polymer, is controlled by light; i.e. the electropolymerizability of the monomer 1F is switched off and on with UV and visible light, respectively. The system comprises of both bis-terthiophene and photochromic dithienylethene units. The presence of a light-switchable unit allows on-off switching of the electropolymerization of the monomer with light. Furthermore the incorporation of the dithienylethene in the polymer backbone increases dramatically the homogenity of the polymer formed (i.e., only sexithiophene units are formed). The derived films are robust and fully retain electrochromic behavior as has been demonstrated through cyclic voltammetry while spatial control (patterning) is readily achieved by applying simple optical masking techniques.

Photochromism and electrochemistry of a dithienylcyclopentene electroactive polymer.

A bifunctional substituted dithienylcyclopentene photochromic switch bearing electropolymerisable methoxystyryl units, which enable immobilization of the photochromic unit on conducting substrates, is reported. The spectroscopic, electrochemical, and photochemical properties of a monomer in solution are compared with those of the polymer formed through oxidative electropolymerization. The electroactive polymer films prepared on gold, platinum, glassy carbon, and indium titanium oxide (ITO) electrodes were characterized by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The thickness of the films formed is found to be limited to several monolayer equivalents. The photochromic properties and stability of the polymer films have been investigated by UV/vis spectroscopy, electrochemistry, and XPS. Although the films are electrochemically and photochemically stable, their mechanical stability with respect to adhesion to the electrode was found to be sensitive to both the solvent and the electrode material employed, with more apolar solvents, glassy carbon, and ITO electrodes providing good adhesion of the polymer film. The polymer film is formed consistently as a thin film and can be switched both optically and electrochemically between the open and closed state of the photochromic dithienylethene moiety.

Photoresponsive rolling and bending of thin crystals of chiral diarylethenes.

Dithienylhexafluorocyclopentene with (R)- or (S)-N-phenylethylamide substituents formed rod-like and 0.2-1.0 microm-thick platelike crystals by sublimation; upon UV irradiation, the crystals bent concavely to the incident light and finally rolled crystals were obtained; the bent crystals were reconverted to flat crystals by visible light irradiation.

Photoresponsive dithienylethene-urea-based organogels with "reversed" behavior.

Dithienylperhydrocyclopentene-bisurea-based low molecular weight gelators are described that function as photoresponsive organogels that show a remarkable gel-to-liquid transition upon irradiation. The two series of derivatives, with and without alkyl spacers between the urea hydrogen bonding groups and the photochromic unit, show different gelation behavior. Upon UV irradiation of the gels, a gel liquified at only 1.4% conversion of the photochromic unit. Transmission electron microscopy (TEM) shows that the gel fibres consist of thin ribbons. Semi-empirical (PM3) calculations indicate that the hydrogen bonding between the open-ring isomer (o) molecules is weak, and that formation of the closed-ring isomer (c) destabilises the hydrogen bonding further. The results indicate that a small amount of the closed-ring isomer will disrupt the intermolecular hydrogen-bonding, leading to disintegration of the gel fibre ribbons and hence reversible liquification.

Three-state photochromic switching in a silyl bridged diarylethene dimer.

The synthesis and photochemical characterization of bicomponent molecular switches based on covalently tethered dithienylethene photochromes is described. Both photochromic units undergo complete switching between the fully cyclised and fully non-cyclised states despite a significant level of electronic communication between the individual units and their proximity.

Photo- and electro-chromism of diarylethene modified ITO electrodes-towards molecular based read-write-erase information storage.

Molecular memory devices based on dithienylethene switch modified ITO electrodes undergo reversible ring opening/closing both photo- and electro-chemically with non-destructive electrochemical readout.