A solid colorimetric sensor for the analysis of amphetamine-like street samples.

A solid sensor obtained by embedding 1,2-naphthoquinone-4-sulfonate (NQS) into polydimethylsiloxane/tetraethylortosilicate/silicon dioxide nanoparticles composite has been developed to identify and determine amphetamine (AMP), methamphetamine (MAMP), 3,4-methylenedioxymetamphetamine (MDMA) and 3,4-methylenedioxyamphetamine (MDA). The analytes are derivatized inside the composite for 10 min to create a colored product which can be then quantified by measuring the diffuse reflectance or the color intensity after processing the digitalized image. Satisfactory limits of detection (0.002-0.005 g mL-1) and relative standard deviations (<10%) have been achieved. The proposed kit has been successfully validated and applied to the analysis of amphetamine-like drugs street samples. The kit allows the in-situ screening of the mentioned illicit drugs owing to its simplicity, rapidity and portability, with excellent sensor stability and at a very low-cost.

Determination of amphetamines in hair by integrating sample disruption, clean-up and solid phase derivatization.

The utility of matrix solid phase dispersion (MSPD) for the direct analysis of amphetamines in hair samples has been evaluated, using liquid chromatography (LC) with fluorescence detection and precolumn derivatization. The proposed approach is based on the employment of MSPD for matrix disruption and clean-up, followed by the derivatization of the analytes onto the dispersant-sample blend. The fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC) has been used for derivatization. Different conditions for MSPD, analyte purification and solid phase derivatization have been tested, using amphetamine (AMP), methamphetamine (MET), ephedrine (EPE) and 3,4-methylenedioxymethamphetamine (MDMA) as model compounds. The results have been compared with those achieved by using ultrasound-assisted alkaline digestion and by MSPD combined with conventional solution derivatization. On the basis of the results obtained, a methodology is proposed for the analysis of amphetamines in hair which integrates sample disruption, clean-up and derivatization using a C18 phase. Improved sensitivity is achieved with respect to that obtained by the alkaline digestion or by the MSPD followed by solution derivatization methods. The method can be used for the quantification of the tested amphetamines within the 2.0-20.0ng/mg concentration interval, with limits of detection (LODs) of 0.25-0.75ng/mg. The methodology is very simple and rapid (the preparation of the sample takes less than 15min).

A capillary liquid chromatography method for benzalkonium chloride determination as a component or contaminant in mixtures of biocides.

A method for quantifying benzalkonium chloride (BAK), an alkyl dimethyl benzyl ammonium compound, in several biocides formulations is proposed. A tertiary amine like N-(3-aminopropyl)-N-dodecyl-1,3-propanediamine (TA) and a straight-chain alkyl ammonium compound like trimethyl-tetradecyl ammonium chloride (TMTDAC), have been employed as trade surfactants besides BAK. Two capillary analytical columns with different polarities are tested: inertsil CN-3 capillary column (150mm×0.5mm i.d., 3µm particle diameter) and a non endcapped Zorbax C18 capillary column (35mm×0.5mm i.d., 5µm particle diameter). This latter column provided the best separation of the BAK homologues in less than 12min using acetonitrile:acetate buffer (50mM, pH 5) 85:15 at 20µLmin(-1). The proposed method combines on-line in-tube solid-phase microextraction (IT-SPME) coupled to capillary liquid chromatography (CapLC) and UV diode array detection. Matrix effect was present when TA were in excess to BAK. If TMTDAC is the co-biocide, matrix effect is always present. A decreasing of analytical response mainly for C12-BAK homologue was found using both chromatographic columns. The charged amount of mixture in the system was the most important parameter for obtaining reliable results. 1mL was the on line processed sample volume optimum for concentrations lower than 35µgmL(-1) of total surfactants. LODs were 0.03µgmL(-1) and 0.006µgmL(-1) for C12-BAK and C14-BAK, respectively. This method is also of use to evaluate the unwanted presence of BAK in biocide formulations due to industrial processes.

A solid device based on doped hybrid composites for controlling the dosage of the biocide N-(3-aminopropyl)-N-dodecyl-1,3-propanediamine in industrial formulations.

A colorimetric composite device is proposed to determine the widely used biocide N-(3-aminopropyl)-N-dodecyl-1,3-propanediamine (ADP).This sensing device is based on a film of 1,2-Naphthoquinone-4-sulfonate (NQS) embedded into polydimethylsiloxane-tetraethylortosilicate-SiO2 nanoparticles composite (PDMS-TEOS-SiO2NPs). Semiquantitative analysis can be performed by visual inspection. Digitalized image or diffuse reflectance (DR) measurements can be carried out for quantitative analysis. Satisfactory detection limit (0.018%, w/v) and relative standard deviations <12% were achieved. The proposed device has been applied for the determination of ADP in detergent industrial formulations with recovery values between 80% and 112%. The method has been successfully validated, showing its high potential to control and monitor this compound because the device is easy to prepare and use, robust, portable, stable over time and cost effective. This device allows a green, simple and rapid approach for the analysis of samples without pretreatment and does not require highly trained personnel. These advantages give the proposed kit good prospects for implementation in several industries.

Polydimethylsiloxane composites containing 1,2-naphtoquinone 4-sulphonate as unique dispositive for estimation of casein in effluents from dairy industries.

A unique dispositive to determine casein which is the most abundant protein in dairy sewages has been proposed. In this sensing technology, the derivatization reagent 1,2-naphtoquininone 4-sulphonate (NQS) is embedded into a polydimethylsiloxane-tetraethylortosilicate-SiO2 nanoparticles composite (PDMS-TEOS-SiO2NPs). When the composite is immersed into the samples, casein is extracted from the solution and derivatized inside the PDMS matrix after 10 min at 100°C. The sensing support changes its color from yellow to orange depending on the casein concentration. Quantitative analysis can be carried out by measuring the absorbance with a reflection probe or by image-processing tool (GIMP). This sensor provides good sensitivity and precision (RSD% <12%). The method validation has been done by applying the biocinchoninic acid method (BCA). Moreover, semiquatitative analysis of casein can be performed by visual observation. Taking into account the advantages of small size, rapidity, simplicity, good stability and high compatibility in aqueous solution, this sensor is expected to have potential practical applications for in-situ determination of casein. Finally the method has been applied to analyze effluents from dairy industries.

A cost-effective method for estimating di(2-ethylhexyl)phthalate in coastal sediments.

This study describes the development of a new method for the analysis of di(2-ethylhexyl)phthalate (DEHP) using 0.1-0.3 g of sediment sample, based on matrix solid phase dispersion (MSPD) using C18 as dispersant phase (0.4 g) and acetonitrile-water as eluting solvent (3.4 mL 1:3.25, v/v). No evaporation step is required. 3 mL of extracts were processed on-line by in-tube solid phase microextraction (IT-SPME) coupled to capillary liquid chromatography (CapLC) and diode array detector (DAD). A short analytical column Zorbax SB C18 (35×0.5 mm, 5 µm) provided suitable results. FTIR-ATR was employed for characterizing sediment samples and MSPD procedure. The total analysis time was less than 20 min (MSPD takes about 10 min). The utility of the described approach has been tested by analyzing several real samples. No matrix effect was found. Achieved precision was less than 10% for DEHP estimation. Detection limits in samples were 270 and 90 µg/kg for 0.1 and 0.3 g of taken sediment, respectively.