Elastomeric microwell-based triboelectric nanogenerators by in situ simultaneous transfer-printing.

Self-powered tactile module-based electronic skins incorporating triboelectric nanogenerator (TENG) appears to be a worthwhile alternative for smart monitoring devices in terms of sustainable energy harvesting. On top of it, ultra-stretchability and detection sensitivity are imperative to mimic human skin. We report, for the first time, a metal-free single electrode TENG-based self-powered tactile module comprising of microwells (diameters 2 µm and 200 nm, respectively) on fluoroelastomer (FKM) and laser induced graphene (LIG) electrodes by in situ simultaneous transfer printing method. Direct imprinting of both the active surface and LIG electrode on a tribonegative FKM has not been attempted before. The resulting triboelectric module exhibits impressive maximum power density of 715 mW m-2, open circuit voltage and maximum output current of 148 V and 9.6 µA respectively for a matching load of 10 MΩ. Moreover, the TENG unit is very robust and sustained high electrical output even at 200% elongation. A dielectric-to-dielectric TENG-based tactile sensor is also constructed using FKM (negative tribolayer) and TiO2 deposited micropatterned PDMS. Resulting tribo-sensor demonstrates remarkable motion and force sensitivity. It can also distinguish subtle human contact force that can simulate skin with high sensitivity and therefore, can be utilized for potential e-skin/bionic skin applications in health and human-machine interfaces.

Designing Supertough and Ultrastretchable Liquid Metal-Embedded Natural Rubber Composites for Soft-Matter Engineering.

Functional elastomers with incredible toughness and stretchability are indispensable for applications in soft robotics and wearable electronics. Furthermore, coupled with excellent electrical and thermal properties, these materials are at the forefront of recent efforts toward widespread use in cutting-edge electronics and devices. Herein, we introduce a highly deformable eutectic-GaIn liquid metal alloy-embedded natural rubber (NR) architecture employing, for the first time, industrially viable solid-state mixing and vulcanization. Standard methods of rubber processing and vulcanization allow us to fragment and disperse liquid metals into submicron-sized droplets in cross-linked NR without compromising the elastic properties of the base matrix. In addition to substantial boosts in mechanical (strain at failure of up to ∼650%) and elastic (negligible hysteresis loss) performances, the tearing energy of the composite was enhanced up to 6 times, and a fourfold reduction in the crack growth rate was achieved over a control vulcanizate. Moreover, we demonstrate improved thermal conductivity and dielectric properties for the resulting composites. Therefore, this work provides a facile and scalable pathway to develop liquid metal-embedded soft elastomeric composites that could be instrumental toward potential applications in soft-matter engineering.

Effect of Prestrain on the Actuation Characteristics of Dielectric Elastomers.

Dielectric elastomers (DEs) represent a class of electroactive polymers that deform due to electrostatic attraction between oppositely charged electrodes under a varying electric field. Over the last couple of decades, DEs have garnered considerable attention due to their much-coveted actuation properties. As far as the precise measurement systems are concerned, however, there is no standard instrument or interface to quantify various related parameters, e.g., actuation stress, strain, voltage and creeping etc. In this communication, we present an in-depth study of dielectric actuation behavior of dielectric rubbers by the state-of-the-art "Dresden Smart Rubber Analyzer" (DSRA), designed and developed in-house. The instrument allowed us to elucidate various factors that could influence the output efficiency of the DEs. Herein, several non-conventional DEs such as hydrogenated nitrile rubber, nitrile rubber with different acrylonitrile contents, were employed as an electro-active matrix. The effect of viscoelastic creeping on the prestrain, molecular architecture of the matrices, e.g., nitrile content of nitrile-butadiene rubber (NBR) etc., are also discussed in detail.

FeCo-Anchored Reduced Graphene Oxide Framework-Based Soft Composites Containing Carbon Nanotubes as Highly Efficient Microwave Absorbers with Excellent Heat Dissipation Ability.

Conducting polymer composites containing ferromagnetic grafted-graphene derivatives are already appreciated for their lightweight, flexibility, and cost effectiveness in terms of microwave absorption. To further leverage the said properties of this wonder material, we propose a highly efficient replacement by blending conducting multiwall carbon nanotube (MWCNT) and FeCo anchored covalent cross-linked reduced graphene oxide (rGO) with poly(vinylidene fluoride) (PVDF). Interconnected conducting network of MWCNTs introduces higher electrical conductivity in the blend which is essential for microwave absorption. FeCo-anchored porous interconnected rGO framework was designed via solvent-mediated in situ coreduction in the presence of Fe(II) and Co(II) precursors. Resulting cross-linked-rGO/FeCo displays fascinating coexistence of ferromagnetism and conducting-dielectric behavior, while largely preserving the robust 3D porous interconnected structure. Coupled with conducting MWCNTs, diamine cross-linked rGO/FeCo in a soft polymer matrix yields remarkably high total shielding effectiveness (SET) of -41.2 dB at 12 GHz, for a meager 10 wt % filler content. In addition, the composite materials display efficient heat dissipation abilities in conjunction with the trend in their thermal conductivities. This new-age microwave-absorbing material, powered by multifunctionality and tunable magnetodielectric properties, henceforth offers an amendable, cost-effective replacement to the existing solutions.

Absorption-Dominated Electromagnetic Wave Suppressor Derived from Ferrite-Doped Cross-Linked Graphene Framework and Conducting Carbon.

To minimize electromagnetic (EM) pollution, two key parameters, namely, intrinsic wave impedance matching and intense absorption of incoming EM radiation, must satisfy the utmost requirements. To target these requirements, soft conducting composites consisting of binary blends of polycarbonate (PC) and poly(vinylidene fluoride) (PVDF) were designed with doped multiwalled carbon nanotubes (MWCNTs) and a three-dimensional cross-linked graphene oxide (GO) framework doped with ferrite nanoparticles. The doping of α-MnO2 onto the MWCNTs ensured intrinsic wave impedance matching in addition to providing conducting pathways, and the ferrite-doped cross-linked GO facilitated the enhanced attenuation of the incoming EM radiation. This unique combination of magnetodielectric coupling led to a very high electromagnetic shielding efficiency (SE) of -37 dB at 18 GHz, dominated by absorption-driven shielding. The promising results from the composites further motivated us to rationally stack individual composites into a multilayer architecture following an absorption-multiple reflection-absorption pathway. This resulted in an impressive SE of -57 dB for a thin shield of 0.9-mm thickness. Such a high SE indicates >99.999% attenuation of the incoming EM radiation, which, together with the improvement in structural properties, validates the potential of these materials in terms of applications in cost-effective and tunable solutions.

Tuning the Shape Anisotropy and Electromagnetic Screening Ability of Ultrahigh Magnetic Polymer and Surfactant-Capped FeCo Nanorods and Nanocubes in Soft Conducting Composites.

Herein, we demonstrate that very high electromagnetic (EM) shielding efficiency can be achieved by dispersing nanoengineered FeCo anisometric nanostructures in a poly(vinylidene difluoride) matrix in the presence of conductive nanofillers (multiwall carbon nanotubes, MWCNTs). The FeCo nanorods (∼800 nm) and nanocubes (∼100 nm) were fabricated by a facile surfactant and polymer-assisted one-pot borohydride reduction method. The growth mechanism depicted a two-directional growth for cubes, whereas for nanorods, a unidirectional growth pattern across the (110) plane was evident. A total shielding effectiveness (SET) of -44 dB at 18 GHz was achieved for a particular combination of FeCo nanorods and MWCNT, and for nanocube-based composites, it was found to be -39 dB at 18 GHz. It was observed from zero field cooled-field cooled curves that the samples displayed room temperature ferromagnetism. An excellent correlation between high aspect ratio FeCo nanorod and superior EM absorption (89%) was explored, pertaining to the fact that nanorods possessed higher magnetic saturation (177.1 emu/g) and coercivity (550 Oe) in contrast to the nanocubes with similar composition. Furthermore, theoretical insight into the mechanism revealed a high degree of interface scattering between conductive MWCNT and magnetic loss components, giving rise to an excellent synergy between magnetic and dielectric parts.