RESUMO
For the first time, we present a much-needed technology for the in situ and real-time detection of nanoplastics in aquatic systems. We show an artificial intelligence-assisted nanodigital in-line holographic microscopy (AI-assisted nano-DIHM) that automatically classifies nano- and microplastics simultaneously from nonplastic particles within milliseconds in stationary and dynamic natural waters, without sample preparation. AI-assisted nano-DIHM identifies 2 and 1% of waterborne particles as nano/microplastics in Lake Ontario and the Saint Lawrence River, respectively. Nano-DIHM provides physicochemical properties of single particles or clusters of nano/microplastics, including size, shape, optical phase, perimeter, surface area, roughness, and edge gradient. It distinguishes nano/microplastics from mixtures of organics, inorganics, biological particles, and coated heterogeneous clusters. This technology allows 4D tracking and 3D structural and spatial study of waterborne nano/microplastics. Independent transmission electron microscopy, mass spectrometry, and nanoparticle tracking analysis validates nano-DIHM data. Complementary modeling demonstrates nano- and microplastics have significantly distinct distribution patterns in water, which affect their transport and fate, rendering nano-DIHM a powerful tool for accurate nano/microplastic life-cycle analysis and hotspot remediation.
Assuntos
Inteligência Artificial , Microplásticos , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Monitoramento Ambiental/métodos , Água/químicaRESUMO
Little is known about the role of starchy food on climate change processes like ice nucleation. Here, we investigate the ice nucleation efficiency (INE) of eight different starchy food materials, namely, corn (CO), potato (PO), barley (BA), brown rice (BR), white rice (WR), oats (OA), wheat (WH), and sweet potato (SP), in immersion freezing mode under mixed-phase cloud conditions. Notably, among all these food materials, PO and BA exhibit the highest ice nucleation efficiency with ice nucleation temperatures as high as -4.3 °C (T50 â¼ -7.0 ± 0.5 °C) and -6.5 °C (T50 â¼ -7.2 ± 0.2 °C), respectively. We also explore the effect of environmentally relevant physicochemical conditions on ice nucleation efficiency, including different pH, temperature, UV/O3/NOx exposure, and various cocontaminants. The change in shape, size, surface properties, hydrophobicity, and crystallinity of materials accounted for the altered INE. The increase in shape, size, and hydrophobicity of the sample generally reduces the INE, whereas an increase in crystallinity enhances the INE of the sample under our experimental conditions. The results suggest that environmentally relevant concentrations slightly alter INE, indicating their role as catalysts in environmental matrices. The outcome of studies on the ice nucleation properties of these food-containing aerosols might help in the physicochemical understanding of other biomolecule-induced ice nucleation, which is still an underdeveloped research area.
RESUMO
A novel nano-digital inline holographic microscope (nano-DIHM) was used to advance in-situ and real-time nano/microplastic physicochemical research, such as particle coatings and dynamic processes in water. Nano-DIHM data provided evidence of distinct coating patterns on nano/microplastic particles by oleic acid, magnetite, and phytoplankton, representing organic, inorganic, and biological coatings widely present in the natural surroundings. A high-resolution scanning transmission electron microscopy confirmed nano-DIHM data, demonstrating its nano/microplastic research capabilities. The sedimentation of two plastic size categories was examined: (a) â¼10 to 700 µm, and (b) â¼ 1 to 5 mm. Particle size was the primary factor affecting the sedimentation for studied (a) microplastics and (b) pellets. Two types of silicone rubbers exhibited different sedimentation processes. We also demonstrated that inorganic ions in seawater and oleic acid organic coatings altered the sedimentation velocity of studied plastics by 9 - 13% and 5 - 9%, respectively. Semi-empirical probability functions were developed and incorporated into a numerical model (CaMPSim-3D) to simulate the transport of studied microplastics and pellets in the Saint John River estuary. Water dynamics was the driving force of plastic transport, yet the accumulation of plastics was selectively dependant on particle physicochemical properties such as size and density by â¼ 7%. The usage of nano-DIHM for targeted identification of nano/microplastic hotspots and aquatic plastic wastes remediation were discussed.
Assuntos
Plásticos , Poluentes Químicos da Água , Microplásticos , Água , Ácido Oleico , Poluentes Químicos da Água/química , Monitoramento AmbientalRESUMO
Mineral dust aerosols play an important role in tropospheric chemistry and aerosol-cloud interaction processes. Yet, their interactions with gaseous elemental mercury (Hg0(g)) are not currently well understood. Using a coated-wall flow tube (CWFT) reactor, we measured the uptake of Hg0(g) on some common components of mineral dust aerosols, including TiO2, Al2O3, and Fe2O3, and the effects of irradiation (dark, visible and UV-A) and relative humidity (<2% to 60%) on the uptake kinetics. Under UV-A irradiation (320-400 nm) in dry air, we measured uptake coefficients (γ) equal to >1 × 10-3 and (3 ± 1) × 10-6 on TiO2 and Al2O3, respectively. Under visible light irradiation (380-700 nm), Hg0(g) uptake was only observed on TiO2, with γ = (4 ± 3) × 10-4. Raising the relative humidity inhibited the uptake on both TiO2 and Al2O3, and the uptake coefficient at 60% RH for TiO2 under UV-A irradiation was lower by ca. 3 orders of magnitude than dry conditions. Furthermore, we observed that water vapor induced the desorption of two distinct fractions from Hg-exposed surfaces via the displacement of weakly, physisorbed Hg and the photocatalyzed reduction of chemisorbed Hg. Based on the uptake coefficients from this report, we estimate that heterogeneous interactions with mineral dust may be significant under conditions with low relative humidity (<30%) and high dust loading masses. We herein discuss the implication of this study on understanding the life cycle analysis of atmospheric mercury in nature.
RESUMO
Numerous anthropogenic and natural particle contaminants exist in diverse aquatic systems, with widely unknown environmental fates. We coupled a flow tube with a digital in-line holographic microscopy (nano-DIHM) technique for aquatic matrices, for in situ real-time analysis of particle size, shape, and phase. Nano-DIHM enables 4D tracking of particles in water and their transformations in three-dimensional space. We demonstrate that nano-DIHM can be automated to detect and track oil spills/oil droplets in dynamic systems. We provide evidence that nano-DIHM can detect the MS2 bacteriophage as a representative biological-viral material and mercury-containing particles alongside other heavy metals as common toxic contaminants. Nano-DIHM shows the capability of observation of combined materials in water, characterizing the interactions of various particles in mixtures, and particles with different coatings in a suspension. The observed sizes of the particles and droplets ranged from â¼1 to 200 µm. We herein demonstrate the ability of nano-DIHM to characterize and distinguish particle-based contaminants in water and their interactions in both stationary and dynamic modes with a 62.5 millisecond time resolution. The fully automated software for dynamic and real-time detection of contaminants will be of global significance. A comparison is also made between nano-DIHM and established techniques such as S/TEM for their different capabilities. Nano-DIHM can provide a range of physicochemical information in stationary and dynamic modes, allowing life cycle analysis of diverse particle contaminants in different aquatic systems, and serve as an effective tool for rapid response for spills and remediation of natural waters.
Assuntos
Holografia , Metais Pesados , Holografia/métodos , Tamanho da Partícula , Suspensões , Água/análiseRESUMO
Black carbon (BC) plays an important role in climate and health sciences. Using the combination of a year real-time BC observation (photoacoustic extinctiometer) and data for PM2.5 and selected co-pollutants, we herein show that annual BC Mass concentration has a bi-modal distribution, in a cold-climate city of Montreal. In addition to the summer peak, a winter BC peak was observed (up to 0.433 µg/m3), lasting over 3 months. A comparative study between two air pollution hotspots, downtown and Montreal international airport indicated that airborne average BC Mass concentration in downtown was 0.344 µg/m3, whereas in the residential areas around Montreal airport BC Mass values were over 400% higher (1.487 µg/m3). During the numerous snowfall events, airborne BC Mass concentration decreased. High-resolution scanning/transmission electron microscopy with energy dispersive X-ray spectroscopy analysis of the snow samples provided evidence that airborne BC particles or carbon nanomaterials were indeed transferred from polluted air to snow. During the COVID-19 lockdown, the BC concentration and selected co-pollutants, decreased up to 72%, confirming the predominance of anthropogenic activities in BC emission. This first cold-climate BC data set can be essential for more accurate air quality and climate modeling. About one-third of the Earth's land surface receive snow annually, the impact of this study on air quality, health and climate change is discussed.
RESUMO
OBJECTIVE: To compare ambient air quality standards for the mass concentration of aerosol particles smaller than approximately 2.5 µm (PM2.5) and exposure to these particles in national and regional jurisdictions worldwide. METHODS: We did a review of government documents and literature on air quality standards. We extracted and summarized the PM2.5 concentration limits effective before July 2020, noting whether standards were enforced, voluntary or target. We compared averaging methods and permitted periods of time that standards may be exceeded. We made a descriptive analysis of PM2.5 standards by population, total area and population density of jurisdictions. We also compared data on actual PM2.5 air quality against the standards. FINDINGS: We obtained data on standards from 62 jurisdictions worldwide, including 58 countries. Of the world's 136.06 million km2 land under national jurisdictions, 71.70 million km2 (52.7%) lack an official PM2.5 air quality standard, and 3.17 billion people live in areas without a standard. The existing standards ranged from 8 to 75 µg/m3, mostly higher than the World Health Organization guideline annual limit of < 10 µg/m3. The weakest PM2.5 standards were often exceeded, while the more stringent standards were often met. Several jurisdictions with the highest population density demonstrated compliance with relatively stringent standards. CONCLUSION: The metrics used in PM2.5 ambient air quality standards should be harmonized worldwide to facilitate accurate assessment of risks associated with PM2.5 exposure. Population density alone does not preclude stringent PM2.5 standards. Modernization of standards can also include short-term standards to unmask PM2.5 fluctuations in high-pollution areas.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar/análise , Monitoramento Ambiental , Material Particulado/normas , Poluentes Atmosféricos/efeitos adversos , Poluição do Ar/efeitos adversos , Austrália , Canadá , Humanos , Material Particulado/análiseRESUMO
Discarded micro/nano-plastic inputs into the environment are emerging global concerns. Yet the quantification of micro/nanoplastics in complex environmental matrices is still a major challenge, notably for soluble ones. We herein develop in-laboratory built nanostructures (zinc oxide, titanium oxide and cobalt) coupled to mass spectrometry techniques, for picogram quantification of micro/nanoplastics in water and snow matrices, without sample pre-treatment. In parallel, an ultra-trace quantification method for micro/nanoplastics based on nanostructured laser desorption/ionization time-of-flight mass spectrometry (NALDI-TOF-MS) is developed. The detection limit is â¼5 pg for ambient snow. Soluble polyethylene glycol and insoluble polyethylene fragments were observed and quantified in fresh falling snow in Montreal, Canada. Complementary physicochemical studies of the snow matrices and reference plastics using laser-based particle sizers, inductively coupled plasma tandem mass spectrometry, and high-resolution scanning/transmission electron microscopy, produced consistent results with NALDI, and further provided information on morphology and composition of the micro/nano-plastic particles. This work is promising as it demonstrates that a wide range of recyclable nanostructures, in-laboratory built or commercial, can provide ultra-trace capability for quantification for both soluble polymers and insoluble plastics in air, water and soil. It may thereby produce key missing information to determine the fate of micro/nanoplastics in the environment, and their impacts on human health.
Assuntos
Microplásticos , Poluentes Químicos da Água , Canadá , Plásticos , Polímeros , Neve , Água , Poluentes Químicos da Água/análiseRESUMO
In situ and real-time characterization of aerosols is vital to several fundamental and applied research domains including atmospheric chemistry, air quality monitoring, or climate change studies. To date, digital holographic microscopy is commonly used to characterize dynamic nanosized particles, but optical traps are required. In this study, a novel integrated digital in-line holographic microscope coupled with a flow tube (Nano-DIHM) is demonstrated to characterize particle phase, shape, morphology, 4D dynamic trajectories, and 3D dimensions of airborne particles ranging from the nanoscale to the microscale. We demonstrate the application of Nano-DIHM for nanosized particles (≤200 nm) in dynamic systems without optical traps. The Nano-DIHM allows observation of moving particles in 3D space and simultaneous measurement of each particle's three dimensions. As a proof of concept, we report the real-time observation of 100 nm and 200 nm particles, i.e. polystyrene latex spheres and the mixture of metal oxide nanoparticles, in air and aqueous/solid/heterogeneous phases in stationary and dynamic modes. Our observations are validated by high-resolution scanning/transmission electron microscopy and aerosol sizers. The complete automation of software (Octopus/Stingray) with Nano-DIHM permits the reconstruction of thousands of holograms within an hour with 62.5 millisecond time resolution for each hologram, allowing to explore the complex physical and chemical processes of aerosols.
RESUMO
Ferrihydrite is ubiquitous in natural environments and is usually co-precipitated with impure ions and toxic contaminants like Al(III) and Sb(V) during the neutralization process of acid mine drainage. However, little is known about the dynamic interactions among ferrihydrite, Al(III) and Sb(V). In this study, the influence of coprecipitated Al(III) and Sb(V) on the transformation of ferrihydrite was investigated. The samples were characterized by X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and transmission electron microscopy before and after aging for 10 days at 70 °C. Results indicated that the Al(III) enhanced the immobilization of Sb(V) under neutral and alkaline conditions, and the presence of Sb(V) induced more production of extractable Al(III). XRD patterns revealed that the transformation rate of coprecipitated Al(III) and Sb(V) ferrihydrite was higher than Al-coprecipitated ferrihydrite. It is speculated that the presence of Sb(V) weakened the inhibition of Al(III) under experimental conditions. Competitive reaction of Al(III) and Sb(V) for substitution on the lattice Fe of ferrihydrite, likely decreased Al(III) substitution on ferrihydrite, and thus increased the observed transformation rate of ferrihydrite. These results have significant environmental implications for predicting the role of impurities and contaminants on ferrihydrite transformation processes.
RESUMO
In this study a novel sustainable method based on supercritical fluid extraction (SFE) method was developed for simultaneous extraction and fractionation of petroleum biomarkers. We herein proposed a two-step supercritical fluid extraction method for crude oil and tar ball to separate the petroleum biomarkers into aliphatic and aromatic fractions. In the first step, pure scCO2 was used, while scCO2 modified was used as a solvent in the subsequent step. CO2 SFE can serve as an environmental-friendly alternative to common column chromatography method for petroleum biomarker or compositional analysis by GC-MS. The extraction process was shown to be selective, according to the polarity of the solvent, providing fractionation of aliphatic and aromatic hydrocarbons. Yet the total extraction procedure in SFE was significantly faster than column chromatography methods (~80 min vs. 8 h). We will discuss the implications of this SFE method as a novel sustainable alternative to the existing extraction techniques.
Assuntos
Cromatografia com Fluido Supercrítico , Petróleo/análise , Biomarcadores , Fracionamento Químico , Cromatografia Gasosa-Espectrometria de MassasRESUMO
The authors would like to call the reader's attention to the fact that, unfortunately, there was an unintentional oversight regarding the funding information in this manuscript; please find the correct information below.
RESUMO
The phase of oxidized mercury is critical in the fate, transformation, and bioavailability of mercury species in Earth's ecosystem. There is now evidence that what is measured as gaseous oxidized mercury (GOM) is not only gaseous but also consists of airborne nanoparticles with distinct physicochemical properties. Herein, we present the development of the first method for the consistent and reproducible generation of oxidized mercury nano- and sub-micron particles (~ 5 to 400 nm). Oxidized mercury nanoparticles are generated using two methods, vapor-phase condensation and aqueous nebulization, for three proxies: mercury(II) bromide (HgBr2), mercury(II) chloride (HgCl2), and mercury(II) oxide (HgO). These aerosols are characterized using scanning mobility and optical sizing, high-resolution scanning transmission electron microscopy (STEM), and nano/microparticle interface coupled to soft ionization mercury mass spectrometric techniques. Synthetic nanoparticle stability was studied in aqueous media, and using a microcosm at ambient tropospheric conditions of ~ 740 Torr pressure, room temperature, and at relative humidity of approximately 20%. Analysis of microcosm airborne nanoparticles confirmed that generated synthetic mercury nanoparticles retain their physical properties once in air. KCl-coated denuders, which are currently used globally to measure gaseous mercury compounds, were exposed to generated oxidized mercury nanoparticles. The degree of synthetic mercury nanoparticle capture by KCl-coated denuders and particulate filters was assessed. A significant portion of nanoparticulate and sub-micron particulate mercury was trapped on the KCl-coated denuder and measured as GOM. Finally, we demonstrate the applicability of soft ionization mercury mass spectrometry to the measurement of mercury species present in the gaseous and solid phase. We recommend coupling of this technique with existing methodology for a more accurate representation of mercury biogeochemistry cycling. Graphical Abstract.
RESUMO
Kaolin, a natural and inexpensive clay mineral, is ubiquitous in soil, dirt, and airborne particles. Amongst four commonly available clay minerals, kaolin, as a result of its layered structure, is the most efficient natural gaseous Hg adsorbent to date (Langmuir maximum adsorption capacity Qm =574.08â µg g-1 and Freundlich Qm =756.49â µg g-1 ). The Hg uptake proceeds by homogeneous monolayer and heterogeneous processes. Hg physisorption on kaolin occurs in the dark, yet the adsorption rate is enhanced upon irradiation. The effects of several metal complexes, salts, halides and solvents on the Hg uptake were examined. The addition of CuCl2 particles leads to a significant enhancement of the Hg uptake capacity (>30â times) within second timescales and without irradiation. The physisorption with kaolin is switched to chemisorption upon the addition of CuCl2 to kaolin. This process is entirely reversible upon the addition of Zn/Sn granules at room temperature without any added energy. However, the investment of a small amount of renewable energy can speed up the process. This technology demonstrates the facile and efficient capture and recycling of elemental Hg0 from air. A wide range of metal particles and diverse physicochemical processes, which include the microphysics of nucleation, are herein examined to explore the potential reaction mechanism by using a suite of complementary analytical techniques. These new mechanistic insights open a new era of energy-neutral environmental remediation based on natural soil/airborne particles.
RESUMO
In this work, reverse micelle-based supramolecular solvent microextraction method coupled with supercritical fluid extraction and used for determining trace amounts of polycyclic aromatic hydrocarbons in apple peels. The extract was analyzed by high-performance liquid chromatography equipped with a fluorescence detector. Coupling supramolecular solvent microextraction with supercritical fluid extraction method, resolve low preconcentration factor of supercritical fluid extraction method, improved limit of detection of polycyclic aromatic hydrocarbons and allow the use of supramolecular solvent microextraction in solid matrices. The effective parameters on the supramolecular solvent microextraction and supercritical fluid extraction efficiency were optimized using one variable at a time and face centered design methods, respectively. Under the optimum condition, the limits of detection and limits of quantifications were in the range of 0.34-1.27 and 1.03-3.82 µg/kg, respectively. Analysis of polycyclic aromatic hydrocarbons in apple peels showed that the supercritical fluid extraction/ supramolecular solvent microextraction method provide great potential for trace analysis of polycyclic aromatic hydrocarbons in fruit samples (RSDs < 7.7%).
Assuntos
Cromatografia com Fluido Supercrítico , Microextração em Fase Líquida , Malus/química , Hidrocarbonetos Policíclicos Aromáticos/análise , Frutas/química , Substâncias Macromoleculares , Solventes/químicaRESUMO
Chemical dyes are used in a wide range of anthropogenic activities and are generally not biodegradable. Hence, sustainable recycling processes are needed to avoid their accumulation in the environment. A one-step synthesis of Fecore-maghemiteshell (Fe-MM) for facile, instantaneous, cost-effective, sustainable, and efficient removal of brilliant green (BG) dye from water has been reported here. The homogenous and monolayer type of adsorption is, to our knowledge, the most efficient, with a maximum uptake capacity of 1000 mg·g-1, for BG on Fe-MM. This adsorbent was shown to be efficient in occurring in time-scales of seconds and to be readily recyclable (ca. 91%). As iron/iron oxide possesses magnetic behavior, a strong magnet could be used to separate Fe-MM coated with BG. Thus, the recycling process required a minimum amount of energy. Capping Fe-MM by hydrophilic clay minerals further enhanced the BG uptake capacity, by reducing unwanted aggregation. Interestingly, capping the adsorbent by hydrophobic plastic (low-density polyethylene) had a completely inverse effect on clay minerals. BG removal using this method is found to be quite selective among the five common industrial dyes tested in this study. To shed light on the life cycle analysis of the composite in the environment, the influence of selected physicochemical factors (T, pH, hν, O3, and NO2) was examined, along with four types of water samples (melted snow, rain, river, and tap water). To evaluate the potential limitations of this technique, because of likely competitive reactions with metal ion contaminants in aquatic systems, additional experiments with 13 metal ions were performed. To decipher the adsorption mechanism, we deployed four reducing agents (NaBH4, hydrazine, LiAlH4, and polyphenols in green tea) and NaBH4, exclusively, favored the generation of an efficient adsorbent via aerial oxidation. The drift of electron density from electron-rich Fecore to maghemite shells was attributed to be responsible for the electrostatic adsorption of N+ in BG toward Fe-MM. This technology is deemed to be environmentally sustainable in environmental remediation, namely, in waste management protocol.
RESUMO
Mercury is an important global toxic contaminant of concern that causes cognitive and neuromuscular damage in humans. It is ubiquitous in the environment and can travel in the air, in water, or adsorb to soils, snow, ice and sediment. Two significant factors that influence the fate of atmospheric mercury, its introduction to aquatic and terrestrial environments, and its bioaccumulation and biomagnification in biotic systems are the chemical species or forms that mercury exists as (elemental, oxidized or organic) and its physical phase (solid, liquid/aqueous, or gaseous). In this work, we show that previously unknown mercury-containing nanoparticles exist in the air using high-resolution scanning transmission electron microscopy imaging (HR-STEM). Deploying an urban-air field campaign near a mercury point source, we provide further evidence for mercury nanoparticles and determine the extent to which these particles contain two long suspected forms of oxidized mercury (mercuric bromide and mercuric chloride) using mercury mass spectrometry (Hg-MS). Using optical particle sizers, we also conclude that the conventional method of measuring gaseous oxidized mercury worldwide can trap up to 95% of nanoparticulate mercuric halides leading to erroneous measurements. Finally, we estimate airborne mercury aerosols may contribute to half of the oxidized mercury measured in wintertime Montréal urban air using Hg-MS. These emerging mercury-containing nanoparticle contaminants will influence mercury deposition, speciation and other atmospheric and aquatic biogeochemical mercury processes including the bioavailability of oxidized mercury to biota and its transformation to neurotoxic organic mercury.
RESUMO
Arctic snow has been shown to be a reactive interface for key physical, chemical, and microbiological processes, affecting the Arctic's oxidation, biodiversity, radiation, and climate. To explore the potential links between snow-borne metal contaminants and metal-interactive bacteria, to freezing/melting processes, we performed concurrent chemical characterization, genomic, and morphological analysis of five different Arctic snowpack (accumulated, blowing, fresh falling, surface hoar, and wind pack snow) and frost flower in Utqiagvik (Barrow), Alaska, using Montreal urban snow as reference. Several complementary analytical techniques, including triple quad ICP-MS/MS along with various chromatography techniques, thermal ionization mass spectrometer (TIMS), high-resolution transition electron microscopy with electron dispersive X-ray spectroscopy (HR-TEM/EDS), and next generation sequencing (NGS), were deployed. Distinct metal composition and bacterial distribution among samples were observed. The concentration of 27 different transition, post-transition, rare, and radioactive metals were determined in molten snow and frost flower, as well as filtered samples. The range of three highest detected metal concentrations among samples were: Hg (3.294-134.485⯵g/L), Fe (0.719-34.469⯵g/L), and Sr (1.676-19,297.000⯵g/L). NGS analysis led to the identification of metal interacting bacteria in all types of snow and frost flowers in the Arctic (blowing snow (1239), surface hoar snow (2243), windpack (2431), frost flowers (1440)), and Montreal urban snow (5498)) with specific bacterial genera such as: Acinetobacter, Arcenicella, Azospirillum (surface hoar snow), Arthrobacter, Paenibacillus (blowing snow), and Cycloclasticus, OM182 clade (frost flower). Several types of bacteria with confirmed or associated ice nucleation activity were observed in different types of snow, and frost flower including Pseudomonas genera (e.g., Pseudomonas fluorescens), Flavobacterium, Corynebacterium, and Pseudoxanthomonas. The implications of the above findings to snow-air interactions including nanoparticles, namely during melting and freezing cycles, and to probe the impact of various natural and anthropogenic activities are herein discussed.
Assuntos
Mudança Climática , Monitoramento Ambiental , Camada de Gelo/microbiologia , Metais/análise , Alaska , Regiões Árticas , Flores , Congelamento , Metais/metabolismo , Neve/química , Neve/microbiologiaRESUMO
The Athabasca Oil Sands Region (AOSR) in Alberta, Canada, is an important source of atmospheric pollutants, such as aerosols, that have repercussions on both the climate and human health. We show that the mean freezing temperature of snow-borne particles from AOSR was elevated (-7.1⯱â¯1.8⯰C), higher than mineral dust which freezes atâ¯â¼â¯-15⯰C and is recognized as one of the most relevant ice nuclei globally. Ice nucleation of nanosized snow samples indicated an elevated freezing ability (-11.6⯱â¯2.0⯰C), which was statistically much higher than snow-borne particles from downtown Montreal. AOSR snow had a higher concentration (â¼2 orders of magnitude) of >100â¯nm particles than Montreal. Triple quadrupole ICP-(QQQ)-MS/MS analysis of AOSR and Montreal snow demonstrated that most concentrations of metals, including those identified as emerging nanoparticulate contaminants, were much more elevated in AOSR in contrast to Montreal: 34.1, 34.1, 16.6, 5.8, 0.3, 0.1, and 9.4â¯mg/m3 for Cr, Ni, Cu, As, Se, Cd, and Pb respectively, in AOSR and 1.3, 0.3, 2.0, <0.03, 0.1, 0.03, and 1.2â¯mg/m3 in Montreal snow. High-resolution Scanning Transmission Electron Microscopy/Energy-dispersive X-ray Spectroscopy (STEM-EDS) imaging provided evidence for various anthropogenic nano-materials, including carbon nanotubes resembling structures, in AOSR snow up to 7-25â¯km away from major oil sands upgrading facilities. In summary, particles characterized as coming from oil sands are more efficient at ice nucleation. We discuss the potential impacts of AOSR emissions on atmospheric and microphysical processes (ice nucleation and precipitation) both locally and regionally.
Assuntos
Poluição do Ar/análise , Monitoramento Ambiental/métodos , Nanopartículas Metálicas/análise , Nanotubos de Carbono/análise , Neve/química , Aerossóis/análise , Alberta , Poeira/análise , Gelo , Microscopia Eletrônica de Transmissão e Varredura , Campos de Petróleo e Gás , Tamanho da Partícula , Espectrometria por Raios X , Espectrometria de Massas em TandemRESUMO
A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.