Armored Urease: Enzyme-Bioconjugated Poly(acrylamide) Hydrogel as a Storage and Sensing Platform.

Jack bean urease is an important enzyme not only because of its numerous uses in medical and other fields but also because of its historical significance-the first enzyme to be crystallized and also the first nickel metalloenzyme. This enzyme hydrolyzes urea into ammonia and carbon dioxide; however, the stability of this enzyme at ambient temperature is a bottleneck for its applicability. To improve urease stability, it was immobilized on different substrates, particularly on polymeric hydrogels. In this study, the enzyme was coupled covalently with poly(acrylamide) hydrogel with an yield of 18µmol/cm3. The hydrogel served as the nanoarmor and protected the enzyme against denaturation. The enzyme immobilized on the polymer hydrogel showed no loss in activity for more than 30 days at ambient temperature, whereas free enzyme lost its activity within a couple of hours. The Michaelis-Menten constant (Km) for free and immobilized urease were 0.0256 and 0.2589mM, respectively, on the first day of the study. The Km of the immobilized enzyme was approximately 10 times higher than that of the free enzyme. The hydrogel technique was also used to prepare light diffracting polymerized colloidal crystal array in which urease enzyme was covalently immobilized. This system was applied for the detection of mercury (Hg2+) with the lower limit as 1ppb, which is below the maximum contaminant limit (2ppb) for mercury ions in water. The experimental details of these studies are presented in this chapter.

Recent strategies to develop self-healable crosslinked polymeric networks.

Autonomous self-healable crosslinked materials designed with built-in ability to repair physical damage and cracks can prevent catastrophic failure and thus extend the lifetime of materials. They also retain their dimensional stability, mechanical strength, thermal stability, and solvent resistance. These features promote the development of effective self-healing materials for various applications. This review summarizes recent advances in the development of novel self-healable polymeric materials, both through extrinsic methods involving the encapsulation of extra healing agents in microcapsules and through intrinsic methods utilizing the formation of reversible chemical or physical crosslinks. Further, the outlook is briefly discussed on the important aspects for the current and future development of self-healable materials.

Poly(AAc-co-MBA) hydrogel films: adhesive and mechanical properties in aqueous medium.

Poly(acrylic acid-co-N,N'-methylenebisacrylamide) hydrogel films were synthesized by copolymerizing acrylic acid (AAc) with N,N'-methylenebisacrylamide (MBA) as a cross-linker via photo polymerization in the spacing confined between two glass plates. NMR spectroscopy was utilized to determine the cross-linking density. We found that the cross-linking density determined by NMR is higher than that expected from the feed concentrations of cross-linkers, suggesting that MBA is more reactive than AAc and the heterogeneous nature of the cross-linking. In addition to the swelling tests, indentation tests were performed on the hydrogel films under water to investigate effects of the cross-linking density on the adhesion and mechanical properties of the hydrogel films in terms of adhesive pull-off force and Hertz-type elastic modulus. As the cross-linker concentration increased, the effective elastic modulus of the hydrogel films increased dramatically at low cross-linking densities and reached a high steady-state value at higher cross-linking densities. The pull-off force decreased with increasing cross-linker concentration and reached a lower force plateau at high cross-linking densities. An optimal "trade-off" cross-linking density was determined to be 0.02 mol fraction of MBA in the hydrogel, where balanced elastic modulus and adhesive pull-off force can be obtained.

Charged polystyrene nanoparticles: role of ionic comonomers structures.

Emulsion copolymerizations of styrene were carried out with four structurally different ionic comonomers namely acrylic acid (AAc), methacrylic acid (MAA), 2-hydroxyethyl methacrylate (HEMA), and sodium styrene sulfonate (NaSS) to study the effect of monomer structure on the copolymerization kinetics and size, morphology, charge density, and the self-assembly of the particles. The copolymerization kinetics was found to be highly dependent upon the ionic comonomer structure, and the nature of this dependence altered from homogeneous to micellar nucleation regime. The decrease in particle size (D) with increasing surfactant concentration (S) was observed in all the cases; however, the exponents of D vs. S were not similar for all the cases. In the homogeneous nucleation regime, exponents followed the order as AAc (0.446) > MAA (0.396) > NaSS (0.252) > HEMA (0.241), whereas the order was almost reversed in the micellar nucleation regime as NaSS (0.406) > HEMA (0.228) > AAc (0.206) > MAA (0.172). The hydrophobic/hydrophilic character and the steric factors were found to be the driving force for the variation in D vs. S exponents with ionic comonomer structure. The presence of charges on the particle surface contributed by the ionic comonomers triggered the self-assembly of the particles upon sedimentation and diffracted visible light obeying Bragg's law.

Formation of core (polystyrene)-shell (polybenzimidazole) nanoparticles using sulfonated polystyrene as template.

We report formation of core (polystyrene)-shell (polybenzimidazole) nanoparticles from a new blend system consisting of an amorphous polymer polybenzimidazole (PBI) and an ionomer sodium salt of sulfonated polystyrene (SPS-Na). The ionomer used for the blending is spherical in shape with sulfonate groups on the surface of the particles. An in depth investigation of the blends at various sulfonation degrees and compositions using Fourier transform infrared (FT-IR) spectroscopy provides direct evidence of specific hydrogen bonding interactions between the N-H groups of PBI and the sulfonate groups of SPS-Na. The disruption of PBI chains self association owing to the interaction between the functional groups of these polymer pairs is the driving force for the blending. Thermodynamical studies carried out by using differential scanning calorimeter (DSC) establish partially miscible phase separated blending of these polymers in a wider composition range. The two distinguishable glass transition temperatures (T(g)) which are different from the neat components and unaltered with the blends composition attribute that the domain size of heterogeneity (d(d)) of the blends is >20 nm since one of the blend component (SPS-Na particle) diameter is ∼70 nm. The diminish of PBI chains self association upon blending with SPS-Na particles and the presence of invariant T(g)'s of the blends suggest the wrapping of PBI chains over the SPS-Na spherical particle surface and hence resulting a core-shell morphology. Transmission electron microscopy (TEM) study provides direct evidence of core-shell nanoparticle formation; where core is the polystyrene and shell is the PBI. The sulfonation degree affects the blends phase separations. The higher degree of sulfonation favors the disruption of PBI self association and thus forms partially miscible two phases blends with core-shell morphology.

Blends of polybenzimidazole and poly(vinylidene fluoride) for use in a fuel cell.

We report a new blend system consisting of an amorphous polymer polybenzimidazole (PBI) and a semicrystalline polymer poly(vinylidene fluoride) (PVDF). A systematic investigation of the blend pair in various compositions using Fourier transform infrared (FT-IR) spectroscopy provides direct evidence of specific hydrogen bonding interaction involving the N-H groups of PBI and the >CF(2) groups of PVDF. Blending shows a maximum 30 cm(-1) frequency shift in the N-H stretching band of PBI and also the existence of a partial double bond character in the PVDF chain. Differential scanning calorimetry (DSC) study proves the miscibility of these polymers in a wider composition range. The decrease of the T(g) with increasing PVDF in the blend and also the decrease of both the T(m) and T(c) with increasing PBI in the blend attribute the miscibility of the blend systems. The PA doping level of the blend membranes improves significantly as a result of the hydrophobic nature of the PVDF component.

Tuning the molecular properties of polybenzimidazole by copolymerization.

In the present work, a series of novel random polybenzimidazole (PBI) copolymers consisting of m- and p-phenylene linkages are synthesized from various stoichiometric mixtures of isophthalic acid (IPA) and terephthalic acid (TPA) with 3,3',4,4'-tetraaminobiphenyl (TAB) by solution copolycondensation in polyphosphoric acid (PPA). The resulting copolymers are characterized by different techniques to obtain their molecular properties parameters. The monomer concentration in the polymerization plays an important role in controlling the molecular weight of the polymer. Surprisingly, a simple change in the dicarboxylic acid architecture from meta (IPA) to para (TPA) increases the molecular weight of the copolymers, which is maximum for the para homopolymer. The low solubility of TPA in PPA is found to be the dominating factor for obtaining the higher molecular weight polymer in the case of the para structure. FT-IR study shows that the introduction of the para structure enhances the conjugation along the polymer chain. The positive deviation of the copolymer composition from the feed ratio is due to the higher reactivity ratio of TPA than IPA, which is obtained from proton NMR studies. The incorporation of the para structure in the chain enhances the thermal stability of the polymers. The para homopolymer shows 59 degrees C lower glass transition temperature compare to the meta homopolymer indicating enhancement of the flexibility of the polymer chain due the introduction of the p-phenylene linkage in the backbone. The T(g) of the copolymers shows both positive and negative deviation from the expected T(g) calculated by the Fox equation. The enhanced conjugation of the polymer chains also influences the photophysical properties of the polymers in solution. All the PBI polymers exhibit strong fluorescence in dimethylacetamide solution. As expected, that all the polymers are amorphous in nature reveals that the copolymerization does not influence the packing characteristics of the PBI chains.