Contrasting gut bacteriomes unveiled between wild Antheraea assamensis Helfer (Lepidoptera: Saturniidae) and domesticated Bombyx mori L. (Lepidoptera: Bombycidae) silkworms.

BACKGROUND: Insect gut microbiomes play a fundamental role in various aspects of insect physiology, including digestion, nutrient metabolism, detoxification, immunity, growth and development. The wild Muga silkworm, Antheraea assamensis Helfer holds significant economic importance, as it produces golden silk. METHODS AND RESULTS: In the current investigation, we deciphered its intricate gut bacteriome through high-throughput 16S rRNA amplicon sequencing. Further, to understand bacterial community dynamics among silkworms raised under outdoor environmental conditions, we compared its gut bacteriomes with those of the domesticated mulberry silkworm, Bombyx mori L. Most abundant bacterial phyla identified in the gut of A. assamensis were Proteobacteria (78.1%), Bacteroidetes (8.0%) and Firmicutes (6.6%), whereas the most-abundant phyla in B. mori were Firmicutes (49-86%) and Actinobacteria (10-36%). Further, Gammaproteobacteria (57.1%), Alphaproteobacteria (10.47%) and Betaproteobacteria (8.28%) were the dominant bacterial classes found in the gut of A. assamensis. The predominant bacterial families in A. assamensis gut were Enterobacteriaceae (27.7%), Comamonadaceae (9.13%), Pseudomonadaceae (9.08%) Flavobacteriaceae (7.59%) Moraxellaceae (7.38%) Alteromonadaceae (6.8%) and Enterococcaceae (4.46%). In B. mori, the most-abundant bacterial families were Peptostreptococcaceae, Enterococcaceae, Lactobacillaceae and Bifidobacteriaceae, though all showed great variability among the samples. The core gut bacteriome of A. assamensis consisted of Pseudomonas, Acinetobacter, Variovorax, Myroides, Alteromonas, Enterobacter, Enterococcus, Sphingomonas, Brevundimonas, Oleispira, Comamonas, Oleibacter Vagococcus, Aminobacter, Marinobacter, Cupriavidus, Aeromonas, and Bacillus. Comparative gut bacteriome analysis revealed a more complex gut bacterial diversity in wild A. assamensis silkworms than in domesticated B. mori silkworms, which contained a relatively simple gut bacteriome as estimated by OTU richness. Predictive functional profiling of the gut bacteriome suggested that gut bacteria in A. assamensis were associated with a wide range of physiological, nutritional, and metabolic functions, including biodegradation of xenobiotics, lipid, amino acid, carbohydrate metabolism, and biosynthesis of secondary metabolites and amino acids. CONCLUSIONS: These results showed great differences in the composition and diversity of gut bacteria between the two silkworm species. Both insect species harbored core bacterial taxa commonly found in insects, but the relative abundance and composition of these taxa varied markedly.

Unicystic ameloblastoma - A case series.

Ameloblastoma is a benign, locally aggressive neoplasm that constitutes about 1-3% of the tumors of the jaw. Wide surgical excision with adequate safe margin is the most common treatment of choice. The study aimed to manage cases with unicystic ameloblastoma while preserving the continuity of the mandible (without resection). This article presents a series of cases ranging from 18 to 40 years old patients of both sexes with unicystic ameloblastoma, especially in the mandible showing more male predilection than female. All the cases presented in this article were treated by enucleation and curettage. None of the patients presented post-operative paresthesia. None of the cases went in for resection. Post-operative recovery was uneventful in all the patients. All the patients were followed up for a period of 3.5-5 years. None of the cases reported recurrence at the date of publication.

Familial Gigantiform Cementoma: Life-Saving Total Midface Resection and Reconstruction Using Virtual Surgical Planning and 3D Printed Patient-Specific Implant-A Clinical Study.

Background: Familial gigantiform cementoma (FGC) is a rare benign fibrocemento-osseous lesion of the jaw characterized by well-circumscribed, extensive, mixed radiolucent-radiopaque masses in the mandible and the maxilla that can cause severe facial deformity. This condition is extremely rare with less than 40 cases reported in the literature. Purpose: The purpose of the paper is to highlight the importance of virtual surgical planning and patient-specific implant in the treatment of a complex lesion and reconstruction of the facial skeleton. The clinical presentations, and diagnostic challenges encountered when managing the lesion have been discussed in this article with emphasis on the treatment plan. Method/Surgical plan: The sequence of treatment planned was resection of the lesion and immediate reconstruction with a patient-specific implant to improve the patient's quality of life. The management of FGC was a challenging one keeping in mind the rapid expansion of the lesion, widespread involvement of the jaws, and needs of the pediatric patient. Conclusion: Virtual surgical planning (VSP) along with 3D printed implant was instrumental in reconstructing the facial form of the child where the maxilla was completely resected and rehabilitation provided support to the vital structures of the face.

Impact of reactivity controlled compression ignition (RCCI) mode engine operation in diesel engine powered with B20 blend of waste cooking oil biodiesel.

The purpose of this study is to conduct an experimental assessment of the impact of RCCI (reactivity regulated compression ignition) on the performance, emissions, and combustion of a CRDI engine. A fuel mix (20% biodiesel, 80% diesel, and a NaOH catalyst) is generated. The produced combination is evaluated for attributes using standards established by the American Society for Testing and Materials (ASTM). The engine research included three distinct kinds of injections: 10% Pen RCCI, 20% Pen RCCI, and 30% Pen RCCI. Increasing the injection pressure increases the brake thermal efficiency, often known as BTE. NOx emissions increased as a consequence of higher injection pressures and improved combustion. However, when the injection rate is increased, the Specific Fuel Consumption (SFC) falls. The CO2 and hydrocarbon emissions, as well as the smoke opacity values, increased as the charge increased. The resultant mixture may be utilized in a CI engine with pre-mixed ignition to improve overall engine performance as well as combustion characteristics.

Reduction of hazardous incinerated bio-medical waste ash and its environmental strain by utilizing in green concrete.

Incinerated Bio-Medical Waste Ash (IBWA) is toxic waste material with broad potential (cancer, genetic risk, premature death, permanent disease) to inflict severe health damage for the atmosphere and humans. This waste is disposed of as landfill, which contaminates the underground water and environment. The effective way of disposal of IBWA is by utilizing it as a building material, which can reduce the hazardous toxic materials. The use of Geopolymer Concrete (GPC) combined with IBWA as a substitute for Ground Granulated Blast Furnace Slag (GGBS) has been researched for its ability to create a new type of Green Concrete. The physical and chemical properties were observed for the raw materials. IBWA was used at 0, 5, 10, 15, 20, 25, 30, 35, 40, 45 and 50% replacement by weight for GGBS. Mixing proportions were 1:2.21:3.48 respectively for GGBS, Manufacturing Sand (M-sand), and coarse aggregate. Fresh properties and mechanical properties were examined for all specimens. The findings show an increase in the setting time and flow of concrete and a decrease in density with improved utilization of IBWA. On the other hand, IBWA replacement for GGBS enhanced the mechanical properties. These results revealed that IBWA could be partially replaced as source material for Geopolymer Concrete. This research may contribute to the reduction of dangerous IBWA as a building material.

Evaluation of stability and esthetic outcome following rigid fixation of a new sagittal genioplasty technique - A clinical study.

BACKGROUND: Routine and popular conventional genioplasty procedure is often curvilinear, requires lower border extension below, and behind the mental foramen, which after advancement has a tendency to produce step deformity, butt contact, hence nonunion, instability, and increased relapse tendencies. The present technique is aimed to study the new sagittal genioplasty technique and its efficacy to overcome the above-mentioned drawbacks of conventional genioplasty. This technique also aids in correcting mild-to-moderate breathing irregularities. MATERIALS AND METHODS: A total of 10 patients included in this study. The comparative analysis of the displacement of the chin in vertical and horizontal directions following surgery was evaluated by measuring the difference between preoperative, immediate postoperative, 3 and 6 months postoperative on lateral cephalometric radiographs. RESULTS: The study of new sagittal chin advancement results showed an advantage over conventional technique in terms of esthetics outcome (no jowl), easy to perform without damaging the mental nerve, superior healing with less relapse, and better surface area contact. CONCLUSION: In this study, the new technique of sagittal genioplasty overcomes the disadvantages of conventional genioplasty. However, this technique is best suited for patients who require straight or moderately vertical augmentation advancement genioplasty and is not suitable for asymmetry corrections, i.e., centering genioplasty and double sliding genioplasty.

Forecasting of COVID-19 using deep layer Recurrent Neural Networks (RNNs) with Gated Recurrent Units (GRUs) and Long Short-Term Memory (LSTM) cells.

In December 2019, first case of the COVID-19 was reported in Wuhan, Hubei province in China. Soon world health organization has declared contagious coronavirus disease (a.k.a. COVID-19) as a global pandemic in the month of March 2020. Over the span of eleven months, it has rapidly spread out all over the world with total confirmed cases of ~ 41.39 M and causing a total fatality of ~1.13 M. At present, the entire mankind is facing serious threat and it is believed that COVID-19 may have been around for quite some time. Therefore, it has become imperative to forecast the global impact of COVID-19 in the near future. The present work proposes state-of-art deep learning Recurrent Neural Networks (RNN) models to predict the country-wise cumulative confirmed cases, cumulative recovered cases and the cumulative fatalities. The Gated Recurrent Units (GRUs) and Long Short-Term Memory (LSTM) cells along with Recurrent Neural Networks (RNN) were developed to predict the future trends of the COVID-19. We have used publicly available data from John Hopkins University's COVID-19 database. In this work, we emphasize the importance of various factors such as age, preventive measures, and healthcare facilities, population density, etc. that play vital role in rapid spread of COVID-19 pandemic. Therefore, our forecasted results are very helpful for countries to better prepare themselves to control the pandemic.

Forecasting the dynamics of cumulative COVID-19 cases (confirmed, recovered and deaths) for top-16 countries using statistical machine learning models: Auto-Regressive Integrated Moving Average (ARIMA) and Seasonal Auto-Regressive Integrated Moving Average (SARIMA).

Most countries are reopening or considering lifting the stringent prevention policies such as lockdowns, consequently, daily coronavirus disease (COVID-19) cases (confirmed, recovered and deaths) are increasing significantly. As of July 25th, there are 16.5 million global cumulative confirmed cases, 9.4 million cumulative recovered cases and 0.65 million deaths. There is a tremendous necessity of supervising and estimating future COVID-19 cases to control the spread and help countries prepare their healthcare systems. In this study, time-series models - Auto-Regressive Integrated Moving Average (ARIMA) and Seasonal Auto-Regressive Integrated Moving Average (SARIMA) are used to forecast the epidemiological trends of the COVID-19 pandemic for top-16 countries where 70%-80% of global cumulative cases are located. Initial combinations of the model parameters were selected using the auto-ARIMA model followed by finding the optimized model parameters based on the best fit between the predictions and test data. Analytical tools Auto-Correlation function (ACF), Partial Auto-Correlation Function (PACF), Akaike Information Criterion (AIC) and Bayesian Information Criterion (BIC) were used to assess the reliability of the models. Evaluation metrics Mean Absolute Error (MAE), Mean Square Error (MSE), Root Mean Square Error (RMSE) and Mean Absolute Percent Error (MAPE) were used as criteria for selecting the best model. A case study was presented where the statistical methodology was discussed in detail for model selection and the procedure for forecasting the COVID-19 cases of the USA. Best model parameters of ARIMA and SARIMA for each country are selected manually and the optimized parameters are then used to forecast the COVID-19 cases. Forecasted trends for confirmed and recovered cases showed an exponential rise for countries such as the United States, Brazil, South Africa, Colombia, Bangladesh, India, Mexico and Pakistan. Similarly, trends for cumulative deaths showed an exponential rise for countries Brazil, South Africa, Chile, Colombia, Bangladesh, India, Mexico, Iran, Peru, and Russia. SARIMA model predictions are more realistic than that of the ARIMA model predictions confirming the existence of seasonality in COVID-19 data. The results of this study not only shed light on the future trends of the COVID-19 outbreak in top-16 countries but also guide these countries to prepare their health care policies for the ongoing pandemic. The data used in this work is obtained from publicly available John Hopkins University's COVID-19 database.

Mitigation of waste rubber tire and waste wood ash by the production of rubberized low calcium waste wood ash based geopolymer concrete and influence of waste rubber fibre in setting properties and mechanical behavior.

World-class trend set was focusing on finding an alternative for cement which is a major pollutant to the environment by releasing greenhouse gas emission. Meanwhile, disposal of waste by generating a suitable method for its effective utilization is a major role of researchers in global. Geopolymer is one of the most suitable alternatives for the utilization of all industrial wastes with aluminosilicate source material in which has a disadvantage of requirement of high alkaline solution and exposed temperature curing. In this study, alternative for cement in the view of low calcium based geopolymer was introduced to reduce the aforementioned problem in GPC. Meanwhile, GPC has a problem on less brittle, less energy absorption and impact resistance. Rubber tire is a huge available waste material which is most harmful to the environment if it burnt. Waste rubber tire has a property of high elasticity and it has an abundant way to use in the concrete. In order to counteract the aforementioned problems, waste rubber as a fiber was added at a variation of 0.5, 1, 1.5 and 2% of volume fractions. The addition of fibre up to 1 percent improved the setting properties and mechanical behaviors in all ages of curing. At the age of 90 days, the compressive strength, split tensile strength, flexural strength and modulus of elasticity of low calcium geopolymer mix was increased by 4.36%, 6.25%, 3.64% and 10.62% respectively. Further, addition of waste rubber fibre beyond 1 percent results in decreasing of all strength parameters.

Primary intraosseous adenoid cystic carcinoma of the mandible: A rare clinical entity.

Central intraosseous adenoid cystic carcinoma (ACC) of the mandible, formerly known as cylindroma, is a rare neoplasm with only 47 cases reported in the literature. We present a case of central ACC involving the mandible of a 55-year-old male patient.

Genetic relatedness does not predict the queen's successors in the primitively eusocial wasp, Ropalidia marginata.

Ropalidia marginata is a social wasp in which colonies consist of a single fertile queen and several sterile workers. If the queen is removed, one of the workers, potential queen (PQ), becomes hyperaggressive and becomes the next queen. The identity of the PQ cannot be predicted in the presence of the queen. The probability of a worker succeeding the queen is uncorrelated with her body size, dominance rank, ovarian or mating status, but imperfectly correlated with her age. Here, we investigate whether genetic relatedness help to predict the queen's successors. We constructed models based on successors being (i) most closely related to the queen, (ii) most closely related to the immediate predecessor queen/PQ, or (iii) having the highest relatedness to the majority of the workers; and (iv) having the highest average relatedness to all the workers. We predicted five successors from each of these models using pair-wise genetic relatedness estimated from polymorphic microsatellite loci. We independently performed serial queen/PQ removal experiments and compared the observed sequence of successors with the predictions from the models. The predictions of none of the models matched the experimental results; on an average 5-6 individuals predicted by the models were bypassed in the experiment. Thus, genetic relatedness is inadequate to predict the queen's successors in this species. We discuss why relatedness sometimes predicts the patterns of altruistic behaviour and sometimes not, and argue that the cost and benefit terms in Hamilton's rule, i.e. ecology, should be vigorously investigated when relatedness does not have adequate explanatory power.

Disruption of tetR type regulator adeN by mobile genetic element confers elevated virulence in Acinetobacter baumannii.

Acinetobacter baumannii is an important human pathogen and considered as a major threat due to its extreme drug resistance. In this study, the genome of a hyper-virulent MDR strain PKAB07 of A. baumannii isolated from an Indian patient was sequenced and analyzed to understand its mechanisms of virulence, resistance and evolution. Comparative genome analysis of PKAB07 revealed virulence and resistance related genes scattered throughout the genome, instead of being organized as an island, indicating the highly mosaic nature of the genome. Many intermittent horizontal gene transfer events, insertion sequence (IS) element insertions identified were augmenting resistance machinery and elevating the SNP densities in A. baumannii eventually aiding in their swift evolution. ISAba1, the most widely distributed insertion sequence in A. baumannii was found in multiple sites in PKAB07. Out of many ISAba1 insertions, we identified novel insertions in 9 different genes wherein insertional inactivation of adeN (tetR type regulator) was significant. To assess the significance of this disruption in A. baumannii, adeN mutant and complement strains were constructed in A. baumannii ATCC 17978 strain and studied. Biofilm levels were abrogated in the adeN knockout when compared with the wild type and complemented strain of adeN knockout. Virulence of the adeN knockout mutant strain was observed to be high, which was validated by in vitro experiments and Galleria mellonella infection model. The overexpression of adeJ, a major component of AdeIJK efflux pump observed in adeN knockout strain could be the possible reason for the elevated virulence in adeN mutant and PKB07 strain. Knocking out of adeN in ATCC strain led to increased resistance and virulence at par with the PKAB07. Disruption of tetR type regulator adeN by ISAba1 consequently has led to elevated virulence in this pathogen.

Neglected Recurrent Scalp Sinus: Calvarial Tuberculosis with Intracranial and Extracranial Extension.

BACKGROUND: Calvarial tuberculosis (TB) with intracranial tuberculoma and skin involvement is rare condition even in endemic regions. CASE PRESENTATION: A 43-year-old man presented with a generalized seizure, altered mental state, scalp swelling, and pus-discharging sinus over the scalp. Magnetic resonance imaging of the brain indicated a conflicting diagnosis of anaplastic meningiomas and chronic osteomyelitis with intracranial extension. Débridement and drainage of intracranial pus was performed. Histopathologic examination revealed TB. After surgery, the patient's general condition improved, and he was started on antitubercular drugs. CONCLUSIONS: Calvarial TB manifests with various clinical features, and strong clinical suspicion is needed to diagnose and treat it. Only a few cases of calvarial TB with either skin involvement or intracranial extension have been reported in the literature. The present case was challenging to diagnose with a rare presentation involving both intracranial and extracranial extension.

Evaluation of Spontaneous Bone Regeneration after Enucleation of Large Cysts of the Jaws using Radiographic Computed Software.

INTRODUCTION: Spontaneous regeneration of bone is commonly seen in the small surgical defects caused by enucleation of cysts. However, in case of large surgical defects caused by the enucleation, spontaneous regeneration of bone is a rare phenomenon and it depends on factors, such as age of the patient, intact periosteum, and proper stabilization. MATERIALS AND METHODS: The study included 16 patients, who reported to the department of oral and maxillofacial surgery with the complaint of pain and swelling in the jaws diagnosed as cyst. The sample included equal numbers of male and female subjects aged between 15 and 40 years. Panoramic radiographs were taken pre- and postoperatively on day 2 of the enucleation. The dimensions of the cyst were evaluated on the radiograph according to the proforma. Subsequent radiographs were taken at regular intervals of 1.5, 3, and 6 months using standard parameters and were analyzed using MCID™ analysis software of imaging research. RESULTS: Mean reduction was seen in up to 39 and 60% in the cystic cavity size and increase in the mean density up to 59 and 90.2% at 3 and 6 months intervals respectively. CONCLUSION: Spontaneous bone regeneration was seen even after primary closure of the large cystic defect without the need for placement of foreign substances or grafts and it also eliminated the complications resulting from placement of foreign substance. Further studies are required in a larger sample with longer follow-up durations to confirm the outcome of the present work for the benefit of patients. CLINICAL SIGNIFICANCE: The present study depicted that spontaneous bone regeneration can occur with accepted results after simple enucleation of jaw cyst without the aid of any graft material. Hence, simple enucleation may be considered as a first line of treatment modality for cystic lesion of the jaws. This simplifies the surgical procedure, decreases the economic and biologic costs, and reduces the risk of postoperative complications. Follow-up is necessary along with patient's compliance for the success of treatment.

Standard 3D Titanium Miniplate Versus Locking 3D Miniplate in Fracture of Mandible: A Prospective Comparative Study.

INTRODUCTION: The purpose/aim of the study conducted was to compare the efficiency between two principles of plating system, 3D non locking mini plates versus 3D locking mini plates. MATERIALS AND METHODS: A total of 20 adult patients were selected according to the inclusion criteria and divided into two groups of locking plates/screws and non-locking plates/screws of ten each. All patients were treated with 2.0 mm 3D locking and non locking mini plates and screw system. Comparison of ease of use, functional stability, operator's comfort were tabulated. RESULTS: A total of 27 fractures in 20 patients were treated. Each group contained ten patients. Fracture reduction was good in all the cases. At the follow up of 3 months, all fractures had healed, only one patient had a occlusal discrepancy. CONCLUSION: There was no difference in the stability in both the groups. Intra operatively locking group consumed more time in fixation as it demands precision in making a hole exactly in the centre of plate necessitating the use of drill guide. Clinical and radiographic healing was good in both the groups.

Orbital Infection Threatening Blindness Due to Carious Primary Molars: An Interesting Case Report.

INTRODUCTION: Distant spread of infection due to dental abscess in head and neck region is often reported in the literature. Orbital cellulitis or abscess although rare as a complication from decayed primary teeth in children is not an exception. The periapical infection from the maxillary primary molar spreads easily to the maxillary sinus first and followed by entry into the orbit through the orbital floor or through the ethmoidal sinuses. This if untreated may lead to orbital abscess, proptosis, progressive loss of vision, intracranial extension and even death. MATERIALS AND METHODS: A 10 year old boy presenting with severe pain, proptosis of right eyeball, ophthalmoplegia and blindness. CONCLUSION: Managed successfully with timely medical and surgical intervention with complete restoration of vision. This case presented emphasizes the primary teeth care necessary in children which if unchecked can cause fatal complications.

Complete mitochondrial genome of the wild eri silkworm, Samia canningi (Lepidoptera: Saturniidae).

The saturniid silkworm species of the genus Samia are potential silk producing insects. Thus, Samia canningi (Lepidoptera: Saturniidae) is a potential candidate to introduce for silk production. The complete mitochondrial genome of S. canningi was 15,384 bp long that contained 37 genes along with a control region. The arrangement of the PCGs was same as the majority of Lepidoptera, presenting the order, trnM/trnI/trnQ between nad2 and control region. Twelve of 13 PCGs started with ATN codons, but cox2 with GTG, which is often found in insects. Genes overlapped in a total of 29 bp, 221 bp of intergenic spacer sequences was found in seventeen regions and the longest 54 bp one was found between trnQ and nad2 as typical in Lepidoptera. In lrRNA, the 21-bp long, tandemly duplicated repeat was characteristically found (TAAAATTATTTATAATATAAA) between 13,663 and 13,706. AT rich region has the motif "ATAGA" and 18 bp poly T stretch, typically conserved in Lepidoptera.

Genetic analysis of Indian tasar silkmoth (Antheraea mylitta) populations.

Indian tasar silkmoth, Antheraea mylitta is an economically important wild silkmoth species distributed across India. A number of morphologically and ethologically well-defined ecotypes are known for this species that differ in their primary food plant specificity. Most of these ecotypes do not interbreed in nature, but are able to produce offspring under captive conditions. Microsatellite markers were developed for A. mylitta, and out of these, ten well-behaved microsatellite loci were used to analyze the population structure of different ecoraces. A total of 154 individual moths belonging to eight different ecoraces, were screened at each locus. Hierarchical analysis of population structure using Analysis of MOlecular VAriance (AMOVA) revealed significant structuring (FST = 0.154) and considerable inbreeding (FIS = 0.505). A significant isolation by distance was also observed. The number of possible population clusters was investigated using distance method, Bayesian algorithm and self organization maps (SOM). The first two methods revealed two distinct clusters, whereas the SOM showed the different ecoraces not to be clearly differentiated. These results suggest that although there is a large degree of phenotypic variation among the different ecoraces of A. mylitta, genetically they are not very different, and the phenotypic differences may largely be a result of their respective ecology.

Oversized submandibular gland sialolith: a report of two cases.

Sialolithiasis is a very common reason in causing obstructive salivary gland disease. Its incidence in males is more than females and children. They usually occur in submandibular ducts or gland and are 1 mm to less than 1 cm and rarely more than 1 cm. If they are more than 15 mm then, are termed as sialoliths of unusual size or giant sialoliths. The literatures have reports of up to 3.5 to 7 cm stones and are rare. The management includes removal of stone and re-channelizing the secretions in a functional gland or excision of gland in atrophied glands along with stone.