Smart Materials: Cementitious Mortars and PCM Mechanical and Thermal Characterization.

Climate change (CC) is predominantly connected to greenhouse gas (GHG) emissions from the construction sector. It is clear how it is necessary to rethink construction materials in order to reduce GHG emissions. Among the various strategies proposed, recent research has investigated the potential of smart materials. This study in particular aims to develop an innovative building component that combines high energy performance with reduced thickness and weight. For this reason, the potential of Phase Change Materials (PCM) in cement-based mixes is investigated, comparing the performance of a traditional mix with two innovative mixes made with the addition of 3% and 7% PCM. This work characterizes the new material, analyzing its mechanical and thermal performance, highlighting how the mix strength decreases as the PCM ratio increases; however, both mixes may be considered suitable for masonry structures and may be classified as M5 and M15. Furthermore, from the analysis of the thermal performance, it emerges that the mix presents good behavior in terms of insulating properties.

How reproducible is the acoustical characterization of porous media?

There is a considerable number of research publications on the characterization of porous media that is carried out in accordance with ISO 10534-2 (International Standards Organization, Geneva, Switzerland, 2001) and/or ISO 9053 (International Standards Organization, Geneva, Switzerland, 1991). According to the Web of ScienceTM (last accessed 22 September 2016) there were 339 publications in the Journal of the Acoustical Society of America alone which deal with the acoustics of porous media. However, the reproducibility of these characterization procedures is not well understood. This paper deals with the reproducibility of some standard characterization procedures for acoustic porous materials. The paper is an extension of the work published by Horoshenkov, Khan, Bécot, Jaouen, Sgard, Renault, Amirouche, Pompoli, Prodi, Bonfiglio, Pispola, Asdrubali, Hübelt, Atalla, Amédin, Lauriks, and Boeckx [J. Acoust. Soc. Am. 122(1), 345-353 (2007)]. In this paper, independent laboratory measurements were performed on the same material specimens so that the naturally occurring inhomogeneity in materials was controlled. It also presented the reproducibility data for the characteristic impedance, complex wavenumber, and for some related pore structure properties. This work can be helpful to better understand the tolerances of these material characterization procedures so improvements can be developed to reduce experimental errors and improve the reproducibility between laboratories.

Environmental impact of an Italian wine bottle: Carbon and water footprint assessment.

The food sector represents one of the major impacting sectors from an environmental point of view and, among all the products, wine emerges as one of the most studied by the literature. Single-issue approaches are commonly used, but a more comprehensive analysis is desirable, since a single indicator does not properly track the pressure on the environment. This paper presents a combined carbon and water footprint assessment, with a cradle to grave approach, for a protected designation of origin Italian red wine, and suggests a correlation among the two indicators across the life cycle phases. A total CF equal to 1.07±0.09kgCO2eq/bottle and a total WF equal to 580±30l/bottle were calculated for the studied product and a direct proportionality was found between the total CF and the sum of WFgrey(indirect) and WFblue.

The perceived quality of soundscape in three urban parks in Rome.

The present paper reports a socio-acoustic survey carried out in three large urban parks in Rome, selected on the basis of the outcome of a preliminary online survey. According to the experimental protocol applied in a previous study carried out in Milan and Naples, binaural recordings in 85 sites and interviews with 266 users of the three parks were performed only during the day in summertime. On the basis of selected acoustical descriptors, the sonic environment of the three parks was categorized and, thanks to statistical analysis, three clusters were identified. The results confirm that the sound environment in urban parks is often considered as "good" or "excellent" even if the sound pressure level is nearly always higher than the limits commonly used to define quiet areas. This is due to the influence of other factors, such as the presence of trees, natural features, and the tranquility; all of these components cannot be neglected in the assessment of the soundscape because they directly affect the psychological state of the person.

Reproducibility experiments on measuring acoustical properties of rigid-frame porous media (round-robin tests).

This paper reports the results of reproducibility experiments on the interlaboratory characterization of the acoustical properties of three types of consolidated porous media: granulated porous rubber, reticulated foam, and fiberglass. The measurements are conducted in several independent laboratories in Europe and North America. The studied acoustical characteristics are the surface complex acoustic impedance at normal incidence and plane wave absorption coefficient which are determined using the standard impedance tube method. The paper provides detailed procedures related to sample preparation and installation and it discusses the dispersion in the acoustical material property observed between individual material samples and laboratories. The importance of the boundary conditions, homogeneity of the porous material structure, and stability of the adopted signal processing method are highlighted.