Cycling Rate-Induced Spatially-Resolved Heterogeneities in Commercial Cylindrical Li-Ion Batteries.

Synchrotron high-energy X-ray diffraction computed tomography has been employed to investigate, for the first time, commercial cylindrical Li-ion batteries electrochemically cycled over the two cycling rates of C/2 and C/20. This technique yields maps of the crystalline components and chemical species as a cross-section of the cell with high spatiotemporal resolution (550 × 550 images with 20 × 20 × 3 µm3 voxel size in ca. 1 h). The recently developed Direct Least-Squares Reconstruction algorithm is used to overcome the well-known parallax problem and led to accurate lattice parameter maps for the device cathode. Chemical heterogeneities are revealed at both electrodes and are attributed to uneven Li and current distributions in the cells. It is shown that this technique has the potential to become an invaluable diagnostic tool for real-world commercial batteries and for their characterization under operating conditions, leading to unique insights into "real" battery degradation mechanisms as they occur.

High Throughput Synthesis and Screening of Oxygen Reduction Catalysts in the MTiO3 (M = Ca, Sr, Ba) Perovskite Phase Diagram.

A library of 66 perovskite BaxSryCazTiO3 (x + y + z = 1) samples (ca. three grams per sample) was made in ca. 14 h using a high-throughput continuous hydrothermal flow synthesis system. The as-synthesized samples were collected from the outlet of the process and then cleaned and freeze-dried before being evaluated individually as oxygen reduction catalysts using a rotating disk electrode testing technique. To establish any correlations between physical and electrochemical characterization data, the as-synthesized samples were investigated using analytical methods including BET surface area, powder X-ray diffraction (PXRD) and in selected cases, transmission electron microscopy (TEM). The aforementioned approach was validated as being able to quickly identify oxygen reduction catalysts from new libraries of electrocatalysts.

Tailoring the electrochemical activity of magnesium chromium oxide towards Mg batteries through control of size and crystal structure.

Chromium oxides with the spinel structure have been predicted to be promising high voltage cathode materials in magnesium batteries. Perennial challenges involving the mobility of Mg2+ and reaction kinetics can be circumvented by nano-sizing the materials in order to reduce diffusion distances, and by using elevated temperatures to overcome activation energy barriers. Herein, ordered 7 nm crystals of spinel-type MgCr2O4 were synthesized by a conventional batch hydrothermal method. In comparison, the relatively underexplored Continuous Hydrothermal Flow Synthesis (CHFS) method was used to make highly defective sub-5 nm MgCr2O4 crystals. When these materials were made into electrodes, they were shown to possess markedly different electrochemical behavior in a Mg2+ ionic liquid electrolyte, at moderate temperature (110 °C). The anodic activity of the ordered nanocrystals was attributed to surface reactions, most likely involving the electrolyte. In contrast, evidence was gathered regarding the reversible bulk deintercalation of Mg2+ from the nanocrystals made by CHFS. This work highlights the impact on electrochemical behavior of a precise control of size and crystal structure of MgCr2O4. It advances the understanding and design of new cathode materials for Mg-based batteries.

Mechanistic insights of Li+ diffusion within doped LiFePO4 from Muon Spectroscopy.

The Li+ ion diffusion characteristics of V- and Nb-doped LiFePO4 were examined with respect to undoped LiFePO4 using muon spectroscopy (µSR) as a local probe. As little difference in diffusion coefficient between the pure and doped samples was observed, offering DLi values in the range 1.8-2.3 × 10-10 cm2 s-1, this implied the improvement in electrochemical performance observed within doped LiFePO4 was not a result of increased local Li+ diffusion. This unexpected observation was made possible with the µSR technique, which can measure Li+ self-diffusion within LiFePO4, and therefore negated the effect of the LiFePO4 two-phase delithiation mechanism, which has previously prevented accurate Li+ diffusion comparison between the doped and undoped materials. Therefore, the authors suggest that µSR is an excellent technique for analysing materials on a local scale to elucidate the effects of dopants on solid-state diffusion behaviour.

Microwave-assisted synthesis and electrochemical evaluation of VO2 (B) nanostructures.

Understanding how intercalation materials change during electrochemical operation is paramount to optimizing their behaviour and function and in situ characterization methods allow us to observe these changes without sample destruction. Here we first report the improved intercalation properties of bronze phase vanadium dioxide VO2 (B) prepared by a microwave-assisted route which exhibits a larger electrochemical capacity (232 mAh g(-1)) compared with VO2 (B) prepared by a solvothermal route (197 mAh g(-1)). These electrochemical differences have also been followed using in situ X-ray absorption spectroscopy allowing us to follow oxidation state changes as they occur during battery operation.