Incorporation of Inclusion Complexes in the Dissolvable Microneedle Ocular Patch System for the Efficiency of Fluconazole in the Therapy of Fungal Keratitis.

Fluconazole (FNL) is one of the first-line treatments for fungal keratitis as it is an effective broad-spectrum antimicrobial commonly administered orally or topically. However, FNL has a very low water solubility, limiting its drug formulation, therapeutic application, and bioavailability through tissues. To overcome these limitations, this study aimed to develop FNL inclusion complexes (FNL-IC) with cyclodextrin (α-cyclodextrin, sulfobutylether-ß-cyclodextrin, and hydroxypropyl-γ cyclodextrin) and incorporate it into a dissolvable microneedle (DMN) system to improve solubility and drug penetration. FNL-IC was evaluated for saturation solubility, Fourier transform infrared spectroscopy, differential scanning calorimetry, in vitro release, minimum inhibitory concentration, minimum fungicidal concentration, and time-killing assay. DMN-FNL-IC was evaluated for mechanical and insertion properties, surface pH, moisture absorption ability, water vapor transmission, and drug content recovery. Moreover, ocular kinetic, ex vivo antimicrobial, in vivo antifungal, and chorioallantoic membrane (HET-CAM) assays were conducted to assess the overall performance of the formulation. Mechanical strength and insertion properties revealed that DMN-FNL-IC has great mechanical and insertion properties. The in vitro release of FNL-IC was significantly improved, exhibiting a 9-fold increase compared to pure FNL. The ex vivo antifungal activity showed significant inhibition of Candida albicans from 6.54 to 0.73 log cfu/mL or 100-0.94%. In vivo numbers of colonies of 0.87 ± 0.13 log cfu/mL (F2), 4.76 ± 0.26 log cfu/mL (FNL eye drops), 3.89 ± 0.24 log cfu/mL (FNL ointments), and 8.04 ± 0.58 log cfu/mL (control) showed the effectiveness of DMN preparations against other standard commercial preparations. The HET-CAM assay showed that DMN-FNL-IC (F2) did not show any vascular damage. Finally, a combination of FNL-IC and DMN was developed appropriately for ocular delivery of FNL, which was safe and increased the effectiveness of treatments for fungal keratitis.

Evaluating the Impact of Vitamin D3 on NF-κB and JAK/STAT Signaling Pathways in Drosophila melanogaster.

This study delved into the consequences of prolonged administration of vitamin D3 on innate immune systems, particularly NF-κB and JAK/STAT, in Drosophila melanogaster. The outcomes indicated that vitamin D3 treatment exhibited a notable capacity to improve the survival of adult flies with compromised immune functions, a condition induced by the loss of PGRP-LB, particularly when the flies were exposed to heat-killed Escherichia coli. The PGRP-LBΔ mutant line that was treated with heat-killed E. coli experienced reduced survival. Treatment of heat-killed E. coli-treated PGRP-LBΔ with vitamin D3 resulted in improved survival, and this phenotypic feature might be due to the downregulation of gene expression in the NF-κB and JAK/STAT pathways. However, a higher concentration of vitamin D3 was associated with decreased survival, potentially linked to intricate immunological responses. The research also underscored the influence of vitamin D3 on the expression of antioxidant genes, sod1 and sod2, indicating an augmented resistance to oxidative stress. Further, this study revealed the effect of vitamin D3 on the reproductive status of the autoinflammatory model, showing an increase in pupae and adult flies with a treatment of 10 mM vitamin D3, suggesting the potential benefits of vitamin D3 on the reproductive profile. Overall, this study provides preliminary insights into the complex interactions between vitamin D3, immune pathways, oxidative responses in the cell, and reproduction in Drosophila.

Validation of UV-Vis spectrophotometric and colorimetric methods to quantify methotrexate in plasma and rat skin tissue: Application to in vitro release, ex vivo and in vivo studies from dissolving microarray patch loaded pH-sensitive nanoparticle.

This research transformed MTX into smart nanoparticles that respond to the acidic conditions present in inflammation. These nanoparticles were then incorporated into a patch that dissolves over time, aiding their penetration. A method using UV-Vis spectrophotometry was validated to support the development of this new delivery system. This method was used to measure the quantity of MTX in the prepared patches in various scenarios: in laboratory solutions with pH 7.4 and pH 5.0, in skin tissue, and plasma. This validation was conducted in laboratory studies, tissue samples, and live subjects, adhering to established guidelines. The resulting calibration curve displayed a linear relationship (correlation coefficient 0.999) across these scenarios. The lowest quantity of MTX that could be accurately detected was 0.6 µg/mL in pH 7.4 solutions, 1.46 µg/mL in pH 5.0 solutions, 1.11 µg/mL in skin tissue, and 1.48 µg/mL in plasma. This validated method exhibited precision and accuracy and was not influenced by dilution effects. The method was effectively used to measure MTX levels in the developed patch in controlled lab settings and biological systems (in vitro, ex vivo, and in vivo). This showed consistent drug content in the patches, controlled release patterns over 24 h, and pharmacokinetic profiles spanning 48 h. However, additional analytical approaches were necessary for quantifying MTX in studies focused on the drug's effects on the body's functions.

Development of pH-Sensitive Nanoparticle Incorporated into Dissolving Microarray Patch for Selective Delivery of Methotrexate.

PURPOSE: Rheumatoid arthritis (RA) is a systemic autoimmune disease that attacks human joints. Methotrexate (MTX), as one the most effective medications to treat RA, has limitations when administered either orally or by injection. To overcome this limitation, we formulated MTX through a smart nanoparticle (SNP) combined with dissolving microarray patch (DMAP) to achieve selective-targeted delivery of RA. METHODS: SNP was made using the combination of polyethylene glycol (PEG) and polycaprolactone (PCL) polymers, while DMAP was made using the combination of hyaluronic acid and polyvinylpyrrolidone K-30. SNP-DMAP was then evaluated for its mechanical and chemical characteristics, ex vivo permeation test, in vivo pharmacokinetic study, hemolysis, and hen's egg test-chorioallantoic membrane (HET-CAM) test. RESULT: The results showed that the characteristics of the SNP-DMAP-MTX formulas meet the requirements for transdermal delivery, with the particle size of 189.09 ±12.30 nm and absorption efficiency of 65.40 ± 5.0%. The hemolysis and HET-CAM testing indicate that this formula was non-toxic and non-irritating. Ex vivo permeation shows a concentration of 51.50 ± 3.20 µg/mL of SNP-DMAP-MTX in PBS pH 5.0. The pharmacokinetic profile of SNP-DMAP-MTX showed selectivity and sustained release compared with oral and DMAP-MTX with values of t1/2 (4.88 ± 0 h), Tmax (8 ± 0 h), Cmax (0.50 ± 0.04 µg/mL), AUC (3.15 ± 0.54 µg/mL.h), and mean residence time (MRT) (9.13 ± 0 h). CONCLUSION: The developed SNP-DMAP-MTX has been proven to deliver MTX transdermal and selectively at the RA site, potentially avoiding conventional MTX side effects and enhancing the effectiveness of RA therapy.

Dual delivery systems combining nanocrystals and dissolving microneedles for improved local vaginal delivery of fluconazole.

Fluconazole (FLZ) has been widely used in the treatment of infection caused by Candida albicans, including the treatment of vulvovaginal candidiasis (VVC). However, when delivered orally, FLZ faces numerous limitations due to its poor solubility and undergoes the symptoms of first-pass metabolism. In this study, we developed the combinatorial approach of nanocrystals (NCs) and dissolving microneedles (DMNs) for effective local vaginal delivery of FLZ. The formulation containing 1.0% w/v PVA as stabilizer with 12 h of milling time process was found to be an optimal combination to fabricate FLZ as NCs (FLZ-NCs) with optimum size particle and PDI value (less than 0.25). Furthermore, the in vitro release study also showed a superior percentage of FLZ release up to 89.51 ± 7.52%. In combination with the DMNs, the FLZ recovery was 96.45 ± 2.38% with the insertion percentage in average of 76.14 ± 2.28% and height decreased percentage was only 7.53 ± 0.56%. Moreover, the ex vivo investigation and anti-candidiasis activity of DMNs-FLZ-NCs in vaginal model showed better results compared to other conventional preparations, such as film patch and hydrogel containing FLZ.

Development of Thermoresponsive Hydrogels with Mucoadhesion Properties Loaded with Metronidazole Gel-Flakes for Improved Bacterial Vaginosis Treatment.

Bacterial vaginosis is an infectious disease that has significantly affected women's health. Metronidazole has been widely used as a drug for treating bacterial vaginosis. Nevertheless, the currently available therapies have been found to be inefficient and inconvenient. Here, we developed the combination approach of gel flake and thermoresponsive hydrogel systems. The gel flakes were prepared using gellan gum and chitosan, showing that the incorporation of metronidazole was able to provide a sustained release pattern for 24 h with an entrapment efficiency of >90%. Moreover, the gel flakes were incorporated into Pluronics-based thermoresponsive hydrogel using the combination of Pluronic F127 and F68. The hydrogels were found to exhibit the desired thermoresponsive properties, showing sol-gel transition at vaginal temperature. Following the addition of sodium alginate as a mucoadhesive agent, the hydrogel was retained in the vaginal tissue for more than 8 h, with more than 5 mg of metronidazole retained in the ex vivo evaluation. Finally, using the bacterial vaginosis infection model in rats, this approach could decrease the viability of Escherichia coli and Staphylococcus aureus with reduction percentages of more than 95% after 3 days of treatment, with the healing ability similar to normal vaginal tissue. In conclusion, this study offers an effective approach for the treatment of bacterial vaginosis.

Solid lipid nanoparticles cyclodextrin-decorated incorporated into gellan gum-based dry floating in situ delivery systems for controlled release of bioactive compounds of safflower (Carthamus tinctorius. L): A proof of concept study in biorelevant media.

Safflower (Carthamus tinctorius L.) has been explored as a source of natural antioxidant. However, quercetin 7-O-beta-D-glucopyranoside and luteolin 7-O-beta-D-glucopyranoside, as its bioactive compounds, possessed poor aqueous solubility, limiting its efficacy. Here, we developed solid lipid nanoparticles (SLNs) decorated with hydroxypropyl beta-cyclodextrin (HPßCD) incorporated into dry floating gel in situ systems to control the release of both compounds. Using Geleol® as a lipid matrix, SLNs were <200 nm in size with >80 % of encapsulation efficiency. Importantly, following the decoration using HPßCD, the stability of SLNs in gastric environment was significantly improved. Furthermore, the solubility of both compounds was also enhanced. The incorporation of SLNs into gellan gum-based floating gel in situ provided desired flow and floating properties, with <30 s gelation time. The floating gel in situ system could control the release of bioactive compounds in FaSSGF (Fasted-State Simulated Gastric Fluid). Furthermore, to assess the effect of food intake on release behavior, we found that the formulation could show a sustained release pattern in FeSSGF (Fed-State Simulated Gastric Fluid) for 24 h after being released in FaSGGF for 2 h. This indicated that this combination approach could be a promising oral delivery for bioactive compounds in safflower.

Development of Solid Lipid Nanoparticle-Loaded Polymeric Hydrogels Containing Antioxidant and Photoprotective Bioactive Compounds of Safflower (Carthamus tinctorius L.) for Improved Skin Delivery.

Safflower (Carthamus tinctorius L.) is a potent natural antioxidant because of active compounds such as quercetin (QU) and luteolin (LU). These components prevent damage to the skin caused by free radicals from UV rays. However, due to the poor solubility and transdermal permeation, the effectiveness of the compounds in showing their activity was limited. In this study, we develop solid lipid nanoparticle (SLN)-based hydrogel formulations to enhance the solubility and penetration of two bioactive compounds found in safflower petals extract (SPE). The hot emulsification-ultrasonication method was used to produce SLNs, and to obtain high antioxidant activity, 100% v/v ethanol was used in the extraction procedure. The results showed that this approach could encapsulate >80% of both QU and LU. Moreover, Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD) spectra indicated that most of the QU and LU were trapped in a lipid matrix and dispersed homogeneously at the molecular level, increasing the solubility. Additionally, SLN-hydrogel composites are able to release two lipophilic bioactive compounds for 24 h, which also demonstrated increased skin retention and penetrability of the QU and LU up to 19-fold. In vitro blood biocompatibility showed that no hemolytic toxicity was observed below 500 µg/mL. Accordingly, the formulation was considered safe for use. Sun protective factor (SPF) test shows a value above 15, showing an excellent promising application as the photoprotective agent to prevent symptoms associated with photoinduced skin aging.

Glucose-Responsive Microparticle-Loaded Dissolving Microneedles for Selective Delivery of Metformin: A Proof-of-Concept Study.

Diabetes mellitus (DM) is a metabolic disorder that is one of the most common health problems in the world, primarily type 2 DM (T2DM). Metformin (MTF), as the first-line treatment of DMT2, is effective in lowering glucose levels, but its oral administration causes problems, including gastrointestinal side effects, low bioavailability, and the risk of hypoglycemia. In this study, we formulated MTF into microparticles incorporating a glucose-responsive polymer (MP-MTF-GR), which could potentially increase the bioavailability and extend and control the release of MTF according to glucose levels. This system was delivered by dissolving microneedles (MP-MTF-GR-DMN), applied through the skin, thereby preventing gastrointestinal side effects of orally administered MTF. MP-MTF-GR was formulated using various concentrations of gelatin as a polymer combined with phenylboronic acid (PBA) as a glucose-responsive material. MP-MTF-GR was encapsulated in DMN using polyvinyl pyrrolidone (PVP) and polyvinyl alcohol (PVA) as DMN polymers. The physicochemical evaluation of MP-MTF-GR showed that MTF could be completely entrapped in MP with the percentage of MTF trapped increasing with increasing gelatin concentration without changing the chemical structure of MTF and producing stable MP. In addition, the results of the physicochemical evaluation of MP-MTF-GR-DMN showed that DMN had adequate mechanical strength properties and penetration ability and was stable to environmental changes. The results of the in vitro release and ex vivo permeation study on media with various concentrations of glucose showed that the release and permeation of MTF from the formula increased with increasing glucose levels in the media. The MP-MTF-GR-DMN formula successfully delivered MTF through the skin at 11.30 ± 0.29, 23.31 ± 1.64, 36.12 ± 3.77, and 53.09 ± 3.01 µg from PBS, PBS + glucose 1%, PBS + glucose 2%, and PBS + glucose 4%, respectively, at 24 h, which indicates glucose-responsive permeation and release behavior. The formula developed was also proven to be nontoxic based on hemolysis tests. Importantly, the in vivo study on the rat model showed that this combination approach could provide a better glucose reduction compared to other routes, reducing the blood glucose level to normal levels after 3 h and maintaining this level for 8 h. Furthermore, this approach did not change the skin moisture of the rats. This MP-MTF-GR-DMN is a promising alternative to MTF delivery to overcome MTF problems and increase the effectiveness of T2DM therapy.

Hydrogel forming microneedle-mediated transdermal delivery of sildenafil citrate from polyethylene glycol reservoir: An ex vivo proof of concept study.

Erectile dysfunction (ED) is a disorder that often occurs in men worldwide. One of the drugs used as the first-line therapy for erectile dysfunction is sildenafil citrate (SC). Unfortunately, SC was commonly found in oral, injection, and transdermal dosage forms with some limitations, mainly related to low oral bioavailability caused by the occurrence of first-pass metabolism in the liver, and poor patient comfort and compliance. Therefore, it was essential to develop dosage forms to overcome these limitations. We developed hydrogel-forming microneedles (HFM) that can facilitate transdermal delivery of SC by penetrating the stratum corneum. HFM was made using polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) as polymers and several variations of tartaric acid as crosslinking agents. The evaluation of swelling properties, mechanical resistance, and penetration ability showed that the HFM produced had good insertion properties and swelling capabilities ranging from 300% to 700%. This HFM was designed to be integrated with a polyethylene glycol (PEG) reservoir prepared using several types of PEG with different molecular weights. The ex vivo permeation study showed that up to 80% of SC (equivalent to 20.2 ± 0.29 mg/mL) was delivered transdermally from this combined dosage form. For the first time, SC has been successfully developed into an HFM that was integrated with a PEG reservoir which was non-irritating, safe, and painless. It also had promising results for increasing the effectiveness of ED therapy.

Improved transdermal delivery of valsartan using combinatorial approach of polymeric transdermal hydrogels and solid microneedles: an ex vivo proof of concept investigation.

Valsartan (VAL) is used as a first-line agent to treat hypertension. However, VAL exhibits poor absorption and low bioavailability when administrated orally. To overcome these issues, VAL transdermal gel was developed in this study, where Carbopol was used as the gel matrices. Additionally, solid microneedles (Dermaroller®) with various needle lengths were combined with transdermal gel to improve its permeation across the stratum corneum as a skin barrier. Developed formulations were further evaluated for various parameters, including pH, viscosity, spreadability, extrudability, gel strength, drug content, ex vivo permeation, in vitro release, occlusivity, and hemolysis. The results showed that all formulations exhibited desired physical characteristics without any potential to cause toxicity. Moreover, this approach showed that using microneedles could significantly enhance the permeation of VAL up to 3 folds compared to untreated skin. The use of microneedles 1.5 mm was found to be the optimum combination to improve VA permeation without affecting skin integrity. As much as 1.69 ± 0.004 mg of VAL permeated after 8 h. Finally, it could be concluded that this work had successfully developed a new approach for VALS drug delivery and could potentially show a significant impact on the treatment of hypertension. Further in vivo work should be considered.

Enhancement in Site-Specific Delivery of Chloramphenicol Using Bacterially Sensitive Microparticle Loaded Into Dissolving Microneedle: Potential For Enhanced Effectiveness Treatment of Cellulitis.

One of the biggest challenges in infectious disease treatment is the existence of bacterial infections in underskin wound tissue, such as cellulitis. Compared to other treatments, it is harder for antibacterial drugs to penetrate the physical barrier on the affected skin with a nonspecific target, making conventional therapy for cellulitis infection more difficult and considered. In this novel research, we pioneer a combined strategy of dissolving microneedles (MNs) and bacteria-sensitive microparticles (MPs) for enhanced penetration and targeted delivery of chloramphenicol (CHL) to the infection site specifically. The polycaprolactone polymer was used to make MPs because of its sensitivity to bacterial enzyme stimuli. The best microparticle formulation was discovered and optimized using the Design-Expert application. Furthermore, this study evaluated the antibacterial activity of MPs in vitro and in vivo on the mutant Drosophila larval infection model. This strategy shows improvement in the antibacterial activity of MPs and higher retention duration compared to conventional cream formulation, and the inclusion of these MPs into dissolving MNs was able to greatly improve the dermatokinetic characteristics of CHL in ex vivo evaluation. Importantly, the antimicrobial efficacy in an ex vivo infection model demonstrated that, following the use of this strategy, bacterial bioburdens decreased by up to 99.99% after 24 h. The findings offered a proof of concept for the enhancement of CHL dermatokinetic profiles and antimicrobial activities after its preparation into bacteria-sensitive MPs and distribution by MNs. Future research should investigate in vivo effectiveness in an appropriate animal model.

Molecular Docking of Phytochemical Compounds of Momordica charantia as Potential Inhibitors against SARS-CoV-2.

BACKGROUND: Coronavirus disease 2019 (COVID-19) has been recently declared as a global public health emergency, where the infection is caused by SARS-CoV-2. Nowadays, there is no specific treatment to cure this infection. The main protease (Mpro) of SARS-CoV-2 and SARS spike glycoprotein- human ACE2 complex have been recognized as suitable targets for treatment, including COVID-19 vaccines. OBJECTIVE: In our current study, we identified the potential of Momordica charantia as a prospective alternative and a choice in dietary food during a pandemic. MATERIALS AND METHODS: A total of 16 bioactive compounds of Momordica charantia were screened for activity against 6LU7 and 6CS2 with AutoDockVina. RESULTS: We found that momordicoside B showed the lowest binding energy compared to other compounds. In addition, kuguaglycoside A and cucurbitadienol showed better profiles for drug-like properties based on Lipinski's rule of five. CONCLUSION: Our result indicates that these molecules can be further explored as promising candidates against SARS-CoV-2 or Momordica charantia can be used as one of the best food alternatives to be consumed during the pandemic.

Validation of spectrophotometric method to quantify cabotegravir in simulated vaginal fluid and porcine vaginal tissue in ex vivo permeation and retention studies from thermosensitive and mucoadhesive gels.

Cabotegravir (CAB) is an antiretroviral therapy (ARV) used for Human Immunodeficiency Virus (HIV) treatment. CAB has low solubility, which affects its bioavailability in oral therapy. Moreover, the injection form of CAB has difficulty in the administration process. Therefore, it is essential to develop a new drug delivery system for CAB. Vaginal drug delivery system offers many advantages such as a large surface area, increased drug bioavailability, and improved drug delivery. CAB was developed in thermosensitive and mucoadhesive vaginal gel preparations that provided optimal distribution in the vaginal mucosa. To support the process of formulation development, in this study, UV-visible spectrophotometry method was validated in methanol, simulated vaginal fluid (SVF) and vaginal tissue to quantify the amount of CAB in the gel preparations, in vitro, and ex vivo studies, respectively. The developed analytical method was subsequently validated according to ICH guidelines. The calibration curves in these matrices were found to be linear with correlation coefficient values (R2) ≥ 0.998. The LLOQ values in methanol, SVF and vaginal tissue were 2.15 µg/mL, 2.22 µg/mL, and 5.13 µg/mL, respectively. The developed method was found to be accurate and precise without being affected by dilution integrity. These methods were successfully applied to quantify the amount of CAB in gel preparations, in vitro, and ex vivo studies, showing uniformity of drug content and controlled release manner in the permeation profile for 24 h for both thermosensitive and mucoadhesive vaginal gels. Further analytical method is required to be developed for the quantification of CAB in in vivo studies.

Development of thermosensitive and mucoadhesive gels of cabotegravir for enhanced permeation and retention profiles in vaginal tissue: A proof of concept study.

As an effective anti-HIV drug, cabotegravir (CAB) is currently administered via oral and injection routes, leading to several drawbacks, such as poor oral bioavailability and problems in the injection application process, as well as low drug concentration in vaginal tissue of woman patients. To overcome these issues, for the first time, we formulated CAB into three types of vaginal gels, considering the benefits of vaginal tissue as a delivery route. Thermosensitive gel, mucoadhesive gel, and the combination of these gels were developed as suitable carriers for CAB. Pluronics®, hydroxy propyl methyl cellulose (HPMC), Carbomer and poly(ethylene glycol) (PEG) 400 were used as thermosensitive, mucoadhesive and permeation enhancer agents, respectively. The gels were evaluated for their thermosensitive and mucoadhesive properties, as well as their pH values, viscosities, gel erosions, drug content recovery, in vitro drug release, ex vivo permeation, ex vivo retention, hemolytic activities, Lactobacillus inhibition activities and in vivo irritation properties. The results showed that all formulations showed desired characteristics for vaginal administration. Importantly, all formulations did not show hemolytic activities and inhibitions to Lactobacillus as normal bacteria in the vagina. Furthermore, no irritation in the vaginal tissues of the rats was observed by histopathological studies. Considering the thermosensitive and mucoadhesive properties, the combination of Pluronic® F127, Pluronic F68, and HPMC in thermosensitive-mucoadhesive vaginal gels was selected as the optimum dosage form for CAB as this formulation was able to provide ease administration due to its liquid form at room temperature. The use of PEG in this formulation was able to increase the penetrability of CAB through vaginal tissue with 0.61 ± 0.05 mg and 17.28 ± 0.95 mg of CAB being able to penetrate and localize in the vagina, respectively. Essentially, the optimum formulation was retained in the vaginal mucosa for>8 h. To conclude, further extensive in vivo studies should now be conducted to evaluate the efficacy of this approach.

Molecular modeling and phenoloxidase inhibitory activity of arbutin and arbutin undecylenic acid ester.

Excessive melanin formation has been linked to various skin disorders such as hyperpigmentation and skin cancer. Tyrosinase is the most prominent target for inhibitors of melanin production. In this study, we investigated whether arbutin and its prodrug, arbutin undecylenic acid ester, might inhibit phenoloxidase (PO), a tyrosinase-like enzyme. Molecular docking simulation results suggested that arbutin and arbutin undecylenic acid ester can bind to the substrate-binding pocket of PO. Arbutin undecylenic acid ester with an IC50 6.34 mM was effective to inhibit PO compared to arbutin (IC50 29.42 mM). In addition, arbutin undecylenic acid ester showed low cytotoxicity in Drosophila S2 cells and the compound inhibited the melanization reaction. Therefore, the results of this study have demonstrated that arbutin undecylenic acid ester as a potential inhibitor of PO. We successfully designed a new platform utilizing Drosophila melanogaster and Bombyx mori as animal models propounding fast, cheap, and high effectiveness in method to screen tyrosinase inhibitors.

Molecular and Functional Analysis of Pore-Forming Toxin Monalysin From Entomopathogenic Bacterium Pseudomonas entomophila.

Pseudomonas entomophila is a highly pathogenic bacterium that infects insects. It is also used as a suitable model pathogen to analyze Drosophila's innate immunity. P. entomophila's virulence is largely derived from Monalysin, a ß-barrel pore-forming toxin that damages Drosophila tissues, inducing necrotic cell death. Here we report the first and efficient purification of endogenous Monalysin and its characterization. Monalysin is successfully purified as a pro-form, and trypsin treatment results in a cleaved mature form of purified Monalysin which kills Drosophila cell lines and adult flies. Electrophysiological measurement of Monalysin in a lipid membrane with an on-chip device confirms that Monalysin forms a pore, in a cleavage-dependent manner. This analysis also provides a pore-size estimate of Monalysin using current amplitude for a single pore and suggests lipid preferences for the insertion. Atomic Force Microscope (AFM) analysis displays its structure in a solution and shows that active-Monalysin is stable and composed of an 8-mer complex; this observation is consistent with mass spectrometry data. AFM analysis also shows the 8-mer structure of active-Monalysin in a lipid bilayer, and real-time imaging demonstrates the moment at which Monalysin is inserted into the lipid membrane. These results collectively suggest that endogenous Monalysin is indeed a pore-forming toxin composed of a rigid structure before pore formation in the lipid membrane. The endogenous Monalysin characterized in this study could be a desirable tool for analyzing host defense mechanisms against entomopathogenic bacteria producing damage-inducing toxins.

Neurodegenerative disorders and sterile inflammation: lessons from a Drosophila model.

Central nervous system (CNS)-related disorders, including neurodegenerative diseases, are common but difficult to treat. As effective medical interventions are limited, those diseases will likely continue adversely affecting people's health. There is evidence that the hyperactivation of innate immunity is a hallmark of most neurodegenerative diseases, including Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis and polyglutamine diseases. In mammalian and fly CNS, the presence of noninfectious ligands, including danger-associated molecular patterns, is recognized by (micro)glial cells, inducing the expression of proinflammatory cytokines. Such inflammation may contribute to the onset and progression of neurodegenerative states. Studies using fruit flies have shed light on the types of signals, receptors and cells responsible for inducing the inflammation that leads to neurodegeneration. Researchers are using fly models to assess the mechanisms of sterile inflammation in the brain and its link to progressive neurodegeneration. Given the similarity of its physiological system and biochemical function to those of mammals, especially in activating and regulating innate immune signalling, Drosophila can be a versatile model system for studying the mechanisms and biological significance of sterile inflammatory responses in the pathogenesis of neurodegenerative diseases. Such knowledge would greatly facilitate the quest for a novel effective treatment for neurodegenerative diseases.

Sterile induction of innate immunity in Drosophila melanogaster.

In the past decades, much has been learned about the protective signatures of innate immune responses during the course of infections. However, it is now evident that induction of immune effectors also commonly occurs in the absence of pathogenic cues. Such an event, termed sterile inflammation, has been linked to several debilitating acute and chronic host conditions. Using Drosophila melanogaster as a simple yet powerful model organism, identification of diverse sets of damage-associated molecular patterns and their corresponding surface and/or inside pattern recognition receptors on the cells, as well as elucidation of their significant roles in the host physiology and pathological conditions related to sterile inflammation, have been continuously reported. In addition, revelation of non-pathogenic molecular triggers leading to the orchestration of unnecessary activation of inflammatory responses has been a subject of interest. Here, we review decades of efforts to elucidate the molecular mechanisms responsible in the emergence of sterile inflammation. The characterization of the respective contributing factors, including recent demonstration of pinching as a novel sterile-stimuli in Drosophila, is also discussed.