Combining active phase and support optimization in MnO2-Au nanoflowers: Enabling high activities towards green oxidations.

Among the several classes of chemical reactions, the green oxidation of organic compounds has emerged as an important topic in nanocatalysis. Nonetheless, examples of truly green oxidations remain scarce due to the low activity and selectivity of reported catalysts. In this paper, we present an approach based on the optimization of both the support material and the active phase to achieve superior catalytic performances towards green oxidations. Specifically, our catalysts consisted of ultrasmall Au NPs deposited onto MnO2 nanoflowers. They displayed hierarchical morphology, large specific surface areas, ultrasmall and uniform Au NPs sizes, no agglomeration, strong metal-support interactions, oxygen vacancies, and Auδ+ species at their surface. These features led to improved performances towards the green oxidations of CO, benzene, toluene, o-xylene, glucose, and fructose relative to the pristine MnO2 nanoflowers, commercial MnO2 decorated with Au NPs, and other reported catalysts. We believe that the catalytic activities, stabilities, and mild/green reaction conditions described herein for both gas and liquid phase oxidations due to the optimization of both the support and active phase may inspire the development of novel catalytic systems for a wealth of sustainable transformations.

One-Pot Synthesis of Mesoporous Ni-Ti-Al Ternary Oxides: Highly Active and Selective Catalysts for Steam Reforming of Ethanol.

One-pot synthesis of nanostructured ternary oxides of Ni, Al, and Ti was designed and performed via evaporation induced self-assembly (EISA). For the purpose of comparison, analogous oxides were also prepared by the impregnation method. The resulting materials were applied in two catalytic reactions: steam reforming of ethanol (SRE) for H2 production (subjected to prior activation with H2) and ethanol dehydration (ED; used without prior activation), to in situ analyze carbon accumulation by ethylene depletion when ethanol interacts with acidic sites present on the support. Modification of Ni-Al mixed oxides with titania was shown to have several benefits. CO2, NH3, and propylamine sorption data indicate a decrease in the strength of acidic and basic sites after addition of titania, which in turn slowed down the carbon accumulation during the ED reaction. These changes in interactions between ethanol and byproducts with the support led to different reaction pathways in SRE, indicating that the catalysts obtained by EISA with titania addition showed higher ethylene selectivity and CO2/CO ratios. The opposite was observed for the impregnated catalysts, which were less coke-stable during ED reactions and showed no ethylene selectivity in SRE. Carbon formed during ED reactions was shown to be thermodynamically less favorable and easier to decompose in the presence of titania. All catalysts studied displayed similar and high selectivities (∼80%) and yields (∼5.3 molH2/molethanol) toward H2, which place them among the most active and selective catalysts for SRE. These results indicate the importance of tailoring the support surface acidity to achieve high reforming performance and higher selectivity toward SRE, one of the key processes to produce cleaner and efficient fuels. For an efficient reforming process, the yield of byproducts is low but still they affect the catalyst stability in the long-run, thus this work may impact future studies toward development of near-zero coke catalysts.

Catalytic Properties of AgPt Nanoshells as a Function of Size: Larger Outer Diameters Lead to Improved Performances.

We report herein a systematic investigation on the effect of the size of silver (Ag) nanoparticles employed as starting materials over the morphological features and catalytic performances of AgPt nanoshells produced by a combination of galvanic replacement between Ag and PtCl6(2-) and PtCl6(2-) reduction by hydroquinone. More specifically, we focused on Ag nanoparticles of four different sizes as starting materials, and found that the outer diameter, shell thickness, and the number of Pt surface atoms of the produced nanoshells increased with the size of the starting Ag nanoparticles. The produced AgPt nanoshells were supported into SiO2, and the catalytic performances of the AgPt/SiO2 nanocatalysts toward the gas-phase oxidation of benzene, toluene, and o-xylene (BTX oxidation) followed the order: AgPt 163 nm/SiO2 > AgPt 133 nm/SiO2 > AgPt 105 nm/SiO2 > AgPt 95 nm/SiO2. Interestingly, bigger AgPt nanoshell sizes lead to better catalytic performances in contrast to the intuitive prediction that particles having larger outer diameters tend to present poorer catalytic activities due to their lower surface to volume ratios as compared to smaller particles. This is in agreement with the H2 chemisorption results, and can be assigned to the increase in the Pt surface area with size due to the presence of smaller NPs islands at the surface of the nanoshells having larger outer diameters. This result indicates that, in addition to the overall diameters, the optimization of the surface morphology may play an important role over the optimization of catalytic activities in metal-based nanocatalysts, which can be even more pronounced that the size effect. Our data demonstrate that the control over surface morphology play a very important role relative to the effect of size to the optimization of catalytic performances in catalysts based on noble-metal nanostructures.

Controlling Size, Morphology, and Surface Composition of AgAu Nanodendrites in 15 s for Improved Environmental Catalysis under Low Metal Loadings.

In this work, a simple but powerful method for controlling the size and surface morphology of AgAu nanodendrites is presented. Control of the number of Ag nanoparticle seeds is found to provide a fast and effective route by which to manipulate the size and morphology of nanoparticles produced via a combined galvanic replacement and reduction reaction. A lower number of Ag nanoparticle seeds leads to larger nanodendrites with the particles' outer diameter being tunable in the range of 45-148 nm. The size and surface morphology of the nanodendrites was found to directly affect their catalytic activity. Specifically, we report on the activity of these AgAu nanodendrites in catalyzing the gas-phase oxidation of benzene, toluene and o-xylene, which is an important reaction for the removal of these toxic compounds from fuels and for environmental remediation. All produced nanodendrite particles were found to be catalytically active, even at low temperatures and low metal loadings. Surprisingly, the largest nanodendrites provided the greatest percent conversion efficiencies.

Influence of the supramolecular structure and physicochemical properties of cellulose on its dissolution in a lithium chloride/N,N-dimethylacetamide solvent system.

The present work deals with the effects of structural variables of celluloses on their dissolution in the solvent system LiCl/N,N-dimethylacetamide, LiCl/DMAc. Celluloses from fast growing sources (sisal and linters), as well as microcrystalline cellulose (avicel PH-101) were studied. The following structural variables were investigated: index of crystallinity, I(c); crystallite size; polymer porosity; and degree of polymerization determined by viscosity, DPv. Mercerization of fibrous celluloses was found to decrease DPv, I(c), the specific surface area, and the ratio pore volume/radius. The relevance of the structural properties of cellulose to its dissolution is discussed. Rate constants and activation parameters of cellulose decrystallization, prior to its solubilization, have been determined under nonisothermal conditions. The kinetic parameters calculated showed that dissolution is accompanied with small, negative enthalpy and a large, negative entropy of activation.