Bio-efficacy of Mangifera leaf extracts on mortality of Aedes aegypti and inhibition of egg hatching.

Background and Aim: To develop an environmentally friendly alternative to mosquito larvicides for vegetables, leaf extracts of Mangifera laurina, Mangifera casturi, Mangifera indica, Mangifera odorata, Mangifera caesia, and Mangifera foetida were prepared. This study aimed to determine the biological efficacy of several Mangifera leaf extracts on the mortality of Aedes aegypti mosquito and the inhibition of egg hatching. Materials and Methods: Extraction was performed in an organic solvent (methanol) using a Soxhlet extractor. The larvicidal potential of six leaves of Mangifera essential oil was evaluated against the third instar larvae of A. aegypti at concentrations of 1500, 2000, 3000, and 5000 ppm using the World Health Organization protocol. After Probit analysis, the 48 h LC50 and LC90 values of the essential oils were determined. The inhibitory effect on egg hatching was also tested at 160, 320, 480, and 640 ppm. Results: The extraction of essential oils from several Mangifera species had excellent larvicidal activity and inhibitory activity against A. aegypti egg hatching. The LC50/LC90 values were: M. casturi, 241/1964 ppm; M. laurina, 2739/4035 ppm; and M. caesia, 1831/2618 ppm. The inhibitory effect on hatching was 78% for M. foetida, 70% for M. caesia, and 59% for M. casturi. Conclusion: The test results indicate the potential of some Mangifera species for use as larvicides and inhibitors of egg hatching; thus, they have the potential to control A. aegypti in the early stages of development.

Targeting of Cancer Cells Using Quantum Dot-Polypeptide Hybrid Assemblies that Function as Molecular Imaging Agents and Carrier Systems.

We report a highly tunable quantum dot (QD)-polypeptide hybrid assembly system with potential uses for both molecular imaging and delivery of biomolecular cargo to cancer cells. In this work, we demonstrate the tunability of the assembly system, its application for imaging cancer cells, and its ability to carry a biomolecule. The assemblies are formed through the self-assembly of carboxyl-functionalized QDs and poly(diethylene glycol-L-lysine)-poly(L-lysine) (PEGLL-PLL) diblock copolypeptide molecules, and they are modified with peptide ligands containing a cyclic arginine-glycine-aspartate [c(RGD)] motif that has affinity for αvß3 and αvß5 integrins overexpressed on the tumor vasculature. To illustrate the tunability of the QD-polypeptide assembly system, we show that binding to U87MG glioblastoma cells can be modulated and optimized by changing either the conditions under which the assemblies are formed or the relative lengths of the PEGLL and PLL blocks in the PEGLL-PLL molecules. The optimized c(RGD)-modified assemblies bind integrin receptors on U87MG cells and are endocytosed, as demonstrated by flow cytometry and live-cell imaging. Binding specificity is confirmed by competition with an excess of free c(RGD) peptide. Finally, we show that the QD-polypeptide assemblies can be loaded with fluorescently labeled ovalbumin, as a proof-of-concept for their potential use in biomolecule delivery.

Adsorbed alpha-helical diblock copolypeptides: molecular organization, structural properties, and interactions.

In this work, we have developed 11-mercaptoundecanoic acid (MUA)-polypeptide "bilayer" systems by adsorbing poly(diethylene glycol-l-lysine)-poly(l-lysine) (PEGLL-PLL) diblock copolypeptide molecules of various architectures onto MUA-functionalized gold substrates. An objective of our present work is to use the PEGLL-PLL/MUA bilayer as a model system for studying the interfacial phenomena that occur when PEGLL-PLL molecules interact with carboxylic acid (COOH) moieties of nanoparticle ligands. Specifically, we have elucidated the nature of the interactions between the PEGLL-PLL and COOH moieties as well as the resulting polypeptide conformation and organization, using a combination of surface techniques-grazing-incidence IR spectroscopy, ellipsometry, and contact angle. We have also thoroughly characterized other film properties such as the packing and graft density of the polypeptide molecules as a function of the PEGLL-PLL architecture. From the IR data, the adsorption process occurs primarily by means of electrostatic interaction between the protonated PLL residues (pKa approximately 10.6) and carboxylate moieties of the MUA self-assembled monolayer (SAM) (pKa approximately 6) that is enhanced by H-bonding. The PLL block is thought to adopt a random-coil (extended) conformation, while the PEGLL block that is not interacting with the MUA molecules is found to adopt an alpha-helical conformation with an average tilt angle of -60 degrees. The PEGLL-PLL molecules have also been deduced to form a heterogeneous film and adopt liquidlike/disordered packing on the surface. The average contact angle of the MUA-polypeptide bilayer systems is -40 degrees, which implies that the diethylene glycol (EG2) side chains of the PEGLL residues may be oriented somewhat toward the surface normal. From ellipsometry measurements, it is found that PEGLLx-PLLy molecules with a longer alpha-helical block are associated with a lower graft density on the MUA surface compared to those with a shorter alpha-helical block. This observation may be attributed to the greater repulsion-steric and H-bonding effects-that is imposed by the EG2 side chains found on and projected area occupied by the longer PEGLL block. The bilayer systems have been found to be extremely stable over a 2-week period with no changes in the contact angle, thickness, polypeptide tilt angle, or conformation. Beyond that, there is a gradual decrease in the thickness and increase in the contact angle of the bilayer that could be attributed to the oxidation of the MUA SAM molecules.

Supramolecular assembly of block copolypeptides with semiconductor nanocrystals.

We report the analogy between the self-assembly properties of amphiphilic phospholipids and the similar behavior observed for quantum dot (CdSe/CdS)-diblock copolypeptide hybrid systems, and the effect of the self-assembly on secondary structures of the polypeptides. At neutral pH, the diblock copolypeptide, poly(diethyleneglycol-l-lysine)-poly(l-lysine), comprises a positively charged poly-l-lysine (PLL) block and a hydrophilic and uncharged poly(diethyleneglycol-l-lysine) (PEGLL) block. By itself, the copolypeptide is not amphiphilic. However, when the polymers are mixed with water-soluble, negatively charged, citrate-functionalized quantum dots (QDs) in water, shell-like structures or dense aggregates are spontaneously formed. Electrostatic and hydrogen-bonding interactions between the positively charged PLL residues and the negatively charged ligands on the QDs lead to charge neutralization of the PLL block, while the PEGLL block remains hydrophilic. As a result, a pseudo "amphiphilic" molecular unit is formed in which the "hydrophobic" and hydrophilic sections constitute the charge-neutralized PLL residues together with the associating QD and the remaining polypeptide residues that are not neutralized, respectively. The generation of these "amphiphilic" molecular units in turn drives the formation of the QD-polypeptide assemblies. Support for this analogy comes from the observed transition in the shape of the assembly from a shell-like structure to a dense aggregate that is very much analogous to the vesicle-to-micelle transition observed in lipid systems. Furthermore, this shape transition can be explained qualitatively using a concept that is analogous to the surfactant number (N = a(hc)/a(hg)), which has been applied extensively in amphiphilic lipid systems. Specifically, as the ratio of the "hydrophobic" area (a(hc)) to the hydrophilic area (a(hg)) decreases, a shape transition from the shell-like structure to the dense aggregate occurs. In addition, the size of the shell-like structure changes as a function of the dimensions of the "amphiphilic" molecular unit in a manner that is similar to how the size of the lipid vesicle changes with the dimensions of the lipid molecule. Circular dichroism (CD) measurements have shown that the PEGLL-PLL molecule has a well-defined secondary structure (alpha-helical PEGLL block and random coil PLL block) that remains virtually unchanged after reacting with the QDs. This finding is consistent with the hypothesis that it is the electrostatic interaction between the amines on the PLL block and the citrate ligands on the QDs that drives the self-assembly.

Atomically flat gold on elastomeric substrate.

We present a procedure to fabricate extremely smooth Au films supported on thin elastomeric (PDMS) substrates. Minimum rms roughness and largest grain size are obtained using Si wafers, coated with native oxide and release layers, as templates for the growth of thermally evaporated Au films. The wafers are held at a temperature of 300 degrees C during deposition. The Au films, up to 200 nm thick, are then transferred onto poly(dimethylsiloxane) substrates which have been previously surface-functionalized with a (3-mercaptopropyl)trimethoxysilane adhesion layer. The resulting Au films have been found by AFM to be extremely smooth with rms-roughness 2.5-4 angstroms and to exhibit a crystalline morphology with flat grains >500 nm in size. Thinner films, down to 20 nm, are grown at lower temperature and are comparably smooth, but with a loss in crystalline morphology. We compare the results of this optimized procedure with other gold films grown on mica sheets as templates and to those produced using Ti-O-Si interfacial chemistry.