Physical, Hydric, Thermal and Mechanical Properties of Earth Renders Amended with Dolomitic Lime.

The global objective of this work was to manufacture resistant and durable (water resistant) earth renders with good thermal insulation. For this purpose, a medium plastic clayey soil from Kôdéni (Burkina Faso), constituted by kaolinite (62 wt.%), quartz (31 wt.%), and goethite (2 wt.%), was mixed with dolomitic lime (up to 6 wt.%) to manufacture earth renders. The mineralogical, microstructural, and chemical characteristics of dolomitic lime, as well as the physical (linear shrinkage, apparent density, and accessible porosity), hydric (water absorption test by capillarity and spray test), thermal (thermal conductivity), and mechanical (abrasion resistance, flexural, and compressive strengths) properties of the earth renders were evaluated. From these studies, it appears that the addition of dolomitic lime induces the formation of calcium silicate (CSH) and magnesium silicate (MSH) hydrates. These CSH and MSH are mainly formed from the pozzolanic reaction between finely ground quartz and the weak silica of kaolinite in basic media. These formed hydrates improve the physical, hydric, thermal, and mechanical properties of earth renders. This improvement is due to the fact that the formed CSH and MSH stick to the isolated particles of the soil, making them more compact. In view of the good mechanical strength and water resistance, as well as the low thermal conductivity, the elaborated earth renders are suitable for habitats with dry climates, such as the Sahel.

Characterization of the microbiome associated with in situ earthen materials.

BACKGROUND: The current increase in public awareness of environmental risks is giving rise to a growth of interest in the microbiological safety of buildings. In particular, microbial proliferation on construction materials can be responsible for the degradation of indoor air quality that can increase health-risk to occupants. Raw earth materials are still widely used throughout the world and, in some cases, are linked to heritage habitats, as in the southwest of France. Moreover, these building materials are currently the subject of renewed interest for ecological and economic reasons. However, the microbial status of earthen materials raises major concerns: could the microbiome associated with such natural materials cause disease in building occupants? Very few analyses have been performed on the microbial communities present on these supports. Characterizing the raw earth material microbiome is also important for a better evaluation and understanding of the susceptibility of such materials to microbial development. This study presents the distribution of in situ bacterial and fungal communities on different raw earth materials used in construction. Various buildings were sampled in France and the microbial communities present were characterized by amplicon high-throughput sequencing (bacterial 16S rRNA gene and fungal ITS1 region). Bacterial culture isolates were identified at the species level by MALDI-TOF mass spectrometry. RESULTS: The major fungal and bacterial genera identified were mainly associated with conventional outdoor and indoor environmental communities, and no specific harmful bacterial species were detected on earthen materials. However, contrary to expectations, few human-associated genera were detected in dwellings. We found lower microbial alpha-diversity in earthen material than is usually found in soil, suggesting a loss of diversity during the use of these materials in buildings. Interestingly enough, the main features influencing microbial communities were building history and room use, rather than material composition. CONCLUSIONS: These results constitute a first in-depth analysis of microbial communities present on earthen materials in situ and may be considered as a first referential to investigate microbial communities on such materials according to environmental conditions and their potential health impact. The bacterial and fungal flora detected were similar to those found in conventional habitats and are thought to be mainly impacted by specific events in the building's life, such as water damage.

Carbonation of municipal solid waste incineration electrostatic precipitator fly ashes in solution.

Carbonation was applied to a Pb- and Zn-contaminated fraction of municipal solid waste incineration electrofilter fly ashes in order to reduce heavy metal leaching. Carbonation tests were performed in solution, by Na2CO3 addition or CO2 bubbling, and were compared with washing (with water only). The injection of CO2 during the washing did not modify the mineralogy, but the addition of Na2CO3 induced the reaction with anhydrite, forming calcite. Microprobe analyses showed that Pb and Zn contamination was rather diffuse and that the various treatments had no effect on Pb and Zn speciation in the residues. The leaching tests indicated that carbonation using Na2CO3 was successful because it gave a residue that could be considered as non-hazardous material. With CO2 bubbling, Pb and Zn leaching was strongly decreased compared with material washed with water alone, but the amount of chromium extracted became higher than the non-hazardous waste limits for landfilling.