Tetra-penta-deca-hexagonal-graphene (TPDH-graphene) hydrogenation patterns: dynamics and electronic structure.

The advent of graphene has renewed the interest in other 2D carbon-based materials. In particular, new structures have been proposed by combining hexagonal and other carbon rings in different ways. Recently, Bhattacharya and Jana have proposed a new carbon allotrope, composed of different polygonal carbon rings containing 4, 5, 6, and 10 atoms, named tetra-penta-deca-hexagonal-graphene (TPDH-graphene). This unusual topology results in interesting mechanical, electronic, and optical properties with several potential applications, including UV protection. Like other 2D carbon structures, chemical functionalizations can be used to tune TPDH-graphene's physical/chemical properties. In this work, we investigate the hydrogenation dynamics of TPDH-graphene and its effects on its electronic structure, combining DFT and fully atomistic reactive molecular dynamics simulations. Our results show that H atoms are mainly incorporated on tetragonal ring sites (up to 80% at 300 K), leading to the appearance of well-delimited pentagonal carbon stripes. The electronic structure of the hydrogenated structures shows the formation of narrow bandgaps with the presence of Dirac cone-like structures, indicative of anisotropic transport properties.

Assessing the oxygen reduction reaction by a 2-electron mechanism on ceria surfaces.

The 2-electron pathway of the oxygen reduction reaction is an unwanted process in the development of fuel cells. In contrast, it has gained the scientific community's attention due to its importance as a promising way of removing emergent pollutants and endocrine disruptors from water bodies and a more sustainable alternative for large-scale commercial hydrogen peroxide production. Cerium oxide has shown remarkable potential and selectivity experimentally for this mechanism, and its possible applications, exceeding the previous reference materials. In this work, we studied the 2-electron pathway for oxygen reduction on different ceria-cleaving directions (100), (110), (221), and (331) by first principles methods based on density functional theory. Our results show that the (100) surface is the most favorable for reduction, with the (331) crystallographic plane also showing potential for good catalytic activity. This fact could be essential for designing new nanostructures, with higher portions of those planes exposed, for higher catalytic activity.

Bacteria as Bio-Template for 3D Carbon Nanotube Architectures.

It is one of the most important needs to develop renewable, scalable and multifunctional methods for the fabrication of 3D carbon architectures. Even though a lot of methods have been developed to create porous and mechanically stable 3D scaffolds, the fabrication and control over the synthesis of such architectures still remain a challenge. Here, we used Magnetospirillum magneticum (AMB-1) bacteria as a bio-template to fabricate light-weight 3D solid structure of carbon nanotubes (CNTs) with interconnected porosity. The resulting porous scaffold showed good mechanical stability and large surface area because of the excellent pore interconnection and high porosity. Steered molecular dynamics simulations were used to quantify the interactions between nanotubes and AMB-1 via the cell surface protein MSP-1 and flagellin. The 3D CNTs-AMB1 nanocomposite scaffold is further demonstrated as a potential substrate for electrodes in supercapacitor applications.

Ballistic Fracturing of Carbon Nanotubes.

Advanced materials with multifunctional capabilities and high resistance to hypervelocity impact are of great interest to the designers of aerospace structures. Carbon nanotubes (CNTs) with their lightweight and high strength properties are alternative to metals and/or metallic alloys conventionally used in aerospace applications. Here we report a detailed study on the ballistic fracturing of CNTs for different velocity ranges. Our results show that the highly energetic impacts cause bond breakage and carbon atom rehybridizations, and sometimes extensive structural reconstructions were also observed. Experimental observations show the formation of nanoribbons, nanodiamonds, and covalently interconnected nanostructures, depending on impact conditions. Fully atomistic reactive molecular dynamics simulations were also carried out in order to gain further insights into the mechanism behind the transformation of CNTs. The simulations show that the velocity and relative orientation of the multiple colliding nanotubes are critical to determine the impact outcome.

The structural and dynamical aspects of boron nitride nanotubes under high velocity impacts.

This communication report is a study on the structural and dynamical aspects of boron nitride nanotubes (BNNTs) shot at high velocities (∼5 km s(-1)) against solid targets. The experimental results show unzipping of BNNTs and the formation of hBN nanoribbons. Fully atomistic reactive molecular dynamics simulations were also carried out to gain insights into the BNNT fracture patterns and deformation mechanisms. Our results show that longitudinal and axial tube fractures occur, but the formation of BN nanoribbons from fractured tubes was only observed for some impact angles. Although some structural and dynamical features of the impacts are similar to the ones reported for CNTs, because BNNTs are more brittle than CNTs this results in a larger number of fractured tubes but with fewer formed nanoribbons.

Ambient solid-state mechano-chemical reactions between functionalized carbon nanotubes.

Carbon nanotubes can be chemically modified by attaching various functionalities to their surfaces, although harsh chemical treatments can lead to their break-up into graphene nanostructures. On the other hand, direct coupling between functionalities bound on individual nanotubes could lead to, as yet unexplored, spontaneous chemical reactions. Here we report an ambient mechano-chemical reaction between two varieties of nanotubes, carrying predominantly carboxyl and hydroxyl functionalities, respectively, facilitated by simple mechanical grinding of the reactants. The purely solid-state reaction between the chemically differentiated nanotube species produces condensation products and unzipping of nanotubes due to local energy release, as confirmed by spectroscopic measurements, thermal analysis and molecular dynamic simulations.

Enhanced Mechanical Stability of Gold Nanotips through Carbon Nanocone Encapsulation.

Gold is a noble metal that, in comparison with silver and copper, has the advantage of corrosion resistance. Despite its high conductivity, chemical stability and biocompatibility, gold exhibits high plasticity, which limits its applications in some nanodevices. Here, we report an experimental and theoretical study on how to attain enhanced mechanical stability of gold nanotips. The gold tips were fabricated by chemical etching and further encapsulated with carbon nanocones via nanomanipulation. Atomic force microscopy experiments were carried out to test their mechanical stability. Molecular dynamics simulations show that the encapsulated nanocone changes the strain release mechanisms at the nanoscale by blocking gold atomic sliding, redistributing the strain along the whole nanostructure. The carbon nanocones are conducting and can induce magnetism, thus opening new avenues on the exploitation of transport, mechanical and magnetic properties of gold covered by sp(2) carbon at the nanoscale.

Burning Graphene Layer-by-Layer.

Graphene, in single layer or multi-layer forms, holds great promise for future electronics and high-temperature applications. Resistance to oxidation, an important property for high-temperature applications, has not yet been extensively investigated. Controlled thinning of multi-layer graphene (MLG), e.g., by plasma or laser processing is another challenge, since the existing methods produce non-uniform thinning or introduce undesirable defects in the basal plane. We report here that heating to extremely high temperatures (exceeding 2000 K) and controllable layer-by-layer burning (thinning) can be achieved by low-power laser processing of suspended high-quality MLG in air in "cold-wall" reactor configuration. In contrast, localized laser heating of supported samples results in non-uniform graphene burning at much higher rates. Fully atomistic molecular dynamics simulations were also performed to reveal details of oxidation mechanisms leading to uniform layer-by-layer graphene gasification. The extraordinary resistance of MLG to oxidation paves the way to novel high-temperature applications as continuum light source or scaffolding material.

Unzipping carbon nanotubes at high impact.

The way nanostructures behave and mechanically respond to high impact collision is a topic of intrigue. For anisotropic nanostructures, such as carbon nanotubes, this response will be complicated based on the impact geometry. Here we report the result of hypervelocity impact of nanotubes against solid targets and show that impact produces a large number of defects in the nanotubes, as well as rapid atom evaporation, leading to their unzipping along the nanotube axis. Fully atomistic reactive molecular dynamics simulations are used to gain further insights of the pathways and deformation and fracture mechanisms of nanotubes under high energy mechanical impact. Carbon nanotubes have been unzipped into graphene nanoribbons before using chemical treatments but here the instability of nanotubes against defect formation, fracture, and unzipping is revealed purely through mechanical impact.