Phytochemical and biological assessment of secondary metabolites isolated from a rhizosphere strain, Sphingomonas sanguinis DM of Datura metel.

BACKGROUND: The plant roots excrete a large number of organic compounds into the soil. The rhizosphere, a thin soil zone around the roots, is a hotspot for microbial activity, making it a crucial component of the soil ecosystem. Secondary metabolites produced by rhizospheric Sphingomonas sanguinis DM have sparked significant curiosity in investigating their possible biological impacts. METHODS: A bacterial strain has been isolated from the rhizosphere of Datura metel. The bacterium's identification, fermentation, and working up have been outlined. The ethyl acetate fraction of the propagated culture media of Sphingomonas sanguinis DM was fractioned and purified using various chromatographic techniques. The characterization of the isolated compounds was accomplished through the utilization of various spectroscopic techniques, such as UV, MS, 1D, and 2D-NMR. Furthermore, the evaluation of their antimicrobial activity was conducted using the agar well diffusion method, while cytotoxicity was assessed using the MTT test. RESULTS: The extract from Sphingomonas sanguinis DM provided two distinct compounds: n-dibutyl phthalic acid (1) and Bis (2-methyl heptyl) phthalate (2) within its ethyl acetate fraction. Furthermore, the 16S rRNA gene sequence of Sphingomonas sanguinis DM has been registered under the NCBI GenBank database with the accession number PP422198. The bacterial extract exhibited its effect against gram-positive bacteria, inhibiting Streptococcus mutans (12.6 ± 0.6 mm) and Staphylococcus aureus (10.6 ± 0.6 mm) compared to standard antibiotics. Conversely, compound 1 showed a considerable effect against phytopathogenic fungi such as Alternaria alternate (56.3 ± 10.6 mm) and Fusarium oxysporum (21.3 ± 1.5 mm) with a MIC value of 17.5 µg/mL. However, it was slightly active against Klebsiella pneumonia (11.0 ± 1.0 mm). Furthermore, compound 2 was the most active metabolite, having a significant antimicrobial efficacy against Rhizoctonia solani (63.6 ± 1.1 mm), Pseudomonas aeruginosa (16.7 ± 0.6 mm), and Alternaria alternate (20.3 ± 0.6 mm) with MIC value at 15 µg/mL. In addition, compound 2 exhibited the most potency against hepatocellular (HepG-2) and skin (A-431) carcinoma cell lines with IC50 values of 107.16 µg/mL and 111.36 µg/mL, respectively. CONCLUSION: Sphingomonas sanguinis DM, a rhizosphere bacterium of Datura metel, was studied for its phytochemical and biological characteristics, resulting in the identification of two compounds with moderate antimicrobial and cytotoxic activities.

Effect of in-ovo inoculation of betaine on hatchability, serum antioxidant levels, muscle gene expression and intestinal development of broiler chicks.

This study investigated the effects of in-ovo inoculation of betaine on hatchability, hatching weight, and intestinal development, as well as serum and expression levels of some antioxidants in the posthatched chicks. A total of 350 fertile eggs of Hubbard efficiency plus breeder's flock were incubated at normal incubation temperature (37.5°C) and randomly assembled into 3 groups with 4 replicates, and 25 eggs per each. The experimental groups were allocated as noninjected control group (CN), diluent-injected group (CP, 0.1 mL saline), and betaine-injected group (B, 2.5 mg in 0.1 mL saline). The injections were performed in the air cells of the eggs on the 12th day of the embryonic phase. Hatchability percentage, hatching weight, serum-reduced glutathione (GSH), and superoxide dismutase (SOD) were estimated in 7-day-old chicks. Moreover, expression levels of the nuclear factor erythroid 2-related factor 2 (Nrf2) and SOD were determined in the breast skeletal muscles of chicks. Jejunum histo-morphometric analysis was assessed with computerised morphometric measurements. The results revealed that the hatchability percentage was not influenced by in-ovo injection of betaine or vehicle while betaine significantly increased the hatchling's weight of chicks. Moreover, there were a significant increase in SOD and Nrf2 mRNA expression levels. In-ovo injection of betaine significantly induced positive effects on intestinal morphometry by ameliorating the jejunal villus length, the ratio of villus height to villus width, and absorptive surface area.

Postharvest melatonin and chitosan treatments retain quality of 'Williams' bananas during ripening.

The effect of postharvest dipping treatments with 0.5 mM melatonin (MT) and 1% chitosan (CT) either alone or in combination on quality of pre-climacteric 'Williams' bananas during ripening at ambient conditions were investigated. MT or CT treatments delayed ripening by retaining greener peel, higher firmness, titratable acidity (TA), but lower total soluble solids (TSS) and TSS/TA, weight loss, browning and electrolyte leakage than the control. Total phenol (TPC) and flavonoid contents (TFC) in both peel and pulp increased up to 6 days and then decreased and was higher in treated fruit than the control. Vitamin C content decreased up to 3 days, then increased and was higher in treated fruit than control. MT and CT combination exhibited the highest TPC, TFC and vitamin C contents compared to other treatments. Radical scavenging capacity (RSC) of peel and pulp increased up to 6 days, then decreased and was higher in treated fruit than the control. The treated fruit exhibited lower polyphenoloxidase (PPO) and hydrolytic enzymes but higher peroxidase (POD) activities in both peel and pulp than the control. Postharvest treatments with 0.5 mM MT and 1% CT alone or in combination could be used to retain quality of 'Williams' bananas during ripening.

Assessment of bone morphogenetic protein-7 loaded chitosan/ß-Glycerophosphate hydrogel on periodontium tissues regeneration of class III furcation defects.

Background: Periodontitis is a long-term, multifactorial inflammatory condition that is triggered by bacterial germs and interacts with the host's immune system. The unique attachment of fibrous tissue between the cementum and bone presents a challenge for periodontal regeneration. Aim: To achieve the lowest optimum dose of BMP-7 that helps in periodontal regeneration, involving newly formed cementum, PDL and bone. Materials and methods: Five healthy mongrel dogs were used for the study. A critical class III furcation defect was created using rotating burs. The bone defects (ten defects for each group) were allocated to one of the subsequent groups: (Group 1) control with the surgical defect only. (Group 2) Surgical defect implanted with hydrogel only (CS/ß-GP). (Group 3) Surgical defect implanted with CS/BMP-7 (50 ng/ml). (Group 4) Surgical defect implanted with CS/BMP-7 (100 ng/ml). Results: Histomorphometric and H&E analysis revealed a statistically significant difference in bone, PDL, and cementum regeneration defects filled with CS/BMP-7 (100 ng/ml) compared with other groups. Conclusion: The standard effective dose for BMP-7 use in periodontal regeneration is 100 ng/ml.

Efficacy of 24-epibrassinolide-chitosan composite coating on the quality of 'Williams' bananas during ripening.

BACKGROUND: Banana fruit undergo rapid metabolic changes following the induction of ripening. They result in excessive softening, chlorophyll degradation, browning, and senescence during postharvest life. As part of a continuous effort to extend fruit shelf life and maintain the best possible quality, this study examined the effect of a 24-epibrassinolide (EBR) and chitosan (CT) composite coating on 'Williams' bananas ripening in ambient conditions. Fruit were soaked in 20 µM EBR, 10 g L-1 CT (w/v), and 20 µM EBR + 10 g L-1 CT solutions for 15 min and were kept at 23 ± 1 °C and 85-90% (RH) for 9 days. RESULTS: The combined treatment (20 µM EBR + 10 g L-1 CT) clearly delayed fruit ripening; bananas treated with this showed less peel yellowing, weight loss, and total soluble solids, and greater firmness, titratable acidity, membrane stability index, and ascorbic acid content than the untreated control. After the treatment, the fruit also presented higher radical scavenging capacity, and higher total phenol and flavonoid content. The activity of polyphenoloxidase and hydrolytic enzymes was lower, and that of peroxidase was higher in both the peel and pulp of all the treated fruit than in the control. CONCLUSION: The combined treatment (20 µM EBR + 10 g L-1 CT) is suggested as an effective composite edible coat to retain the quality of 'Williams' bananas during ripening. © 2023 Society of Chemical Industry.

Exploitation of cantaloupe peels for bacterial cellulose production and functionalization with green synthesized Copper oxide nanoparticles for diverse biological applications.

The promising features of most bacterial celluloses (BC) promote the continuous mining for a cost-effective production approach toward wide and sustainable applications. Herein, cantaloupe peels (CP) were successfully implemented for sustainable BC production. Results indicated that the enzymatically hydrolyzed CP supported the maximum BC production of approximately 3.49 g/L when used as a sole fermentation media. The produced BC was fabricated with polyvinyl alcohol (PVA) and chitosan (Ch), and loaded with green synthesized copper oxide nanoparticles (CuO-NPs) to improve its biological activity. The novel composite showed an antimicrobial activity against several human pathogens such as Staphylococcus aureus, Streptococcus mutans, Salmonella typhimurium, Escherichia coli, and Pseudomonas fluorescens. Furthermore, the new composite revealed a significant in vitro anticancer activity against colon (Caco-2), hepatocellular (HepG-2), and breast (MDA) cancer cells, with low IC50 of 0.48, 0.27, and 0.33 mg/mL for the three cell lines, respectively. On the other hand, the new composite was remarkably safe for human skin fibroblast (HSF) with IC50 of 1.08 mg/mL. Interestingly, the composite membranes exhibited lethal effects against all stages of larval instar and pupal stage compared with the control. In this study, we first report the diverse potential applications of BC/PVA/Ch/CuO-NPs composites based on green synthesized CuO-NPs and sustainably produced BC membrane.

Effect of flowering stage and storage conditions on pollen quality of six male date palm genotypes.

Availability of efficient male genotypes is critical for successful artificial pollination and regular bearing of female date palms. The effect of flowering stage and storage conditions on pollen quality of six male date palm genotypes encoded 'ABD1', 'P4', 'P3', 'P8', 'P7' and 'P13'were evaluated. Pollen collected from spathes developed at the middle of flowering stage exhibited the best viability (90%) and germinability (85%) compared to other stages. Pollen viability was greater than 90%, except for 'P8' that exhibited 80%, while, germinability greatly varied among the genotypes. Pollen quality decreased during 4 months of storage upon genotype and temperature, with a minimum reduction at -30 °C followed by 4 °C. Heat shock exposure (33 ± 2 °C) following storage revealed that pollen stored at -30 °C or 4 °C should be used for pollination on the same day of take out to avoid dramatic quality loss. The 'ABD1', an early flowering genotype, proved highest pollen quality both at fresh stage and after storage. While, the 'P3', a late flowering genotype, retained its pollen quality during storage. However, the 'P13' genotype exhibited excellent pollen quality when fresh, but greatly loses germinability during storage.

Mycosynthesis, Characterization, and Mosquitocidal Activity of Silver Nanoparticles Fabricated by Aspergillus niger Strain.

Herein, silver nanoparticles (Ag-NPs) were synthesized using an environmentally friendly approach by harnessing the metabolites of Aspergillus niger F2. The successful formation of Ag-NPs was checked by a color change to yellowish-brown, followed by UV-Vis spectroscopy, Fourier transforms infrared (FT-IR), Transmission electron microscopy (TEM), and X-ray diffraction (XRD). Data showed the successful formation of crystalline Ag-NPs with a spherical shape at the maximum surface plasmon resonance of 420 nm with a size range of 3-13 nm. The Ag-NPs showed high toxicity against I, II, III, and IV instar larvae and pupae of Aedes aegypti with LC50 and LC90 values of 12.4-22.9 ppm and 22.4-41.4 ppm, respectively under laboratory conditions. The field assay exhibited the highest reduction in larval density due to treatment with Ag-NPs (10× LC50) with values of 59.6%, 74.7%, and 100% after 24, 48, and 72 h, respectively. The exposure of A. aegypti adults to the vapor of burning Ag-NPs-based coils caused a reduction of unfed individuals with a percentage of 81.6 ± 0.5% compared with the positive control, pyrethrin-based coils (86.1 ± 1.1%). The ovicidal activity of biosynthesized Ag-NPs caused the hatching of the eggs with percentages of 50.1 ± 0.9, 33.5 ± 1.1, 22.9 ± 1.1, and 13.7 ± 1.2% for concentrations of 5, 10, 15, and 20 ppm, whereas Ag-NPs at a concentration of 25 and 30 ppm caused complete egg mortality (100%). The obtained data confirmed the applicability of biosynthesized Ag-NPs to the biocontrol of A. aegypti at low concentrations.

Enhanced Antimicrobial, Cytotoxicity, Larvicidal, and Repellence Activities of Brown Algae, Cystoseira crinita-Mediated Green Synthesis of Magnesium Oxide Nanoparticles.

Herein, the metabolites secreted by brown algae, Cystoseira crinita, were used as biocatalyst for green synthesis of magnesium oxide nanoparticles (MgO-NPs). The fabricated MgO-NPs were characterized using UV-vis spectroscopy, Fourier transforms infrared spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy linked with energy-dispersive X-ray (SEM-EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Data showed successful formation of crystallographic and spherical MgO-NPs with sizes of 3-18 nm at a maximum surface plasmon resonance of 320 nm. Moreover, EDX analysis confirms the presence of Mg and O in the sample with weight percentages of 54.1% and 20.6%, respectively. Phyco-fabricated MgO-NPs showed promising activities against Gram-positive bacteria, Gram-negative bacteria, and Candida albicans with MIC values ranging between 12.5 and 50 µg mL-1. The IC50 value of MgO-NPs against cancer cell lines (Caco-2) was 113.4 µg mL-1, whereas it was 141.2 µg mL-1 for normal cell lines (Vero cell). Interestingly, the green synthesized MgO-NPs exhibited significant larvicidal and pupicidal activity against Musca domestica. At 10 µg mL-1 MgO-NPs, the highest mortality percentages were 99.0%, 95.0%, 92.2%, and 81.0% for I, II, III instars' larvae, and pupa of M. domestica, respectively, with LC50 values (3.08, 3.49, and 4.46 µg mL-1), and LC90 values (7.46, 8.89, and 10.43 µg mL-1), respectively. Also, MgO-NPs showed repellence activity for adults of M. domestica at 10 µg mL-1 with 63.0%, 77.9%, 84.9%, and 96.8% after 12, 24, 48, and 72 h, respectively.

Effect of pollination time, the hour of daytime, pollen storage temperature and duration on pollen viability, germinability, and fruit set of date palm (Phoenix dactylifera L.) cv "Deglet Nour".

Success artificial pollination with viable pollen is crucial process in the production chain of date palms. This study evaluated the impact of pollen storage temperature and duration, pollination time following spathe cracking, and the hour of daytime on pollen viability, germinability, fruit set and yield of 'Deglet Nour' date palm cultivar. In in vitro tests, fresh pollen showed the maximum viability (96.3%) and germination (85%) but it decreased thereafter upon the storage temperature (28, 4 and -30 °C) and duration (3, 6, 9 and 12 months). In this respect, pollen stored at -30 °C retained highest viability and germinability followed by those stored at 4 and then at 28 °C. In filed experiments, fruit set was 85, 75, 65, and 45% with pollination using fresh pollen, or pollen stored at -30, 4 and 28 °C, respectively. Fruit set was 95%, 75%, and less than 50%, for pollination performed on the same day of spathe cracking, 6 and 12 days later, respectively. The highest fruit set percentage and yield/bunch were obtained with pollination performed between 12.0 pm and 15.0 pm in contrast to 8.0-11.0 am or 16.0-17.0.

Oxidative stress, apoptosis and histopathological alterations in brain stem and diencephalon induced by subacute exposure to fipronil in albino rats.

Fipronil (FIP) is a highly effective insecticide that has been used in agriculture and veterinary medicine. Its neurotoxic effect to insects and to non-target organisms, after nonintentional exposure, was reported. Many studies were conducted to evaluate FIP effects on mammals. However, slight is known about its effect on the brain stem and diencephalon. The current study was designed to investigate the ability of FIP to induce oxidative stress as a molecular mechanism of FIP neurotoxicity that resulted in apoptosis and neural tissue reactivity in these regions. Ten adult male rats received 10 mg/kg of FIP technical grade by oral gavage, daily for 45 days. Brain stem and diencephalon were processed to examine oxidative stress-induced macromolecular alteration (MDA, PCC and DNA fragmentation). Also, the histopathological assessment and immunoreactivity for caspase-3 (active form), iNOS and GFAP were performed on the thalamus, hypothalamus and medulla oblongata. Our results revealed that FIP significantly raised MDA, PCC and DNA fragmentation (p ≤ 0.05). In addition, significantly increased immunoreactivity to GFAP, iNOS and caspase-3 (active form) in the FIP-treated group was noticed (p ≤ 0.05). Moreover, alterations in the histoarchitecture of the neural tissue of these regions were observed. We conclude that FIP can induce oxidative stress, leading to apoptosis and tissue reaction in brain stem and diencephalon.

Enhancement of photocatalytic and biological activities of chitosan/activated carbon incorporated with TiO2 nanoparticles.

Novel and sustainable chitosan (CS)/activated charcoal (AC) composites were prepared by cross-linking with epichlorohydrin (ECH) to form a porous structure. Different titanium dioxide nanoparticle (TiO2 NPs) concentrations (0, 0.2, 0.4, and 0.8% w/w) were added to enhance the photocatalytic, antibacterial, larvicidal, and pupicidal activities' efficiency toward Rose Bengal (RB) dye and the Culex pipiens. The composites were characterized by FT-IR, XRD, XPS, BET and SEM. The SEM images revealed the porous structure of CS/AC and TiO2 nanoparticles were uniformly distributed in the CS/AC matrix. The degradation of RB dye was used to test the photocatalytic behavior of the composites. Supporting TiO2 on a CS/AC matrix resulted in a significant increase in photocatalytic performance. The antibacterial activities supported by CS/AC/TiO2 NPs were evaluated by bacterial growth inhibition against B. subtilis, S. aureus, E. coli, and P. aeruginosa. The results showed that CS/AC/TiO2 NPs composite has an inhibitory effect and therefore considered antibacterial agents. CS/AC/0.4%TiO2 NPs showed maximum efficacy against larvicidal activity and pupicidal of mosquito vector which recorded 99.00 ± 1.14, 95.00 ± 1.43, and 92.20 ± 2.64 for the first, second, and third larval instars and 66.00 ± 2.39 for pupal mortality, while the repellent activity reported high protection at 82.95 ± 2.99 with 3.24 mg/cm2 dose compared to control DEET.

Fipronil induced oxidative stress in neural tissue of albino rat with subsequent apoptosis and tissue reactivity.

Fipronil (FIP) insecticide is extensively used in agriculture, public health and veterinary medicine. Although it is considered as a neurotoxin to insects (target organisms) and exhibits neurological signs upon vertebrates (non-target organisms) exposure, slight is known about its potential neurotoxic effects and its molecular mechanisms on vertebrates. The current study is designed to assess oxidative stress as a molecular mechanism of FIP neurotoxicity subordinated with apoptosis and neural tissue reactivity. Ten adult male albino rats received 10 mg/kg body weight fipronil technical grade by oral gavage daily for 45 days (subacute exposure). Brain neural tissue regions (hippocampus, cerebellum and caudate putamen) were processed to examine oxidative stress induced cellular macromolecular alterations as MDA, PCC and DNA fragmentation. Besides, TNF-α and Bcl-2 gene expression and immunoreactivity for caspase-3 (active form), iNOS and GFAP were evaluated. Also, histopathological assessment was conducted. We found that FIP significantly raised MDA, PCC and DNA fragmentation (p ≤ 0.05). Also, it significantly upregulated TNF-α and non-significantly down-regulated Bcl-2 gene expression (p ≤ 0.05). Further, significant increased immunoreactivity to GFAP, iNOS and caspase-3 (active form) in these brain neural tissue regions in FIP treated group was noticed (p ≤ 0.05). Histopathological findings, including alterations in the histological architecture and neuronal degeneration, were also observed in these brain regions of FIP treated group. In conclusion, we suggest the ability of FIP to induce oxidative stress mediated macromolecular alterations, leading to apoptosis and tissue reaction in these brain regions which showed variable susceptibility to FIP toxic effects.

An Eco-Friendly Approach to the Control of Pathogenic Microbes and Anopheles stephensi Malarial Vector Using Magnesium Oxide Nanoparticles (Mg-NPs) Fabricated by Penicillium chrysogenum.

The discovery of eco-friendly, rapid, and cost-effective compounds to control diseases caused by microbes and insects are the main challenges. Herein, the magnesium oxide nanoparticles (MgO-NPs) are successfully fabricated by harnessing the metabolites secreted by Penicillium chrysogenum. The fabricated MgO-NPs were characterized using UV-Vis, XRD, TEM, DLS, EDX, FT-IR, and XPS analyses. Data showed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with sizes of 7-40 nm at a maximum wavelength of 250 nm. The EDX analysis confirms the presence of Mg and O ions as the main components with weight percentages of 13.62% and 7.76%, respectively. The activity of MgO-NPs as an antimicrobial agent was investigated against pathogens Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans, and exhibited zone of inhibitions of 12.0 ± 0.0, 12.7 ± 0.9, 23.3 ± 0.8, 17.7 ± 1.6, and 14.7 ± 0.6 mm respectively, at 200 µg mL-1. The activity is decreased by decreasing the MgO-NPs concentration. The biogenic MgO-NPs exhibit high efficacy against different larvae instar and pupa of Anopheles stephensi, with LC50 values of 12.5-15.5 ppm for I-IV larvae instar and 16.5 ppm for the pupa. Additionally, 5 mg/cm2 of MgO-NPs showed the highest protection percentages against adults of Anopheles stephensi, with values of 100% for 150 min and 67.6% ± 1.4% for 210 min.

Rhizopus oryzae-Mediated Green Synthesis of Magnesium Oxide Nanoparticles (MgO-NPs): A Promising Tool for Antimicrobial, Mosquitocidal Action, and Tanning Effluent Treatment.

The metabolites of the fungal strain Rhizopus oryaze were used as a biocatalyst for the green-synthesis of magnesium oxide nanoparticles (MgO-NPs). The production methodology was optimized to attain the maximum productivity as follows: 4 mM of precursor, at pH 8, incubation temperature of 35 °C, and reaction time of 36 h between metabolites and precursor. The as-formed MgO-NPs were characterized by UV-Vis spectroscopy, TEM, SEM-EDX, XRD, DLS, FT-IR, and XPS analyses. These analytical techniques proved to gain crystalline, homogenous, and well-dispersed spherical MgO-NPs with an average size of 20.38 ± 9.9 nm. The potentiality of MgO-NPs was dose- and time-dependent. The biogenic MgO-NPs was found to be a promising antimicrobial agent against the pathogens including Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans with inhibition zones of 10.6 ± 0.4, 11.5 ± 0.5, 13.7 ± 0.5, 14.3 ± 0.7, and 14.7 ± 0.6 mm, respectively, at 200 µg mL-1. Moreover, MgO-NPs manifested larvicidal and adult repellence activity against Culex pipiens at very low concentrations. The highest decolorization percentages of tanning effluents were 95.6 ± 1.6% at 100 µg/ 100 mL after 180 min. At this condition, the physicochemical parameters of tannery effluents, including TSS, TDS, BOD, COD, and conductivity were reduced with percentages of 97.9%, 98.2%, 87.8%, 95.9%, and 97.3%, respectively. Moreover, the chromium ion was adsorbed with percentages of 98.2% at optimum experimental conditions.

Embryonic thermal manipulation of Japanese quail: effects on embryonic development, hatchability, and post-hatch performance.

Embryonic thermal manipulation led to several modifications in molecular, physiological, and biochemical parameters which affect pre- and post-hatch growth performance. The current study aims to elucidate the onset and long-term effects of intermittent thermal manipulations (TM) during two-time windows, early/late, of embryogenesis in Japanese quail (Coturnix japonica) on embryonic development, hatchability, muscle histogenesis, and post-hatch growth performance. Four groups were created; quail eggs in the control group were incubated at 37.7 °C and relative humidity (RH) 55%. Three thermally treated groups were incubated intermittently at 41 °C and 65% RH intermittently (3 h/day): early embryogenesis group (EE) was thermally treated during embryonic days (ED) 6-8, late embryogenesis group (LE) was thermally treated during (ED12-ED14), and early and late embryogenesis group (EL) was thermally manipulated in both time windows. Relative embryo weights in EL and EE were significantly lighter than those in LE and Ctrl groups. The hatched chicks were reared under optimal managemental conditions (three replicates per treatment). Average daily feed intake was recorded, and feed conversion ratio (FCR) was calculated. Histological and quantitative analyses of muscle fibers were performed. The results revealed that TM led to significant hypertrophy of quail breast muscle in (EE). Intermittent short-term (3-6 h) thermal manipulation (39-40 °C) protocols during early embryogenesis (ED6-ED8) could be recommended to enhance muscle mass growth and breast muscle yield in the Japanese quail.

Prospecting genomic regions associated with milk production traits in Egyptian buffalo.

The objectives of the current study were to detect putative genomic loci and to identify candidate genes associated with milk production traits in Egyptian buffalo. A total number of 161 479 daily milk yield (DMY) records and 60 318 monthly measures for fat and protein percentages (FP and PP, respectively), along with fat and protein yields (FY and PY, respectively) from 1670 animals were used. Genotyping was performed using Axiom® Buffalo Genotyping 90 K array. Genome-wide association study (GWAS) for each trait was performed using PLINK. After Bonferroni correction, 47 SNPs were associated with one or more milk production traits. These SNPs were distributed over 36 quantitative trait loci (QTL) and located on 20 buffalo chromosomes (BBU). For the 47 SNPs, one was overlapped for three traits (DMY, FY, and PY), six were associated with two traits (one for PP and PY and five for FY and PY) while the rest were associated with only one trait. Out of 36 identified QTL, eleven were overlapped with previously reported loci in buffalo and/or cattle populations. Some of these SNPs are placed within or close to potential candidate genes, for example: TPD52, ZBTB10, RALYL and SNX16 on BBU15, ADGRD1 on BBU17, ESRRG on BBU5 and GRIP1 on BBU4. This is the first reported study between genome-wide markers and milk components in Egyptian buffalo. Our findings provide useful information to explore the genetic mechanisms and relevant genes contributing to the variation in milk production traits. Further confirmation studies with larger population size are necessary to validate the findings and detect the causal genetic variants.

Multifunctional properties of spherical silver nanoparticles fabricated by different microbial taxa.

This study addresses the impacts of metabolites from different microbial taxa on the fabrication and multifunctional biological properties of spherical silver nanoparticles (Ag-NPs). Three microbial taxa, a bacterial (Bacillus cereus A1-5), actinomycetes (Streptomyces noursei H1-1), and fungal (Rhizopus stolonifer A6-2) strains were used for Ag-NPs biosynthesis, whereas Streptomyces noursei is demonstrated for the first time. These isolates were identified using either 16S rRNA or ITS gene sequencing. Characterization of Ag-NPs was done using color change analysis, Uv-Vis spectroscopy, FT-IR spectroscopy, XRD, TEM, SEM-EDX, DLS, and Zeta potential analysis. All biosynthesized NPs exhibited spherical shape with different sizes ranged from 6‒50 nm, 6-30 nm and 6-40 nm for NPs obtained by A1-5, H1-1 and A6-2, respectively. The crystalline center cubic face of Ag-NPs was confirmed using XRD at 2θ values 38.08o, 44.27o, 64.41o and 77.36o. FT-IR analysis revealed varied intense absorption peaks for biomolecules required for NPs synthesize by each microbial strain. The stability of spherical Ag-NPs was confirmed due to highly DLS negative surface charge of ‒17.5mV, ‒18.9mV, and ‒15.6mV for NPs synthesized by strains A1-5, H1-1, and A6-2, respectively. Ag-NPs exhibited a broadspectrum of antibacterial activity against Gram-positive and Gram-negative bacteria with varied effectiveness. They also exhibited a cytotoxic effect against cancer cell line (caco-2) in a dose-dependent pattern with IC50 of 8.9 ± 0.5, 5.6 ± 3.0, 11.2 ± 0.5 µg/ml for NPs synthesized by strains A1-5, H1-1, and A6-2, respectively. Moreover, these spherical Ag-NPs showed larvicidal activity against the 3rd instar larvae of the dengue vector Aedes aegypti.

Multifunctional cellulose nanocrystal /metal oxide hybrid, photo-degradation, antibacterial and larvicidal activities.

Cellulose nanocrystal (CNC) and ZnO/CuO nanostructure were successfully synthesized by acid hydrolysis and sol-chemical methods, respectively. For the first time, CNC was used as a host polymer for synthesis of CNC/ZnO/CuO through In-situ solution casting technique. Morphological and structural of CNC, ZnO/CuO and hybrid CNC/ZnO/CuO were investigated by TEM, SEM-EDX, FT-IR, XRD and XPS analyses. The analysis revealed that, poly-dispersed, smooth and rod like CNC with an average length of ∼ 85.4 nm, average diameter of ∼13.9 nm and surface charge of 0.01 mmol/gm. As well, irregular shapes as hexagonal, spherical and cluster or star like of ZnO/CuO were formed. EDX and XRD spectra exhibited highly purified CNC/ZnO/CuO and pointed to cellulose II crystallite form with a monoclinic structure. The results demonstrated that, 91.3 % and 99.7 % dye degradation was achieved after 40 min of irradiation due to ZnO/CuO and CNC/ZnO/CuO treatment. Moreover, the inhibition zones formed due to 100 ppm ZnO/CuO were duplicated after integrating CNC (from 7.7:10.3 mm to 14.3:20.3 mm). The hybrid nanostructure exhibit larvicidal activity against Anopheles stephensi better than CNC and ZnO/CuO nanostructures.