Numerical investigation of the impact of temperature-dependent thermal conductivity and viscosity on thermo-particle heat transfer through stationary sphere and using plume.

Nanofluids have a wide range of applications due to their unique properties, such as enhanced thermal conductivity, convective heat transfer, and mass transfer. These applications can be seen in heat exchangers, cooling systems, and electronic devices to improve thermal performance. To enhance the cooling efficiency and lifespan of electronic devices such as smartphones, televisions, and computers nanofluids are used. These novel types of fluids can be used in energy storage systems, cancer treatment, imaging, and drug deliveryKeeping in mind, the real-time applications in engineering, industry, and science, the current study is carried out. In the present study for heat and mass transportation, the two-phase Buongiorno model for nanofluid is employed to scrutinize Brownian motion and thermophoresis aspects using stationary sphere and plume region. The temperature-dependent viscosity and thermal conductivity effects are encountered in momentum and energy equations, respectively are encountered. The proposed mechanism in the partial differential equations having dimensional form is converted to a non-dimensional form using appropriate dimensionless variables. The solution of the current non-linear and coupled model is obtained using the finite difference method. The numerical solutions presented in graphs and tables indicate that along with heat and mass transfer phenomena are entirely dependent on thermophoresis, Brownian motion, temperature-dependent viscosity, and thermal conductivity. The results indicate that the quantitative behavior of the velocity field is enhanced by increasing values of thermal conductivity variation parameters for both the sphere and the plume region at each position. On the other hand, the reverse trend is noted against the rising magnitudes of the viscosity variation parameter, thermophoresis parameter, and Brownian diffusion parameter. Additionally, the temperature in the plume region declines to enhance thermal conductivity variation parameter. A test for grid independence was performed by considering various grid points. Excellent solution accuracy has been seen as the number of grid points has risen. This ensures the validity and accuracy of the currently employed method. The current results are compared with already published solutions for the validation of the current model for specific cases. It has been noted that there is excellent agreement between both of the results. This close agreement between the results indicates the validation of the current solutions.

Thermal Energy Storage Using Hybrid Nanofluid Phase Change Material (PCM) Based on Waste Sludge Incorp Rated ZnO/α-Fe2O3.

Renewable solar energy storage facilities are attracting scientists' attention since they can overcome the key issues affecting the shortage of energy. A nanofluid phase change material (PCM) is introduced as a new sort of PCM is settled by suspending small proportions of nanoparticles in melting paraffin. ZnO/α-Fe2O3 nanocrystals were prepared by a simple co-precipitation route and ultrasonically dispersed in the paraffin to be a nanofluid-PCM. The behaviors of the ZnO/α-Fe2O3 nanocrystals were verified by X-ray diffraction (XRD) analysis, and the average particle size and the morphology of the nanoparticles were explored by transmission electron microscopy (TEM). For the object of industrial ecology concept, aluminum-based waste derived from water-works plants alum sludge (AS) is dried and augmented with the ZnO/α-Fe2O3 nanocrystals as a source of multimetals such as aluminum to the composite, and it is named AS-ZnO/α-Fe2O3. The melting and freezing cycles were checked to evaluate the PCM at different weight proportions of AS-ZnO/α-Fe2O3 nanocrystals, which confirmed that their presence enhanced the heat transfer rate of paraffin. The nanofluids with AS-ZnO/α-Fe2O3 nanoparticles revealed good stability in melting paraffin. Additionally, the melting and freezing cycles of nanofluid-PCM (PCM- ZnO/α-Fe2O3 nanoparticles) were significantly superior upon supplementing ZnO/α-Fe2O3 nanoparticles. Nanofluid-PCM contained the AS-ZnO/α-Fe2O3 nanocrystals in the range of 0.25, 0.5, 1.0, and 1.5 wt%. The results showed that 1.0 wt% AS-ZnO/α-Fe2O3 nanocrystals contained in the nanofluid-PCM could enhance the performance with 93% with a heat gained reached 47 kJ.

A derivative-free root-finding algorithm using exponential method and its implementation.

OBJECTIVE: In this paper, we develop a new root-finding algorithm to solve the given non-linear equations. The proposed root-finding algorithm is based on the exponential method. This algorithm is derivative-free and converges fast. RESULTS: Several numerical examples are presented to illustrate and validation of the proposed methods. Microsoft Excel and Maple implementation of the proposed algorithm is presented with sample computations.

Adhesive sonic agitation improves bonding durability to class-II cavity preparation.

The purpose of this study was to evaluate the effect of adhesive sonic agitation on resin-dentin micro-tensile bond strength (µTBS) and interfacial morphology at the gingival wall of class-II cavity preparation. Seventy-two molars with prepared class-II cavities were divided into six groups (n = 12) according to the bonding mode; etch-and-rinse (E&R) or self-etch (SE) and application protocol of the universal adhesive (UA) employed (Clearfil Universal Bond Quick, Kuraray Noritake); following the manufacturer instructions (MI), manual agitation for 20 s (20s), or sonic agitation for 20 s using a modified sonic micro-brush mounted on EndoActivator device, Dentsply Sirona, (sonic). Restored teeth were sectioned into resin-dentin beams and slaps and µTBS was evaluated at 1 week (1w) and after thermocycling (10k). µTBS data were analyzed using the linear mixed-effects modeling with specific contrast (p < 0.05). The resin-dentin interfacial morphology was evaluated using a scanning electron microscope. Adhesive sonic agitation resulted in significantly higher µTBS means in both E&R and SE modes, compared to MI group. The µTBS of MI group showed significant reduction upon aging when applied in SE mode. Sonic agitation was associated with enhanced adhesive infiltration into dentin specially in E&R mode. Sonic agitation of UA using modified sonic micro-brush attached to EndoActivator device significantly improved the resin-dentin µTBS and interfacial morphology at the gingival wall of class-II cavity preparation.

"No-Primer" Resin Cementation of Lithium Disilicate Ceramic: A Microtensile Bond Strength Evaluation.

OBJECTIVE: The objective of this study was to evaluate the resin-ceramic adhesion of a long-carbon-chain silane (LCSI)-containing resin cement. METHODS: Polished lithium disilicate ceramic discs were etched with hydrofluoric acid and randomly assigned into four groups; (PSAP), cemented using a silane-free resin cement with no prior priming; (PSAP-S), primed using a silane-containing primer before cementation using a silane-free resin cement; (PSAU), cemented using a LCSI-containing resin cement with no prior priming; (PSAU-S), primed as for the group (PSAP-S) and cemented using a LCSI-containing resin cement. The cemented blocks were sectioned into microbeams. The resin-ceramic microtensile bond strength (µTBS) was measured at 1 week and after thermocycling. The failure modes of the tested microbeams were evaluated. RESULTS: The µTBS of the LCSI-containing and silane-free resin cements, either with or without a prior priming step, did not significantly differ. The adhesion of the LCSI-containing resin cement to lithium disilicate ceramic, either with or without a prior priming step, did not significantly deteriorate after artificial aging. CONCLUSIONS: The long-carbon-chain silane (LCSI) monomer incorporated in the resin cement eliminated the need for a silane priming step of a hydrofluoric acid-etched lithium disilicate ceramic.

Effects of Accelerated Aging on Color Stability and Surface Roughness of a Biomimetic Composite: An In Vitro Study.

The aim of this in vitro study is to compare the color stability and surface roughness of conventional and self-blending resin composites before and after staining and aging. Three conventional composites (Filtek Z350, IPS Empress Direct, and Estalite Palfique LX5) and one self-blending (Omnichroma) resin composite were used in this study. Sixty discs were prepared and polymerized in a metal mold (n = 15 per group). Samples were then finished and polished by Layan discs. Color testing and roughness testing were measured as a baseline (T0) by a spectrophotometer and profilometry. Samples were then stained with tea for 24 h, water aged for 30 days, and then a second reading (T1) was performed. Finishing and polishing were performed again, and a third reading (T2) was collected. All groups showed significant decrease in all color parameters (L*, a*, and b*); however, after polishing, all groups showed color enhancements matching pre-experiment baseline colors in all color parameters (L*, a*, and b*), except for Estelite Palfique LX5, which showed a significant difference in L relative to the baseline. Furthermore, Estalite Palfique LX5 showed increased roughness after staining compared to the baseline, unlike other groups. No significant differences in color stability were found between self-blending composites and other composite materials. Accelerated aging and staining had minimal effects on the surface roughness of self-blending composite.

10-Methacryloyloxydecyl Dihydrogen Phosphate (10-MDP)-Containing Cleaner Improves Bond Strength to Contaminated Monolithic Zirconia: An In-Vitro Study.

Contamination of zirconia restorations before cementation can impair the resin-zirconia bonding durability. The objective of this study was to evaluate the effect of human saliva or blood decontamination with 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP)-containing cleaner on the resin-zirconia shear bond strength (SBS). METHODS: A total of 220 zirconia specimens were prepared and air-abraded and randomly distributed into 11 groups (n = 20 per group). Except for the control group (no contamination), zirconia specimens were contaminated with either human saliva (five groups) or blood (five groups), and then subjected to one of five cleaning methods: water rinsing, 38% phosphoric acid etchant (Pulpdent Corp., Watertown, MA, USA), 70% isopropanol alcohol (Avalon Pharma, Riyadh, Saudi Arabia), Ivoclean (Ivoclar Vivadent, Schaan, Lichtenstein) and Katana Cleaner (Kuraray Noritake, Tokyo, Japan). The resin-zirconia SBS was tested at 24 h and after thermocycling (10 k cycles). Three-way ANOVA followed by Tukey's multiple comparisons test were utilized to analyze the SBS data. Failure modes were evaluated using a scanning electron microscope. RESULTS: Both blood and saliva significantly affected resin-zirconia SBS as contaminants. After thermocycling, there was no statistically significant difference between SBS obtained after decontamination with the Katana Cleaner (blood, 6.026 ± 2.805 MPa; saliva, 5.206 ± 2.212 MPa) or Ivoclean (blood, 7.08 ± 3.309 MPa; saliva, 6.297 ± 3.083 MPa), and the control group (no contamination, 7.479 ± 3.64 MPa). Adhesive and mixed failures were the most frequent among the tested groups. CONCLUSION: Both 10-MDP-containing cleaner (Katana Cleaner) and zirconium oxide-containing cleaner (Ivoclean) could eliminate the negative effect of saliva and blood contamination on resin-zirconia SBS.

Placement of Posterior Composite Restorations: A Cross-Sectional Study of Dental Practitioners in Al-Kharj, Saudi Arabia.

Dental practitioner-related factors can affect the quality of composite restorations. This study aimed to investigate the clinical techniques used by dental practitioners (DPs) while placing direct posterior composite restorations. METHODS: A questionnaire survey that sought information related to the placement of posterior composite restorations was delivered to 161 DPs working in the Al-Kharj area, Saudi Arabia. The collected data were statistically analyzed using Pearson's Chi-square test and Fisher's exact test considering the DP's working sector and the answered questions. RESULTS: A total of 123 DPs completed the survey (76.4% response rate). There was a statistically significant difference between DPs working in the private sector and those working in the governmental sector in 7 out of 17 questionnaire items namely: preparing a minimum depth of 2 mm, (p = 0.001); mechanical means of retention, (p = 0.003); operative field isolation, (p = 0.004); adhesive strategy, (p < 0.001); light-curing unit used, (p = 0.013); the use of radiometer, (p = 0.023), and dental matrix selection, (p < 0.001). CONCLUSION: The clinical techniques applied by DPs working in the private sector in Al-Kharj, Saudi Arabia when placing posterior composite restorations, including the specifications of cavity preparation, operative field isolation, and selection of the dental matrix system, may be substandard compared to those applied by DPs working in the governmental sector.

Investigation of the Near-Tip Stress Field of a Notch Terminating at a Bi-Material Interface.

The article deals with the problem of a sharp corner, the tip of which is located on the bi-material interface. The paper presents a qualitative and quantitative description of singular stress fields occurring in the tip area of such a stress concentrator. The qualitative description was obtained by solving the problem of the plane theory of elasticity with appropriately defined boundary conditions. To obtain a quantitative description, it was necessary to determine the values of generalised stress intensity factors (GSIFs). The GSIFs were determined using the developed analytical-numerical method. The calculations were made for various load variants (uniaxial/biaxial tension load, shear load) and notch positions (single/double edge-notched plate, centre-notched plate). Additionally, the impact of notch geometry (height and opening angle) and relative stiffness (Young's moduli ratio of both components of bi-material) on GSIFs was investigated. It has been noticed that with a decrease in the relative stiffness and an increase in the notch angle or its height, the normalised GSIFs values increased. The obtained results were compared with the data available in the literature and their satisfactory agreement with those presented by other scientists was found.

Effect of Non-Thermal Atmospheric Plasma on Micro-Tensile Bond Strength at Adhesive/Dentin Interface: A Systematic Review.

OBJECTIVE: The objective of this review was to evaluate the effect of non-thermal atmospheric plasma (NTAP) on adhesives resin-dentin micro-tensile bond strength (µTBS) in previously published studies. METHODS: Electronic search was conducted using the Medline, Cochrane library, and Scopus databases. The included studies were laboratory studies that investigated the effect of NTAP on adhesives µTBS to coronal dentin. Studies that evaluated the effect of NTAP on bond strength to indirect substrates, enamel or root dentin, were excluded. The methodological quality of included studies was assessed. RESULTS: Thirteen studies were included in this systematic review. All the included studies were considered to have a medium risk of bias. NTAP significantly improved µTBS at 24 h or after short-term aging in five studies (38.5%) and both immediate and after long-term aging in 5 studies (38.5%). In two studies (15.4%), NTAP resulted in a short-term material-dependent effect that was not stable after long-term aging. Interestingly, in one study (7.7%), NTAP had a positive effect only in the etch-and-rinse (ER) mode after long-term aging. CONCLUSION: Within the limitations of this systematic review, NTAP application could enhance resin-dentin µTBS of ER adhesives or universal adhesives (UAs) applied in the ER mode. In the ER mode, the rewetting step after NTAP seems to be unnecessary. Because of the limited information currently available in the literature, further studies are required to evaluate the effect of the NTAP application on self-etch (SE) adhesives or UAs applied in the SE mode.

Idiopathic Hypertrophic Pyloric Stenosis with Complete Ladd's Band: A Rare Association.

A male infant aged 45 days presented with projectile nonbilious vomiting for 2 weeks. Ultrasound showed picture of idiopathic hypertrophic pyloric stenosis. Laparoscopic pyloromyotomy was done, but postoperative vomiting that was mainly nonbilious continued without improvement. After 4 days of persistent vomiting, laparoscopic exploration was done and complete pyloromyotomy was confirmed and malrotation with complete Ladd's band was found, then case converted to open laparotomy and Ladd's procedure was done. Postoperatively, vomiting stopped completely and baby began gradual feeding till reaching full feed. Despite that the presentation of concurrent Idiopathic Hypertrophic Pyloric Stenosis with malrotation is extremely rare; a formal laparoscopic abdominal exploration should be done as the first step before proceeding to pyloromyotomy.

Effect of universal adhesives on microtensile bond strength to hybrid ceramic.

BACKGROUND: The aim of this study was to evaluate the effect of universal adhesives (UA) and silane on the microtensile bond strength (µTBS) of resin cement to a hybrid ceramic Vita Enamic (VE). METHODS: VE specimens were acid etched using hydrofluoric acid (HF) and were assigned to three groups (n = 10) based on the applied bonding technique. In group 1 (S), a silane-based primer was used as a surface treatment prior to the application of a resin cement (Variolink Esthetic DC). In group 2, a silane-containing UA, Clearfil Universal Bond (CUB) was used for the surface treatment, and in group 3, A silane-free UA, Tetric N-Bond Universal (TNU) was used for surface treatment. Resin cement build-ups were prepared. The bonded specimens were sectioned into resin-ceramic beams. Half of the beams of each group were stored for 24 h at 37 °C and the other half were subjected to a thermo-cycling aging. The microtensile bond strength (µTBS) was measured at a crosshead speed of 0.5 mm/min. Failure modes were assessed accordingly. Data were analyzed using a) two-way analysis of variance ANOVA followed by one-way ANOVA and Tukey tests between groups and b) independent t-test to detect differences (α = 0.05) for each group. The surface topographies of the ceramic surface were evaluated using scanning electron microscopy. RESULTS: The results showed that silane-based primer (S) application resulted in significantly higher (p < 0.05) µTBS values after 24 h and after thermocycling compared to both silane-containing UA (CUB) and silane-free UA (TNU). The µTBS values of all groups were significantly reduced after thermocycling. No statistically significant difference was observed between the µTBS of CUB and TNU after 24 h. However, TNU showed significantly higher µTBS after thermocycling. Different failure modes were observed, and adhesive failure was the most common in all groups. Marked surface topographic changes were observed following HF etching. CONCLUSION: It is concluded that, the UAs tested cannot be recommended as substitutes to the silanization of Hybrid ceramic.

Structure-based design generated novel hydroxamic acid based preferential HDAC6 lead inhibitor with on-target cytotoxic activity against primary choroid plexus carcinoma.

Histone deacetylase 6 (HDAC6) is an attractive target for cancer therapeutic intervention. Selective HDAC6 inhibitors is important to minimise the side effects of pan inhibition. Thus, new class of hydroxamic acid-based derivatives were designed on structural basis to perform preferential activity against HDAC6 targeting solid tumours. Interestingly, 1-benzylbenzimidazole-2-thio-N-hydroxybutanamide 10a showed impressive preference with submicromolar potency against HDAC6 (IC50 = 510 nM). 10a showed cytotoxic activity with interesting profile against CCHE-45 at (IC50 = 112.76 µM) when compared to standard inhibitor Tubacin (IC50 = 20 µM). Western blot analysis of acetylated-α-tubulin verified the HDAC6 inhibiting activity of 10a. Moreover, the insignificant difference in acetylated-α-tubulin induced by 10a and Tubacin implied the on-target cytotoxic activity of 10a. Docking of 10a in the binding site of HDAC6 attributed the activity of 10a to π-π stacking with the amino acids of the hydrophobic channel of HDAC6 and capture of zinc metal in bidentate fashion. The therapeutic usefulness besides the on-target activity may define 10a as an interesting safe-lead inhibitor for future development.

Bond strength of universal adhesives to air-abraded zirconia ceramics.

The bond strength of universal adhesives to air-abraded zirconia ceramic was evaluated. Overall, 40 zirconia ceramic blocks with dimensions of 6 × 6 × 4 mm were cut from pre-sintered blanks. The sintered blocks were embedded in self-cured acrylic resin. The zirconia blocks were then randomly allocated to four groups (n = 10) in which different universal adhesives were used, except for the control group in which no universal adhesive was used. A silicon mold was used to build the resin cement. All specimens were stored in distilled water for 24 h at 37°C and mounted on a universal testing machine. They were then subjected to shear bond strength testing at a cross-speed of 0.5 mm/min until failure occurred. The failure modes were analyzed using a digital microscope at 50× magnification. Univariate one-way analysis of variance and Tukey's post-hoc test were used for statistical analysis. Compared with the control group, the groups with universal adhesives showed statistically significant differences (P < 0.05). In addition, there was no statistically significant difference in the bond strengths of the groups with universal adhesives (P > 0.05) . After 24 h of storage, the cementation bond to air-abraded zirconia ceramic was improved by the application of a universal adhesive.

Role of CCR5Δ32 mutation in protecting patients with Schistosoma mansoni infection against hepatitis C viral infection or progression.

Schistosomiasis has been incriminated in the significant increase in hepatitis C virus (HCV) infections, although the association has not been adequately explained. We hypothesized that the CCR5Δ32 mutation may be involved in the high prevalence of HCV with schistosomiasis. The aim was to explore the association between the CCR5Δ32 mutation in schistosomiasis patients and protection against HCV infection or progression. We compared 220 schistosomiasis patients (S group) and 190 patients with HCV and schistosomiasis (HCV/S group) for the presence of the CCR5Δ32 mutation. Clinical, biochemical, and radiological assessments were done. HCV infection was diagnosed with anti-HCV antibodies and a recombinant HCV antigen-based rapid immunochromatographic test, and confirmed by HCV reverse transcriptase PCR. HCV genotyping was done by reverse hybridization line probe assay. Schistosomiasis was diagnosed by FAST-ELISA and indirect hemagglutination for Schistosoma mansoni antibodies, and stool analysis for ova. Polymorphisms of the CCR5 receptor gene were assessed by PCR-based genotyping of the 32-bp deletion at the CCR5 locus in whole blood. Of HCV/S patients, 91.6 vs. 91.8 % of S patients had CCR5 WT/WT homozygosity (nonmutants). Heterozygous and homozygous CCR5Δ32 mutation patterns (CCR5Δ32/WT and CCR5Δ32/Δ32) were distributed similarly in the HCV/S and S groups (6.8 vs. 7.2 % and 0.53 vs. 0.90 %, respectively; p > 0.05, OR = 0.97). Genotype 4 was the predominant viral genotype (93 % of cases). No differences were observed in CCR5 gene patterns according to viral genotype, viral RNA count, or ALT level. However, CCR5Δ32 mutants (homozygous and heterozygous) had a lower rate of severe hepatic fibrosis vs. nonmutants (27 vs. 42 %, p = 0.101, OR = 0.51). Moreover, 53.4 % of CCR5Δ32/WT mutants showed spontaneous viral clearance vs. 26.2 % of nonmutants (p = 0.000, OR = 4.1). In conclusion, no association was detected between the CCR5Δ32 mutation and HCV disease susceptibility in schistosomiasis patients. However, patients with the CCR5Δ32 mutation and HCV infection were less prone to severe hepatic fibrosis and more likely to have spontaneous viral clearance than patients with the nonmutant genotype.

CEBPA gene mutations in Egyptian acute myeloid leukemia patients: impact on prognosis.

AIM: To assess the prognostic role of myeloid transcription factor gene CEBPA (CCAAT/enhancer binding protein-α), a novel gene involved in leukemia in Egyptian adults AML. MATERIALS AND METHODS: Screening for CEBPA mutations was assessed using PCR-single-strand conformation polymorphism (PCR-SSCP) in pretreatment bone marrow samples from 55 newly diagnosed adult AML. RESULTS: CEBPA mutations were found in 11 (20%) of 55 AML patients. They had significantly higher hemoglobin (P = 0.037), and lower LDH (P = 0.003) levels when compared to those without. CEBPA mutations were frequently detected in M4 (45.5%) and M2 (27.2%) subtypes, and significantly associated with normal karyotype (90.9%, P = 0.007). We distinguished six cases with two different mutations or one homozygous mutation (CEBPA(double-mut)) as well as five cases with only one single heterozygous mutation (CEBPA(single-mut)). Patients with CEBPA mutations had significantly higher complete remission (P = 0.047), lower mortality (p = 0.047). Double CEBPA mutant cases showed longer disease free survival (DFS) and overall survival (OS) when compared to wild type CEBPA (for DFS; median = 27 versus 24 months respectively; P = 0.009 and for OS; median = 28 versus 25 months respectively; p = 0.008). No significant differences were found between CEBPA(single-mut) cases and wild type cases regarding DFS and OS (for DFS; median = 13 versus 24 months respectively; P = 0.615 and for OS; median = 14 versus 25 months respectively; P = 0.703). CONCLUSION: CEBPA mutation status is known to be a prognostic factor for favorable outcome in AML patients. CEBPA(double-mut) is associated with favorable DFS and OS. In contrast, CEBPA(single-mut) AMLs survival studies did not differ significantly with wild-type cases. These results demonstrate significant underlying heterogeneity within CEBPA mutation positive AML with prognostic relevance. Based on these findings, we propose that CEBPA(double-mut) should be clearly defined from CEBPA(single-mut) AML and considered as a separate entity in the classification of AML. Furthermore, incorporation of CEBPA mutation status into novel risk-adapted therapeutic strategies in Egypt will improve the currently disappointing cure rate of this group of patients.

Cardiac remodeling caused by transgenic overexpression of a corn Rac gene.

Rac1-GTPase activation plays a key role in the development and progression of cardiac remodeling. Therefore, we engineered a transgenic mouse model by overexpressing cDNA of a constitutively active form of Zea maize Rac gene (ZmRacD) specifically in the hearts of FVB/N mice. Echocardiography and MRI analyses showed cardiac hypertrophy in old transgenic mice, as evidenced by increased left ventricular (LV) mass and LV mass-to-body weight ratio, which are associated with relative ventricular chamber dilation and systolic dysfunction. LV hypertrophy in the hearts of old transgenic mice was further confirmed by an increased heart weight-to-body weight ratio and histopathology analysis. The cardiac remodeling in old transgenic mice was coupled with increased myocardial Rac-GTPase activity (372%) and ROS production (462%). There were also increases in α(1)-integrin (224%) and ß(1)-integrin (240%) expression. This led to the activation of hypertrophic signaling pathways, e.g., ERK1/2 (295%) and JNK (223%). Pravastatin treatment led to inhibition of Rac-GTPase activity and integrin signaling. Interestingly, activation of ZmRacD expression with thyroxin led to cardiac dilation and systolic dysfunction in adult transgenic mice within 2 wk. In conclusion, this is the first study to show the conservation of Rho/Rac proteins between plant and animal kingdoms in vivo. Additionally, ZmRacD is a novel transgenic model that gradually develops a cardiac phenotype with aging. Furthermore, the shift from cardiac hypertrophy to dilated hearts via thyroxin treatment will provide us with an excellent system to study the temporal changes in cardiac signaling from adaptive to maladaptive hypertrophy and heart failure.

Helicobacter Pylori DNA in Liver Tissues From Chronic Hepatitis C Egyptian Patients.

BACKGROUND: Hepatitis C virus (HCV) is considered the most common etiology of chronic liver disease in Egypt, which may progress to cirrhosis and hepatocellular carcinoma (HCC). Previous studies have documented an association between Helicobacter pylori (H. pylori) infection and liver cirrhosis with or without HCC. This study aimed to investigate the presence of H. pylori DNA in the liver tissue of Egyptian patients with chronic hepatitis C (CHC). METHODS: Fifty-two CHC Egyptian patients were enrolled in this study. Plasma anti-H. pylori IgG was assessed with ELISA. Liver biopsies were tested for presence of Helicobacter DNA using genus specific nested polymerase chain reaction (PCR) and species was identified by sequencing. RESULTS: Anti-H. pylori IgG was detected in 31/52 (59.6%) CHC patients while Helicobacter DNA was detected in 6 (11.5%) patients, all were H. Pylori by sequencing. Helicobacter DNA was more frequent in patients with high stage liver fibrosis (33.3%) than in those with low stage fibrosis (2.7%) (P = 0.006). There was no association between the presence of H. pylori DNA in the liver and age, gender of patients, liver function tests, AFP levels or viral load. CONCLUSIONS: These data confirm the presence of H. pylori DNA in liver of some CHC Egyptian patients and suggest an association of this bacterium with progression of liver fibrosis.

Vascular hypertrophy-associated hypertension of profilin1 transgenic mouse model leads to functional remodeling of peripheral arteries.

Increased mechanical stress/hypertension in the vessel wall triggers the hypertrophic signaling pathway, resulting in structural remodeling of vasculature. Vascular hypertrophy of resistance vessels leads to reduced compliance and elevation of blood pressure. We showed before that increased expression of profilin1 protein in the medial layer of the aorta induces stress fiber formation, triggering the hypertrophic signaling resulting in vascular hypertrophy and, ultimately, hypertension in older mice. Our hypothesis is that profilin1 induced vascular hypertrophy in resistance vessels, which led to elevation of blood pressure, both of which contributed to the modulation of vascular function. Our results showed significant increases in the expression of alpha(1)- and beta(1)-integrins (280 + or - 6.3 and 325 + or - 7.4%, respectively) and the activation of the Rho/Rho-associated kinase (ROCK) II pathway (260 and 350%, respectively, P < 0.05) in profilin1 mesenteric arteries. The activation of Rho/ROCK led to the inhibition of endothelial nitric oxide synthase expression (39 + or - 5.4%; P < 0.05) and phosphorylation (35 + or - 4.5%; P < 0.05) but also an increase in myosin light chain 20 phosphorylation (372%, P < 0.05). There were also increases in hypertrophic signaling pathways in the mesenteric arteries of profilin1 mice such as phospho-extracellular signal-regulated kinase 1/2 and phospho-c-Jun NH(2)-terminal kinase (312.15 and 232.5%, respectively, P < 0.05). Functional analyses of mesenteric arteries toward the vasoactive drugs were assessed using wire-myograph and showed significant increases in the vascular responses of profilin1 mesenteric arteries toward phenylephrine, but significant decreases in response toward ROCK inhibitor Y-27632, ACh, sodium nitrite, and cytochalasin D. The changes in vascular responses in the mesenteric arteries of profilin1 mice are due to vascular hypertrophy and the elevation of blood pressure in the profilin1 transgenic mice.