Biochar supported metallo-inorganic nanocomposite: A green approach for decontamination of heavy metals from water.

Heavy metal contamination of water has become a global environmental burden, which has stirred up agitation worldwide. Fabrication of adsorbents utilizing either low cost, environment friendly materials or waste products can be helpful in remediating environmental pollution. The current study evolved around the synthesis of nanocomposites derived from such raw precursors like spent tea waste biochar, hydroxyapatite, and clays. In this context, two nanocomposites, namely manganese ferrite doped hydroxyapatite/kaolinite/biochar (TK-NC) and manganese ferrite doped hydroxyapatite/vermiculite/biochar (TV-NC), were synthesized followed by their employment for decontamination of heavy metals from aqueous media. TK-NC and TV-NC exhibited the crystallite sizes in the range of 2.55-5.94 nm as obtained by Debye Scherrer Equation and Williamsons-Hall equation The fabricated nanocomposites were characterized using FT-IR, SEM-EDX, and powder XRD. Batch adsorption studies were performed, and influence of different adsorption parameters (contact time, reaction temperature, solution pH, adsorbent dose, and initial adsorbate concentration) on metal adsorption was examined. Thermodynamic studies revealed that the adsorption of Cr(VI), Ni(II) and Cu(II) on TK-NC and TV-NC was endothermic (+ΔH°) and indicates disorderness (+ΔS°) at the solid-liquid interface owing to the strong affinity of metal ions with adsorbent. The heavy metal uptake selectivity followed the following decreasing order; Cr(VI) > Cu(II) > Ni(II) by both nanocomposites, with adsorption capacities falling in the range of 204.68-343.05 mg g-1. Several adsorption kinetic and isotherm models were applied to experimentally calculated data, which suggest favorable adsorption of Cr(VI), Ni(II) and Cu(II) by TK-NC and TV-NC from the system while obeying general-order kinetics and R-P adsorption model, conferring the transition in adsorption kinetics order and involvement of multiple adsorption process.

Garlic and ginger essential oil-based neomycin nano-emulsions as effective and accelerated treatment for skin wounds' healing and inflammation: In-vivo and in-vitro studies.

Skin, largest organ of human, is directly exposed to environment and hence is prone to high rates of injuries and microbial infections. Over the passage of time these microbes have developed resistance to antibiotics making them ineffective especially in lower doses and hence, higher dosages or new drugs are required. The current study deals with designing of nano-emulsion (NE) formulations composed of garlic and ginger oils (0.1 %) with neomycin sulphate used in different ratios (0.001, 0.01 and 0.1 %) and combinations. The resulting NEs were characterized for droplet size (145-304 nm), zetapotential (-3.0-0.9 mV), refractive index (1.331-1.344), viscosity (1.10-1.23cP), transmittance (96-99 %), FT-IR and HPLC and found stable over a period of three months. All NEs were also found effective against both gram positive and negative bacterial strains i.e., B. spizizenii, S. aureus, E. coli and S. enterica as compared to pure neomycin sulphate (NS) used as control with highest activity recorded for NE-2 and NE-4 against all strains showing zone of inhibition in range of 22-30 mm and 21-19 mm, respectively. NEs were also tested using rabbit skin excision wound model which potentiates that all the NEs resulted in early recovery with 86-100 % wound healing achieved in 9 days as compared to NS ointment (71 %). The studies confirmed that essential oils when used in combination with traditional drug can lead to much higher efficacies as compared to pure drugs.