Diagnosis consensus among endodontic specialists and general practitioners: An international survey and a proposed modification to the current diagnostic terminology.

INTRODUCTION: This survey aimed to determine the consensus amongst endodontic specialists in North America and practitioners worldwide to diagnose the pulp and periapical conditions of selected case scenarios encountered in daily practice using the American Association of Endodontists (AAE) pulpal and periapical diagnostic terms. Secondly, an attempt was made to suggest modifications in terms accordingly. METHODOLOGY: A survey designed by two endodontic educators was sent to endodontists in North America and clinicians worldwide through an electronic database. The survey included socio-demographic questions followed by the clinical and radiographic presentations of four clinical scenarios. The participants were then requested to provide the pulpal and the periapical diagnosis of 11 teeth presented in these cases (22 answers in total/participant) using the AAE diagnostic terminology. Cases were designed to include 12 pulpal/periapical conditions as control (non-controversial conditions) and ten so-called controversial conditions. A proportion threshold of 10% was required for any diagnostic term to be reported in this survey. The participants were divided into two groups based on the region of endodontic training and/or practice to 'Specialised North American' or 'International Practitioners,' and their results were statistically compared using chi-squared tests (p < .05). RESULTS: The survey included 421 participants. 74% were endodontists, and 46.1% were amongst the 'Specialised North American' group and 53.9% amongst the 'International Practitioners'. Eleven of 12 control conditions had an almost complete agreement amongst the participants regarding the diagnostic terms selected, ranging between 82% and 96%, with no other diagnostic term exceeding the 10% threshold. All the controversial conditions yielded more than one diagnostic term selected/condition that exceeded the 10% threshold for groups ('Specialised North American' and 'International practitioners'). There were no differences in the diagnostic terms selected between the two groups; however, the weight for each term varied between the groups in some cases. CONCLUSION: There is a lack of consensus amongst clinicians, regardless of their training and region of practice, on the appropriate diagnostic terms to be used in particular clinical conditions. More diagnostic terms and modifications in the current terms may be required to establish a more reliable diagnostic terminology.

CBCT Patterns of Bone Loss and Clinical Predictors for the Diagnosis of Cracked Teeth and Teeth with Vertical Root Fracture.

INTRODUCTION: This study aimed to identify clinical and radiographic characteristics of teeth with longitudinal fractures to assist in the diagnosis and differentiation between cracked teeth and teeth with vertical root fracture (VRF). METHODS: Ninety-five patients (95 teeth) diagnosed with a longitudinal fracture (only cracked teeth or VRF) through clinical visualization of the fracture line were included in this study. Clinical and radiographic data were collected from the patients' records to identify the characteristics associated with each condition. Fifty-four patients (54 teeth) had full radiographic (periapical [PA] radiography and a cone-beam computed tomographic [CBCT] scan) and clinical findings (probing depths and clinical images of the fracture line). PA and CBCT images were evaluated by 2 independent examiners to identify the different patterns of bone loss associated with these teeth (no defect, an angular defect, a J-shaped defect, or a combined defect). Cohen kappa analysis was used to compare the results between the 2 examiners and between the findings of the PA and CBCT images. Pearson chi-square analysis, the Fisher exact test, and adjusted Bonferroni post hoc testing were used to establish an association between the type and extension of the longitudinal fracture with the probing depth, the CBCT pattern of bony defects, and the presence/absence of the buccal plate and also to compare the clinical and radiographic characteristics of cracked teeth and teeth with VRF (P < .05). RESULTS: CBCT images had 4.4 times the odds of detecting bony defects suggestive of longitudinal fractures compared with PA radiographs. Teeth with VRF were more associated with indirect restorations, deep probing (>6 mm), absence of the cortical plate, and a J-shaped defect on the CBCT image (P < .05). On the other hand, cracked teeth were associated with direct restorations, shallow probing (<6 mm), an intact cortical plate, and the presence of an angular defect on the CBCT image (P < .001). There was a significant correlation between a radicular extension of the fracture line and deep probing as well as J-shaped defects (P < .05). CONCLUSIONS: Patterns of bone loss on CBCT imaging can likely differentiate between cracked teeth and teeth with VRF. The presence of an angular defect may suggest the presence of a crack in the tooth before intervention. J-shaped defects, deep probing (>6 mm), and loss of the cortical plate are likely suggestive of VRF.

Influence of acidic pH on antimicrobial activity of different calcium silicate based-endodontic sealers.

OBJECTIVE: To investigate the antibacterial activity of calcium silicate-based sealers (CSBSs) against Enterococcus faecalis biofilm in a neutral or acidic condition. MATERIALS AND METHODS: Dentin cylinders (4 mm length) were prepared and infected with 3-week-old E. faecalis. The samples were filled with BioRoot RCS (BR), EndoSequence BC (ES), and NeoMTA Plus (NMTA) and incubated in either neutral or acidic conditions for 7 days (n=10/group). Sterile or infected samples alone were used as the positive and negative control. The root canal sealers were removed after 7 days, and the remaining bacteria on dentinal walls were determined by colony-forming units (CFUs/ml), and three samples from each group were visualized under a confocal laser scanning microscope (CLSM). The pH was also measured (n=3/group) after 4 h and 7 days of incubation at 37°C in both conditions. RESULTS: In the neutral condition, all sealers significantly decreased the log-CFU values (p<0.05), while in the acidic condition, the log-CFU reduction was less for ES and NMTA, but a higher reduction was observed in BR (p<0.05). The antibacterial activity of CSBSs was similar in neutral conditions (p>0.05), and BR showed a greater antibacterial effect than ES and NMTA in the acidic condition (p<0.05). The pH of BR, ES, and NMTA ranged from 8.2 to 8.8 in the neutral condition in the presence of dentin after 7 days. However, acidic conditions reduced the pH values to 7.8 for BR, 6.0 for ES, and 5.8 for NMTA. CONCLUSIONS: All CSBSs showed similar antibacterial activity in neutral conditions, while acidic pH had a reducing antibacterial effect on CSBSs. CLINICAL RELEVANCE: Inflammatory pH decreased the antibacterial properties of CSBSs depending on the sealer type.

A new direction in managing avulsed teeth: stem cell-based de novo PDL regeneration.

Management of avulsed teeth after replantation often leads to an unfavorable outcome. Damage to the thin and vulnerable periodontal ligament is the key reason for failure. Cell- or stem cell-based regenerative medicine has emerged in the past two decades as a promising clinical treatment modality to improve treatment outcomes. This concept has also been tested for the management of avulsed teeth in animal models. This review focuses on the discussion of limitation of current management protocols for avulsed teeth, cell-based therapy for periodontal ligament (PDL) regeneration in small and large animals, the challenges of de novo regeneration of PDL on denuded root in the edentulous region using a mini-swine model, and establishing a prospective new clinical protocol to manage avulsed teeth based on the current progress of cell-based PDL regeneration studies.

Access Cavity Preparations: Classification and Literature Review of Traditional and Minimally Invasive Endodontic Access Cavity Designs.

INTRODUCTION: Several endodontic access cavity designs have been proposed in the past decade to access the root canal space in a minimally invasive manner. The rationale for this approach was derived from the assumption that preserving more tooth structure during access preparation will improve the tooth's resistance to fracture and its long-term survivability. However, is this assumption valid? Also, can this approach compromise other treatment-related aspects? METHODS: We conducted a literature review using 4 online databases and classified the access cavity designs presented in each article according to our proposed classification. RESULTS: Through the literature search, we identified 49 articles that evaluated the effect of the access cavity design on 11 different treatment parameters. The majority of the studies failed to demonstrate clear benefits of the minimally invasive access designs, whereas others raised concerns regarding the ability to adequately disinfect, fill, and restore teeth with a minimally invasive access cavity design. CONCLUSION: Minimally invasive access cavity designs present more risk than benefit on the outcome of endodontic treatment. Clinicians should reconsider the application of a minimally invasive access cavity for routine endodontics and cautiously apply it in selected cases when the proper armamentarium is available.

Antibacterial Effect and Bioactivity of Innovative and Currently Used Intracanal Medicaments in Regenerative Endodontics.

INTRODUCTION: The purpose of this study was to determine the antibacterial effect and bioactivity of triple antibiotic paste (TAP), calcium hydroxide (Ca[OH]2), and calcium hypochlorite (Ca[OCl]2). METHODS: Root canals were infected with 3-week-old Enterococcus faecalis biofilm and then medicated for 7 days with TAP, Ca(OH)2, or Ca(OCl)2 (n = 10/group). Untreated and uninfected canals were used as positive and negative controls. The antibacterial effect was determined using colony-forming units and a Live/Dead bacterial viability kit. Dental pulp stem cells were seeded on medicated dentin surfaces for 7 days. Sodium thiosulfate and various concentrations of ascorbic acid (1%, 5%, and 10%) were also used to neutralize the samples treated with Ca(OCl)2 before cell seeding (n = 3 in triplicate). Cell viability and morphology were evaluated using a viability assay and Live/Dead cell analysis. Alkaline phosphatase (ALP) activity was also measured to determine the cells' mineralization activity. RESULTS: All medicaments decreased the initial bacterial load (P < .05). The highest bacterial reduction in the main canal and dentinal tubules was observed in the Ca(OCl)2 group (P < .05). TAP- or Ca(OH)2-treated dentin surface improved cell viability and ALP activity compared with the untreated dentin surface (P < .05), whereas Ca(OCl)2 decreased cell viability and ALP activity (P < .05). Ten percent ascorbic acid neutralized the effect of Ca(OCl)2 on the treated dentin surface, showing higher cell viability (P < .05) and similar ALP activity with the untreated dentin surface and the other groups (P > .05). CONCLUSIONS: Ca(OCl)2 medication improved root canal disinfection against E. faecalis biofilm compared with TAP and Ca(OH)2. The adverse effects caused by Ca(OCl)2 on cell viability and mineralization activity can be neutralized with 10% ascorbic acid.

Selective Retreatment and Sinus Lift: An Alternative Approach to Surgically Manage the Palatal Roots of Maxillary Molars.

Endodontic microsurgery on the palatal root of maxillary molars presents a clinical challenge because of the root position and approximation from the maxillary sinus floor. Attempting a buccal or a palatal approach to address the root is associated with limited accessibility and visibility as well as the risk of injury to the maxillary sinus membrane and/or the greater palatine nerves and vessels. If all the maxillary molar roots require surgical intervention, two flaps may even be needed, which can make the procedure technically more difficult and lengthier. This case report presents 2 clinical cases in which apicoectomy was needed on the palatal roots of maxillary molars. The treatment includes selective nonsurgical retreatment of the palatal root and obturation using a root repair material followed by a surgical intervention from a buccal approach to treat the buccal roots, sinus lift using piezosurgery, and root resection of the palatal root. The approach was successful in both cases without any untoward events. We monitored the radiographic changes using cone-beam computed tomographic imaging immediately after the surgery and at multiple follow-up appointments. The cone-beam computed tomographic images revealed healing of the periapical disease around all the roots up to 14 and 24 months and apical repositioning of the maxillary sinus floor.

Effect of heat application on the physical properties and chemical structure of calcium silicate-based sealers.

OBJECTIVE: To determine the effect of heat application on the setting and chemical properties of HiFlow BC Sealer and compare to other calcium silicate (CSBS) and epoxy resin-based root canal sealers. MATERIALS AND METHODS: AH Plus, BioRoot RCS (BioRoot), Endosequence BC (Endosequence), and HiFlow BC (HiFlow) sealers were placed at 37 °C or subjected to heat at 200 °C for 10 or 30 s, followed by incubation at 37 °C in a humidified incubator during experiments. Setting time, viscosity, and flow were assessed, and changes in chemical structure were evaluated using the Fourier-transform infrared spectroscopy (FTIR). Thermogravimetric analysis was also used to evaluate the weight change (%) of the sealers upon heating from room temperature to 37 °C or 200 °C at a rate of 20 °C/min. Data were analyzed using a two-way ANOVA with a Bonferroni post-hoc test (p = 0.05). RESULTS: Application of heat extended the setting time for Endosequence and HiFlow but resulted in a faster setting of AH Plus and BioRoot. The highest flow and lower viscosity were observed in HiFlow at high temperature (p < 0.05), whereas the lowest flow with the highest viscosity and greatest weight loss were observed in BioRoot after heat application (p < 0.05). FTIR spectra demonstrated no changes to functional groups after heat application, except for the strong H-O-H absorption peak corresponding to water in BioRoot. CONCLUSIONS: Endosequence and HiFlow showed similar chemical properties with a higher flow and lower viscosity in HiFlow after heat application. Heat application resulted in reduced flow, increased viscosity, and weight loss for BioRoot. The setting of AH Plus was fastened with heat, while its weight loss, viscosity, and flow characteristics were stable. CLINICAL RELEVANCE: HiFlow, Endosequence, and AH Plus can be all used with WVC obturation techniques. Heat application resulted in minor changes in their physical properties including setting time, flow, weight loss, and chemical properties, while BioRoot showed a significant amount of weight loss, increase in viscosity, and reduced flowability after heat application.

Management of Root Fenestration Using Buccal Decortication and Guided Tissue Regeneration: A Case Report and 3-dimensional Analysis.

The management of patients with apical fenestration and clinical symptoms has always been limited to apical root resection and placement of the root tip within the bony crypt. This result would often present resolution of clinical symptoms based on a few case studies. In this case report, we present a case in which apical resection alone did not resolve the patient's discomfort; on the contrary, it resulted in further bone loss and persistence of clinical symptoms. A corrective surgery was performed with the use of guided bone regeneration in conjunction with decortication of the cortical plate to induce bleeding. The patient symptoms resolved within a few weeks after the surgery, and the follow-up scan showed apical root coverage. Three-dimensional analysis was performed to compare the bony changes between the 2 surgeries and showed a significant amount of bone gain of around 200 mm3 and a 2-mm linear bone gain opposite the distobuccal root. The case presents a conservative approach to manage root fenestration of the buccal plate without further compromising the root apex.

Pulp/Dentin Regeneration: It Should Be Complicated.

Stem cell-mediated regenerative endodontics has reached the human clinical trial phase; however, many issues still exist that prevent such technology to be a widely used clinical practice. These issues are not straightforward and are complicated. They should be because pulp regeneration is dealing with a small dead-end space. In addition, when regeneration is needed, the space is often heavily infected. The true standard of pulp regeneration should be everything except generation of some fibrous connective tissue and amorphous mineral deposit. As of now, we are still far short of reaching the standard of complete vascularized and innervated pulp regeneration with newly formed tubular dentin in all types of teeth. Thus, we need to go back to the bench and use established animal models or create new animal models to tackle those issues. This article will address several key issues including the possibility of pulp regeneration in small canals of molar teeth by enhancing the neovascularization, and whether the organized tubular dentin can be generated on the canal walls. Data from our semi-orthotopic tooth fragment mouse model have shown that complete pulp regeneration using dental pulp stem cells (DPSCs) in small canal has been inconsistent because of limited blood supply. This inconsistency is similar in our orthotopic miniature swine model, although in some cases vascularized pulp-like tissue can be formed throughout the canal space after DPSC transplantation. Furthermore, no tubular dentin was observed in the orthotopic pulp regeneration, despite the fact that DPSCs have the capacity to generate some tubular dentin-like structure in the hydroxyapatite/tricalcium phosphate-mediated ectopic pulp/dentin formation model in mice. Potential strategies to be tested to address these regeneration issues are discussed herein.

Antimicrobial Activity and Biocompatibility of Antibiotic-Loaded Chitosan Hydrogels as a Potential Scaffold in Regenerative Endodontic Treatment.

INTRODUCTION: The objective of this study was to determine the effectiveness of several antibiotic-loaded hydrogel scaffolds against Enterococcus faecalis, as well as their ability to stimulate proliferation and mineralization of dental pulp stem cells. METHODS: Fibrin (Fg) or chitosan-fibrin hydrogels (Ch) were prepared using 12.5 mg/mL fibrinogen and 0.4% (w/v) chitosan. Triple antibiotics, clindamycin-modified triple antibiotic paste, or double antibiotics were loaded in gels (1 mg/mL). Antibacterial effect against E. faecalis biofilm was determined by using colony-forming units (CFUs) and confocal laser scanning microscope (CLSM). Cell viability and morphology were determined by loading cells into different gels at 7 and 14 days using the water-soluble tetrazolium salt-1 cell viability assay and Live & Dead cell analysis. Mineralization was detected by using alkaline phosphatase and alizarin red staining activity. RESULTS: Antibiotic-loaded Fg gel and Ch gel alone without antibiotics resulted in a significant reduction in CFUs compared with the positive control (P < .05). When antibiotics were loaded in Ch gel, there were no CFUs detected in any groups (P < .05). CLSM images showed dense red areas with mostly dead bacteria on the dentin surface in antibiotic-loaded Ch groups, which showed significantly less live bacteria compared with the other groups (P < .05). Triple antibiotic-loaded Fg and Ch gels resulted in a dramatic decrease in the mineralized nodule formation compared with all other gel groups (P < .05). Ch hydrogels resulted in round cell morphology up to 7 days. Ch alone or with double antibiotic paste showed more cell spreading with spindle-shaped morphology at 14 days and higher alkaline phosphatase activity compared with other antibiotic-loaded Ch groups (P > .05). CONCLUSIONS: Double antibiotic-loaded Ch gel appears to enhance the antibacterial properties while maintaining higher cell viability, cell spreading, and mineralization activity, compared with all the other scaffolds investigated.

Soft and Hard Tissue Remodeling after Endodontic Microsurgery: A Cohort Study.

INTRODUCTION: The aim of this study was to investigate the impact of the incision type, with or without a coronally repositioning flap (CRF), on soft tissue healing and crestal bone remodeling after endodontic microsurgery (EMS). METHODS: Clinical pictures and cone-beam computed tomography images from 47 patients (120 teeth) taken before surgery and at the follow-up appointment were included in this study. Clinical pictures were qualitatively evaluated by 2 endodontists for the gingival marginal level (GML) (recession, same position, or coronal root coverage), papillary height (same position/receded), and for presence/absence of scars for each tooth. Cone-beam computed tomography images were used to calculate the changes in the distance between the cementoenamel junction and the crestal bone level (CBL) between the preoperative and follow-up scans. Statistical analyses were performed to determine a correlation between patient-related factors (age, sex, tooth type, position, and presence/absence of a crown), incision techniques, and changes within the CBL. RESULTS: Gingival recession was more prevalent in mandibular teeth, molar teeth, and teeth that received intrasulcular or papilla-based incisions (P < .05). Scar formation was affected by the flap design (P < .05). CRF was the only technique resulting in coronal root coverage (P < .05). There were no changes observed in the papillary height between the various flap designs. There was also no statistically significant difference in the crestal bone height between the preoperative and follow-up scan measurements (P > .05). CONCLUSIONS: Soft tissue changes are evident after EMS and can be affected by the flap design selected, as well as the site being treated. Application of CRF can improve the position of GML after EMS. There are insignificant changes within the CBL at the facial aspect of the root after EMS.

Nanobubble-Enhanced Antimicrobial Agents: A Promising Approach for Regenerative Endodontics.

INTRODUCTION: In this study, we investigated the properties of nanobubble (NB) water and its effect on smear layer removal and strengthening the efficiency of disinfecting agents used in regenerative endodontic treatment. METHODS: NB water was generated in a NB Generator. The NB size, concentration, and pH were measured. Porcine teeth were enlarged to size 60 by using hand-files and irrigated with either NB water or 17% EDTA or received no further irrigation. The ability of irrigants to remove the smear layer was evaluated by using a scanning electron microscope (9 roots/group). Other samples (6 roots/group) were subjected to Vickers hardness test to determine the dentin microhardness. Autofluorescent tetracycline mixed with distilled water or NB water was placed inside the root canal space of porcine teeth, and the depth of medicament penetration into the dentinal tubules was visualized by using fluorescent stereomicroscope (5 roots/group). For the disinfection experiment, human roots were prepared, autoclaved, and inoculated with Enterococcus faecalis for 3 weeks. Canals were then disinfected by (1) standard needle irrigation (SNI) with 5.25% NaOCl, (2) 5.25% NaOCl with ultrasonication (US), (3) 5.25% NaOCl + XP finisher (XP), (4) SNI with 1.5% NaOCl, or (5) SNI with 1.5% NaOCl in NB water (5 roots/group). Teeth were split open and stained with LIVE/DEAD BackLight and visualized by using confocal laser scanning microscope (CLSM) at the coronal, middle, and apical thirds of the canal. The ratio of dead/total bacteria in the dentinal tubules at various depth levels (50, 100, and 150 µm) was calculated. RESULTS: NB water was more effective in removing smear layer than 17% EDTA and could allow infiltration of tetracycline into the dentinal tubule more than 1 mm. NB water did not alter the dentin microhardness compared with 17% EDTA (P < .05). At 50-µm depth, CLSM analysis showed no statistically significant difference between 1.5% NaOCl in NB water and 5.25% NaOCl with or without irrigation activation at the coronal, middle, and apical root segments (P > .05), ie, these groups had stronger bacterial killing than 1.5% NaOCl (P < .05). At deeper levels (100 and 150 µm), higher concentrations of NaOCl were more effective than 1.5% NaOCl with or without NB water. No statistically significant difference was noted between 5.25% NaOCl with and without irrigation activation at most depth levels (P > .05). CONCLUSIONS: NB water can allow smear layer removal and enhance tubular penetration of medicaments without changing dentin microhardness. In large canal models, NB water appears to improve the tubular disinfection capacity of lower concentration of NaOCl up to 50 µm. On the other hand, the use of irrigation activation (US or XP) did not provide any added disinfection into the dentinal tubules compared with SNI. These results suggest that NB water may be a promising adjunct to endodontic irrigants and medicaments.

Dentin Conditioning Protocol for Regenerative Endodontic Procedures.

INTRODUCTION: This study focused on the optimization of sodium hypochlorite-EDTA irrigation in terms of the viability and morphology of dental pulp stem cells (DPSCs) and the effects of an optimized EDTA protocol alone or prepared with nanobubble (NB) water on cell behavior. METHODS: In the first part, human dentin discs were conditioned with the following protocols: (1) Sodium hypochlorite followed by phosphate-buffered saline (PBS), (2) Irrigation protocol from group 1 followed by EDTA, (3) Irrigation protocol from group 2 followed by PBS, (4) Sodium hypochlorite followed by EDTA, (5) Irrigation protocol from group 4 followed by PBS. DPSC viability and morphology were determined. In the second part, dentin discs were conditioned with the (1) optimized protocol in the first part, (2) EDTA prepared using NB water, (3) ultrasonic-activated EDTA, or (4) ultrasonic-activated EDTA prepared using NB water. Transforming growth factor beta release and DPSC viability, morphology, and migration were determined using the enzyme-linked immunosorbent assay, the water-soluble tetrazolium salt-1 cell viability assay and live-dead assay, and the transwell migration assay, respectively. Data were analyzed using Kruskal-Wallis or one-way analysis of variance and post hoc tests. RESULTS: The highest cell viability was observed in group 3 followed by group 5 (P < .05) in which PBS was used as a final rinse. Irrigation protocol from group 3 was used for the subsequent experiments. Ultrasonic-activated EDTA improved transforming growth factor beta release, viability, and migration of the cells compared with EDTA (P < .05). The preparation of EDTA with NBs did not change the biological properties of the EDTA-conditioned dentin (P > .05). CONCLUSIONS: Removing the residual EDTA using PBS improved the cell viability on the dentin surface. Ultrasonic activation enhanced the growth factor release and biological properties, whereas the preparation of EDTA with NBs showed a similar effect to regular EDTA without compromising the cellular effect.

Higher Speed and No Glide Path: A New Protocol to Increase the Efficiency of XP Shaper in Curved Canals-An In Vitro Study.

INTRODUCTION: This in vitro study compared the performance of the XP-endo Shaper (XP; FKG, La Chaux-de-Fonds, Switzerland) in curved canals when used with a higher speed (3000 rpm) without a glide path with the manufacturer's protocol. METHODS: Twenty extracted mandibular molars with separate mesial curved canals were matched to obtain 2 standardized groups (n = 20). For the XP 1000 group, a glide path up to a size 15 hand file was performed followed by rotary instrumentation with the XP shaper at 1000 rpm, following the manufacturer's recommendations. For the canals in the XP 3000 group, the file was rotated at 3000 rpm after only negotiation the canal with a size 8 hand file (patency file). The operating time and the number of strokes taken to reach the working length (WL) and fit a 30/.04 gutta-percha cone to the WL were recorded. The shaping abilities were evaluated by micro-computed tomographic imaging and file deformation by scanning electron microscopy. Data were analyzed using analysis of variance and chi-square tests at a 5% significance level. RESULTS: The XP 3000 group required less time and strokes to reach the WL (P < .05) and resulted in a higher percentage of adequate cone fit (P < .05). No difference was found between groups regarding the micro-CT parameters, except for the taper, which was larger in the XP 3000 group in the apical and middle thirds (P < .05). No difference was found regarding file deformation between the 2 groups. CONCLUSIONS: The suggested protocol for the use of the XP (3000 rpm without a glide path) appears to be more efficient than the manufacturer's recommended protocol to prepare curved canals in vitro.

Classification and cyclic fatigue evaluation of new kinematics for endodontic instruments.

This study evaluated the effect of new motions of the motor TriAuto ZX2 on the cyclic fatigue of endodontic instruments. Vortex Blue 35.06 instruments were divided into four groups (n = 10) and tested for fatigue in a curved artificial canal (90° and 2 mm radius) using the following motions: continuous rotation (CR), Optimum Torque Reverse (OTR) set at 180° and the Optimum Glide Path (OGP), which was tested at 90° and 240°. The time to fracture (TTF) and the lengths of the fractured fragments were recorded. The mean TTF was significantly different among the groups (anova, P < 0.05): OGP 90° (213.39 ± 27.45), OTR 180° (121.24 ± 17.03), OGP 240° (45.24 ± 5.61) and CR (8.43 ± 1.27). Weibull analysis confirmed the shortest life expectancy for CR and the longest survival for OGP at 90°. The resistance to fatigue was affected by motions and pre-set angles. The proprietary movements that are currently available for endodontic instruments were classified according to their kinematics.

Comparison between Single-file Rotary Systems: Part 2-The Effect of Length of the Instrument Subjected to Cyclic Loading on Cyclic Fatigue Resistance.

INTRODUCTION: The aim of this study was to compare the cyclic fatigue resistance of XP Shaper (XP), HyFlex EDM One File (EDM), and WaveOne Gold Primary (WOG) when operated according to their manufacturers' recommendations at different lengths and to investigate the cyclic fatigue limit of XP Shaper when operated at 3000 rpm. METHODS: One hundred fifty instruments from 4 different rotary systems (F2 Protaper Universal [PTU], WOG, EDM, and XP) were tested for their cyclic fatigue resistance in a simulated 90° curved canal at a 37°C water bath temperature at 3 different working lengths (15 mm, 17 mm, and 19 mm). The time taken for instruments to fracture was recorded, and the number of cycles to failure was calculated. Statistical analyses were performed by using Levene's test, Kruskal-Wallis test to identify specific groups with statistically significantly higher cyclic fatigue resistance at 5% significance level. Weibull analysis was performed to determine the predictability of survival for each instrument. RESULTS: XP Shaper had the highest cyclic fatigue resistance compared with all other instruments, followed by EDM, WOG, and then PTU. There was no statistically significant difference in the number of cycles to failure between the XP operated at 3000 or 1000 rpm in any of the tested working lengths. There was a reduction in the number of cycles to failure when the working length increased from 15 to 19 mm in EDM, WOG, and PTU. Scanning electron microscopy showed ductile fractures with classic dimpled features in all samples. CONCLUSIONS: XP has a very high resistance to cyclic fatigue compared with WOG, EDM, and F2 PTU. The time to fracture will decrease by almost one third when XP is operated at 3000 rpm. The results of both parts of this study suggest that XP appears to be safe to operate at 3000 rpm in endodontic retreatment.

Comparison between Single-file Rotary Systems: Part 1-Efficiency, Effectiveness, and Adverse Effects in Endodontic Retreatment.

INTRODUCTION: The aim of this study was to evaluate in vitro the performance of 3 single-file systems: WaveOne Gold Primary (WOG; Dentsply Sirona, Ballaigues, Switzerland), Hyflex EDM "one file" (EDM; Coltene/Whaledent, Alstatten, Switzerland), and XP Shaper (XP; FKG, La Chaux de Fonds, Switzerland), for nonsurgical endodontic retreatment on mandibular anterior teeth in regard to the amount of remaining filling material inside the canal, debris extrusion, and operation time. METHODS: Sixty extracted standardized mandibular incisors presenting with a single oval canal were prepared to size 30.04 and obturated using warm vertical condensation. After 30 days (37°C, 100% humidity), teeth were randomly divided into 3 groups (n = 20) according to the file used for retreatment (WOG, EDM, or XP operated at 3000 rpm). During the retreatment procedures, preweighed vials were used to collect apically extruded debris, and the time required to remove the filling material was recorded in seconds. Cone-beam computed tomographic scans were taken before and after the retreatment to determine the amount of remaining filling material inside the root canal space. Statistical analysis was performed using the Kruskal-Wallis test, 1-way analysis of variance, and the Pearson test at a 5% significance level. RESULTS: There was a statistically significant difference among the groups regarding the instrumentation time (P < .05). XP was the fastest to remove gutta-percha from the canals (40.54 ± 28.03 seconds) followed by EDM (55.77 ± 19.76 seconds) and WOG (105.92 ± 53.92 seconds). The percentage of remaining filling was significantly greater for WOG (26.65% ± 14.63%) (P < .05). No difference was found between EDM (13.51% ± 9.53%) and XP (8.60% ± 7.28%). No difference was found regarding the amount of extruded debris among the 3 groups (P > .05). CONCLUSIONS: XP was the most efficient in gutta-percha removal from the canals when operated at a higher speed (3000 rpm) followed by EDM and WOG.